Professional Documents
Culture Documents
SERVICE BULLETIN
P&WC S.B. No. 1510R6
MODEL APPLICATION
PT6A-114A, PT6A-25C
Compliance: CATEGORY 5, 8
Summary: The third-stage compressor-stator assembly may show high cycle fatigue at the
vanes which is caused by a high vibratory stress level. The third-stage
compressor-stator assembly is replaced with a stator used on other engine models of
an equivalent performance. The impeller housing and compressor bleed-valve
assembly are also replaced or modified.
24-Hour Global Service USA & CANADA........................ 1-800-268-8000 Other .......................................... 1-450-647-8000
CFIRST CENTRE International .................... (IAC*)+8000-268-8000 Fax ............................................. 1-450-647-2888
Toll free where available (SIL GEN-027) * International Access Code Web Site .................................. www.pwc.ca
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
WARNING - PROPRIETARY RIGHTS & EXPORT CONTROLS NOTICE
This bulletin contains proprietary information of Pratt & Whitney Canada Corp. (″P&WC″), which
P&WC provides in confidence and solely for the purposes of supporting engine certification and
providing applicable information regarding the proper use, maintenance, inspection, repair, servicing
and parts application of P&WC products and services, as directed therein. Neither this bulletin nor
any information in it may be disclosed to others, or used for any other purpose, including, without
limitation, to design, create, develop, reproduce, manufacture or derive any design, part, product,
material, process, modification, configuration change or repair, or obtain FAA or other government
approval to do so. Possession and use of this bulletin is also subject to the restrictions set out in
P&WC’s Technical Data Agreement (a copy of which may be obtained by contacting P&WC Technical
Publications). The contents of this bulletin may be subject to export control laws. Unauthorized export
or re-export of the bulletin, or parts thereof, is prohibited. By accepting and possessing this bulletin,
you agree to be bound by the foregoing terms.
If a Government agency or department intends to disclose any information, written notice should be
given to:
VP - Legal Services, Pratt & Whitney Canada Corp., 1000 Marie-Victorin (01BE5), Longueuil,
Quebec J4G 1A1.
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
Pratt & Whitney Canada Corp.
1000, Marie-Victorin
Longueuil, Québec, Canada J4G 1A1
Tél. 450-677-9411
28 March 2011
SUBJECT: Pratt & Whitney Canada Service Bulletin No. PT6A-72-1510, Rev. No. 6, dated Mar
28/2011 (P&WC S.B. No. 1510R6) THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY
- REPLACEMENT OF; IMPELLER HOUSING, COMPRESSOR BLEED-VALVE
ASSEMBLY - MODIFICATION/REPLACEMENT OF
Replace your existing copy of this service bulletin with the attached revised bulletin. Destroy the
superseded copy.
Please retain this Revision Transmittal Sheet with the revised bulletin.
SUMMARY: This revision is issued to revise the Industry Support Information Section, Para 2.A.:
NOTE: A black bar in the left margin indicates a change in that line of text or figure.
REVISION HISTORY:
Original Issue: Apr 06/1995
Revision No. 1: Jul 06/1995
Revision No. 2: Jul 02/1996
Revision No. 3: May 28/1999
Revision No. 4: Jan 10/2000
Revision No. 5: Jul 18/2006
Revision No. 6: Mar 28/2011
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
1. Planning Information
A. Effectivity
PT6A-114A Engines which are before and include Serial No. PCE-19322 and all engines
converted to Engine Model PT6A-114A (Ref. P&WC engine conversion SB1625).
PT6A-25C (BS832) Engines which are before and include Serial No. PCE-26410
NOTE: Do this service bulletin if the PT6A-114A engines have had a compressor-stator
assembly replacement between June 1993 and November 1994.
B. Concurrent Requirements
None.
C. Reason
(1) Problem
(2) Cause
There can be a high vibratory stress level in the engine power range.
(3) Solution
D. Description
(1) Remove the existing third-stage compressor-stator assembly, impeller housing and
compressor bleed-valve assembly and install a new third-stage compressor-stator
assembly, impeller housing and compressor bleed-valve assembly.
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
E. Compliance
For the balance of PT6A-114A engines prior to and including PCE-19232 and
PT6A-25C, BS832 engines prior to and including PCE-26337, incorporating
compressor stator P/N 3029363.
DELETED.
CATEGORY 8 - This service bulletin is optional and can be done at the discretion of
the operator.
F. Approval
D.O.T./D.A.A. approved.
G. Manpower
Not changed.
J. Software Accomplishment Summary
Not applicable.
