Personal Care INCI Name (CTFA Name) Properties PEG-200 Hydrogenated Glyceryl Palmate REWODERM® LI 520-70 is a very mild, vegetable based additive. Chemical and physical properties REWODERM® LI 520-70 exhibits a conditioning effect (not part of specifications) on the skin and hair. It has good thickener properties and contributes to Appearance (20 °C) slightly cloudy, viscous mildness in formulations. gel Additionally it is a good co-emulsifier. REWODERM® LI 520-70 is water soluble and soluble Application in: REWODERM® LI 520-70 is a multifunctional additive • Ethanol for: • Isopropanol • Acetone • Baby bath • Butylene glycol • Baby shampoos • Shower shampoos Viscosity of REWODERM® LI 520-70 at different • Hair shampoos temperatures: Suggested usage concentration Temperature Viscosity (Brookfield, mPas) 20 °C 22.500 2 - 10 % REWODERM® LI 520-70 30 °C 7.500 40 °C 3.500 Packaging 50 °C 1.600 500 kg pallet (5 x 100 kg) 60 °C 1.000 Hazardous Hazardous goods classification REWODERM® LI 520-70 is a low foaming product. Information concerning Foam height according to ROSS MILES (ASTM, 0.1 % calculated on solids content, 40 °C): • classification and labelling according to regulations for transport and for dangerous Foam height initially 35 mm substances Foam height after 5 minutes 30 mm • protective measures for storage and handling • measures in accidents and fires • toxicity and ecological effects is given in our material safety data sheets. Guide Line Formulations
Every Day Shampoo Hair & Body Shampoo - KA 0600
REWOTERIC® AM G 30 35.0 % Sodium Laureth Sulfate, 28 % 40.0 % (Disodium Lauroamphodiacetate; REWODERM® LI 520-70 4.5 % Sodium Lauryl Sulfate; Hexylene (PEG-200 Hydrogenated Glyceryl Glycol) Palmate) REWOPOL® SB CS 50 B 8.0 % REWOCID® UTM 185 4.0 % (Disodium PEG-5 Laurylcitrate Sulfo- (Undecylenamidopropyltrimonium succinate; Sodium Laureth Sulfate) Methosulfate) REWODERM® LI 520-70 5.0 % TEGIN® G 1100 Pellets 2.0 % Water, citric acid, sodium chloride, (Glycol Distearate) preservative up to 100.0 % REWOMID® C 212 0.3 % Preparation: (Cocamide MEA) Add the components with water at REWOTERIC® AM 2 C NM 6.5 % 45 °C while stirring. Adjust the pH with citric acid (Disodium Cocoamphodiacetate) and the viscosity with sodium chloride. REWOTERIC® AM CAS 6.0 % (Cocamidopropyl Hydroxysultaine) Baby Bath Water 41.5 % REWOTERIC® AM G 30 40.0 % Zinc Pyrithione 1.0 % (Disodium Lauroamphodiacetate; Citric Acid Monohydrate approx. 0.2 % Sodium Lauryl Sulfate; Hexylene Preservative q. s. Glycol) Preparation: REWODERM® S 1333 5.0 % (Disodium Ricinoleamido MEA-Sulfo- Mix the ingredients in the given order at succinate) approximately 65 – 70 °C while stirring. Add the Zinkpyrion at approximately 35 °C. Adjust the pH REWODERM® LI 520-70 5.0 % value at room temperature with citric acid to Water, citric acid, preservative up to 100.0 % approximately 6 and the viscosity with sodium Preparation: chloride. Mix the components at 45 °C with constant agitation. Adjust the pH with citric acid. D 11/10
Ultrasonic-Assisted Wet Processing - Basic Design of Instrument - Increasing Swelling in Water - Application in Textile - Fibre2fashion - Com - Fibre2Fashion