Professional Documents
Culture Documents
Fork Lifts
Construction Equipment
Solenoid Valves
Poppet Type, Unidirectional, 2-position, 2-way - F2; Poppet Type, Bi-directional, 2-position, 2-way - F50;
Poppet Type, 2-position, 3-way - F58; Spool Type, 2-position, 2-way - F60; Spool Type, 2-position, 3-way - F72; F
Spool Type, 2-position, 4-way - F90; Spool Type, 3-position, 4-way - F122
Proportional Valves H
Pressure Relief - H2; Pressure Reducing/Relieving - H10
Pumps I
Manually Operated - I2
Solenoid Coils
Coils for Size 8, 10, 12 & 16 Cartridges - J2; Quick Reference - J3; Coil Type 40 Dimensions - J7; Coil Type 50 Dimensions - J8; J
Coils for Size 6 Cartridges - J9; Coils Type 32 Dimensions - J10
Manifold Accessories L
Pilot Piston Assembly - L2; Cavity Plugs - L5
Miscellaneous Parts M
Seal Kits - M2; Solenoid Valve Replacement Nuts - M3; Adjustment Kits - M3; Form Tools - M4; Quotation Request - M5
Pressure Controls
• Pressure Relief with up to 6000 psi pressure rating
• Pressure Reducing valves with consistent pressure control stability and precision
Flow Controls
• High accuracy Pressure Compensated flow regulators
Integrated Manifolds
Used in applications where high performance and reliability are important.
HYDAC can satisfy customers’ needs for Complete Cost-Effective System Solutions by incorporating cartridge valves and other
HYDAC hydraulic components, such as Filters, Accumulators, and Accessories into Integrated Manifolds.
Common applications include:
• Construction Equipment
• Farm Machinery
• Utility Service Equipment
• Aerial Work Platforms
• Lift Trucks
• Refuse Management Equipment
• Road Maintenance Equipment
HYDAC’s 50+ years of Cartridge Valves design and manufacturing experience and Global operations in more than 40+ countries provide
excellent support for all your control systems and applications needs.
Approvals
1
Direct Acting, Ball Type DB06A-01 4 15 5000 350 FC06-2 16
2 3
DR08P-01 16 60 5000 350 FC08-3 34
Pilot Operated, Spool Type
1
DR10P-01 26 100 5000 420 FC10-3 36
Needle Valve,
2 1 SDR10A-01 42 160 5000 350 FC10-2 44
Free Reverse Flow
2 4
ST10-01 12 45 5000 350 FC10-4 54
Flow Divider/Combiner,
Re-synchronizing
3
ST16-01 39 150 5000 350 FC16-4 56
3
Integral Relief, Poppet Type RV06C-01 5 19 5000 350 FC06-3 78
C1 C2
Counterbalance Valves
Flow Rate Pressure
Symbol Description Model gpm l/min psi bar Cavity Page #
1
3 Normally Closed,
Vent to Open
2 DW16SA-01 75 284 5000 350 FC16-S3 94
2
3
DW10Z-01 40 151 5000 350 FC10-S3 104
Normally Closed
2
DW16Z-01 80 304 5000 350 FC16-S3 106
2
Normally Closed, Pilot Operated with Screen WS08Z-30
8 30 5000 350 FC08-2 144
Normally Closed, Pilot Operated with Screen,
WS08Z-30M
1 Manual Override, Screw Type
Normally Closed, Pilot Operated,
WS08ZR-01
Free Reverse Flow
10 38 5000 350 FC08-2 146
Normally Closed, Pilot Operated, Free Reverse
WS08ZR-01M
Flow, Manual Override, Screw Type
Normally Closed, Pilot Operated,
WS10ZR-01
Free Reverse Flow
2 20 75 5000 350 FC10-2 148
Normally Closed, Pilot Operated, Free Reverse
WS10ZR-01M
Flow, Manual Override, Screw Type
Normally Closed, Pilot Operated,
WS12ZR-01
1 Free Reverse Flow
29 110 5000 350 FC12-2 150
Normally Closed, Pilot Operated, Free Reverse
WS12ZR-01M
Flow, Manual Override, Screw Type
Normally Closed, Pilot Operated,
WS16ZR-01
Free Reverse Flow
40 150 5000 350 FC16-2 152
Normally Closed, Pilot Operated, Free Reverse
WS16ZR-01M
Flow, Manual Override, Screw Type
2
1
Normally Closed, Direct Acting WS10W-01
10.5 40 5000 350 FC10-2 162
Normally Closed, Direct Acting,
WS10W-01M
Manual Override, Push Type
2
Normally Closed, Direct Acting with Screen WS08W-30
5 19 3600 250 FC08-2 164
Normally Closed, Direct Acting with Screen,
WS08W-30M
1 Manual Override, Push Type
3 1
Direct Acting WK10Z-01
8.4 32 5000 350 FC10-4 228
Direct Acting, Manual Override, Screw Type WK10Z-01M
5 4 2
1
Piloted 3-Way Spool, Hydraulically Operated HPM45SE-01 70 265 5000 350 FCM45-5 256
3
Proportional Valves
Pressure Relief
Flow Rate Pressure
Symbol Description Model gpm l/min psi bar Cavity Page #
1
Pilot Operated, Spool Type PDB10P-01 31 120 5000 350 FC10-2 262
2 Pilot Operated, Spool Type PDB12P-01 53 200 5000 350 FC12-2 264
Pilot Operated, Spool Type PDB16P-01 79 300 5000 350 FC16-2 266
2 3
PDR08P-01 16 60 5000 350 FC08-3 270
Pilot Operated, Spool Type
1 PDR10P-01 21 80 5000 350 FC10-3 272
Pumps
Manually Operated
Displacement Output Max
per Stroke Pressure
Symbol Description Model in cm psi bar Cavity Page #
2
Hand Pump, Free Pivot Handle MP10-01 276
0.5 8.2 3000 207 FC10-2
1
Hand Pump, Flange Mount MP10-02 278
30 lbs
15 lbs
Size 06
Size 08
Size 10
D03
Features
• Adjustable under full pressure
• Stroke limiting device for enhanced safety
• Positive stop to prevent spring from over
adjustment
• Screens to protect pilot orifice from
contamination and ensure reliable operation
• Variety of adjustment mechanism options
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened poppets or spools ensure minimal
wear and extend service life
• One piece body maximizes reliability and
minimizes the effects of eccentricity
• Industry common cavity-compact size
Operation
The DB06A blocks flow from 1 to 2 until the predetermined pressure setting is
2 reached at port 1 to lift the spring opposed ball from its seat, allowing flow from
port 1 to port 2. Pressure at port 2 is directly additive to valve pressure setting.
Flow from port 2 to port 1 is checked.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment
• Adjustment screw cannot be backed out of the valve
• Adjustable under full pressure
• Fast response
• All external surfaces zinc-plated
• Hardened ball to ensure minimal wear and extend service life
Specifications
Operating Pressure 5000 psi (350 bar)
Maximum Flow Rate 4 gpm (15 l/min)
Internal Leakage 5 drops/min maximum to 75%
of nominal setting
Optional Pressure Ranges 0 to 3000 psi (0 to 207 bar)
0 to 5000 psi (0 to 350 bar)
Reseat Pressure (Nominal) 80% of crack pressure
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics
with lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
2 Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
Cartridge Weight 0.15 lb (68 g)
Cartridge Material Steel with hardened work surfaces.
1 Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid Thermoplastic Polyester back-up rings.
Seal Kits Buna-N FS062-N P/N: 02610184
Viton® FS062-V P/N: 02610185
Performance
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
6000
400
5000
Pressure Drop
300
4000
200 3000
2000
100
1000
0 0 gpm
0 1 2 3 4
l/min
0 5 10 15
Flow
0.55
(14)
Adjustment Options
V = Allen Head (Hex 1/8”)
2 Setting
(38.1)
1.5
(50.8)
1 1.0 Thick
(25.4)
0.25 1.5
(6.4) (38.1)
2.0
(50.8)
(39.4) Max
1.55 Max
(27.7)
1.09
0.13
(3.3)
(21.3)
0.84
1
ø0.47
(ø11.9)
9/16-18 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
ø0.69
(ø17.5) Aluminum, 3500 psi 0.34 lbs
FH062-AS4 02600491
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Description
1 A screw-in cartridge, direct acting, poppet type relief valve intended for use as
pressure limiting device in hydraulic circuits requiring low internal leakage and
fast response.
Operation
The DB06C blocks flow from 1 to 2 until the predetermined pressure setting is
reached at port 1 to lift the spring opposed poppet from its seat, allowing flow
from port 1 to port 2. Pressure at port 2 is directly additive to valve pressure
2 setting. Flow from port 2 to port 1 is checked.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment
• Adjustment screw cannot be backed out of the valve
• Adjustable under full pressure
• Fast response
• All external surfaces zinc-plated
• Hardened poppet to ensure minimal wear and extend service life
Specifications
Operating Pressure 5000 psi (350 bar)
Maximum Flow Rate 5 gpm (19 l/min)
Internal Leakage 5 drops/min maximum to
75% of nominal setting
Optional Pressure Ranges 0 to 1800 psi (0 to 124 bar)
0 to 3000 psi (0 to 207 bar)
1500 to 5000 psi (103 to 350 bar)
Reseat Pressure (Nominal) 80% of crack pressure
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics
with lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
2 Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
Cartridge Weight 0.15 lb (68 g)
1 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid Thermoplastic Polyester back-up rings.
Seal Kits Buna-N FS062-N P/N: 02610184
Viton® FS062-V P/N: 02610185
Performance
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
5000
300
Pressure Drop
4000
250
200 3000
150
2000
100
1000
50
0 0 gpm
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
l/min
0 2 4 6 8 10 12 14 16 18
Flow
0.55
(14)
Adjustment Options
V = Allen Head (Hex 1/8”)
(38.1)
2
1.50
Setting
(50.8)
2.00
1 1.00 Thick
(25.4)
0.25 1.50
(6.4) (38.1)
2.00
(50.8)
(39.4) Max
1.55 Max
(27.7)
1.09
0.13
(3.3)
(21.3)
0.84
1
ø0.47
(ø11.9)
9/16-18 UNF-2A
ø0.69
(ø17.5) Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
All measurements in inches (mm).
Subject to technical modifications Aluminum, 3500 psi 0.34 lbs
FH062-AS4 02600491
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.45 kg)
*Please refer to Line Bodies & Cavities section for details
Description
A screw-in cartridge, direct acting, poppet type relief valve intended for use as
1 pressure limiting device in hydraulic circuits which require low internal leakage
and fast response to pressure changes.
Operation
The DB08A blocks flow from port 1 to port 2 until the pressure setting is reached
at port 1 to lift the spring opposed poppet from its seat, allowing flow from port
1 to port 2. Pressure at port 2 is directly additive to valve pressure setting. Flow
2 from port 2 to port 1 is checked.
Features
• Spring ranges up to 6000 psi (420 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• Stroke limiting device for enhanced safety
• Fast response
• All external surfaces zinc-plated
• Hardened poppet to ensure minimal wear and extend service life
• One piece body maximizes reliability and minimizes the effects of eccentricity
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage 5 drops/min. (0.25 cc/min) max.
to 80% of nominal setting
Reseat Pressure (Nominal) 80% of crack pressure
Optional Pressure Ranges 55 to 500 psi (4 to 35 bar)
95 to 900 psi (6.5 to 60 bar)
200 to 1800 psi (14 to 125 bar)
370 to 3300 psi (26 to 230 bar)
560 to 5000 psi (39 to 350 bar)
670 to 6000 psi (47 to 420 bar)
% of Spring Pressure Range 18%
2 Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
1 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Performance Cavity FC08-2 (see Line Bodies & Cavities section)
Measured at 158 SUS (34 cSt) Cavity Tools Rougher: P/N: 02580090
bar psi Toil = 115oF (46oC) Finisher: P/N: 02580091
8000
Cartridge Weight 0.49 Lbs. (0.220 kg)
500
7000
Cartridge Material Steel with hardened work surfaces.
400
6000 Zinc-plated exposed surfaces.
5000
Anodized aluminum knobs. (option H)
Pressure
0 0 gpm
0 2 4 6 8 10 12
l/min
0 10 20 30 40 45
Flow
N = Buna-N
Max.
Max.)
Max.
(76.6(76.6
V = Viton®
3.02 3.02
(76.6
3.02
(76.6
Adjustment Range
3.02
(15.5)
050 = 55 to 500 psi (4 to 35 bar)
0.61 0.61
(15.5)(15.5)
0.61
0.61
(15.5)
090 = 95 to 900 psi (6.5 to 60 bar)
0.61
(15.5)
180 = 200 to 1800 psi (14 to 125 bar)
330 = 370 to 3300 psi (26 to 230 bar)
2
2
0.282 1.496
2
2 600 = 670 to 6000 psi (47 to 420 bar)
21.50
(38)
2
0.28 0.28
(7.1) (7.1)
(7.1)
0.28
1.50
(38)
(50) (50)
(50)
Adjustment Options
(50)
0.28
(7.1)
22
(50)
(79.10)
(77.5)
Max. 3.11
3.1
Max.Max.
Max.Max.
Max.)Max.)
2.24
Max.Max.
(57)
Max.
Max.)
(77.6)Max.
Max.
Max.
(77.6)(77.6)
Max.)
3.06 3.06
Max.
3.06 3.06
(77.6(77.6
3.06
3.06
(77.6
(77.6)
3.06
3.06
(77.6
(28)
1.1
1.1 1.1
(28) (28)
2 2
* Dimensions determined by (12.7)
manufacturing origin. ø0.5 1
1 3/4 -16 UNF -2A
ø0.5 ø12.7)
(1 1
ø0.5
(ø12.7)
ø0.5
(ø12.7) (ø12.7) 3/4-16 UNF-2A
3/4-16 UNF-2A
3/4-16 UNF-2A
3/4-16 UNF-2A
9/ 16" HEX
9/ 16" HEX
9/ 16" HEX 9/ 16" HEX
(85.6)(85.6)
3.37 3.37
3.11 3.11
(79) (79)
(85.6)
3.37
(85.6)
3.11
3.37
(79)
3.11
(79)
Description
A screw-in cartridge, pilot operated (two stage), spool type relief valve intended
1 for use as a pressure limiting device in hydraulic circuits requiring fast response
and low pressure rise over a wide flow range.
Operation
The DB08P blocks flow from port 1 to port 2 until the predetermined pressure
setting is reached at port 1 to lift the spring opposed pilot poppet off its seat,
creating a low flow and a pressure drop across the orifice in the main spool.
2 This allows the main spool to shift, opening port 1 to port 2. Pressure at port 2
is directly additive to valve pressure setting.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability & minimizes the effects of eccentricity
• Low pressure rise over flow range
• Screen protected pilot orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 16 gpm (60 l/min)
Internal Leakage less than 30.5 cu in/min at 5000 psi
(0.5 l/min at 350 bar)
Reseat Pressure (Nominal) 90% of crack pressure
Optional Pressure Ranges 60 to 500 psi (4 to 35 bar)
60 to 900 psi (4 to 60 bar)
60 to 1800 psi (4 to 125 bar)
60 to 3300 psi (4 to 230 bar)
60 to 5000 psi (4 to 350 bar)
2 % of Spring Pressure Range 24%
Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Performance
Cavity FC08-2 (see Line Bodies & Cavities section)
Measured at 158 SUS (34 cSt)
bar psi TOil = 115°F (46°C) Cavity Tools Rougher: 02580090
500
7000
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
400 6000
Cartridge Material Steel with hardened work surfaces.
5000
Zinc-plated exposed surfaces.
Pressure
300
4000 Anodized aluminum knobs. (option H)
200 3000
Buna N or Viton® o-rings and
PTFE back-up rings.
2000
100 Seal Kits Buna-N FS082-N P/N: 03033920
1000 Viton® FS082-V P/N: 03051756
0 0 gpm
0 2 4 6 8 10 12 14 16
l/min
0 10 20 30 40 50 60
Flow
HEX
(63 Max.)
2.48 Max.
7/8”
7/8” HEX HEX Torque
Torque 18.5-2218.5-22
ft-lbs ft-lbs
Seals
2.48 Max.
25-30 Nm)
7/8”Torque
HEX Torque 18.5-22 V = Viton®
7/8” HEX 18.5-22 ft-lbs ft-lbs
(Torque
(Torque 25-3025-30 Nm)
Nm)ft-lbs Adjustment Range
7/8” HEX Torque 18.5-22
(Torque 25-30 Nm) 050 = 60 to 500 psi (4 to 35 bar)
(15.5) (15.5)
0.61 (15.5)
0.61 0.61
0.61
090 = 60 to 900 psi (4 to 60 bar)
1.50
(38)
1.50
(15.5)
2 330 = 60 to 3300 psi (4 to 230 bar)
2
0.28 0.28
(7.1) (7.1)
(15.5)
1.50
0.28
0.28(38)(7.1)
(7.1) (38)
(50)
(50) (38)
2.0
1.50
2 2 Adjustment Options
2
(50)
Adjustment Options
‘V’ - Allen Head (std) ‘H’ ø-1.5
Handø1.5
Knob
(ø38) (ø38)
ø1.5
2.52 Max.
ø1.5
(64 Max.)
2.52 Max.
(64 Max.)
ø1.5
(ø38)
(ø38)
(ø38)
Max.
(64 Max.)
2.52 Max.
(64 Max.)
2.52 Max.
Max.)
2.52 Max.
2.52
(64 Max.)
2.52 Max.
(64 Max.)
(64
0.08
0.08
(2) (2)
0.08 (2)
Max.
(64 Max.)
2.52 Max.
(64 Max.)
Max.
Max.)
0.08
0.08
(2)
(2)
2.52
2.52
(64
1.10 1.10
(28) (28)
1.10
1.10 (28)
2 2
1.10
(28)
(28)
1 1 2 22
1 11 (12.7)
ø 0.5 ø 0.5
(12.7)
3 /4 " - 31/64UNF
" - 16
- UNF
2A - 2A ø 0.5
ø 0.5
ø 0.5
(12.7)
(12.7)
(12.7)
3/4 "3/4 " 6"-UNF
3- /14 -1 6
1 UNF
6U 2 A- -2A2 A
- NF
1/ 21"/HEX
1/ 2" HE X2" HEX
(70.6) (70.6)
2.78 (70.6)
(70.6)2.78
(70.2) (70.2)
(70.2) 2.67
2.78
(70.2)
2.67
2.67
(70.6)
2.78
2.67
(70.2)
2.67
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lb
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.00 lb
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Description
A screw-in cartridge, pilot operated (two stage), spool type relief valve intended
1 for use as a pressure limiting device in hydraulic circuits requiring fast response
and low pressure rise over a wide flow range.
Operation
The DB10P blocks flow from port 1 to port 2 until the pressure setting is reached
at port 1 to lift the pilot poppet creating a pressure drop across the main spool.
This allows the main spool to shift, opening port 1 to port 2. Pressure at port 2 is
2 directly additive to valve pressure setting.
Features
• Spring ranges up to 6000 psi (420 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Screen protected control orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 32 gpm (120 l/min)
Internal Leakage less than 30.5 cu in/min at 5000 psi
(0.5 l/min at 350 bar)
Reseat Pressure (Nominal) 90% of crack pressure
Optional Pressure Ranges 60 to 500 psi (4 to 35 bar)
60 to 900 psi (4 to 60 bar)
60 to 1800 psi (4 to 125 bar)
60 to 3300 psi (4 to 230 bar)
60 to 5000 psi (4 to 350 bar)
60 to 6000 psi (4 to 420 bar)
% of Spring Pressure Range 24%
2 Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
1 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Performance Cavity FC10-2 (see Line Bodies & Cavities section)
Measured at 158 SUS (34 cSt) Cavity Tools Rougher: 02580274
psi bar o o
Toil = 115 F (46 C) Finisher: 02580247
600
8000
Cartridge Weight 0.44 Lbs. (0.200 kg)
7000 500 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
6000
400 Anodized aluminum knobs. (option H)
Pressure
0 0
0 5 10 15 20 25 30 gpm
0 20 40 60 80 100 120 l/min
Flow
Max)
Max)
Max) 9/16” HEX AS8 = SAE-8 ports, aluminum body
2.522.52
2.52
Max)
1” HEX 1” HEX SS8 = SAE-8 ports, steel body
(64.1
(64.1
2.52
Torque Torque
1” HEX1”29.5-37
29.5-37 HEX ft-lbs
ft-lbs
2.52 (64.1
(64.1 Torque
(Torque (Torque
29.5-37 40-50 Nm)
ft-lbsft-lbs
40-5029.5-37
Torque Nm) Seals
(64.1 Max)
(Torque 40-5040-50
(Torque Nm) Nm) N = Buna-N
1” HEX V = Viton®
Torque 29.5-37 ft-lbs
(Torque 40-50 Nm) Adjustment Range
050 = 60 to 500 psi (4 to 35 bar)
090 = 60 to 900 psi (4 to 60 bar)
(18.8)
(18.8)
0.740.74
0.74
180 = 60 to 1800 psi (4 to 125 bar
(18.8)
(18.8)
(18.8) 0.74
(38.1)
2 2
(38.1)
0.280.28
(7.1)(7.1)
0.280.28
0.28 (7.1)(7.1)
0.74
600 = 60 to 6000 psi (4 to 420 bar)
2.132.13
2.132.13
(55)(55)
2.13 (55)(55)
2 2
(38.1)
Adjustment Options
2
(7.1)
Adjustment Options
ø 0.94 ø 0.94
ø (24)
ø (24)Head
‘V’ - Allen ø 0.94(std) ‘H’ - Hand ø1.5
Knob
ø 0.80
0.94 0.80 ø1.5
ø ø 0.94øø (24) (ø38) (ø38)
(øø 20.4)
(24) 20.4)
ø (24)(ø
ø 0.80 ø1.5
ø ø0.80 ø1.5ø1.5 (ø38)
(ø 20.4)
0.80 (ø38)
(ø(ø20.4)
20.4) (ø38)
max.