K. References
Illustrated Parts Catalog P/N 3032144 (PT6A-25C)
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 2 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
L. Publications Affected
Illustrated Parts Catalog P/N 3032144 (PT6A-25C)
Illustrated Parts Catalog P/N 3043514 (PT6A-114, PT6A-114A, PT6A-135, PT6A-135A)
Overhaul Manual P/N 3032143 (PT6A-25C)
Overhaul Manual P/N 3021243 (PT6A-34, PT6A-34AG, PT6A-34B, PT6A-35, PT6A-36,
PT6A-114, PT6A-114A, PT6A-135, PT6A-135A)
2. Material Information
DELETED
DELETED
DELETED
You can get the procurable parts listed in Para. 2.C. from any Pratt & Whitney Canada
Parts Distribution Center.
The estimated total cost of new parts needed to replace old parts is $20554.26 (US, 1996).
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 3 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
Est. Unit
List Price
($US, Instructions
New P/N Keyword Old P/N Qty 1996) Disposition
For PT6A-114A
3041175 Housing, Impeller 3027799 1 5102.70 (A)(B)
CL06
3121253-01 Compressor Stator, 3029363 1 7950.60 (A)(C)
Assembly of or
3121030-01
3037553 Ê Vane, Compressor Stator 3031653 40 86.74
3037490 Ê Shroud, Compressor 3029282 1 NP
MS9556-06 Bolt - Machine, Double 3 2.23 (A)
Hexagon
3012414 Nut Option 3 6.79 (A)
Interchangeability Control
(IC)
3012411 Ê Nut - Self-locking, 12 1 REF. (H)
Points 0.190-32 x 0.250
3012412 Ê Nut - Self-locking, 12 1 REF. (H)
Points 0.190-32 x 0.254
3012413 Ê Nut - Self-locking, 12 1 REF. (H)
Points 0.190-32 x 0.245
3121248-03 Valve Assembly, 3100829-07 1 3791.00 (A)(B)
Compressor Bleed or
3114735-01
ST3268-069 Ê Metering Plug 3022094 1 213.30 (C)
For PT6A-25C
3041175 Housing, Impeller 3027799 1 5102.70 (A)(B)
CL06
3121253-01 Compressor Stator, 3121030-01 1 7950.60 (A)(C)
Assembly of or
3029363
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 4 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
Est. Unit
List Price
($US, Instructions
New P/N Keyword Old P/N Qty 1996) Disposition
3037553 Ê Vane, Compressor Stator 3031653 40 86.74
3037490 Ê Shroud, Compressor 3029282 1 NP
MS9556-06 Bolt - Machine, Double 3 2.23 (A)
Hexagon
3012414 Nut Option 3 6.79 (A)
Interchangeability Control
(IC)
3012411 Ê Nut - Self-locking, 12 1 REF. (H)
Points 0.190-32 x 0.250
3012412 Ê Nut - Self-locking, 12 1 REF. (H)
Points 0.190-32 x 0.254
3012413 Ê Nut - Self-locking, 12 1 REF. (H)
Points 0.190-32 x 0.245
3121248-04 Valve Assembly, 3100829-07 1 3791.00 (A)(B)
Compressor Bleed
ST3268-067 Ê Metering Plug 3022094 1 213.30 (C)
Consumable Materials and/or Parts Required:
AS3208-02 Preformed Packing AS3208-02 1 0.62 (D)
Hylomar Sealant, Jointing A/R (E)
SQ32M
AMS3087 No.4 Compound, Anti-Sticking A/R (F)
Markleen 4 Solvent, Degreaser A/R (G)
(A) RESTRICTED INTERCHANGEABILITY - (ATA 200 Explanation Code 07):
All the old parts must be replaced by all the new parts as an assembly.
(B) To get the new part it is possible to make a modification to the old part, or you can get the
new part from any Pratt & Whitney Canada Distribution Center.
(C) Discard the part if it is unserviceable. Return a serviceable part to stock.
(D) Standard replacement part.
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 5 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
Est. Unit
List Price
($US, Instructions
New P/N Keyword Old P/N Qty 1996) Disposition
(E) Hylomar SQ32M jointing sealant can be purchased from:
Kingsley & Keith (Canada) Ltd.
310 Victoria Avenue
Westmount Quebec
Canada
or
Aviall
2075 Diplomat
P.O. Box 7086
Dallas Texas 75234
USA
or
Marston Lubricants Ltd.
Naylor Street
Liverpool 36DS
England
(F) AMS3087 anti-sticking compound can be purchased from:
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 6 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
D. Reidentified Parts
Not applicable.
3. Accomplishment Instructions
A. Refer to the instructions in the overhaul manual (Ref. 72-30-00, GAS GENERATOR
ASSEMBLY - DISASSEMBLY), (Ref. 72-30-00, GAS GENERATOR ASSEMBLY -
SUB-ASSEMBLY) and (Ref. 72-30-00, GAS GENERATOR ASSEMBLY - SUB-
ASSEMBLY):
(1) Remove the compressor bleed-valve assembly P/N 3114735-01 or P/N 3100829-07.
(3) Disassemble the compressor rotor assembly and remove the third-stage compressor
stator assembly P/N 3029363 or P/N 3121030-01 and the impeller housing
P/N 3027799.
(4) Install the new third-stage compressor-stator assembly P/N 3121253-01 and the
new or modified impeller housing P/N 3041175.
NOTE: Three additional bolts P/N MS9556-06 and nuts P/N 3012414 are used.
(5) Assemble and install the compressor rotor assembly.
(6) Apply a film of jointing sealant (Hylomar SQ32M) to the mating flanges of the
compressor bleed-valve assembly and the gas generator case and a light
coating of anti-sticking compound (AMS3087, No. 4) to the threads of the bolts and
to the threaded holes in the gas generator case.
NOTE: Make sure that you do not put any compound in the P3 metering hole in
the gas generator flange.
(7) Install the new or modified compressor bleed-valve assembly P/N 3121248-03 or
P/N 3121248-04.
NOTE: Refer to Table 1 for the new compressor bleed-valve assembly fits and
clearances.
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 7 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
B. Write ‘‘P&WC S.B. No. 1510 incorporated’’ in the engine log book.
NOTE: The Time Between Overhaul restrictions in P&WC S.B. No. 1003 for the
third-stage compressor stator assembly do not apply if this service bulletin is
incorporated.
(1) Remove metering plug P/N 3022094 and preformed packing P/N AS3208-02.
Discard preformed packing.
(2) Install new preformed packing P/N AS3208-02 and new metering plug P/N
ST3268-069 or P/N ST3268-067. Torque metering plug 15 to 20 lb.in.
WARNING: USE EYE PROTECTION WHEN YOU WRITE WITH THE VIBRATION
PEENING PROCEDURE.
(3) Put a line across the old part number. Use the vibration peening procedure, 0.003
to 0.006 in. (0.08-0.15 mm) deep, and write the new part number in the same area.
(4) Refer to the instructions in the overhaul manual and do a compressor bleed-valve
assembly leakage test.
D. A modification can be done to the existing serviceable impeller housing P/N 3027799
(Ref. Fig. 2 ):
(1) Machine holes ‘‘B’’ to 0.216 to 0.226 inch diameter (Ref. View on Arrow Z).
(2) Machine six slots as indicated (Ref. Section A-A and View B).
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 8 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
C25001A
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 9 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
-G-
REF.
A
0.216-0.226 B
B 5 HOLES ON THE BASIS
OF 6 HOLES EQ. SPACED
LOCATION AS SHOWN
.010 M F C M G M
60°
0.390-0.420
6 PLACES
0.800-0.820
B BETWEEN SLOTS
B 6 PLACES
B MINIMUM
A MATERIAL REQUIRED
BETWEEN SLOTS
VIEW ON ARROW Z
C24988
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 10 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
-F-
1.664
6 PL
60°
6 PL
-C- Z
REF.
SECTION A-A
C24987
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 11 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
0.1875-0.1925
6 SLOTS EQ. SP.
0.090-0.100
BREAK EDGE
0.003 MAX. ALL AROUND
R 6 PLACES
12 PL.
VIEW B NP
0.140
0.100 FACE
REF. -B-
D
NP
NP D
C24989
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 12 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
Sermatech UK Ltd.
High Holborn Road
Condor Ripley Derbyshire
United Kingdom
Sermatech Inc.
Windsor Connecticut
USA 06095
Sermatech International
Limerick Penn PA19468 1699
USA
Treat with protective coating (5380 DP) 0.0010 to 0.0015 inches thick in all areas
indicated by ‘‘D’’ (Ref. Repeat Section A-A). Apply two or three coats per CPW420-2A.
Surface texture of airfoil 17 micro inches.
(5) If the impeller housing does not need recoating, apply local touch-up only per
SPOP 147.
(6) Identify modified impeller housing by striking out the old P/N 3027799 and adding
the new P/N 3041175 in the same general area using the vibropeen method of
marking.
4. Appendix
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 13 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
PT6A-114A, PT6A-25C
3029363 3121030-01
BASIC SB1505
3121253-01
SB1510
C24986A
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 14 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
3021182
BASIC
SB1167
3027799
SB1351
3041175
SB1510
C24985
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 15 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
PT6A-114A PT6A-25C
3121248-04
SB1510
3121248-03
SB1510
C24984B
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 16 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1510R6
TURBOPROP ENGINE
THIRD-STAGE COMPRESSOR-STATOR ASSEMBLY - REPLACEMENT OF; IMPELLER
HOUSING, COMPRESSOR BLEED-VALVE ASSEMBLY - MODIFICATION/REPLACEMENT OF
4. Appendix (Cont’d)
P&WC Proprietary Information. Subject to the restrictions on the back of the locator.
Apr 06/1995 PT6A-72-1510
Revision No. 6: Mar 28/2011 Page 17 of 17
Export Classification: Outside U.S.:Not Subject to Regs. U.S.-EAR:9E991 EIPA(ECL):Not Subject to Regs., DPA(CGD):N