2.56 max.
(65 max.)
(65 max.)
Max.
Max.Max.
(65 Max.)
(65 Max.)
max.
(65 max.)
Max.
(65 Max.)
max.
2.562.56
max.)
2.56 max.
2.562.56
(65 Max.)
max.)
2.56
2.56Max.
(65 Max.)
(44.5)
1.75(44.5)
1.751.75
1.75 1.75
2.56
(65
(44.5)
2.56
(65
(44.5)
(44.5)
(33)(33)
(33) 1.3(33)
1.3 1.3
1.3 1.3
2 2
(33)
2 2
2 ø 0.63 ø 0.63
1 1 0.63(ø 15.88)
(ø ø15.88)ø 0.63
1 1 7/8-14
(ø 15.88)
ø 0.63(øUNF-2A
15.88)UNF-2A
7/8-14
7/8-14 UNF-2A
1
‘K’ - Protective
(ø
Cap
15.88)
7/8-14 UNF-2A
‘F’ - Tamper Proof Cap
7/8-14 UNF-2A
2.63
2.73
69.4
(66.7)
2.73
69.4
Description
A screw-in cartridge, pilot operated (two stage), spool type relief valve intended
1 for use as pressure limiting device in hydraulic circuits requiring fast response
and low pressure rise in a wide flow range.
Operation
The DB12P blocks flow from port 1 to port 2 until the pressure setting is reached
at port 1 to lift the pilot poppet, creating a pressure drop across the main spool.
This allows the main spool to shift, opening port 1 to port 2. Pressure at port 2 is
2 directly additive to valve pressure setting.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Low pressure drop due to an optimized flow-path
• Screen protected pilot control orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 53 gpm (200 l/min)
Internal Leakage less than 30.5 cu in/min at 5000 psi
(0.5 l/min at 350 bar)
Reseat Pressure (Nominal) 90% of crack pressure
Optional Pressure Ranges 45 to 500 psi (3 to 35 bar)
45 to 900 psi (3 to 60 bar)
45 to 1800 psi (3 to 125 bar)
60 to 3300 psi (4 to 230 bar)
60 to 5000 psi (4 to 350 bar)
2 % of Spring Pressure Range 24%
Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
1 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Performance Cavity FC12-2 (see Line Bodies & Cavities section)
Measured at 158 SUS (34 cSt) Cavity Tools Rougher: 02580667
bar psi TOil = 115°F (46°C) Finisher: 02580668
500
7000 Cartridge Weight 0.59 Lbs. (0.270 kg)
450
400 6000 Cartridge Material Steel with hardened work surfaces.
350 5000
Zinc-plated exposed surfaces.
Anodized aluminum knobs. (option H)
Pressure
300
250
4000 Buna N or Viton® o-rings, and
200 3000 PTFE back-up rings.
150
2000
Seal Kits Buna-N FS122-N P/N: 03071298
100 Viton® FS122-V P/N: 03071299
1000
50
0 0
0 10 20 30 40 50
gpm
l/min
0 20 40 60 80 100 120 140 160 180 200
Flow
13
(53
C = Cartridge only
2.09 Max.
SW 1 131/4” HEX Torque 37-44 ft-lbs
(53 Max.)
(Torque 50-60 Nm) AS12 = SAE-12 ports, aluminum body
2.09 Max.
(53 Max.)
1 1/4” HEX Torque 37-44 ft-lbs SS12 = SAE-12 ports, steel body
(Torque
HEX50-60 Nm)
2.09 Max.
(53 Max.)
(26.55)
(26.55)
1.05
1.05
N = Buna-N
(57.2)
2.25
V = Viton®
(57.2)
2.25
(26.55)
Adjustment Range
1.05
(26.55)
22
(26.55)1.05
050 = 45 to 500 psi (3 to 35 bar)
(57.2)
2.25
(57.2)
1.05
0.34
(8.6)
(76.5)
3.0
3.0
2.0
2.0 T hi ck
180 = 45 to 1800 psi (3 to 125 bar)
(57.2)
22(50.8)
(76.5) 2.25
2
(76.5) 3.0
3.0
2.02.0Thick
T hi ck Adjustment Options
(50.8)
(50.8)
0.34
11 2.0 T hick
(50.8)
(must specify setting below)
0.20
0.20 2.56
2.56 H = Knurled Hand Knob
(5)
(5) (65)
(65) K = Allen Head (HEX 5/32”) w/ cover cap
0.20 3.0
3.0
11 2.56 V = Allen Head (HEX 5/32”)
0.20(5) (76.5) 2.56
(65)
(76.5) Setting (optional)
(5) 13.0 (65)
0.20 (omit) = Set at min. pressure for the range
(76.5)2.56
3.0
(5) XXX = Desired psi ÷ 10
(76.5) (65)
3.0 Example: 300 = 3000 psi
(76.5)
Adjustment Options
‘V’ - Allen Head (std) ‘H’ - Hand
1.5Knob
1.5
(( 38)
38)1.5
Max.
Max.)
2.13Max.
(54Max.)
( 38)
(2) 2.13 Max.
(54 Max.)
1.5
2.13
2.13 Max. (54
( 38)
2.13 Max.
Max.)
1.5
( 38)
0.08
0.08
(54 Max.)
(2)
0.08
Max.)
(2)
2.13 Max.
(54Max.)
2.13 Max. Max.
Max.)
(46) (2) 0.08
(54
(54
(54 Max.)
0.08
1.81
1.81
(46)
1.81
(46)
22 2
(46) 1.81
(46)
1
11 ø 0.88 2
1.81
øø0.88 2
0.88(ø22.23)
(ø22.23)
(ø22.23)
1 1/16"-12UN-2A
111/16"-12UN-2A
1/16"-12UN-2A 1
ø1
0.88
(ø22.23)
ø 0.88
1 1/16"-12UN-2A
(ø22.23)
1 1/16"-12UN-2A
‘K’ - Protective Cap ‘F’ - Tamper Proof Cap
1/2" HEX
1/2" HEX
1/2" HEX
(61.1)
(58.4)
2.41
2.30
1/2" HEX
(61.1)
(58.4)
2.41
(61.1)
1/2" HEX
2.30
(58.4)
2.41
2.30
(61.1)
(58.4)
2.41
2.30
(61.1)
(58.4)
2.41
2.30
Description
A screw-in cartridge, pilot operated (two stage), spool type relief valve intended
1 for use as pressure limiting device in hydraulic circuits requiring fast response
and low pressure rise in a wide flow range.
Operation
The DB16P blocks flow from port 1 to port 2 until the pressure setting is reached
at port 1 to lift the pilot poppet creating a pressure drop across the main spool.
This allows the main spool to shift, opening port 1 to port 2. Pressure at port 2 is
2 directly additive to valve pressure setting.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Low pressure drop due to an optimized flow-path
• Screen protected control orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 79 gpm (300 l/min)
Internal Leakage less than 61 cu in/min at 5000 psi
(1 l/min at 350 bar)
Reseat Pressure (Nominal) 90% of crack pressure
Optional Pressure Ranges 45 to 500 psi(3 to 35 bar)
45 to 900 psi (3 to 60 bar)
45 to 1800 psi (3 to 125 bar)
60 to 3300 psi (4 to 230 bar)
2 60 to 5000 psi (4 to 345 bar)
% of Spring Pressure Range 24%
Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
1 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Installation No orientation restrictions
Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580250
Performance Finisher: 02580251
Measured at 158 SUS (34 cSt) Cartridge Weight 1.0 Lbs. (0.465 kg)
bar psi TOil= 115°F (46°C) Cartridge Material Steel with hardened work surfaces.
400 Zinc-plated exposed surfaces.
350
5000 Anodized aluminum knobs. (option H)
Buna N or Viton® o-rings, and
300 4000
PTFE back-up rings.
Pressure
250
3000 Seal Kits Buna-N FS162-N P/N: 03052427
200
Viton® FS162-V P/N: 03051758
150 2000
100
1000
50
0 0 gpm
0 10 20 30 40 50 60 70 80
l/min
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Flow
Mhax.)
Max.
(67 Mhax.)
2.64 Max.
(25.1)
(25.1)
0.99
(25.1)
(76.5) (57.2)
(25.1)0.99
(57.2)
3.0 2.25
2.25
2.25(57.2)
0.34
(8.6)
0.34
(8.6)
3.0
2 Thick2.0 Thick
3.0
(76.5)
0.34
0.34(8.6)
2.0
3.0
(50.8)
(8.6)
3.0
(50.8)
2.0 H = Knurled Hand Knob
Thick
(50.8) K = Allen Head (HEX 5/32”) w/ cover cap
1 V = Allen Head (HEX 5/32”)
0.20
1 12.56 Setting (optional)
(5) (65) 1 (omit) = Set at min. pressure for the range
3.0 1
0.20 0.20 2.56 2.56
(5) 0.20
(5)0.20 (65) 2.56
(65)
2.56
XXX = Desired psi ÷ 10
(76.5)
(5)(5) 3.0 3.0 (65)
(65) Example: 300 = 3000 psi
(76.5) 3.0
(76.5)
3.0
(76.5)
(76.5)
Adjustment Options
‘V’ - Allen Head (std) ‘H’ - Hand
1.5 Knob
1.5 ( 38)
1.5
(67.5 Max.)
2.66 Max.
( 38) 1.5
( 38)
( 38)1.5
Max.)
(67.5 Max.)
Max.Max.
2.66 Max.
( 38)
Max.
Max.)
2.66 2.66
(67.5
2.66
Max.)
2.66 Max.
(67.5
Max.)
(67.5 Max.)
Max.
2.66 Max.
0.08
Max.)
(2)
(67.5Max.
0.08
(67.5
(2)
(2)
(2) 0.08
Max.)
Max.
(2)
2.66
(67.5(67.5
2.662.66
(47.5)
1.87
(47.5) (47.5)
(47.5)
1.87 1.87
(47.5)
1.87
1.87
2
2 22
2
1 1 11
ø1.13 ø1.13
ø1.13
ø1.13
(ø28.6) (ø28.6)
(ø28.6) (ø28.6)
5/16”-12UN-2A
1
5/16”-12UN-2A
5/16”-12UN-2A
5/16”-12UN-2A ø1.13
(ø28.6)
5/16”-12UN-2A
1/2” HEX
(71.4)
2.81
(73.3)
2.81 (71.4)
2.89
2.81
(71.4)
2.81
(71.4)
2.81
(73.3) (73.3)
2.89
(73.3)
(73.3)
2.89
2.89
(71.4)
2.89
Description
A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve
2 3 with internal spring chamber drain, intended for use as a pressure regulating
device. This valve maintains a constant secondary regulated/ reduced pressure
regardless of pressure variations in the primary system. In addition to the
reducing function, this valve also provides a relief function from the reduced
pressure port to the tank port, if pressure in the secondary circuit exceeds the
set pressure.
1 Operation
The DR08-01 allows bidirectional flow between port 2 and port 1 with the spring
chamber drained through port 3. Once the pressure setting is reached at port 1,
the spool shifts to restrict the flow at port 2, thereby regulating pressure at port
1. If pressure at port 1 exceeds the setting of the valve, the spool will shift further
and relieve excess pressure through port 3. Any pressure at port 3 is directly
additive to valve pressure.
Features
• Spring ranges up to 3000 psi (210 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• Stroke limiting device for enhanced safety
• Fast response
• All external surfaces zinc-plated
• Hardened poppet to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 4 gpm (15 l/min)
Optional Pressure Ranges 50 to 500 psi (3 to 35 bar)
363 to 1200 psi (25 to 83 bar)
653 to 2200 psi (45 to 152 bar)
3 1073 to 3000 psi (74 to 210 bar)
% of Spring Pressure Range 14%
Actuated at 1 Revolution
(Adjustment Type V, H)
2
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
*Consult factory for usage at temp. outside range
Fluid Compatibility Mineral-based or synthetics with
1 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
Performance Cavity Tools Rougher: 02580086
Measured at 158 SUS (34 cSt) Finisher: 02580087
bar psi TOil = 115o F (46o C) Cartridge Weight 0.52 Lbs. (0.235 kg)
200 3000
Cartridge Material Steel with hardened work surfaces.
2500 Zinc-plated exposed surfaces.
150 Anodized aluminum knobs. (option H)
2000
Pressure
0 0 gpm
4 3 2 1 0 1 2 3 4
15 10 5 0 5 10 15 l/min
Relieving Reducing
Flow
3.13
9/16” HEX
(83)
Body & Ports
5/32” HEX
C = No Line Body, cartridge only
1” HEX Torque 18.5-22 ft-lbs AS6 = SAE-6 ports, aluminum body
(83)3.13
9/16” HEXNm)
(83)
(Torque 25-30
3.13
SS6 = SAE-6 ports, steel body
(83)
3.13
(15.2)
0.60
1” HEX1” HEX Torque
(Torque
Torque 18.5-22
25-30
18.5-22 Nm) ft-lbs
ft-lbs N = Buna-N
3.13
(83)
(15.2)
0.60
Adjustment Range
1” HEX Torque 18.5-22 ft-lbs
3
(15.2)
(29.7)
0.60
(15.2) (15.2)
1.17
0.60
(Torque 25-30 Nm) 050 = 50 to 500 psi (3.5 to 35 bar)
120 = 363 to 1200 psi (25 to 83 bar)
2
(53.8)
3
2.12
0.60
(29.7)
1.17
(29.7) 1.17
0.28
(7.1)
2.62
1.17
2
(53.8)
Adjustment Options
(53.8)2.12
2 2 3
1.17
0.28(53.8)
(7.1)0.28
(66.5)2.62
(7.1) 0.28
(7.1)
2.62 2.62
(53.8)
2.62
2.12
1
Adjustment (25.4)
Options ø1.5
1 (ø38)
‘V’ - Allen
(25.4)Head (std) ‘H’ -ø1.5
Hand Knob
(ø38)
1 11
ø1.5 ø1.5
ø1.5
(25.4)(25.4)
(25.4) (ø38) (ø38)
(ø38)
3.17 Max.
Max.)(84 Max.)
3.17 Max.
(84 Max.)
2.362.36 2.36
Max.
(84 Max.)
(60)
3.31 Max.
Max.)
(84 Max.)
(60) 2.36
(60)
(84(84
Max.
(84 Max.)
0.080.08 0.08
3.17
(2)
3.31 Max.
Max.)
(60)
(2) 0.08
(60)(2)
2.36
(843.31
(2) (2)
3
(41) 0.08
3
1.61 1.61 1.61
(41) (41) (41)
3
(41) 1.61
3 2
3
2
1 2
1.61
ø0.56 (ø14.27)
1 ø0.56 (ø14.27)
12 2
ø0.63
ø0.56 (ø15.88)
(ø14.27)
ø0.63 (ø15.88)
ø3/4
ø0.63 -16UNF- 2A
(ø15.88)
1 1 ø3/4(ø14.27)
ø0.56 -16UNF- 2A
ø0.56 (ø14.27)
ø0.95ø3/4 -16UNF- 2A
ø0.95ø0.63 (ø15.88)
(ø24) ø0.63 (ø15.88)
ø0.95
(ø24)
ø3/4 -16UNF- 2A
(ø24)
ø3/4 -16UNF- 2A
‘K’ -ø0.95
Protective
ø0.95 Cap ‘F’ - Tamper Proof Cap
(ø24)
(ø24)
9/16" 9/16"
HEX
9/16" HEXHEX
9/16" HEX
9/16" HEX
(91.6)
(85.1)
(91.6)
(91.6)
(85.1)
(85.1)
3.61
3.61
3.61
3.35
3.35
3.35
(91.6)
(85.1)
3.61
3.35
(91.6)
(85.1)
3.61
3.35
Description
A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve
2 3 with internal spring chamber drain, intended for use as a pressure regulating
device. This valve maintains a secondary regulated/reduced pressure regardless
of pressure variations in the primary system. In addition to the reducing function,
this valve also provides a relief function from the reduced pressure port to the
tank port, if pressure in the secondary circuit exceeds the set pressure.
Operation
1 The DR10-01 allows bidirectional flow between port 2 and port 1 with the
spring chamber drained through port 3. Once the pressure setting is reached at
port 1, the spool shifts to restrict the flow at port 2, thereby regulating pressure
at port 1. If pressure at port 1exceeds the setting of the valve, the spool will shift
further and relieve excess pressure through port 3. Any pressure at port 3 is
directly additive to valve pressure setting.
Features
• Spring ranges up to 1900 psi (131 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• Stroke limiting device for enhanced safety
• Fast response
• All external surfaces zinc-plated
• Hardened poppet to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 16 gpm (60 l/min)
Optional Pressure Ranges 236 to 700 psi (17 to 48 bar)
435 to 1400 psi (30 to 96 bar)
725 to 1900 psi (50 to 131 bar)
% of Spring Pressure Range 14%
3 Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
2
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580092
Performance Finisher: 02580093
Measured at 158 SUS (34 cSt) Cartridge Weight 0.58 Lbs. (0.262 kg)
bar psi TOil = 115°F (46°C)
200 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
175 2500
Anodized aluminum knobs. (option H)
150 Buna N or Viton® o-rings, and
2000
PTFE back-up rings.
Pressure
125
0 0 gpm
-15 -10 -5 0 5 10 15
l/min
-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60
Relieving Reducing
Flow
(92.5)
9/16” HEX
3.25
(18.3)
0.72
9/16” HEX
Dimensions Model Code
5/32” HEX DR10-01-C-N-070 V 050
9/16” HEX Valve Model
1”
1” HEX Torque29.5-37
HEX Torque 29.5-37 ft-lbs
ft-lbs
1.38
Body & Ports
(35)
(Torque 40-50Nm)
(Torque 40-50 Nm)
3
(53.8)
C = Cartridge only
2.12
2 AS6 = SAE-8 ports, aluminum body
(66.5)
2.62
5/32” HEX
(92.5)
3.25
(18.3)
0.72
(18.3)
1” HEX Torque 29.5-37 ft-lbs
0.72
9/16” HEX
(Torque 40-50 Nm) Seals
N = Buna-N
V = Viton®
(92.5)
(92.5)(53.8) 3.25
(18.3)
Adjustment Range
0.72
0.28
(7.1)
1.38
1.38(35)
(18.3)
(66.5)
0.72
0.20 2 Adjustment Options
1.38
(35)
(5) 0.20 1 (50.8) 1.25 Thick ø 1.5 Example: 050 = 500 psi
2
(5) (50.8)
(32) (ø 38)
2.5
0.20 2 (63.8)
2.5
(5) (50.8)
ø1 (63.8)
2.5
(ø 24.5) (63.8)
ø 1.5
Adjustment Options
(93.5)
3.29
(ø 38)
(83.5 Max.)
3.29 Max.
‘V’ - Allen
ø 1Headø 1 (std) ‘H’ - Hand Knob
2.48
(63)
(ø 24.5)
ø(ø
1 24.5)
(ø 24.5) øø 1.5
1.5
0.079
ø 1.5 (ø
(ø38)
38)
(93.5)
3.29
(2)
(ø 38)
(83.5 Max.)(83.5 Max.)
3.29 Max. 3.29 Max.
2.48
(63)
0.079
(93.5)
(93.5)
(47) 3.293.29
3
(2)
(93.5)
Max.)
3.29 Max.
3.29
2.48
(63)
2.48
Max.)
3.29 Max.
0.079 (63)
1.85
2.48
(83.5(83.5
(63)
(2)
0.079
3
(2)
2
0.079
(2)
1.85
(47)
3
1 2 ø0.63
3 (ø15.88)
1.85 1.85
(47)
ø0.69 (ø17.45)
(47)
1 3 (ø15.88)
2
ø0.63
7/8-14 UNF-2A
1 ø0.69 2(ø17.45)
ø0.63 (ø15.88)
1.85
(47)
ø1
(ø24.5) 17/8-14 UNF-2A
ø0.69 (ø17.45)
ø1 27/8-14ø0.63 (ø15.88)
UNF-2A
(ø24.5)ø1 ø0.69 (ø17.45)
(ø24.5)
1 7/8-14
ø0.63 UNF-2A
(ø15.88)
‘K’ - Protective Cap ‘F’ - Tamper Proof Cap
ø1
9/16”(ø17.45)
(ø24.5)ø0.69 HEX
9/16” HEX
9/16” HEX
7/8-14 UNF-2A
ø1
(ø24.5)
9/16” HEX
(91.6)
3.61
(91.6)
3.61
(81.1)
3.193
(81.1)
(91.6)
3.193
3.61
(81.1)
3.193
(91.6)
9/16” HEX
3.61
(81.1)
3.193
FH103-AS8 03038095
anodized (245 bar) (0.27 kg)
Steel, 6000 psi 1.74 lb
FH103-SS8 03037704
Zinc plated (420 bar) (0.79 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Description
A screw-in cartridge, pilot operated, spool type, pressure reducing/relieving
2 3 valve with internal pilot and internal spring chamber drain, intended for use
as a pressure regulating device for secondary circuits. This valve maintains a
secondary regulated/reduced pressure regardless of pressure variations in the
primary system. In addition to the reducing function, this valve also provides a
relief function from the reduced pressure port to the tank port, if pressure in the
secondary circuit exceeds the set pressure.
1 Operation
The DR08P-01 allows bidirectional flow between port 2 and port 1 with the
spring chamber drained through port 3. Once the pressure setting is reached at
port 1, the spool shifts to restrict the flow at port 2, thereby regulating pressure
at port 1. If pressure at port 1 exceeds the setting of the valve, the spool will
shift further and relieve excess pressure through port 3. Any pressure at port 3 is
directly additive to valve pressure setting.
Features
• Spring ranges up to 5000 psi ( 350 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Screen protected control orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 16 gpm (60 l/min)
Optional Pressure Ranges 75 to 500 psi (5 to 35 bar)
3 75 to 900 psi (5 to 60 bar)
75 to 1800 psi (5 to 125 bar)
75 to 3300 psi (5 to 230 bar)
75 to 5000 psi (5 to 350 bar)
2 % of Spring Pressure Range 24%
Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Performance Installation No orientation restrictions
Measured at 158 SUS (34 cSt)
Cavity FC08-3 (see Line Bodies & Cavities section)
bar psi TOil = 115o F (46o C) Cavity Tools Rougher: 02580086
400 Finisher: 02580087
5000 Cartridge Weight 0.38 Lbs. (0.170 kg)
300 4000 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Pressure
5/32” HEX
PRESSURE CONTROL VALVES
Max.
2.52 Max.
(64 Max.)
Max.)
2.52
(64
Dimensions 1/2” HEX
Model Code
5/32” HEX
7/8”HEX Torque18.5-22
HEXTorque 18.5-22ft.-lbs.
ft.-lbs. DR08P-01-C-N-180 V 100
7/8”
(Torque25-30
5/32” HEX
(Torque 25-30Nm)
Nm) Valve Model
2.52 Max.
(64 Max.)
(15.2)
2.12 2.52 Max.
(15.2)
7/8” HEX Torque 18.5-22 ft.-lbs. SS6
Max.)
0.6
= SAE-6 ports, steel body
3
0.6
3(Torque 25-30 Nm)
1.18
2.52 Max.
(30)
1.18
Max.)
(30)
Seals
(64 (64
V = Viton®
(53.8)
(15.2)
(Torque 25-30 Nm) Adjustment Range
(15.2) 0.6
3
(66.5)
2.62
1.18
2.62
0.28
(7.1)
(30)
0.28
(7.1)
1.13
1.13 090 = 75 to 900 psi (5 to 60 bar)
Thick
0.60.6
(30) Thick
3 (30) 180 = 75 to 1800 psi (5 to 125 bar)
(15.2)
2
1.18
(30)(30)
(53.8)
2.12
2 Adjustment Options
0.28
(7.1)
(53.8)
2.12
(30) Thick
0.28
(7.1)
1.13
0.28
(7.1)
2.0
2.0 (30) Thick H = Knurled Hand Knob
1.13
(50.8)
(50.8) (30) Thick K = Allen Head (HEX 5/32”) w/ cover cap
2.5
2.5 V = Allen Head (HEX 5/32”)
(60)1
(60)
1 Setting (optional)
(omit) = Set at min. pressure for the range
2.0 1
2.0 XXX = Desired psi ÷ 10
(50.8)
(50.8)
2.0
2.5
(50.8) Example: 100 = 1000 psi
2.5
(60)
(60)
2.5
(60)
ø1.5
ø1.5
Adjustment Options (ø38)
(ø38)
‘V’ - Allen Head (std) ‘H’ - Hand Knob
Max.
(65 Max.)
2.6 Max.
2.6Max.)
ø1.5
ø1.5
ø1.5
(ø38)
(65
(ø38)
(ø38)
Max.
Max) (61 Max)
2.4 Max.
2.4Max)
(2)Max.
Max.)
0.08
Max.
Max.)
0.08
(2)
2.6 Max.
(65 Max.)
Max.(61
2.62.6
(65(65
Max.
Max)
Max.
0.08
Max)
2.4
(2)(2)
(61
0.08
2.4 2.4
(61 (61
0.08
33
(2)
(40.7)
(40.7)
1.6
1.6
22 33
(40.7)
1.6
(40.7)
1.6
3 22
(40.7)
11
1.6
ø0.56
ø0.56
(ø14.25)
(ø14.25) 1 ø2ø0.63
ø0.56
ø0.56
1 (ø0.63
15.88)
3/4-16
(ø14.25)
UNF-2A
(ø15.88)
ø0.63
3/4-16 UNF-2A(ø14.25)
(øø15.88)
0.63
3/4-16 UNF-2A
ø0.56UNF-2A
3/4-16
1 (ø15.88)
(ø14.25)
‘K’ - Protective øCap
0.63 ‘F’ - Tamper Proof Cap
(ø15.88)
3/4-16 UNF-2A
1/2”HEX
1/2” HEX
1/2” HEX
1/2” HEX
(65.1)
(67.8)
(65.1)
2.56
(67.8)
2.67
(65.1)
2.56
(67.8)
2.67
2.56
2.67
(65.1)
(67.8)
2.56
2.67
1/2” HEX
(65.1)
(67.8)
2.56
2.67
Description
A screw-in cartridge, pilot operated, spool type, pressure reducing/relieving
2 3 valve with internal pilot and internal spring chamber drain, intended for use
as a pressure regulating device for secondary circuits. This valve maintains a
secondary regulated/reducted pressure regardless of pressure variations in the
primary system. In addition to the reducing function, this valve also provides a
relief function from the reduced pressure port to the tank port, if pressure in the
secondary circuit exceeds the set pressure.
1 Operation
The DR10P-01 allows bidirectional flow between port 2 and port 1 with the
spring chamber drained through port 3. Once the pressure setting is reached at
port 1, the spool shifts to restrict the flow at port 2, thereby regulating pressure
at port 1. If pressure at port 1exceeds the setting of the valve, the spool will shift
further and relieve excess pressure through port 3. Any pressure at port 3 is
additive to spring set pressure.
Features
• Spring ranges up to 5000 psi (350 bar)
• Positive stop prevents spring from over adjustment (options V,H)
• Adjustable under full pressure
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Screen protected control orifice to enhance safety
• Fast response with excellent stability
• All external surfaces zinc-plated
• Hardened spool & pilot poppet to ensure minimal wear & extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 26 gpm (100 l/min)
Optional Pressure Ranges 90 to 500 psi (6 to 35 bar)
3 90 to 900 psi (6 to 60 bar)
90 to 1800 psi (6 to 125 bar)
90 to 3300 psi (6 to 230 bar)
90 to 5000 psi (6 to 350 bar)
2 % of Spring Pressure Range 24%
Actuated at 1 Revolution
(Adjustment Type V, H)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Performance
Cavity FC10-3 (see Line Bodies & Cavities section)
Measured at 158 SUS (34 cSt)
bar psi TOil = 115°F (46°C) Cavity Tools Rougher: 02580092
450 Finisher: 02580093
6000
400 Cartridge Weight 0.44 Lbs. (0.203 kg)
350 5000 Cartridge Material Steel with hardened work surfaces.
300 Zinc-plated exposed surfaces.
Pressure
4000
250 Anodized aluminum knobs. (option H)
200 3000 Buna N or Viton® o-rings, and
150
2000
PTFE back-up rings.
100 Seal Kits Buna-N FS103-N P/N: 03071274
1000
50 Viton® FS103-V P/N: 03049443
0 0 gpm
-25 -20 -15 -10 -5 0 5 10 15 20 25
Flow
(18.3)
0.72
(18.3)
0.72
(66.5) 2.32 Max.
(18.3)
0.72
180 = 90 to 1800 psi (6 to 125 bar)
2.62
(66.5)
2.62
(18.3)
(18.3) 0.72
330 = 90 to 3300 psi (6 to 230 bar)
1.38
(35)
1.25
(35)
0.28
(35) (7.1)
1.25Thick
3(32) Thick
0.72
2 3 (32) Adjustment Options
(7.1) 0.28 (66.5)
(12.7)
2.62 2.62
(12.7)
0.5
0.5
3 (must specify setting below)
0.28
(7.1)
2 1.25
1.25 Thick Thick H = Knurled Hand Knob
(7.1)
11 (32)
(32)
K = Allen Head (HEX 5/32”) w/ cover cap
0.20 2.0
0.28
(50.8) (32)
Setting (optional)
2.5
(12.7)
(63.8)
(63.8)
0.20
0.20 2.0 2.0 XXX = Desired psi ÷ 10
(5) (5) 1(50.8)
(50.8)
0.20 2.0 Example: 100 = 1000 psi
(5) 2.5 2.5
(50.8)
(63.8)
2.5 (63.8)
(63.8)
Adjustment Options 1.51.5
( ( 38)
38)
‘V’ - Allen Head (std) ‘H’ - Hand Knob
2.36 Max.
Max.
(61 Max.)
(61 Max.)
1.5
1.5( 38) 1.5
2.36
( 38) ( 38)
Max.
Max.)
Max.)
(61 Max.) 2.4 Max.
(61 Max.)
(61 Max.
Max.
Max.
2Max.)
(0.08) (612Max.)
2.36
(0.08)
(0.08)
(61(61
2.36
2.4
2.36
(61 Max.)
2.4 Max.
2.4 Max.
(61 Max.)
2.4 Max.
(0.08)
2
(0.08) 2
2
33
1.85
(47)
1.85
1.85 (47)
2323
(47)
1.85
1.85 (47)
3
(47)
22
11
2
0.63 11
0.63
(15.88)
(15.88)
0.63
0.63
0.69
(15.88)
0.69
(15.88)1
(17.45)
(17.45)
0.69
0.69 7/8”-14UNF-2A
(17.45) 0.63
(17.45) 7/8”-14UNF-2A
7/8”-14UNF-2A
(15.88)7/8”-14UNF-2A
‘K’ - Protective 0.69Cap ‘F’ - Tamper Proof Cap
(17.45)
7/8”-14UNF-2A
1/2”
1/2” HEX
HEX
1/2” HEX
1/2” HEX
(65.1)
2.56
(65.1)
(67.8)
2.672.67
2.56
1/2” HEX
(65.1)
(67.8)
2.56
2.67
(65.1)
(67.8)
2.67
2.56
(67.8)
(65.1)
2.56
(67.8)
2.67
Overview
HYDAC offers a wide range of Flow Control Cartridge Valves:
Adjustable Flow Controls with and without free reverse flow check feature
positive shut-off, 6000 psi (420 bar) operating pressure, hand knob and
protective cap adjustment options. Models are available for flows up to 42
gpm (160 l/min).
Adjustable, Pressure Compensated Flow Regulators offer flow
maintenance with high accuracy, 5000 psi (350 bar) operating pressure.
Models are available for flows up to 10 gpm (38 l/min)
Adjustable, Priority Type, Pressure Compensated Flow Regulators offer
flow maintenance with high accuracy, 5000 psi (350 bar) operating pressure.
Models are available for flows up to 8 gpm (30 l/min).
Flow Divider/Combiner cartridges maintain flow per specified flow ratio
regardless of system operating pressure conditions. They are rated to 5000
psi (350 bar) operating pressure. Models are available for flows up to 40 gpm
(150 l/min). These valves have a special feature of providing synchronizing
flow to either port 4 or port 2 when the other is blocked.
Features
• Variety of adjustment mechanism options
• Zinc-plated external surfaces
• One-piece body to maximize reliability and
minimize effect of eccentricity
• Hardened parts to ensure minimal wear and
extend service life
• Industry common cavity-compact size
Description
A screw-in cartridge, adjustable variable orifice, hydraulic flow restrictor valve,
non-pressure compensated.
Operation
1 2 The SD08-01 controls flow in either direction from fully open to leaktight
shut-off by turning the adjustment feature clock-wise. Flow is non-pressure
compensated.
Features
• All external surfaces zinc plated
• Adjustment needle cannot be backed out of the valve
• Complete shut-off
• Desired setting may be locked down
• Hardened parts to ensure minimal wear and extend service life
• Aluminum knob option for ease of adjustment
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 16 gpm (60 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7Nm at 210 bar)
2.21lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.25 Lbs. (0.112 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Anodized aluminum knobs. (option H)
1 Buna N or Viton® o-rings, and
PTFE back-up rings.
Seal Kits Buna-N FS082-N P/N: 03033920
Viton® FS082-V P/N: 03051756
Performance
Measured at 158 SUS (34 cSt)
bar psi TOil = 1 15°F (46°C)
400 1.25*
0.25* 0.75*
5000
Pressure Drop
300
4000
(15.5)
0.61
1.65 Max.
V = Viton®
(42 Max.)
5/32” HEX
7/8” HEX Torque 18.5 - 22 ft-lbs
(15.5)
(Torque 25-30 Nm) Adjustment Options
(15.5)0.61
2.0 2.01.65 Max. 1.65 Max.
(42 Max.) (42 Max.)
9/16” HEX
H = Knurled Hand Knob
0.61
K = Allen Head (HEX 5/32”) w/ cover cap
2 V = Allen Head (HEX 5/32”)
2
1.496
(7.1)0.28 (38)
(15.5)
(50)
2.0
0.61
(7.1)
0.28
2
(38)1.496
(38)
(50) (50)
(7.1)
1.496
0.28
2
1.496
(38)
(50)
1
2.0
(7.1)
0.28
1
0.13 0.13
1 1.62 1.13 Thick
1.13
1.62 (28.7) Thick(28.7)
(3.3) (3.3)
0.13 (41.1) (41.1)
1.62
1.13
Thick
(28.7)
(3.3) (41.1)
1 2.0 2.0
(50)
2.0 (50)
(50) 1.13
0.13 1.62 (28.7) Thick
(3.3) (41.1)
Adjustment Options
2.0
(50)
‘V’ - Allen Head (std) ‘H’ - Hand Knob
ø0.87
(ø22.22)ø0.87
ø0.87
(ø22.22)(ø22.22)
ø1.5
ø1.5
(ø38) ø1.5
ø0.87 (ø38)
(ø38)
1.69 Max.
(43 Max.)
(ø22.22)
1.69 Max.1.69 Max.
Max.)
1.02 Max.
ø1.5
(26) Max.)
(ø38)
(43 Max.)(43
1.02
(26)
1.69
Max.
(43
(43 Max.)
1.69 Max.
Max.)
1.02
(26)
1.69 Max.
(43 Max.)
1.69
1.02
(26)
(43
1.69 Max.
(43 Max.)
22
(28)
1.1
(28)
1.1
2
(28)
1.1
11 2
(28)
ø0.5
1.1
ø0.5
(ø12.7)
(ø12.7)
3/4 - 16 UNF - 2A
3/4 - 16 UNF - 2A
‘K’ - Protective Cap
9/ 9
1/61” 6H”EH
XEX
9/ 16” HEX
(54.6) (54.6)
(54.6)
2.15 2.15
2.15
9/ 16” HEX
(54.6)
2.15
Description
A screw-in cartridge, adjustable variable orifice, hydraulic flow restrictor valve,
non-pressure compensated.
Operation
1 2 The SD10-01 controls flow in either direction from fully open to leaktight
shut-off by turning the adjustment feature clock-wise. Flow is non-pressure
compensated.
Features
• Adjustment needle cannot be backed out of the valve
• Desired setting may be locked down
• Aluminum knob option for ease of adjustment
• Complete shut-off
• Hardened parts to ensure minimal wear and extend service life
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 42 gpm (160 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7 Nm at 210 bar)
2.21 lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
2 Finisher: 02580274
Cartridge Weight 0.35 Lbs. (0.160 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Anodized aluminum knobs. (option H)
Buna N or Viton® o-rings, and
1 PTFE back-up rings.
Seal Kits Buna-N FS102-N P/N: 03033872
Viton® FS102-V P/N: 03051757
Performance
Measured at 158 SUS (34 cSt)
bar psi
TOil = 115o F (46o C)
400
0.25 1.50
0.75
5000
3.00
300
4000
Pressure Drop
200 3000
3.50
2000
100
1000
6.00
0 0 gpm
0 5 10 15 20 25 30 35 40
l/min
0 40 80 120 160
Flow
9/16”HEX
HEX
Body & Ports
5/32” 1” HEX Torque 29.5-37 ft-lbs
5/32” HEX C = No Line Body, cartridge only
(Torque 40-50 Nm)
5/32” HEX AS8 = SAE-8 ports, aluminum body
9/16” HEX 1” HEX Torque 29.5-37 ft-lbs SS8 = SAE-8 ports, steel body
9/16” HEX 1” HEX(Torque
Torque 40-50
29.5-37 ft-lbs
Nm)
9/16” HEX (Torqueft-lbs
1” HEX Torque 29.5-37 40-50 Nm) Seals
(Torque 40-50 Nm)
1.92 (48.7)
N = Buna-N
1.92 1.92
V = Viton®
(18.8)
0.74
(48.7)
Adjustment Options
(48.7)
(48.7)
(18.8)
1.92
0.74
(18.8)
0.74
K = Allen Head (HEX 5/32”) w/ cover cap
(18.8)
0.74
V = Allen Head (HEX 5/32”)
(38.1)(38.1)
1.5 1.5
0.280.28
(7.1) (7.1)
2
(38.1)
2.132.13
2.13 (55)
(38.1)
0.281.5
(7.1)
22
(55) 1.5
0.28
(7.1)
(55)
2
2.13
(55)
1 1.25 (32)
1.25 Thick
Adjustment Options
‘V’ - Allen Head (std) ‘H’ - Hand Knob
ø0.8 ø0.8
ø0.8 ø1.5
(ø20.4) ø0.8 ø1.5ø1.5
(ø20.4)
(ø20.4)
(ø20.4) (ø38) ø1.5
(ø38)
(ø38)
(ø38)
(49.7 Max.)
1.96 Max.
Max.)
1.15Max.)
Max.
(29.2)Max.)
1.96Max.
Max.
(49.7 Max.)
1.96 Max.
(49.7
Max.)
1.96
(49.7
Max.)
Max.
1.96
(49.7
(49.7 Max.)
1.96Max.
(49.7Max.
(29.2)
1.15
(29.2)
(29.2)
1.15
1.15
(49.7
1.96
1.96
(33)
1.3
2
(33)
1.31.3
(33)
1.3
22
(33)
1 2
ø0.63
(ø15.88) 11
ø0.63
ø0.63
(ø15.88)
(ø15.88)
1 7/8-14 UNF-2A
ø0.63
(ø15.88) 7/8-14
7/8-14UNF-2A
UNF-2A
7/8-14 UNF-2A
‘K’ - Protective Cap
9/16" HEX
9/16"
9/16"HEX
HEX
(57.8)
2.28
9/16" HEX
(57.8)
(57.8) (57.8)
2.28
2.28 2.28
Operation
2 1 The SDR10A-01 controls flow from port 2 to port 1 from fully open to leaktight
shut-off by turning the adjustment feature clock-wise. Flow is non-pressure
compensated. The flow from port 1 to port 2 is free.
Features
• All external surfaces zinc-plated
• Adjustment needle cannot be backed out of the valve
• Desired setting may be locked down
• Complete shut-off
• Hardened parts to ensure minimal wear and extend service life
• Aluminum knob option for ease of adjustment
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 42 gpm (160 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7 Nm at 210 bar)
2.21 lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Bias Spring Setting 15 psi (1 bar) Minimum
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580274
Finisher: 02580274
Cartridge Weight 0.33 Lbs. (0.150 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
1 Anodized aluminum knobs. (option H)
Buna N or Viton® o-rings, and
PTFE back-up rings.
Seal Kits Buna-N FS102-N P/N: 03033872
Viton® FS102-V P/N: 03051757
Performance
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C)
6000
400
1.00 1.75
0.25 2.50
5000
300
4000
Pressure Drop
200 3000
Flow: 2 to 1 3.00
2000
100
1000
5.75
0 0
0 5 10 15 20 25 30 35 40 gpm
Seals
(95.1)
1.86
(95.1)
(95.1)
1.86
N = Buna-N
1.86
V = Viton®
Bias Spring
15 = 15 psi (1.00 bar)
(18.8)
(18.8)
0.74
0.74
(18.8)
(18.8)
Adjustment Options
0.74
0.74
0.28 (38.1)
(38.1)
(7.1)
2.13
0.28
(7.1)
(55)
0.28
(7.1)
1.25 Thick
Performance
1.251.25
1.25(32)Thick Measured at 158 SUS (34 cSt)
(32) ThickThick
1 (32) (32)
0.20
0.20
0.20
111 1.77
1.77
1.77
bar psi Toil = 115°F (46°C)
0.20
(5)(5) 1.77
(45)
(45) 250
(5)
(5) (45)
(45)
0.87
0.87
0.87
(22)
0.87
(22) 15
(22)
(22) 2.13
2.13 200
2.13
(55)
(55)
2.13
(55)
Pressure Drop
(55) 150
10
Reverse Flow: 1 to 2
Adjustment Options 100
‘V’ - Allen Head (std) ‘H’ - Hand Knob
5
ø ø0.80
0.80
ø(ø0.80
(ø20.4)
20.4) 50
(ø 20.4)
ø 0.80
(ø 20.4) ø1.5
ø1.5
ø1.5
(ø38)
(ø38) 0 0 gpm
(ø38) 0 5 10 15 20 25 30 35 40
Max.)
(48.2 Max.)
Max.
ø1.5
1.90 Max.
l/min
Max.)
1.90 Max.
Flow
Max.)
1.90 Max.
(48.2 (48.2
(29.2)
(29.2)
1.15
1.15
(29.2)(29.2)
Max)
(48.2 Max)
Max.
Max.
Max)
Max.
(48.2
1.90
1.90
(48.2
(48.2 Max)
1.90
1.90 Max.
(33)
1.3
(33)
1.3
(33)
1.3
(33)
1.3
øø0.63
0.63
(ø15.88)
ø 0.63
(ø15.88)
(ø15.88)
7/8-14 UNF-2A
7/8-14 UNF-2A
7/8-14 UNF-2A
ø 0.63
‘K’ - Protective(ø15.88)
Cap
7/8-14 UNF-2A
9/16” HEX
9/16” HEX
9/16” HEX
(57.8)
2.28
(57.8)
2.28
(57.8)
9/16” HEX
2.28
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lb
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lb
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
1 2
The SR06-01 maintains a constant flow from port 1 to port 2 based on the
setting adjustment, regardless of pressure changes downstream of port 2. The
flow rate is determined by a fixed control orifice and could be adjusted within
a limited range. Reverse flow from port 2 to port 1 is at the value of the fixed
control orifice and is non-pressure compensated.
Features
• Excellent stability throughout flow range
• Desired setting may be locked down
• Adjustment screw cannot be backed out of the valve
• All external surfaces zinc-plated
• Hardened parts to ensure minimal wear and extend service life
Specifications
Operating Pressure 5000 psi (350 bar)
Max. Operating Pressure, Port 2 3000 psi (210 bar)
Maximum Flow 4 gpm (15.2 l/min)
Flow Ranges 0.3 = 0.06 - 0.25 gpm (0.23 - 0.95 l/min)
1.0 = 0.25 - 1.0 gpm (0.95 - 3.78 l/min)
4.0 = 1.0 - 4.0 gpm (3.78 - 15.14 l/min)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
Cartridge Weight 0.05 lb (23 g)
2 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS062-N P/N: 02610184
1 Viton® FS062-V P/N: 02610185
Performance
bar psi Measured at 135 SUS (28 cSt)
Toil = 100°F (38°C)
35 500
30 0.3 1.0
400
Reverse Flow 2 1 4.0
Pressure Drop
20 300
200
10
100
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 19
Flow
0.55
(14)
V = Allen Head (Hex 1/8”)
(50.8)
Setting
2.0
(38.1)
xxx = flow rate in gpm
1.5
0.28
(7.1)
Performance
Measured at 135 SUS (28 cSt)
1 1.0 Thick
l/min gpm
5.0
TOil = 100°F (38°C)
2.0 3.0
(50.8) 10
Flow
2.0
ø0.56 5 1 Turn
(ø14.2) 1.0 2 Turns
3 Turns
4 Turns
5 Turns
0 0 psi
0 1000 2000 3000 4000 5000
bar
0 50 100 150 200 250 300 350
Pressure
3 0.8
0.6
Flow
2
0.4 1 Turn
2 Turns
1 3 Turns
0.2 4 Turns
5 Turns
0 0 psi
0 1000 2000 3000 4000 5000
bar
(21.4)
Pressure
1
ø0.47
(ø11.9)
9/16-18 UNF-2A
ø0.69
Standard Line Bodies*
(ø17.5) Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH062-AS4 02600491
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
1 2 The SR08-01 maintains a constant flow from port 1 to port 2 based on the setting
adjustment, regardless of pressure changes downstream of port 2. The flow rate
is determined by a fixed control orifice and could be adjusted within a limited
range. Reverse flow from port 2 to port 1 is at the value of the fixed control orifice
and is non-pressure compensated.
Features
• All external surfaces zinc plated
• Adjustment screw cannot be backed out of the valve
• Excellent stability throughout flow range
• Reverse flow capability
• Desired setting may be locked down
• Hardened parts to ensure minimal wear and extend service life
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Aluminum knob option for ease of adjustment
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Max. Operating Pressure, Port 2 3000 psi (210 bar)
Nominal Flow 7 gpm (27 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7Nm at 210 bar)
2.21lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Flow Ranges 0.25 - 0.40 gpm (0.95 - 1.50 l/min)
0.30 - 0.53 gpm (1.15 - 2.00 l/min)
0.53 - 0.95 gpm (2.00 - 3.60 l/min)
0.87 - 1.66 gpm (3.30 - 6.30 l/min)
1.42 - 2.55 gpm (5.40 - 9.70 l/min)
2.30 - 4.40 gpm (8.80 - 16.7 l/min)
2 3.70 - 7.10 gpm (14.0 - 27.0 l/min)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
1 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Performance Cavity Tools Rougher: 02580090
Finisher: 02580091
Measured at 158 SUS (34 cSt)
l/min gpm Toil = 115°F (46°C) Cartridge Weight 0.25 Lbs. (0.112 kg)
30 8 Cartridge Material Steel with hardened work surfaces.
7
Zinc-plated exposed surfaces.
Anodized aluminum knobs. (option H)
6 Buna N or Viton® o-rings, and
20
5 PTFE back-up rings.
Seal Kits Buna-N FS082-N P/N: 03033920
Flow
4
Viton® FS082-V P/N: 03051756
3
10
2
0 0 psi
0 1000 2000 3000 4000 5000 6000
bar
0 50 100 150 200 250 300 350 400
Pressure
2.06 Max.
(Torque 25-30 Nm)
Dimensions
9/16” HEX
7/8” HEX
Model Code
9/16” HEX
5/32” HEX Torque 18.5-22 ft-lbs SR08-01-C-N-1.0 V 0.8
Max.Max.)
7/8” HEX Nm)
(15.5)
2.06 Max.
(Torque 25-30
0.61
Torque 18.5-22 ft-lbs Valve Model
9/16” HEX (Torque 25-30 Nm) Body & Ports
2.06 Max.2.06(52.3
7/8” HEX C = Cartridge only
(15.5)
0.610.61
Torque 18.5-22 ft-lbs AS6 = SAE-6 ports, aluminum body
2
(52.3 Max.)
(15.5)
(Torque 25-30 Nm) SS6 = SAE-6 ports, steel body
Seals
1.50
(38)
0.28 N = Buna-N
(7.1)
(50)
2.0
(15.5)
V = Viton®
0.61
2 Flow Rate
1.50
(38)
1.50
(38)
0.28
1.13
0.28
(7.1)
1.62
2.0
0.13 (28.7)
(3.3) (41.1) 7.9 = 3.70 - 7.10 gpm (14.0 - 27.0 l/min)
11 Adjustment Options
2.0 1.13
0.13 1.62 1.13 Thick F = Factory pre-set, non-adjustable
0.13 1.62(50) (28.7)Thick
(28.7)
(3.3)
(3.3)
(41.1)
(41.1) (must specify setting below)
H = Knurled Hand Knob
1 2.0
2.0 K = Allen Head (HEX 5/32”) w/ cover cap
(50)
(50) 1.13 V = Allen Head (HEX 5/32”)
0.13 1.62 Thick
(28.7) Setting
(3.3) (41.1)
blank = Set at 50% of maximum flow for the range
2.0 xxx = flow rate in gpm
(50) Example: 0.8 = 0.8 psi
(ø38)
2.1 Max.
20 300
Pressure Drop
(53.3 Max.)
1.27(53.3 Max.)
2.1 Max.
250
(32.2) (32.2)
ø0.80
Max.
1.27 1.27
2.1Max.)
Flow path 2 1
2.1 Max.
(ø20.4) ø1.5 15
(ø38) 200
Max.)
Max.
2.1 Max. (53.3
Max.)
150
Max.
1.1 1.1 (32.2)
10
(53.3
2.12.1
100
(53.3
(53.3 Max.)
5
(28) (28)
2 50
(53.3 Max.)
2.1 Max.
gpm
(32.2)
0 0
(28)1.27
2 0 1 2 3 4 5 6 7 8
1.1
1 2 0 10 20 30 l/min
ø0.5 Flow
(ø12.7)
ø0.5
1 3/4 - 16 UNF-2A
ø0.5
(ø12.7) 1
(28)
3/4 - 16 UNF-2A
1.1
(ø12.7) 2
3/4 - 16 UNF-2A
‘K’ - Protective Cap ‘F’ - Tamper Proof Cap
ø0.5
1
(ø12.7)
3/49-/ 116
6” HUNF-2A
EX
9/ 16” HEX
( 54.3)
) .8)
9/ 16” HEX
.3.)14
4.34
80
2.14 2.14
2.32
( 60(.6
( 54.3) ( 542
( 60.8)
2.34
9/ 16” HEX
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
( 54.3)
( 60.8)
2.14
2.34
Operation
1 2 The SR10-01 maintains a constant flow from port 1 to port 2 based on the setting
adjustment, regardless of pressure changes downstream of port 2. The flow rate
is determined by a fixed control orifice and could be adjusted within a limited
range. Reverse flow from port 2 to port 1 is at the value of the fixed control orifice
and is non-pressure compensated.
Features
• Excellent stability throughout flow range
• Reverse flow capability
• Desired setting may be locked down
• Adjustment screw cannot be backed out of the valve
• All external surfaces zinc-plated
• Aluminum knob option for ease of adjustment
• Hardened parts to ensure minimal wear and extend service life
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Max. Operating Pressure, Port 2 3000 psi (210 bar)
Nominal Flow 10 gpm (38 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7Nm at 210 bar)
2.21lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Flow Ranges and Accuracy 1.0 - 3.5 gpm (4 - 13 l/min) ±10%
3.5 - 10.0 gpm (13 - 38 l/min) ±10%
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.35 Lbs. (0.16 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Anodized aluminum knobs. (option H)
Performance Buna N or Viton® o-rings, and
PTFE back-up rings.
Measured at 34 cSt (158 SUS)
l/min gpm T Oil = 46°C (115°F)
Seal Kits Buna-N FS082-N P/N: 03033872
Viton® FS082-V P/N: 03051757
40 10.6
30 7.9
20 5.3
Flow
10 2.6
0 0 psi
0 1450 2900 4350 5800
0 100 200 300 400 bar
Pressure
(53 Max.)
(53 Max.)
5/32” HEX (Torque 40-50 Nm)
2.09
Dimensions 1” Hex Model Code
(18.8)
(18.8)
9/16” HEX
1.74
1.74
Torque 29.5-37 ft-lbs
5/32” HEX (Torque 40-50 Nm) SR10-01-C-N-3.5 V 1.8
1” Hex Valve Model
2.09 Max.
(53 Max.)
9/16” HEX Torque 29.5-37 ft-lbs
(Torque 40-50 Nm) Body & Ports
C = Cartridge only
(2.1) 2.09 Max.
Max.)
1.74
(38.1)
(38.1)
22
0.28
0.28
(7.1)
(7.1)
(53 Max.)
Seals
1.74
N = Buna-N
(2.1)
2.09
55
55
V = Viton®
(18.8)
Flow Rate
1.5 (38.1)
1.5
Adjustment Options
55 (2.1)
55
2
0.28
(7.1)
11
(38.1)
Thick
(2.1)
(32)
H = Knurled Hand Knob
0.2
0.2 1.77
1.77
(2.1)
55
1 2.13
2.13 1.25 Thick
Setting
blank = Set at 50% of maximum flow for the range
1 (55)
(55) (32)
1.25
1.77 Thick xxx = flow rate in gpm
0.2 1 (32)
1.25
(45) Thick
(5.0)
0.2 1.77 (32) Example: 1.8 = 1.8 psi
(5.0) 0.2 (45) 1.77
(5.0) (45)
2.13
2.13
(55) Performance
ø0.8
ø0.8 (55) 2.13 Measured at 34 cSt (158 SUS)
(55)
(ø20.4)
(ø20.4) ø1.5
ø1.5
bar psi T Oil = 46°C (115°F)
Adjustment Options (ø38)
(ø38) 40 580
‘V’ - Allen Head (std) ‘H’ - Hand Knob Pressure Drop
2.13 Max.
2.13 Max. 2.13 Max.
ø0.8
(54 Max.)
Max. (54 Max.)
2.13 Max.
Max. 2.13 Max.
1.32
1.32
(54 Max.)
Max. (54 Max.)
(33.5)2.13 Max.
(54 Max.)
Max.)
2.13Max.)
10 145
(54
(54
(33.5)
1.32
(54 Max.)
(33) 1.32
Max.)
(33.5)
gpm
2.13Max.
0
1.32
0
Max.)
0 2 4 6 8 10
2.13
(33)
1.3
1.3
40 l/min
(54
22
2.13
0 10 20 30
(54
Flow
(33)
1.3
2
(33)
(33)1.3
11 2
1.3
ø15.88
ø15.88
(ø0.63)
(ø0.63) 2
ø15.88
17/8-14UNF-2A
7/8-14 UNF-2A
ø15.88
1
(ø0.63)
7/8-14 UNF-2A
(ø0.63)
ø15.88
1 7/8-14 UNF-2A
(ø0.63)
7/8-14 UNF-2A
‘K’ - Protective Cap ‘F’ - Tamper Proof Cap
9/91/61”6H
” 9E
H/XE
16X” HEX
9/ 16” HEX
(57.8)
2.28
(57.8)
2.28 (57.8)
(55.1)
2.17
2.28
2.28
(55.1)
(55.1)(55.1)
2.17
2.17 2.17
9/ 16” HEX
(57.8)
(57.8)
2.28
(55.1)
2.17
1 3 Operation
The SRP08-01 maintains a constant priority flow from port 1 to port 3 based on
the setting adjustment, regardless of pressure changes downstream of port 3 or
in the bypass line at port 2. The flow rate is determined by a fixed control orifice
2 and could be adjusted within a limited range. Flow in excess of the priority setting
is directed to port 2. If the priority flow at port 3 is blocked, the spool will shift,
thereby closing off flow to port 2.
Features
• Excellent stability throughout flow range
• Reverse flow capability
• Desired setting may be locked down
• Adjustment screw cannot be backed out of the valve
• Bypass port 2 may be fully pressurized
• All external surfaces zinc-plated
• Aluminum knob option for ease of adjustment
• Hardened parts to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min)
Flow Ranges 0.34 - 0.47 gpm (1.30 - 1.80 l/min)
0.42 - 0.66 gpm (1.60 - 2.50 l/min)
0.53 - 1.00 gpm (2.00 - 3.70 l/min)
0.92 - 1.70 gpm (3.50 - 6.50 l/min)
1.60 - 3.30 gpm (6.00 - 12.5 l/min)
2.30 - 5.50 gpm (8.80 - 20.8 l/min)
Adjustment Torque Required 1.25 lbf.ft at 3000 psi (1.7Nm at 210 bar)
2.21lbf.ft at 5000 psi (3.0 Nm at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580086
Performance Finisher: 02580087
Measured at 158 SUS (34 cSt) Cartridge Weight 0.35 Lbs. (0.15 kg)
l/min gpm T Oil = 115°F (46°C) Cartridge Material Steel with hardened work surfaces.
30 8
Zinc-plated exposed surfaces.
7 Anodized aluminum knobs. (option H)
6
Buna N or Viton® o-rings, and
20
PTFE back-up rings.
5
Seal Kits Buna-N FS083-N P/N: 03054795
Flow
1
0 psi
0 -6000 -4000 -2000 0 2000 4000 6000
(15.2)
(Torque 25-30 Nm) Body & Ports
0.60
(15.2)
2.06
5/32” HEX
0.60
7/8” HEX
Torque 18.5-22 ft-lbs C = No Line Body, cartridge only
9/16” HEX (Torque 25-30 Nm) AS6 = SAE-6 ports, aluminum body
SS6 = SAE-6 ports, steel body
(52.3 Max.)
33
2.06 Max.
(29.7)
1.17
(29.7)
1.17
Seals
(53.8)Max.)
Max.
N = Buna-N
(15.2)
22
(15.2) 0.60
(53.8)
2.12
Max.)
Max.
V = Viton®
2.12
(15.2)
(52.32.06
(52.3
(66.5)
0.60
2.62
(66.5)
2.62
Flow Rate
2.06
1.17 0.28
(7.1)
0.60
(53.8)1.17(29.7)0.28
1.17 (7.1)
3
0.28(7.1) (29.7)
1.13
Thick
2.62
2.12
Thick
(53.8)
(28.7)
0.28
(66.5)
2.02.0
2.62
(50.8)
(7.1)
(50.8)
Adjustment Options
2.52.5
(60)(60)
F = Factory pre-set, non-adjustable
(must specify setting below)
11
1.13
Thick H = Knurled Hand Knob
1.13 Thick
(28.7)1.13
2.0 1 (28.7) Thick
(28.7)
K = Allen Head (HEX 5/32”) w/ cover cap
2.0 V = Allen Head (HEX 5/32”)
(50.8) 2.0
(50.8)
(50.8) Setting
2.5
2.5
(60) blank = Set at 50% of maximum flow for the range
(60) 2.5 ø1.5
ø0.80 ø1.5 xxx = flow rate in gpm
ø0.80 (60) (ø38)
(ø20.4)
(ø20.4) (ø38) Example: 0.8 = 0.8 psi
Adjustment Options
Max.)
(53.3 Max.)
2.1 Max.
ø0.80 ø1.5
(53.3
Max)
(ø38)ø1.5
2.1 Max.
(53.3 Max)
(ø20.4)
ø0.80
Max.
(32.2)
2.1 Max. 1.27
(32.2)
(ø38) ø1.5
(53.3 Max.) 1.27
(ø20.4)
ø0.80
(53.3
(ø20.4) (ø38)
2.1
(53.3 Max.)
2.1 Max.
(53.3 Max)
(53.3 Max.)
2.1 Max.
(32.2)
Max.
(32.2) 1.27
33
(53.3 Max)
2.1 Max.
(41.3)
1.63
1.27
2.1
(41.3)
(53.3 Max)
1.63
2.1 Max.
(32.2)
1.27
22
3
(41.3)
1.63
ø0.56 11
ø0.56
(ø14.26)
(ø14.26) 32
(41.3)
3
1.63
ø0.63
(41.3)
ø0.63
1.63
(ø15.88)
(ø15.88) ø0.56 1 2- 16- 16UNF-2A
3/43/4 UNF-2A
(ø14.26)
2
ø0.63
ø0.56
(ø15.88)1 3/4 - 16 UNF-2A
(ø14.26)
ø0.56 1
‘K’ - Protective Cap
(ø14.26) ‘F’ - Tamper Proof Cap
ø0.63
(ø15.88)ø0.63
3/4 - 16 UNF-2A
(ø15.88) 93/4
/ 196/-”116
H
6”EH
XUNF-2A
EX
9/ 16” HEX
(60.8)
(54.3)
2.39
2.14 2.14
2.39(60.8)
(54.3)
2.39
(54.3) 2.14
(60.8)
9/ 16” HEX
9/ 16” HEX
Standard Line Bodies*
Pressure
Code Part No Material Weight
(60.8)
(54.3)
2.39
Rating
2.14
(60.8)
(54.3)
2.39
2.14
Operation
In the dividing mode, ST10-01 divides the input flow on port 3 between ports 2
and 4, based on the specified ratio, regardless of the operating pressure. In the
combining mode, the flow from ports 2 and 4 will be combined into port 3. The
division or combining will be maintained even if unequal loads are placed on
3 ports 2 and 4.
The ST10-01 provides synchronizing flow in both combining and dividing modes
at bottomed conditions in cylinder applications and at stalled conditions in motor
applications. This feature is useful in hydraulic circuits that require cylinders to
move at the same time. If one cylinder bottoms out first, the opposite cylinder is
provided with a synchronizing flow to allow that cylinder to bottom before both
cylinders start moving in the opposite direction.
Features
• All external surfaces zinc-plated
• Hardened parts to ensure minimal wear and extend service life
• One piece body maximizes reliability and minimizes the effects of eccentricity
• High accuracy operation
• Wide flow range down to 25% of nominal flow rating
4 •
•
Low pressure drop
Provides re-synchronizing flow after completion of the actuator cycle
• Industry common cavity
Specifications
3 Operating Pressure 5000 psi (350 bar)
Max. Input Flow 12 gpm (45 l/min)
Inlet Flow Options 2 gpm (7.6 l/min)
4 gpm (15.2 l/min)
6 gpm (22.8 l/min)
8 gpm (30.4 l/min)
2 10 gpm (37.8 l/min)
12 gpm (45.6 l/min)
Minimum Input Flow Not less than 25% of Nominal Input flow
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-Based or Synthetics with
1 Viscosity
lubricating properties
50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580249
Flow Division Accuracy Finisher: 02582048
Measured at 158 SUS (34 cSt)
Toil = 115°F (46°C) Cartridge Weight 0.27 lb (.122 kg)
11, 22, 33
Cartridge Material Steel with hardened work surfaces.
44 Zinc-plated exposed surfaces.
10 55 Buna N or Viton® o-rings, and
66
PTFE back-up rings.
5 Seal Kits Buna-N FS104-N P/N: 03051912
Accuracy %
-5
-10
0 20 40 60 80 100
% of Maximum Nominal Flow
(18.8)
1.16
0.74
(29.5) Body & Ports
1” HEX Torque 29.5-37 ft-lbs
(35.05) C = No Line Body, cartridge only
1.38
(Torque 40-50 Nm)
AS8 = SAE-8 ports, aluminum body
4 SS8 = SAE-8 ports, steel body
Seals
(18.8)
N = Buna-N
0.74
(95.1)
(51.3)
V = Viton®
3.74
2.02
(35.05)
1.38
4
*Synchronization flow rate
Ratio Ratio Max. inlet
Combining Dividing
(95.1)
(51.3)
Code Port Port flow gpm
3.74
2.02
2
(82.6)
2-4 2-4
11 50 50 2 (7.6) 0.18 (0.7) 0.18 (0.7)
0.28
(7.1)
66 50 50 12 (45.6) 1.37 (5.2) 0.82 (3.1)
0.28
0.26 2.0 (7.1)
*at 100 bar (1450 psi)
(6.5) 0.26 (50.8)
2.0
1.26
(6.5) (50.8)
2.51 1.26 Thick Thick
2.51 (32)
(32)
(63.8)
(63.8) Performance
Measured at 158 SUS (34 cSt)
psi bar Toil = 115°F (46°C)
11 22 33 44 55 66
250
16
200
Pressure Drop
0.51 0.51
(13)
12
150
(13)
8
100
0.08
(2)
50 4
4
0.08
(2)
0 0 gpm
0 2 4 6 8 10 12 14 16
0 20 40 60 l/min
(63.5)
43
2.5
Flow Rate
(63.5)
32
2.5
1
2
ø 0.625
(ø 15.88)
ø 0.688
(ø 17.48)
ø 0.75
17/8-14 UNF-2A
(ø 19.05)
ø 0.625
(ø 15.88)
ø 0.688
(ø 17.48)
ø 0.75 Standard Line Bodies*
(ø 19.05)
Pressure
Code Part No Material Weight
Rating
7/8-14 UNF-2A
Aluminum, 3500 psi 0.34 lbs
FH1041-AS8** 02593311
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.00 lbs
FH1041-SS8** 02593312
Zinc plated (420 bar) (0.45 kg)
*Please refer to Line Bodies & Cavities section for details
**Standard line body (FH104) port 1 must be plugged when used with ST10.
All measurements in inches (mm).
Subject to technical modifications Use SAE-8 plug, HYDAC part #02580005
Operation
In the dividing mode, ST16-01 divides the input flow on port 3 between ports 2
and 4, based on the specified ratio, regardless of the operating pressure.
In the combining mode, the flow from ports 2 and 4 will be combined into port 3.
The division or combining will be maintained even if unequal loads are placed on
3 ports 2 and 4.
The ST16-01 provides synchronizing flow in both combining and dividing modes
at bottomed conditions in cylinder applications and at stalled conditions in motor
applications. This feature is useful in hydraulic circuits that require cylinders to
move at the same time. If one cylinder bottoms out first, the opposite cylinder is
provided with the synchronizing flow to allow that cylinder to bottom before both
cylinders start moving in the opposite direction.
Features
• High accuracy operation
• Low pressure drop
• Wide flow range down to 25% of nominal flow rating
• Provides re-synchronizing flow after completion of the actuator cycle
4 •
•
All external surfaces zinc-plated
Hardened parts to ensure minimal wear and extend service life
• One-piece body maximizes reliability and minimizes the effect of eccentricity
• Industry common cavity
Specifications
3 Operating Pressure 5000 psi (350 bar)
Maximum Input Flow 40 gpm (150 l/min)
Inlet Flow Options 24 gpm (90 l/min)
30 gpm (115 l/min)
40 gpm (150 l/min)
Minimum Input Flow Not less than 25% of Nominal Input flow
2 Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC16-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580253
Finisher: 02580252
Cartridge Weight 1.02 lb (.465 kg)
Flow Division Accuracy Cartridge Material Steel with hardened work surfaces.
Measured at 158 SUS (34 cSt)
Zinc-plated exposed surfaces.
TOil = 115°F (46°C)
Buna N or Viton® o-rings, and
10
1212 PTFE back-up rings.
1515
2020
Seal Kits Buna-N FS164-N P/N: 03181644
Viton® FS164-V P/N: 03181675
5
Accuracy %
-5
-10
0 20 40 60 80 100
% of Maximum Nominal Flow
(25.9)
Valve Model
1.02
(50) 1 1/2” HEX
Torque 90-110 ft-lbs Body & Ports
(55.4) C = No Line Body, cartridge only
0.79
2.18
(20)
(Torque 120-150 Nm)
AS16 = SAE-8 ports, aluminum body
4 SS16 = SAE-8 ports, steel body
(82.25)
3.24
Seals
(25.9)
1.02
N = Buna-N
(132)
V = Viton®
5.20
(55.4)
2.18
(82.25)
5.20 4.49
Ratio Ratio
3.24
Max. inlet flow *Synchronization
Code Port Port
gpm (l/min) flow rate gpm (l/min)
3 (%) 4 (%)
3 2 1212 50 50 24 (90) 1.8 (6.7)
1515 50 50 30 (115) 2.2 (8.3)
(114)
4.49
Performance
0.28
(7.1)
Measured at 158 SUS (34 cSt)
0.23 3.54 bar psi Toil = 115o F (46o C)
0.28
(5.0)
(7.1)
(90) 2.0 1212 1515
Thick 250
4.0 (50) 16
0.23 3.54
(5.0) (100)
(90) 2.0 200
Thick
Pressure Drop
4.0 (50) 12
(100) 150
2020
8
100
0.83 0.83
4
(21) (21)
50
0 0 gpm
0 10 20 30 40
0.080.08
l/min
(2) (2)
33
(104.2)
(104.2)
4.1
4.1
22
1
1
ø1
ø125.43)
(ø
(ø 25.43)
(ø1.063)
(ø 27)
(ø1.063)
(ø ø27)
1.126
(ø 28.6)
Standard Line Bodies*
ø1.126 1 5/16-12 UN-2A Pressure
(ø 28.6) Code Part No Material Weight
Rating
1 5/16-12 UN-2A
Aluminum, 3500 psi 3.00 lb
FH1641-AS16** 02593313
anodized (245 bar) (1.36 kg)
Steel, 6000 psi 8.8 lb
FH1641-SS16** 02593314
Zinc plated (420 bar) (4.00 kg)
*Please refer to Line Bodies & Cavities section for details
**Standard line body (FH164) port 1 must be plugged when used with ST16.
All measurements in inches (mm).
Subject to technical modifications Use SAE-16 plug, HYDAC part #02581224.
Overview
The HYDAC range of direct and pilot operated check valves provide a broad
selection of cartridge and inline products with operating pressure rating of up to
6000 psi (420 bar). All valves have a one piece body design and hardened balls or
poppets. This provides an excellent product with reliable seating, 2 drops/minute
maximum internal leakage, dirt-tolerance and long life.
Check Valves offer optional bias springs and flow capacity up to 44 gpm (165 l/
min). Check valve cartridges fit into Industry standard cavities. A wide selection of
cracking pressures are available from 5 to 70 psi (0.35 – 5 bar). Thus they could be
used not only as a conventional check but also as a low pressure relief valves.
Pilot Operated Check Valves are available for flows up to 40 gpm (150 l/min) and
pilot ratios 3:1 and 4:1. These valves positively lock a load from port 1 to port 2
until pilot pressure applied to port 3 is sufficient to unseat the valve. This flow path
provides for higher flow rating in a given cavity, excellent stability and repeatability.
They also fit into the same cavity as HYDAC counterbalance valves. These valves
provide a low cost alternative to load control when the dynamics of neither
overrunning loads nor load release speed are factors to be considered in the design
of the hydraulic circuit. They are used for:
• Position load locking.
• As an alternative to counterbalance valves where neither the overrunning loads
or release speed are factors in the application.
Single Pilot-to-Open Check Valves and Dual Pilot-to Open Check Valves are
inline housed, pilot operated, hydraulic check valves for use as a blocking or load
holding device for flow rates up to 20 gpm (80 l/min) and 6000 psi (420 bar). They
feature:
• Hardened closing element in a check valve to ensure extended service life and
2 drops/min maximum internal leakage
• Multiple bias spring options for back pressure application flexibility
• Optional sealed pilot piston
• Check section serviceable as a cartridge
• All zinc-plated external cartridge surfaces
• Aluminum or steel inline housings
Counterbalance Valve RS08-01 is a compact cartridge design with operating
pressure up to 5000 psi (350 bar) and
flow rate up to 10 gpm (38 l/min). These valves are used for
• Precise control of overrunning loads
• Positive load holding in any position
• Protection from pump cavitation
• Thermal expansion relief protection
• Preventing actuators from running ahead of the pump supply
Counterbalance Valves have:
• A built in check valve feature allowing free flow in one direction
• A relief feature controlling flow in the other direction
• A pilot signal that overrides the relief setting providing the counterbalance
function
Operation
1 2 The RP08A allows flow from port 2 to port 1, while normally blocking flow from
port 1 to port 2. The valve remains closed by bias spring until sufficient pressure
is applied at pilot port 3. The cartridge has 3:1 and 4:1 optional pilot ratios,
meaning that at least one-third or one-fourth (respectively) of the load pressure
held at port 1 is required at port 3 to open the valve. A sealed pilot piston option
is available.
3
Features
• Hardened poppet to ensure extended service life and low leakage
• Additional reseating spring for fast and reliable closing
• Optional sealed pilot piston
• Higher flow rating and low pressure drop due to pilot port at 3.
• Same cavity as counterbalance valve RS08.
• All external surfaces zinc-plated or specifically treated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage 2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Pilot Ratio 3:1, 4:1
Standard Check Bias Spring 15 psi (1.0 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
3 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580086
2 Finisher: 02580087
Cartridge Weight 0.19 Lbs. (0.09 kg)
Cartridge Material Steel with hardened work surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Seal Kits Buna-N FS083-N P/N: 03054795
1 Viton® FS083-V P/N: 02591059
C = Cartridge only
AS6 = SAE-6 Ports, aluminum Body
SS6 = SAE-6 Ports, steel Body
Seals
N = Buna-N
3 NS = Buna-N with Sealed Piston
(29.7)
V = Viton®
1.17
(15.2)
Cracking Pressure
2.62
0.60
15 = 15 psi (1.00 bar)
Pilot Ratio
(53.8)
0.28
(7.1)
2.12
3 = 3:1
4 = 4:1
Performance
1.13 Thick 3:1 Pilot Ratio
1 (30) Measured at 158 SUS (34 cSt)
bar psi
0.18 2.0 TOil = 115°F (46°C)
(4.6) (50.8) 400
25
1 2
Pressure Drop
2.5 20 300 2 1
(60)
15
200
10
100
5
0 0 gpm
0 2 4 6 8 10 12
0 5 10 15 20 25 30 35 40 45 l/min
Flow
Pressure Drop
(2.0)
20 300 2 1
15
200
10
100
5
0 0 gpm
0 2 4 6 8 10 12
(41.2)
1.62
0 5 10 15 20 25 30 35 40 45 l/min
Flow
ø0.56 (ø14.26)
Operation
1 2 The RP10A allows flow from port 2 to port 1, while normally blocking flow from
port 1 to port 2. The valve remains closed by bias spring until sufficient pressure
is applied at pilot port 3. The cartridge has 3:1 and 4:1 optional pilot ratios,
meaning that at least one-third or one-fourth (respectively) of the load pressure
held at port 1 is required at port 3 to open the valve. A sealed pilot piston option
is available.
3
Features
• Hardened poppet to ensure extended service life and low leakage
• Additional reseating spring for fast and reliable closing
• Optional sealed pilot piston
• Higher flow rating and low pressure drop due to pilot port at 3.
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 16 gpm (60 l/min)
Internal Leakage 2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Pilot Ratio 3:1, 4:1
Standard Check Bias Spring 15 psi (1.0 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
3 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-3 (see Line Bodies & Cavities section)
(18.3)
0.72
AS8 = SAE-8 Ports, aluminum Body
(18.4)
0.69
2
2.62
Performance
0.28
(7.1)
Pressure Drop
20 300 2 1
2.5
(63.8) 15
200
10
100
5
0 0
0 5 10 15 20 gpm
(18.5)
0.73
0 10 20 30 40 50 60 70 l/min
Flow
0.08
(2.0)
20 300 2 1
15
1.81
(46)
200
10
100
5
0 0 gpm
0 5 10 15 20
ø0.63 (ø15.88) l/min
0 10 20 30 40 50 60 70
Flow
ø0.69 (ø17.48)
7/8 - 14 UNF-2A
ø1.0
(ø25.4)
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.60 lb
FH103-AS8 03038095
anodized (245 bar) (0.27 kg)
Steel, 6000 psi 1.74 lb
FH103-SS8 03037704
Zinc plated (420 bar) (0.79 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
1 2 The RP16A allows flow from port 2 to port 1, while normally blocking flow from
port 1 to port 2. The valve remains closed by bias spring until sufficient pressure
is applied at pilot port 3. The cartridge has 3:1 and 4:1 optional pilot ratios,
meaning that at least one-third or one-fourth (respectively) of the load pressure
held at port 1 is required at port 3 to open the valve.
Features
• Hardened poppet to ensure extended service life and low leakage
• Additional reseating spring for fast and reliable closing
• Optional sealed pilot piston
• Higher flow rating and low pressure drop due to pilot port at 3.
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 40 gpm (150 l/min)
Internal Leakage 2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Pilot Ratio 3:1, 4:1
Standard Check Bias Spring 15 psi (1.0 bar)
3 Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC16-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580094
2 Finisher: 02580095
Cartridge Weight 1.13 Lbs. (0.51 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Seal Kits Buna-N FS163-N P/N: 03071303
1 Viton® FS082-V P/N: 03071304
(25.9)
1.02
NS = Buna-N with Sealed Piston
3
(55.4)
V = Viton®
2.18
3 = 3:1
4 = 4:1
Performance
3:1 Pilot Ratio
1
0.34
Pressure Drop
(101.9) 20 300 2 1
15
200
10
100
5
0 gpm
0.98
0
(25)
0.08
0 10 20 30 40
(2)
l/min
0 25 50 75 100 125 150
Flow
400
(75)
25
Pressure Drop
1 2
20 300 2 1
15
200
10
100
5
ø1.06 (ø27)
0 0 gpm
0 10 20 30 40
ø1.13 (ø28.6) l/min
0 25 50 75 100 125 150
Flow
1 5/16-12 UN-2B
Operation
2 1 The RV06A allows flow from port 1 to port 2, while normally blocking flow in the
opposite direction.
The valve remains closed by bias spring until sufficient pressure is applied at port
1at which time the ball lifts off the seat and allows flow from port 1 to port 2.
Features
• Hardened closing element to ensure extended service life and low leakage
• Multiple bias spring options for back pressure application flexibility
• Fast closing and seating
• All external surfaces zinc-plated
Specifications
Operating Pressure 5000 psi (350 bar)
Maximum Flow Rate 5 gpm (19 l/min)
Internal Leakage 5 drops/min at 5000 psi (350 bar)
Standard Cracking Pressures 5 psi (0.35 bar)
30 psi (2.1 bar)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics
with lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
2 Finisher: 02582047
Cartridge Weight 0.1 lb (45 g)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
1 Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS062-N P/N: 02610184
Viton® FS062-V P/N: 02610185
Performance
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
300
20
250
Pressure Drop
15
200
10 150
100
5
50
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 19
Flow
0.55
(14)
Cracking Pressure
5 = 5 psi (0.35 bar)
30 = 30 psi (2.1 bar)
(38.1)
1.5
(56.6)
2
2.23
(50.8)
2
0.28
(7.1)
1
0.25 1.5 1.0 Thick
(6.4) (38.1) (25.4)
2.0
(50.8)
0.25
(6.4)
0.06
(1.5)
(20.8)
0.82
1
ø0.47
(ø11.9)
9/16-18 UNF-2A
ø0.69
(ø17.5)
2 1 Operation
The RV08A allows flow from port 1 to port 2, while normally blocking flow in the
opposite direction. The valve remains closed by bias spring until
sufficient pressure is applied at port 1 at which time the ball lifts off the seat and
allows flow from port 1 to port 2.
Features
• Hardened closing element to ensure extended service life and low leakage
• Multiple bias spring options for back pressure application flexibility
• Fast closing and seating
• Low pressure drop
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage >2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 5 psi (0.35 bar)
15 psi (1.00 bar)
30 psi (2.00 bar)
70 psi (5.00 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
100
50
Cracking Pressure 5 psi
0 0 gpm
0 2 4 6 8 10
l/min
0 5 10 15 20 25 30 35
Flow
(15.5)
(50)
0.61
1
1.13 Thick
0.13 1.62
(28.7)
(3.3) (41.1)
2.0
(50)
1/4” HEX
0.37
(9.5)
0.08
(2.0)
(28)
1.1
ø0.5
(12.7)
Operation
2 1 The RV10A allows flow from port 1 to port 2, while normally blocking flow in
the opposite direction. The valve remains closed by bias spring until sufficient
pressure is applied at port 1 at which time the ball lifts off the seat and allows
flow from port 1 to port 2.
Features
• Hardened closing element to ensure extended service life and low leakage
• Multiple bias spring options for back pressure application flexibility
• Fast closing and seating
• Low pressure drop
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 21 gpm (80 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 5 psi (0.35 bar)
15 psi (1.00 bar)
30 psi (2.00 bar)
70 psi (5.00 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
70 psi
10 150
Pressure Drop
100
30 psi
5
50
15 psi
05 psi
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70 80
Flow
0.752
(18.8)
05 = 5 psi (0.35 bar)
2 15 = 15 psi (1.00 bar)
(38.1)
1.5
1 1.25 Thick
(32)
0.2 1.77
(5) (45)
2.13
(55)
1/4” HEX
0.47
(12)
0.08
(2)
1.30
(33)
ø 0.63 (ø 15.88)
7/8-14 UNF-2A
ø1
(ø 25.4)
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lb
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lb
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
2 1 The RV12A allows flow from port 1 to port 2, while normally blocking flow in
the opposite direction. The valve remains closed by bias spring until sufficient
pressure is applied at port 1 at which time the poppet lifts off the seat and allows
flow from port 1 to port 2.
Features
• Hardened closing element to ensure extended service life and low leakage
• Multiple bias spring options for back pressure application flexibility
• Fast closing and seating
• Low pressure drop
• Fully guided check
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 31 gpm (120 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 5 psi (0.35 bar)
12 psi (0.80 bar)
25 psi (1.70 bar)
50 psi (3.40 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC12-2 (see Line Bodies & Cavities section)
1 Cavity Tools Rougher: 02580667
Finisher: 02580668
Cartridge Weight 0.44 Lbs. (0.20 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Seal Kits Buna-N FS122-N P/N: 03071298
Performance Viton® FS122-V P/N: 03071299
Measured at 158 SUS (34 cSt)
bar psi Toil = 115oF (46oC)
120
8
Pressure Drop
6 50 psi
80
4 25 psi
40
2 12 psi
05 psi
0 0 gpm
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
Flow
(25.1)
0.99
Cracking Pressure
05 = 5 psi (0.35 bar)
(57.2)
(89)
2.0 Thick
0.34
(8.6)
(50.8)
1
0.2 2.56
(5) (65)
3.0
(75)
3/8” HEX
0.08
(2)
0.51
(13)
1.81
(46)
ø0.88 (ø 22.23)
1 1-16-12 UN-2A
ø1.25
(ø31.8)
Operation
2 1 The RV16A allows flow from port 1 to port 2, while normally blocking flow in
the opposite direction. The valve remains closed by bias spring until sufficient
pressure is applied at port 1 at which time the poppet lifts off the seat and allows
flow from port 1 to port 2.
Features
• Hardened poppet to ensure extended service life and low leakage
• Multiple bias spring options for back pressure application flexibility
• Fast closing and seating
• Low pressure drop
• Fully guided check
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 6000 psi (420 bar)
Nominal Flow 44 gpm (165 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 5 psi (0.35 bar)
15 psi (1.00 bar)
30 psi (2.00 bar)
70 psi (5.00 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580250
Finisher: 02580251
Cartridge Weight 0.76 Lbs. (0.35 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Seal Kits Buna-N FS162-N P/N: 03052427
Performance Viton® FS162-V P/N: 03051758
Measured at 158 SUS (34 cSt)
bar psi TOil = 115˚F (46° C)
8
70 psi
90
6
Pressure Drop
60
4
30 psi
2 30 15 psi
05 psi
0 0 gpm
0 10 20 30 40
0 40 80 120 160 l/min
Flow
(25.1)
0.99
Cracking Pressure
05 = 5 psi (0.35 bar)
15 = 15 psi (1.00 bar)
(57.2)
3.82
(97)
2.25
2.0 Thick
0.34
(8.6)
(50.8)
1
0.2 2.56
(5) (65)
3.0
(75)
1/2” Hex
0.08
(2)
0.63
(16)
(46.5)
1.83
ø1.13 (ø28.6)
1 5/16-12 UN-2A
ø 1.5
(ø 38.1)
Operation
The RV06B allows flow from port 2 to port 1 once the sufficient pressure
is applied at port 2 to overcome the bias spring pressure of 5 psi (0.34 bar).
It normally blocks flow in the opposite direction.
3 The relief portion of the valve would remain closed until the predetermined
pressure setting is reached at port 2 to lift the spring opposed ball from its seat,
allowing flow from port 2 to port 3. Pressure at port 3 is directly additive to relief
pressure setting.
Features
• Combination of two functions n one cartridge
• Relief setting up to 5000 psi (350 bar)
• Relief setting adjustment screw cannot be backed out of the valve
• Adjustable under full pressure
• Fast closing and seating
• Hardened closing elements to ensure minimal wear and extend service life
• All external surfaces zinc-plated
Specifications
Operating Pressure 5000 psi (350 bar)
Maximum Flow Rate 4 gpm (15 l/min)
Internal Leakage 5 drops/min maximum to
75% of nominal setting.
Relief Pressure Ranges 0 to 3000 psi (0 to 207 bar)
0 to 5000 psi (0 to 350 bar)
Reseat Pressure 80% of crack pressure
3 Check Valve Bias Spring 5 psi (0.34 bar)
Cracking Pressure
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
2 Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No Orientation Restrictions
Cavity FC06-3 (see Line Bodies & Cavities section)
1 Cavity Tools Rougher: 02582050
Finisher: 02582051
Cartridge Weight 0.06 lb (27 g)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Performance – Relief Solid Thermoplastic Polyester back-up rings.
Measured at 135 SUS (28 cSt)
bar psi Seal Kits Buna-N FS063-N P/N: 02610186
Toil = 100°F (38°C)
400
6000 Viton® FS063-V P/N: 02610187
5000
300
4000
Pressure
200 3000
2000
100
1000
0 0 gpm
0 1 2 3 4
l/min
0 5 10 15
Flow
0.55
(14)
Relief Adjustment Options
(24.1)
0.95
1.0 Thick
(25.4)
Performance – Check Valve
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
10.4 150
1 8.6 125
0.25 1.5
(6.4) (38.1) 6.9 100
1.7 25
0 0 gpm
0 1 2 3 4
l/min
0 3.8 7.6 11.4 15.2
Flow
(39.4) Max
1.55 Max
(27.7)
1.09
0.13
(3.3)
3
(32.3)
1.27
1
ø0.44
(ø11.2)
ø0.47
(ø11.9)
9/16-18 UNF-2A
Operation
The RV06C allows flow from port 2 to port 1 once the sufficient pressure
is applied at port 2 to overcome the bias spring pressure of 5 psi (0.34 bar).
It normally blocks flow in the opposite direction.
3 The relief portion of the valve would remain closed until the predetermined
pressure setting is reached at port 2 to lift the spring opposed poppet from its
seat, allowing flow from port 2 to port 3. Pressure at port 3 is directly additive to
relief pressure setting.
Features
• Combination of two functions n one cartridge
• Relief setting up to 5000 psi (350 bar)
• Relief setting adjustment screw cannot be backed out of the valve
• Adjustable under full pressure
• Fast closing and seating
• Hardened closing elements to ensure minimal wear and extend service life
• All external surfaces zinc-plated
Specifications
Operating Pressure 5000 psi (350 bar)
Maximum Flow Rate 5 gpm (19 l/min)
Internal Leakage 5 drops/min maximum to
75% of nominal setting.
Relief Pressure Ranges 0 to 1800 psi (0 to 124 bar)
0 to 3000 psi (0 to 207 bar)
500 to 5000 psi (35 to 350 bar)
Reseat Pressure 80% of crack pressure
3 Check Valve Bias Spring 5 psi (0.34 bar)
Cracking Pressure
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
2 Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
1 Cavity FC06-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582050
Finisher: 02582051
Cartridge Weight 0.06 lb (27 g)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Performance – Relief Solid thermoplastic polyester back-up rings.
Measured at 135 SUS (28 cSt)
Seal Kits Buna-N FS063-N P/N: 02610186
bar psi TOil = 100°F (38°C)
5000
Viton® FS063-V P/N: 02610187
300
Pressure Drop
4000
250
200 3000
150
2000
100
1000
50
0 0 gpm
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
l/min
0 2 4 6 8 10 12 14 16 18
Flow
0.55
(14)
(24.1)
0.95
3
1.75
Setting
blank = Set at 50% maximum pressure for the range
2
(57.2)
2.25
4 60
0 0 gpm
0 1 2 3 4 5
l/min
0 3 6 9 12 15 18
Flow
(39.4) Max
1.55 Max
(27.7)
1.09
0.13
(3.3)
3
(32.3)
1.27
1
ø0.44
(ø11.2)
ø0.47
(ø11.9)
9/16-18 UNF-2A
ø0.69
(ø17.5) Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.36 lbs
FH063-AS4 02600492
anodized (245 bar) (0.16 kg)
Steel, 6000 psi 1.1 lbs
FH063-SS4 02600493
Zinc plated (420 bar) (0.50 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The RVD08A allows flow from V ports to C ports, while normally blocking flow in
the opposite direction. Flow will be allowed from C to V when pressure is applied
at the opposite V port.
The check is spring biased at 30 psi to assure holding in no load conditions. A
sealed pilot piston option with check spring bias of 70 psi is available.
V1 V2
Features
• Hardened closing element in a check valve to ensure extended service life
and low leakage
• Multiple bias spring options for back pressure application flexibility
• Optional sealed pilot piston
• Check section serviceable as a cartridge
• All external surfaces zinc-plated
• Aluminum and steel inline housing
V1 V2
Specifications
Operating Pressure 6000 psi (420 bar) - Steel body
3500 psi (245 bar) - Aluminum body
Nominal Flow 10 gpm (38 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 30 psi (2.00 bar)
70 psi (5.00 bar)
Pilot Ratio 4.5 to 1
Fluid Operating Temp. Range* -4° to 248°F (-20° to +120°C)
C1 C2 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cartridge Weight 1.33 Lbs. (0.61 kg) Aluminum
3.3 Lbs. (1.5 kg) Steel
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Pilot Piston Material Hardened steel
Performance Pilot Piston Service Part Standard Piston Assy: 02610072
Measured at 158 SUS (34 cSt) Numbers Sealed Piston Assy (Buna-N): 02610071
bar psi Toil = 115°F (46°C)
300
Sealed Piston Assy (Viton®): 02610070
20
Piston Only: 02600019
250 C V pilot open Seal Kits (for RV08A) Buna-N FS082-N P/N: 03033920
V C free flow Viton® FS082-V P/N: 03051756
15
200 Seal Kits (Pilot Piston) Buna-N P/N: 02610078
Pressure Drop
0 0 gpm
0 2 4 6 8 10
l/min
0 10 20 30 38
Flow
(31.8)
1.25
Seals
N = Buna-N
V = Viton®
NS = Buna-N with Sealed Piston (Requires 70 psi spring)
(15.9)
0.63
(63.5)
(38.1)
2.5
1.5
C2 C1
2
0.41 (50.8) 4 0.41
(10.5) (101.6) (10.5)
SAE-6 Ports
0.61
(15.6) 3.39
(86.1)
Operation
The RVD10A allows flow from V ports to C ports, while normally blocking flow in
the opposite direction. Flow will be allowed from C to V when pressure is applied
at the opposite V port.
The check is spring biased at 30 psi to assure holding in no load conditions. A
sealed pilot piston option with check spring bias of 70 psi is available.
V1 V2
Features
• Hardened closing element in a check valve to ensure extended service life
and low leakage
• Multiple bias spring options for back pressure application flexibility
• Optional sealed pilot piston
• Check section serviceable as a cartridge
• All external surfaces zinc-plated
• Aluminum and steel inline housing
V1 V2
Specifications
Operating Pressure 6000 psi (420 bar) - Steel body
3500 psi (245 bar) - Aluminum body
Nominal Flow 21 gpm (80 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Bias Spring Pressures 30 psi (2.00 bar)
70 psi (5.00 bar)
Pilot Ratio 4.5 to 1
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
C1 C2 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cartridge Weight 1.54 Lbs. (0.7 kg) Aluminum
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Pilot Piston Material Hardened Steel
Pilot Piston Service Part Standard Piston Assy: 02610066
Performance Numbers Sealed Piston Assy (Buna-N): 02610064
Measured at 158 SUS (34 cSt) Sealed Piston Assy (Viton®): 02610065
bar psi Toil = 115°F (46°C) Piston Only: 02600003
400
25 Seal Kits (for RV10A) Buna-N FS102-N P/N: 03033872
C V pilot open
Viton® FS102-V P/N: 03051757
V C free flow
20 300 Seal Kits (Pilot Piston) Buna-N P/N: 02610076
Viton® P/N: 02610077
Pressure Drop
10
100
5
0 0 gpm
0 5 10 15 20
20 40 l/min
0 60
Flow
(31.8)
SS8 = SAE-8 Ports, steel Body
1.25
Seals
N = Buna-N
(15.9)
0.63
V = Viton®
NS = Buna-N with Sealed Piston (Requires 70 psi spring)
VS = Viton® with Sealed Piston (Requires 70 psi spring)
ø 0.41
Cracking Pressure
(10.5)
(31.8)
1.25
(11.9)
0.47
2 Places
70 = 70 psi (5.00 bar)
V2 V1
Pilot Piston Assembly
(39.7)
1.56
Standard Options N, V = P/N: 02610066
Sealed NS Option = P/N: 02610064
Sealed VS Option = P/N: 02610065
C2 C1
2.25
(51.15)
4.5 0.53
(114.3) (13.5)
0.75
(19.1) 3.75
(95.2)
SAE-8 Ports
Operation
The RVS08A allows flow from port V to port C, while normally blocking flow in the
opposite direction. Flow will be allowed from C to V when pressure is applied at
pilot port P.
The check is spring biased at 30 psi to assure holding in no load conditions. A
sealed pilot piston option with check spring bias of 70 psi is available.
P (pilot)
Features
• Hardened closing element in a check valve to ensure extended service life
V (valve) •
and low leakage
Multiple bias spring options for back pressure application flexibility
• Optional sealed pilot piston
• Check section serviceable as a cartridge
• All external surfaces zinc-plated
• Aluminum and steel inline housing
Specifications
V Operating Pressure 6000 psi (420 bar) - Steel body
3500 psi (245 bar) - Aluminum body
Nominal Flow 10 gpm (38 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 30 psi (2.00 bar)
P 70 psi (5.00 bar)
Pilot Ratio 4.5 to 1
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
C Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cartridge Weight 1.0 Lbs. (0.45 kg) Aluminum
2.6 Lbs. (1.18 kg) Steel
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Pilot Piston Material Hardened steel
Pilot Piston Service Part Standard Piston Assy: 02610069
Performance Numbers Sealed Piston Assy (Buna-N): 02610067
Measured at 158 SUS (34 cSt) Sealed Piston Assy (Viton®): 02610068
bar psi Toil = 115°F (46°C)
300
Piston Only: 02600016
20
Seal Kits (for RV08A) Buna-N FS082-N P/N: 03033920
250 C V pilot open Viton® FS082-V P/N: 03051756
V C free flow
15 Seal Kits (Pilot Piston) Buna-N P/N: 02610078
200 Viton® P/N: 02610079
Pressure Drop
100
5
50
0 0 gpm
0 2 4 6 8 10
l/min
0 10 20 30 38
Flow
(31.8)
1.25
SS6 = SAE-6 Ports, steel Body
(Pilot Port = SAE-4)
Seals
0.53 N = Buna-N
(13.5) V = Viton®
ø 0.28 NS = Buna-N with Sealed Piston (Requires 70 psi spring)
(7.14) VS = Viton® with Sealed Piston (Requires 70 psi spring)
Cracking Pressure
SAE 4 Port 30 = 30 psi (2.00 bar)
70 = 70 psi (5.00 bar)
V
Pilot Piston Assembly
(63.5)
2.5
P
1.58
(40)
Standard Options N, V = P/N: 02610069
Sealed NS Option = P/N: 02610067
Sealed VS Option = P/N: 02610068
C
0.63 0.41
(15.9) 1.97 0.64 (10.5)
(50) (16.2)
3.12
(79.2)
(15.9)
0.63
Operation
The RVS10A allows flow from port V to port C, while normally blocking flow in the
opposite direction. Flow will be allowed from C to V when pressure is applied at
pilot port P.
The check is spring biased at 30 psi to assure holding in no load conditions. A
sealed pilot piston option with check spring bias of 70 psi is available.
P (pilot)
Features
• Hardened closing element in a check valve to ensure extended service life
V (valve) and low leakage
• Multiple bias spring options for back pressure application flexibility
• Optional sealed pilot piston
• Check section serviceable as a cartridge
• All external surfaces zinc-plated
• Aluminum and steel inline housing
Specifications
V Operating Pressure 6000 psi (420 bar) - Steel body
3500 psi (245 bar) - Aluminum body
Nominal Flow 21 gpm (80 l/min)
Internal Leakage <2 drops/min. at 6000 psi
(0.10 cc/min at 420 bar)
Standard Cracking Pressures 30 psi (2.00 bar)
P 70 psi (5.00 bar)
Pilot Ratio 4.5 to 1
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
C Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cartridge Weight 1.17 Lbs. (0.53 kg) Aluminum
2.88 Lbs. (1.31 kg) Steel
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Pilot Piston Material Hardened steel
Pilot Piston Service Part Standard Piston Assy: 02610075
Performance Numbers Sealed Piston Assy (Buna-N): 02610073
Measured at 158 SUS (34 cSt) Sealed Piston Assy (Viton®): 02610074
bar psi Toil = 115°F (46°C)
400
Piston Only: 02600000
25 Seal Kits (for RV08A) Buna-N FS082-N P/N: 03033872
C V pilot open
Viton® FS082-V P/N: 03051757
V C free flow
20 300 Seal Kits (Pilot Piston) Buna-N P/N: 02610076
Viton® P/N: 02610077
Pressure Drop
10
100
5
0 0 gpm
0 5 10 15 20
20 40 l/min
0 60
Flow
(15.9)
0.63
AS8 = SAE-8 Ports, aluminum Body
SS8 = SAE-8 Ports, steel Body
(Pilot Port = SAE-6)
Seals
0.53
ø 0.41” (13.5) N = Buna-N
(10.5) V = Viton®
2 Places NS = Buna-N with Sealed Piston (Requires 70 psi spring)
VS = Viton® with Sealed Piston (Requires 70 psi spring)
3.62
(92) Cracking Pressure
(11.9)
0.47
SAE 6 Port 2.5 30 = 30 psi (2.00 bar)
(63.5) 70 = 70 psi (5.00 bar)
V
Pilot Piston Assembly
(63.5)
P
2.5
(39.7)
1.56
Standard Options N, V = P/N: 02610075
Sealed NS Option = P/N: 02610073
Sealed VS Option = P/N: 02610074
C
0.63
(15.9)
1.25
(31.8) 0.75
(19.1)
SAE 8 Port
Features
• Excellent stability through entire flow range
• Adjustable across specified pressure range
• Positive stop prevents spring from over adjustment (options V, H)
• Stroke limiting device for enhanced safety
• Internal seals to minimize leakage
• Same cavity as the RP08A-01 P.O. Check valve.
• Hardened poppet and seat to ensure extended service life and low leakage
• All external surfaces zinc-plated
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
3
Internal Leakage 5 drops/min. (0.25 cc/min) max.
to 80% of nominal settings
2 Pilot Ratios 3:1, 4:1
Check Valve Cracking Pressure 14 psi (1.0 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
Performance lubricating properties
bar psi 3:1 Pilot Ratio Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
7000 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
400 6000
Installation No orientation restrictions
5000
Pressure
400 6000
5000
Pressure
300
4000
200 3000
2000
100
1000
0 0
0 1 2 3 4 5 6 7 8 9 10 11 gpm
0 5 10 15 20 25 30 35 40 l/min
Flow
9/16” HEX
9/16” HEX 1” HEX1” HEX N = Buna-N
5/32”
5/32” HEXHEX TorqueTorque
29.5-36.929.5-36.9
ft-lbs ft-lbs V = Viton®
9/16” HEXHEX
9/16” (Torque 1” HEX
1”(Torque
40-50 40-50
Nm) Nm)
(15.2)
HEX Pilot Ratio
0.60
TorqueTorque
Note: Note:29.5-36.9
29.5-36.9
Rotating ft-lbs
Rotating
adjustment ft-lbs
adjustment
screw (Torque
3 = 3:1
(Torqueclockwise
screw
40-50 40-50
clockwise
increases
Nm) Nm)
increases
the pressure
the pressure
setting. setting. 4 = 4:1
Note: Rotating adjustment
Max.)
(84.7 Max.)
(84.7 Max.)Max.
3 Adjustment Range
0.28 (29.7) 1.17 0.28 (29.7)
screw clockwise
screw clockwise increases
increases
1.17
the pressure
the pressure setting.setting. 500 = 700 to 5000 psi (48 to 350 bar)
Max.)
3.33 Max.
2
3.33 Max.
(84.7
3.33
(53.8)
2.12
Adjustment Options
(15.2)(15.2)
(15.2)
0.60 0.60
(15.2) 0.60
F = Factory pre-set, non-adjustable
(7.1) 0.28 (29.7) (7.1)
(84.7
(66.5)
(53.8)
(29.7)
(66.5)(66.5) 2.12
1.17
1.17
(7.1)
(4.6)2
(omit) = Set at min. pressure for the range
2.62 2.12
2.12
(50.8)
(66.5)
2.62 2.62
2.62
1 1 1.13 1.13
(30) Thick
(30) Thick
0.18 0.18 2 2 1.13
1
(4.6) (4.6) (50.8) (50.8)1 1.13
(30) Thick
0.180.18 2 22.5 2.5 (30) Thick
(4.6)(4.6)ø1 (50.8) (60) (60)
(ø25.4) (50.8) 1.5
2.5
(60)
2.5
(60)
(38) Performance
Measured at 158 SUS (34 cSt)
bar psi
Adjustment Options o o
Toil = 115 F (46 C)
(85.7)
1000
3.37
(85.7 Max.)
ø1 Headø1 (std)
3.37 Max.
1.5 50
(ø25.4) (38) 1.5
(38) 40 600
1.6
(85.7)
1.36 (85.7)
3.37
(85.7) 3.37
Max.)
(85.7 Max.)
Max.
3.37 Max.
30
400
(85.7)
3.37
Max.)
Max.
20
3.37
(85.7 Max.)
(65.2)
(65.2)
3.37 Max.
2.57
2.57
3.37
(85.7
(41.3)
200 1 2 1
(65.2)
2 1 2
2.57
10
3.37
(85.7
1 2
(65.2)
2.57
gpm
0.06
1.6 0.06
0 0
1.61.6
1.6
0 1 2 3 4 5 6 7 8 9 10 11
0.06
0 5 10 15 20 25 30 35 40
ø0.63 (15.88) Flow
(41.3)
1.36
(41.3) 1.36
ø 0.95 (24)
(41.3)
1.36
3/4- 16UNF- 2A
1.36
ø0.56 ø0.56
(14.27)(14.27)
ø0.56 (14.27)
ø0.63 ø0.63
(15.88)(15.88)
ø0.63
ø 0.95 (15.88)
ø0.56 (14.27)
ø(24)
0.95 (24)
ø 0.95 (24)(15.88)
3/4-ø0.63
16UNF-
3/4-
9/16” HEX16UNF-
2A 2A
3/4- ø16UNF- 2A
0.95 (24)
3/4- 16UNF- 2A
‘K’ - Protective Cap ‘F’ - Tamper Proof Cap
(93.8)
3.69
(87.3)
3.44
9/16” HEX
9/16” HEX
9/16” HEX
9/16” HEX
(93.8)
(93.8)
3.69
(93.8)3.69
(87.3)
(87.3)
(93.8)
3.44
(87.3)3.44
3.69
(87.3)
3.44
3.44
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.58 lb
FH083-AS6 03011424
anodized (245 bar) (0.26 kg)
Steel, 6000 psi 1.70 lb
FH083-SS6 00560920
Zinc plated (420 bar) (0.77 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Overview
HYDAC offers various options of Differential Pressure Sensing Valves for
applications up to 5000 psi (350 bar) and up to 80 gpm(300 l/min).
Differential pressure sensing valves can be used for controlling pressure,
flow, direction or compensation. They are functional building elements
which respond to pressure inputs, providing for switching or modulation of
the flow. The choice of circuit arrangements related to the Pressure Sensing
valves can simplify the circuit design and minimize the size of the manifold,
thus reducing manifold cost.
Features
• Operating pressure up to 5000 psi (350 bar)
• Various spring ranges
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure
minimal wear and extend service life
• Industry common cavity
3 Operation
Pilot flow through the spool orifice, from port 1 to port 3 creates a pressure drop
and allows flow from port 1 to port 2 when the pressure drop exceeds the spring
bias pressure. The valve can be remotely controlled at port 3 such as relief or
2 solenoid valve.
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm (151 l/min)
Internal Leakage 30.5 cu in/min at 5000 psi (0.5 l/min at 350 bar)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-based or synthetics with
3 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC10-S3 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02581794
Finisher: 02581795
Cartridge Weight 0.35 lb (0.158 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
1 Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS10S3-N P/N: 02610278
Viton® FS10S3-V P/N: 02610279
Vent Flow Rate Approximately 0.15 gpm ( 0.57 lpm)
Performance Application
1 to 2; Port 3 vented Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
35
1
500
30
400
300
25
Pressure Drop
225
20 300
15 150
200
no spring
10
100
75 3
5
0 0 gpm
0 5 10 15 20 25 30 35 40 45
l/min 2 DW10SA Pilot Relief Valve
0 35 70 100 135 170
Flow Pressure Relief / Sequence Application
(14.7)
0.58
Seals
N = Buna-N
V = Viton®
Bias Spring
75 = 75 psi
150 = 150 psi
(31.8)
1.25
(91.4)
225 = 225 psi
3.6
3 300 = 300 psi
(57.2)
2.25
(69.9)
2.75
0.28
(7.1)
1
0.25 2.0
(6.4) (50.8) 1.25 Thick
2.5 (31.8)
(63.5)
(22.1)
0.87
0.28
(7.1)
3
1.85
(47)
1
ø0.69
(ø17.5)
ø0.75
(ø19.1)
7/8-14 UNF-2A
ø1.063
(ø27)
3 Operation
Pilot flow through the spool orifice, from port 1 to port 3 creates a pressure drop
and allows flow from port 1 to port 2 when the pressure drop exceeds the spring
bias pressure. The valve can be remotely controlled at port 3 such as relief or
2 solenoid valve.
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 75 gpm (284 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
3 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC16-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581797
Finisher: 02581798
2 Cartridge Weight 1.0 lb (0.454 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS16S3-N P/N: 02610198
1 Viton® FS16S3-V P/N: 02610199
Vent Flow Rate Approximately 0.15 gpm (0.57 lpm)
Performance Application
20 300
225
Pressure Drop
250
15
200
150
10 150
100
75
no spring
3
5
50
0 0
2
gpm
0 10 20 30 40 50 60 70 80
l/min
DW16SA Pilot Relief Valve
0 60 120 180 240 300
Flow Pressure Relief / Sequence Application
Seals
N = Buna-N
V = Viton®
Bias Spring
75 = 75 psi
(38.4)
1.51
150 = 150 psi
3 225 = 225 psi
(116.1)
300 = 300 psi
4.57
(73.1)
2.88
(88.9)
3.50
0.34
(8.6)
0.23
1 3.04
2.0 Thick
(5.8) (77.2)
(50.8)
3.50
(88.9)
(21.6)
0.85
0.27
(6.9)
3
(55.9)
2.20
1
ø1.0
(ø25.4)
ø1.13
(ø28.7)
1 5/16-12 UN-2A
ø1.56
(ø39.6)
1 Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
3 Installation No orientation restrictions
Cavity FC10-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581794
Finisher: 02581795
Cartridge Weight 0.35 lb (0.158 kg)
2 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS10S3-N P/N: 02610278
Viton® FS10S3-V P/N: 02610279
1 Vent Flow Rate Approximately 0.15 gpm (0.57 lpm)
Performance Application
30 Port 2 to 1
Pressure Drop
400
25
300
3
20
15
200
10
100
5
0 0 gpm
0 5 10 15 20
l/min
1 DW10SC Pilot Relief Valve
0 10 20 30 40 50 60 70
Flow Pressure Reducing Application
(14.7)
0.58
Seals
N = Buna-N
V = Viton®
Bias Spring
100 = 100 psi
(31.8)
(91.4)
3.60
300 = 300 psi
(57.2)
2.25
(69.9)
2
2.75
Compensation
2 to 1: orifice downstream Measured at 135 SUS (28 cSt)
l/min gpm TOil = 100°F (38°C)
70 18
16
60 300 psi
14
0.28
(7.1)
50
12
1 40 10
200 psi
Flow
0.25 2.0
(6.4) (50.8) 1.25 Thick 30 8
(31.8) 6
2.5 20 100 psi
(63.5) 4
10
2
0 0
0 1000 2000 3000 4000 5000 psi
0.28
(7.1)
3
1.85
(47)
1
ø0.69
(ø17.9)
ø0.75
(ø19.1)
7/8-14 UNF-2A
ø1.063
(ø27)
1 Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 19 gpm (72 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
3 Installation No orientation restrictions
Cavity FC16-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581797
Finisher: 02581798
Cartridge Weight 1.0 lb (0.454 kg)
2 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS16S3-N P/N: 02610198
Viton® FS16S3-V P/N: 02610199
1 Vent Flow Rate Approximately 0.15 gpm (0.57 lpm)
Performance Application
35 500
Pressure Drop
30
25
400 3
20 300
15 200
10
100
5
0
0 5 10 15 20 25 30 35 40 45 gpm 1 DW16SC Pilot Relief Valve
0 35 70 100 135 170 l/min
Flow Pressure Reducing Application
Seals
N = Buna-N
V = Viton®
Bias Spring
100 = 100 psi
(38.4)
1.51
150 = 150 psi
200 = 200 psi
3
(116.1)
300 = 300 psi
4.57
(73.1)
2.88
(88.9)
3.50”
0.34
(8.6)
0.23”
1 3.04
2.0 Thick
(5.0) (77.2)
(50.8)
3.50
(88.9)
(21.6)
0.85
0.27
(6.9)
3
(55.9)
2.20
1
ø1.0
(ø25.4)
ø1.13
(ø28.7)
1 5/16-12 UN-2A
ø1.56
(ø39.6)
Operation
The spool begins to shift when the pressure at port 1 exceeds the combined
3 pressure at port 3 plus the bias spring pressure. It is possible to create a
pressure compensated flow control package by connecting port 1 upstream
and port 3 downstream of a control orifice.
1
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC10-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581794
Finisher: 02581795
Cartridge Weight 0.35 lb (0.158 kg)
2 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Seal Kits Buna-N FS10S3-N P/N: 02610278
Viton® FS10S3-V P/N: 02610279
Performance Application
35 500
30 Port 2 to 1 3
Pressure Drop
400
25
300
20
INLET 2 1
15
200
Pressure
10
Compensated
5
100
External fixed or
Flow
0 0 gpm
Variable orifice
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70
Flow Pressure Compensated Flow Regulator
(14.7)
0.58
Seals
N = Buna-N
V = Viton®
Bias Spring
100 = 100 psi
(31.8)
1.25
(91.4)
300 = 300 psi
3.60
3
(57.2)
2.25
(69.9)
2.75
2 Compensation
2 to 1: orifice downstream Measured at 135 SUS (28 cSt)
l/min gpm TOil = 100°F (38°C)
70 18
16
60 300 psi
14
0.28
(7.1)
50
12
1 40 200 psi
0.25 2.0 10
Flow
(6.4) (50.8) 1.25 Thick 30 8
2.50 (31.8) 6
20 100 psi
(63.5) 4
10
2
0 0
0 1000 2000 3000 4000 5000 psi
0.28
(7.1)
3
1.85
(47)
1
ø0.69
(ø17.5)
ø0.75
(ø19.1)
7/8-14 UNF-2A
ø1.063
(ø27)
3 Operation
The spool begins to shift when the pressure at port 1 exceeds the combined
pressure at port 3 plus the bias spring pressure. It is possible to create a
pressure compensated flow control package by connecting port 1 upstream and
1 port 3 downstream of a control orifice.
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 19 gpm (72 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC16-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581797
l/min
110
gpm
30 2 Finisher: 02581798
100 300 psi Cartridge Weight 1.0 lb (0.454 kg)
25
90
Cartridge Material Steel with hardened work surfaces.
80
20
200 psi Zinc plated exposed surfaces.
1 Buna N or Viton® o-rings
70
60 150 psi
15
50
Seal Kits Buna-N FS16S3-N P/N: 02610198
100 psi
40
10 Viton® FS16S3-V P/N: 02610199
30
20 5
10
0 0 psi
0 1000 2000 3000 4000 5000
bar
0 50 100 150 200 250 300 350
Pressure
Performance Application
35 500 3
30
400
Pressure
25
300 INLET 2 1
20
15
200 Pressure
10 Compensated
100 External fixed or
5 Flow
gpm
Variable orifice
0 0
0 5 15 25 35 45
l/min
0 35 70 100 135 170
Bias Spring
100 = 100 psi
(38.4)
1.51
150 = 150 psi
200 = 200 psi
3
(116.1)
300 = 300 psi
4.57
(73.1)
2.88
2 Compensation
l/min gpm
110 30
(88.9)
3.50
100 300 psi
90 25
80 200 psi
20
70
0.34
(8.6)
Flow
60 150 psi
15
50
0.23
1 3.04
40
10
100 psi
2.0 Thick 30
(5.8) (77.2)
(50.8) 20 5
3.50 10
(88.9) 0 0
0 1000 2000 3000 4000 5000
psi
bar
0 50 100 150 200 250 300 350
Pressure
45
600
40
35 500
30
400
Pressure
25
0.27
(6.9)
20 300
15
3
200
10
(55.9)
2.20
100
5
0 0 gpm
0 5 15 25 35 45
l/min
0 35 70 100 135 170
2 Flow
1
ø1.00
(ø25.4)
ø1.13
(ø28.7)
1 5/16-12 UN-2A
ø1.56
(ø39.6)
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 2.34 lb
FH16S3-AS16 02582078
anodized (245 bar) (1.06 kg)
Steel, 6000 psi 6.80 lbs
FH16S3-SS16 02582079
zinc plated (420 bar) (3.09 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
3 The spool begins to shift allowing flow from port 1 to port 2 only when pressure
at port 1 exceeds the combined pressure at port 3 plus the bias spring pressure
setting. With no pressure at port 3, flow will be allowed from port 1 to port 2 once
the bias spring force is overcome with pressure at port 1.
It is also possible to create pressure compensation by connecting port 1
2 upstream and port 3 downstream of a control orifice.
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm (151 l/min)
Internal Leakage 5 cu in/min at 3000 psi (82cc/min at 207 bar)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
3 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC10-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581794
2 Finisher: 02581795
Cartridge Weight 0.35 lb (0.158 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
1 Seal Kits Buna-N FS10S3-N P/N: 02610278
Viton® FS10S3-V P/N: 02610279
Performance Application
225
1 Variable orifice
20 300
15 150
200
no spring
10
100
75 3
5 2
0 0 gpm
0 5 10 15 20 25 30 35 40 45 By-Pass Flow
l/min
0 35 70 100 135 170
Flow Pressure Compensated Priority Flow Regulator
(14.7)
0.58
(Pilot Port = SAE-6)
Seals
N = Buna-N
V = Viton®
Bias Spring
(31.8)
75 = 75 psi
1.25
(91.4)
150 = 150 psi
3.60
3 225 = 225 psi
300 = 300 psi
(57.2)
2.25
(69.9)
2.75
2
0.28
(7.1)
1
0.25 2.0
(6.4) (50.8) 1.25 Thick
(31.8)
2.50
(63.5)
(22.1)
0.87
0.28
(7.1)
3
1.85
(47)
1
ø0.69
(ø17.5)
ø0.75
(ø19.1)
7/8-14 UNF-2A
ø1.063
(ø27)
Operation
3 The spool begins to shift allowing flow from port 1 to port 2 only when pressure
at port 1 exceeds the combined pressure at port 3 plus the bias spring pressure
setting. With no pressure at port 3, flow will be allowed from port 1 to port 2 once
the bias spring force is overcome with pressure at port 1.
It is also possible to create pressure compensation by connecting port 1
2 upstream and port 3 downstream of a control orifice.
Features
• Operating pressure up to 5000 psi (350 bar)
• Various bias spring settings up to 300 psi (20.7 bar)
• Quiet, modulated response
• All external surfaces zinc-plated
• Hardened spool and sleeve to ensure minimal wear and extend service life
• Industry common cavity
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 75 gpm (284 l/min)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
3 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC16-S3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02581797
Finisher: 02581798
Cartridge Weight 1.0 lb (0.454 kg)
2 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings
Solid thermoplastic polyester back-up rings
Seal Kits Buna-N FS16S3-N P/N: 02610198
1 Viton® FS16S3-V P/N: 02610199
Performance Application
1 Controlled Flow
17 250
Variable orifice
14
100 200
150
10 150
7 100
50 75
3
no spring
3 50 2
00 0 gpm
0 10 20 30 40 50 60 70 80 By-Pass Flow
l/min
0
0 1 50 2 3
100 4 150 5 6
200 7 250 8 9
300
Flow Pressure Compensated Priority Flow Regulator
Bias Spring
75 = 75 psi
(38.4)
1.51
150 = 150 psi
200 = 200 psi
3
(116.1)
4.57
300 = 300 psi
(73.1)
2.88
(88.9)
3.50
0.34
(8.6)
0.23 1 3.04
2.0 Thick
(5.8) (77.2)
(50.8)
3.50
(88.9)
(21.6)
0.85
0.27
(6.9)
3
(55.9)
2.20
1
ø1.00
(ø25.4)
ø1.13
(ø28.7)
1 5/16-12 UN-2A
ø1.56
(ø39.6)
Overview
Poppet Type Solenoid Valves
Poppet type valves are intended for use as load holding and blocking devices in
hydraulic circuits requiring very low internal leakage. HYDAC offers a variety of
Poppet type two-way and three-way normally closed or normally open unidirectional
or bi-directional load holding and blocking valves. Models are available for flows up
to 40 gpm (150 l/min) with pressure ratings up to 5000 psi (350 bar).
All HYDAC poppet valves are tested on an automated test stand measuring internal
leakage by monitoring pressure decay, not counting drops per minute. HYDAC
Poppet valves therefore provide reliable load holding and assure minimum pressure
decay at the actuator.
Features
• Low pressure drop
• Wet armature construction
• Standard Water/Weather resistant coils
rated up to IP69K
• Wide voltage range
• Coils are rated for continuous duty
operation
• Wide variety of voltages and molded-in
connectors
• Cartridges are voltage interchangeable
• Manual overrides available on all models
• One piece body minimizes the effects of
eccentricity
• All exposed cartridge surfaces are resistant
corrosion
• Industry common cavity-compact size
Operation
When de-energized the WS06Y allows flow from port 2 to port 1, while flow from
port 1 to port 2 is severely restricted. When energized the valve’s poppet closes
on its seat, blocking flow from port 2 to port 1. Flow from port 1 to port 2 is
1 allowed when hydraulic pressure generated overcomes solenoid force.
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 3.5 gpm (13.3 l/min)
Internal Leakage Leaktight, less than 5 drops/min.
at 5000 psi (350 bar)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Minimum Pull-in Current 70% of nominal amperage
to Operate Valve
Typical Response Time Energized: 50ms
(Varies with Pressure and Flow) De-Energized: 35ms
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies and Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
Cartridge Weight 2.7 oz (75 grams)
2 Coil Weight 3.1 oz (88 grams)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
1 Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation.
Seal Kits Buna-N FS062-N P/N: 02610184
Viton® FS062-V P/N: 02610185
Performance
Measured at 135 SUS (28 cSt)
bar psi
Toil = 100° F (38° C)
20 300
250
15
2 1 De-energized
Pressure Drop
200
10 150
100
5
50
gpm
0 0
0 1 2 3 4 5
l/min
0 5 10 15
Flow
C = Cartridge only
AS4 = SAE-4 Ports, aluminum body
SS4 = SAE-4 Ports, steel body
Seals
11/16” HEX N = Buna-N
Torque 12-15 ft-lbs V = Viton®
(Torque 16-20 Nm) Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
0.55
(14)
24 = 24 VDC
AC 115 = 105 VDC (only available with connector DG)
2
(50.8)
(38.1)
1.50
(All model 32-1329 coils are DC. AC models require an external diode bridge
mounted outside the coil)**
Coil Connector
DG = EN 175301-803-B (IP65 Rated)**
DC DL = Leadwires (2) - 18” long (46 cm) AWG18, TYPE UL 1815
0.28
(7.1)
(IP69K Rated)*
DN = Deutsch DT04-2P integral molded (IP69K Rated)*
1.0 Thick
0.25 1.5 1 (25.4)
Use mating plug EN 175301-803-B without diode bridge for
DC voltages P/N 02600570
(6.4) (38.1)
2.0 Use mating plug EN 175301-803-B w/diode bridge for
(50.8) AC voltages P/N 02600582
Coil Model 32-1329
For other coil connector types consult factory
** Mating Plugs sold separately
*Coils with internal transient suppression diode are available, consult factory.
ø1.13
(ø28.7) 1.33
(33.8)
(58.4) Max
2.30 Max
0.36
(9.1)
0.04
(1)
(21.3)
0.84
1
ø0.47
(ø11.9)
Standard Line Bodies*
9/16-18 UNF-2A
Pressure
Code Part No Material Weight
ø0.69 Rating
(ø17.9) Aluminum, 3500 psi 0.33 lbs
FH062-AS4 02600491
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 0.97 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08Y allows flow from port 2 to port 1, while flow
from port 1 to port 2 is severely restricted. If this flow path is required see
model WS08YR. When energized the valve’s poppet closes on its seat, blocking
1 flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (130 to 290 psi (9 to 20 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized: 50ms
De-Energized: 35ms
Fluid Compatibility Mineral-Based or Synthetics with
2 lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406).
Use with filter rated ß10 ≥ 200.
1 Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies and Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Coil Weight 0.42 Lbs. (0.19 kg
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Performance Coil Material Class N high temperature magnet wire,
psi
Measured at 158 SUS (34 cSt) steel shell, polyamid encapsulation.
bar
Toil = 115°F (46°C)
125 Seal Kits Buna-N FS082-N P/N: 03033920
Viton® FS082-V P/N: 03051756
7.5 2 1
Pressure Drop
100 (De-energized)
5 75
50
2.5
25
0 0 gpm
0 2 4 6 8 10
0 10 20 30 38 l/min
Flow
(69.5 Max.)
2.8 Max.
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
2
(15.5)
0.61
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
Coil Connector
1.50
(38)
0.28
(7.1)
DC DG = EN 175301-803-A
(50)
2.0
ø1.43
(ø36.3) 0.94
(23.8)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
2
(28)
1.1
1
ø0.5
(ø12.7) 3/4-16UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS10Y allows flow from port 2 to port 1, while flow from
1 port 1 to port 2 is severely restricted. If this flow path is required see model
WS10YR. When energized the valve’s poppet closes on its seat, blocking flow
from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (36 to 145 psi (2.5 to 10 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 20 gpm (75 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 55 ms
De-energized 35 ms
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.40 Lbs. (0.182 kg)
Coil Weight 0.42 Lbs. (0.190 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 158 SUS (34 cSt) Coil Material Class N high temperature magnet wire,
bar psi T Oil = 115oF (46oC) steel shell, polyamid encapsulation.
12 Seal Kits Buna-N FS102-N P/N: 03033872
2 1 De-energized Viton® FS102-V P/N: 03051757
10 150
Pressure Drop
8
100
6
4
50
2
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70 80
Flow
Seals
N = Buna-N
(72 Max.)
V = Viton®
1” HEX Coil Voltage
Torque 28-33 ft-lbs 0 = No coil, cartridge only
(Torque 38-45 Nm) DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(18.8)
2 AC 24 = 24 VAC
0.74
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
1.50
(38)
Coil Connector
0.28
(7.1)
2.13
(55)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
1.25 Thick DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
(32) DT = Amp Junior Timer™, molded, radial mount*
AC AG = EN 175301-803-A
0.20
1 1.77 Coil Model 40-1836
(5) (45) For other coil connector types consult factory
2.13 *Coils with internal diode are available, consult factory.
(55)
ø1.43
(ø36.3)
0.95
(24)
2.87 Max.
(73 Max.)
0.47
(12)
0.08
(2)
1.30
(33)
ø0.63 1
(ø15.88)
7/8-14 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lbs
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lbs
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS12Y allows flow from port 2 to port 1, while flow from
port 1 to port 2 is severely restricted. If this flow path is required see model
WS12YR. When energized the valve’s poppet closes on its seat, blocking flow
1 from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (22 to 94 psi (1.5 to 6.5 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 29 gpm (110 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 90 ms
De-energized 25 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
2 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC12-2 (see Line Bodies & Cavities section)
1 Cavity Tools Rougher: 02580667
Finisher: 02580668
Cartridge Weight 0.60 Lbs. (0.27 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi Toil = 115o F (46o C) Coil Material Class N high temperature magnet wire,
180 steel shell, polyamid encapsulation.
12
2 1 De-energized Seal Kits Buna-N FS122-N P/N: 03071298
10
150 Viton® FS122-V P/N: 03071299
Pressure Drop
120
8
6 90
4 60
2 30
0 0 gpm
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
Flow
C = Cartridge only
AS12 = SAE-12 Ports, aluminum body
SS12 = SAE-12 Ports, steel body
Seals
N = Buna-N
2.95 Max.
(75 Max.)
(73 Max.)
V = Viton®
1 1/4” HEX
Torque 74-80 ft-lbs Coil Voltage
(Torque 100-108 Nm) 0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(26.55)
1.05
AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(57.2)
2.25
DC DG = EN 175301-803-A
0.34
(8.6)
ø1.43
(ø36.3)
0.94
(23.8)
2.92 Max.
(74 Max.)
0.51
(13)
0.08
(2)
1.81
(46)
1
ø0.88
1 1/16-12UN-2A (ø22.23)
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 1.39 lbs
FH122-AS12 03053845
anodized (245 bar) (0.63 kg)
Steel, 6000 psi 4.16 lbs
FH122-SS12 03053772
Zinc plated (420 bar) (1.89 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS16Y allows flow from port 2 to port 1, while flow from
port 1 to port 2 is severely restricted. If this flow path is required see model
WS16YR. When energized the valve’s poppet closes on its seat, blocking flow
1 from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (15 to 45 psi (1 to 3 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm at 4060 psi (150 l/min at 280 bar)
26 gpm at 5000 psi (100 l/min at 350 bar)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 150 ms
De-energized 35 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
2 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580250
Finisher: 02580251
Cartridge Weight 1.37 Lbs. (0.62 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi Toil = 115oF (46oC)
12 Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
10 150 2 1 De-energized
Seal Kits Buna-N FS162-N P/N: 03052427
Viton® FS162-V P/N: 03051758
8
Pressure Drop
100
6
4
50
0 0 gpm
0 5 10 15 20 25 30 35 40
l/min
0 20 40 60 80 100 120 140 160
Flow
C = Cartridge only
AS16 = SAE-16 Ports, aluminum body
SS16 = SAE-16 Ports, steel body
Seals
(80.8 Max.)
3.18 Max.
N = Buna-N
(78.5 Max.)
(25.13)
0.99
AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(57.2)
2.25
DC DG = EN 175301-803-A
(75)
3.0
ø1.43
(ø36.3) 0.94
(23.8)
3.11 Max.
(79 Max.)
0.71
(18)
0.08
(2)
(46.5)
1.83
1
ø1.13
(ø28.5) 1 5/16-12UN-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 1.2 lbs
FH162-AS16 03037195
anodized (245 bar) (0.55 kg)
All measurements in inches (mm). Steel, 6000 psi 3.56 lbs
FH162-SS16 03032655
Subject to technical modifications Zinc plated (420 bar) (1.62 kg)
*Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08Y allows flow from port 2 to port 1, while flow
from port 1 to port 2 is severely restricted. If this flow path is required see
1 model WS08YR. When energized the valve’s poppet closes on its seat, blocking
flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (130 to 290 psi (9 to 20 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Filter screen on the inlet port for protection from contamination getting inside
the cartridge
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized: 50ms
2 De-Energized: 35ms
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties.
1 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406).
Use with filter rated ß10 ≥ 200.
Filter screen 300 µm mesh
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies and Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Coil Weight 0.42 Lbs. (0.19 kg
Performance
Cartridge Material Steel with hardened work surfaces.
Measured at 158 SUS (34 cSt)
psi Zinc plated exposed surfaces.
bar Toil = 115o F (46o C)
8
Buna N or Viton® o-rings.
PTFE back-up rings.
100 2 1 De-energized
Coil Material Class N high temperature magnet wire,
Pressure Drop
2 25
0 0 gpm
0 2 4 6 8
0 10 20 30 l/min
Flow
(69.5 Max.)
2.8 Max.
V = Viton®
Coil Voltage
0 = No coil, cartridge only
7/8” HEX
DC 12 = 12 VDC
Torque 18.5-22 ft-lbs
24 = 24 VDC
(Torque 25-30 Nm)
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(15.5)
2
0.61
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
Coil Connector
1.50
(38)
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3) 0.94
(23.8)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
(28)
1.1
1
ø0.5
(ø12.7) Standard Line Bodies*
3/4-16UNF-2A
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08YR allows flow from port 2 to port 1 and from
port 1 to port 2. When energized the valve’s poppet closes on its seat, blocking
1 flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (130 to 290 psi (9 to 20 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized: 50ms
De-Energized: 35ms
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties.
2
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406).
Use with filter rated ß10 ≥ 200.
1 Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies and Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Coil Weight 0.42 Lbs. (0.19 kg
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Performance Coil Material Class N high temperature magnet wire,
Measured at 158 SUS (34 cSt) steel shell, polyamid encapsulation.
bar psi Toil = 115o F (46o C) Seal Kits Buna-N FS082-N P/N: 03033920
125
Viton® FS082-V P/N: 03051756
7.5
100 1 2
Pressure Drop
(De-energized)
2 1
5 75 (De-energized)
50
2.5
25
0 0 gpm
2 4 6 8 10
l/min
0 10 20 30 38
Flow
(69.5 Max.)
2.8 Max.
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
2
(15.5)
0.61
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
Coil Connector
1.50
(38)
0.28
(7.1)
DC DG = EN 175301-803-A
(50)
2.0
ø1.43
(ø36.3) 0.94
(23.8)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
2
(28)
1.1
1
ø0.5
(ø12.7) 3/4-16UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS10YR allows flow from port 2 to port 1 and from
port 1 to port 2. When energized the valve’s poppet closes on its seat, blocking
1 flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (130 to 290 psi (9 to 20 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 20 gpm (75 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 55 ms
De-energized 35 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
2
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
1 Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.40 Lbs. (0.182 kg)
Coil Weight 0.42 Lbs. (0.190 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Performance
Coil Material Class N high temperature magnet wire,
Measured at 158 SUS (34 cSt) steel shell, polyamid encapsulation.
bar psi T Oil = 115oF (46oC) Seal Kits Buna-N FS102-N P/N: 03033872
12
Viton® FS102-V P/N: 03051757
10 150 2 1 De-energized
1 2 Energized
Pressure Drop
8
100
6
4
50
2
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70 80
Flow
Seals
N = Buna-N
(73.5 Max.)
V = Viton®
2.9 Max.
Coil Voltage
0 = No coil, cartridge only
(73 Max.)
DC 12 = 12 VDC
1” HEX
24 = 24 VDC
Torque 28-33 ft-lbs
36 = 36 VDC
(Torque 38-45 Nm)
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
(18.8)
0.74
230 = 230 VAC
Coil Connector
1.50
0.28
(7.1)
(38)
DC DG = EN 175301-803-A
2 DS = Dual spade (SAEJ858a)*
2.13
(55)
2.13
(55)
ø1.43
(ø36.3)
0.95
(24)
2.74 Max.
(73 Max.)
0.47
(12)
0.80
(2)
1.30
(33)
1
ø0.63
(ø15.88) 7/8-14UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lbs
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lbs
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS12YR allows flow from port 2 to port 1 and from
port 1 to port 2. When energized the valve’s poppet closes on its seat, blocking
1 flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (22 to 94 psi (1.5 to 6.5 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 29 gpm (110 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 90 ms
De-energized 25 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
2 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC12-2 (see Line Bodies & Cavities section)
1 Cavity Tools Rougher: 02580667
Finisher: 02580668
Cartridge Weight 0.60 Lbs. (0.27 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Performance Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Measured at 158 SUS (34 cSt)
bar psi Toil = 115o F (46o C) Buna N or Viton® o-rings.
PTFE back-up rings.
180
12
2 1 De-energized
Coil Material Class N high temperature magnet wire,
150 1 2 De-energized steel shell, polyamid encapsulation.
10
Seal Kits Buna-N FS122-N P/N: 03071298
Pressure Drop
8
120 Viton® FS122-V P/N: 03071299
6 90
4 60
2 30
0 0 gpm
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
Flow
C = Cartridge only
AS12 = SAE-12 Ports, aluminum body
SS12 = SAE-12 Ports, steel body
Seals
N = Buna-N
2.95 Max.
(75 Max.)
(73 Max.)
V = Viton®
1 1/4” HEX
Torque 74-80 ft-lbs Coil Voltage
(Torque 100-108 Nm) 0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(26.55)
1.05
AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(57.2)
2.25
DC DG = EN 175301-803-A
0.34
(8.6)
ø1.43
(ø36.3)
0.94
(23.8)
2.92 Max.
(74 Max.)
0.51
(13)
0.08
(2)
1.81
(46)
1
ø0.88
1 1/16-12UN-2A (ø22.23) Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 1.39 lbs
FH122-AS12 03053845
anodized (245 bar) (0.63 kg)
Steel, 6000 psi 4.16 lbs
FH122-SS12 03053772
Zinc plated (420 bar) (1.89 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS16YR allows flow from port 2 to port 1 and from
port 1 to port 2. When energized the valve’s poppet closes on its seat, blocking
1 flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (15 to 45 psi (1to 3 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm at 4060 psi (150 l/min at 280 bar)
26 gpm at 5000 psi (100 l/min at 350 bar)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 150 ms
De-energized 35 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
2 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580250
Finisher: 02580251
Cartridge Weight 1.37 Lbs. (0.62 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Performance Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi
Toil = 115°F (46°C)
12 Coil Material Class N high temperature magnet wire,
150
steel shell, polyamid encapsulation.
10 2 1 De-energized
1 2 De-energized Seal Kits Buna-N FS162-N P/N: 03052427
Viton® FS162-V P/N: 03051758
Pressure Drop
8
100
6
4
50
0 0 gpm
0 5 10 15 20 25 30 35 40
l/min
0 20 40 60 80 100 120 140 160
Flow
C = Cartridge only
AS16 = SAE-16 Ports, aluminum body
SS16 = SAE-16 Ports, steel body
Seals
(80.8 Max.)
3.18 Max.
N = Buna-N
(78.5 Max.)
(25.13)
0.99
AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(57.2)
2.25
DC DG = EN 175301-803-A
(75)
3.0
ø1.43
(ø36.3) 0.94
(23.8)
3.11 Max.
(79 Max.)
0.71
(18)
0.08
(2)
(46.5)
1.83
1
ø1.13
(ø28.5) 1 5/16-12UN-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 1.2 lbs
FH162-AS16 03037195
anodized (245 bar) (0.55 kg)
Steel, 6000 psi 3.56 lbs
FH162-SS16 03032655
Zinc plated (420 bar) (1.62 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08YR allows flow from port 2 to port 1 and from
port 1 to port 2. When energized the valve’s poppet closes on its seat, blocking
1 flow from port 2 to port 1. Flow from port 1 to port 2 is allowed when hydraulic
pressure generated force (130 to 290 psi (9 to 20 bar)) overcomes solenoid force.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Filter screen on the inlet port for protection from contamination
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized: 50ms
De-Energized: 35ms
Fluid Compatibility Mineral-Based or Synthetics with
2 lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Filter screen 300 µm mesh
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies and Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Coil Weight 0.42 Lbs. (0.19 kg
Cartridge Material Steel with hardened work surfaces.
Performance Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
psi
bar Toil = 115o F (46o C)
8 Coil Material Class N high temperature magnet wire,
100
steel shell, polyamid encapsulation.
2 1 De-energized
Seal Kits Buna-N FS082-N P/N: 03033920
Pressure Drop
4
50
2 25
0 0 gpm
0 2 4 6 8
0 10 20 30 l/min
Flow
(69.5 Max.)
2.8 Max.
V = Viton®
Coil Voltage
0 = No coil, cartridge only
7/8” HEX
DC 12 = 12 VDC
Torque 18.5-22 ft-lbs
24 = 24 VDC
(Torque 25-30 Nm)
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(15.5)
2
0.61
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
Coil Connector
1.50
(38)
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3) 0.94
(23.8)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
(28)
1.1
1
ø0.5
(ø12.7) Standard Line Bodies*
3/4-16UNF-2A
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS06Z blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts and opens the flow
1 from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 3.5 gpm (13.3 l/min)
Internal Leakage Leaktight, less than 5 drops/min.
at 5000 psi (350 bar)
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Minimum Pull-in Current 70% of nominal amperage
to Operate Valve
Typical Response Time Energized: 35ms
(Varies with Pressure and Flow) De-Energized: 50ms
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
Cartridge Weight 2.7 oz (75 grams)
Coil Weight 3.1 oz (88 grams)
2
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
1
Coil Material Class N, 200°C high temperature magnet wire.
steel shell, polyester encapsulation.
Seal Kits Buna-N FS062-N P/N: 02610184
Viton® FS062-V P/N: 02610185
Performance
Measured at 135 SUS (28 cSt)
bar psi
Toil = 100° F (38° C)
400
25
300
20
2 1 Energized
Pressure Drop
1 2 De-energized
15
200
10
100
5
gpm
0 0
0 1 2 3 4 5
l/min
0 5 10 15
Flow
C = Cartridge only
AS4 = SAE-4 Ports, aluminum body
SS4 = SAE-4 Ports, steel body
Seals
11/16” HEX N = Buna-N
Torque 12-15 ft-lbs V = Viton®
(Torque 16-20 Nm) Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
0.55
(14)
24 = 24 VDC
AC 115 = 105 VDC (only available with connector DG)
2 230 = 205 VDC (only available with connector DG)
(38.1)
(All model 32-1329 coils are DC. AC models require an external diode bridge
1.5
(50.8)
2.0
ø1.13
(ø28.7)
1.33
(33.8)
(49.5) Max
1.95 Max
0.36
(9.1)
0.04
(1.0)
(21.3)
0.84
1
ø0.47
(ø11.9)
9/16-18 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
ø0.69 Rating
(ø17.9) Aluminum, 3500 psi 0.33 lbs
FH062-AS4 02600491
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 0.97 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.44 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08Z blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts and opens the flow
1 from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.
If this flow path is required see model WS08ZR.
Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
1 2
(De-energized)
2 1
5 75 (Energized)
50
2.5
25
0 0 gpm
0 2 4 6 8 10
l/min
0 10 20 30 38
Flow
Seals
(56.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
2
(15.5)
AC 24 = 24 VAC
0.61
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
1.50
(38)
Coil Connector
0.28
(7.1)
(50)
DC DG = EN 175301-803-A
2.0
ø1.43
(ø36.3)
0.95
(24)
(57.5 Max.)
2.26 Max.
0.37
(9.5)
0.08
(2)
(28)
2
1.1
1
ø0.5
(ø12.7) 3/4-16 UNF-2A
Operation
When de-energized the WS10Z blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts and opens the flow
1 from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.
If this flow path is required see model WS10ZR.
Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 20 gpm (75 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 30 ms
De-energized 60 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
2 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
1 Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.40 Lbs. (0.182 kg)
Coil Weight 0.42 Lbs. (0.190 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Measured at 158 SUS (34 cSt) Coil Material Class N high temperature magnet wire,
bar psi TOil = 115°F (46°C) steel shell, polyamid encapsulation.
12 Seal Kits Buna-N FS102-N P/N: 03033872
150
1 2 Viton® FS102-V P/N: 03051757
10 (De-energized)
2 1
Pressure Drop
(Energized)
8
100
6
4
50
2
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70 80
Flow
Seals
N = Buna-N
V = Viton®
Coil Voltage
(59 Max.)
(18.8)
115 = 115 VAC (AC coils internally full wave rectified)
2
0.74
230 = 230 VAC
Coil Connector
1.50
(38)
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3) 0.95
(24)
2.36
(60)
0.47
(12)
0.08
(2)
1.30
(33)
1
ø0.63
(ø15.88)
7/8-14 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lbs
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lbs
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS12Z blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts and opens the flow
1 from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.
If this flow path is required see model WS12ZR.
Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 29 gpm (110 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 30 ms
De-energized 70 ms
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
1 Installation No orientation restrictions
Cavity FC12-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580667
Finisher: 02580668
Cartridge Weight 0.60 Lbs. (0.27 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
PTFE back-up rings.
Measured at 158 SUS (34 cSt)
bar psi Toil = 115o F (46o C) Coil Material Class N high temperature magnet wire,
180 steel shell, polyamid encapsulation.
12
2 1 Seal Kits Buna-N FS122-N P/N: 03071298
(Energized)
10
150
1 2 Viton® FS122-V P/N: 03071299
Pressure Drop
(De-energized)
120
8
6 90
4 60
2 30
0 0 gpm
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
Flow
C = Cartridge only
AS12 = SAE-12 Ports, aluminum body
SS12 = SAE-12 Ports, steel body
Seals
(60.5 Max.)
N = Buna-N
1 1/4” HEX V = Viton®
Torque 74-80 ft-lbs
(Torque 100-108 Nm) Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
(26.55)
24 = 24 VDC
1.05
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(57.2)
2.25
AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(75)
Coil connector
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
2.0 Thick DL = Leadwires (2) - 18” long (46 cm)*
(50.8) DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
1 DT = Amp Junior Timer™, molded, radial mount*
0.20 2.56
(5.0) (65) AC AG = EN 175301-803-A
3.0 Coil Model 40-1836
(75) For other coil connector types consult factory
*Coils with internal diode are available, consult factory.
ø1.43
(ø36.3)
0.94
(23.8)
(61.5 Max.)
2.42 Max.
0.51
(13)
0.08
(2)
1.81
(46)
1
ø0.88
(ø22.23)
1 1/16-12UN-2A
Operation
When de-energized the WS16Z blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts and opens the flow
1 from port 2 to port 1, while the flow from port 1 to port 2 is severely restricted.
If this flow path is required see model WS16ZR.
Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm at 4060 psi (150 l/min at 280 bar)
26 gpm at 5000 psi (100 l/min at 350 bar)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 30 ms
De-energized 70 ms
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580250
Finisher: 02580251
Cartridge Weight 1.37 Lbs. (0.62 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Performance Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi
Toil = 115o F (46o C)
12 Coil Material Class N high temperature magnet wire,
1 2 steel shell, polyamid encapsulation.
10 150 (De-energized)
Seal Kits Buna-N FS162-N P/N: 03052427
Pressure Drop
2 1
(Energized) Viton® FS162-V P/N: 03051758
8
100
6
4
50
2
0 0 gpm
0 5 10 15 20 25 30 35 40
l/min
0 20 40 60 80 100 120 140 160
Flow
Seals
N = Buna-N
(65.5 Max.)
V = Viton®
1 1/2” HEX Coil Voltage
Torque 96-133 ft-lbs 0 = No coil, cartridge only
(Torque 130-180 Nm) DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(25.13)
0.99
2 AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
(57.2)
2.25
Coil Connector
DC DG = EN 175301-803-A
(75)
3.0
0.34
(8.6)
ø1.43
(ø36.3) 0.94
(23.8)
2.60
(66)
0.71
(18)
0.08
(2)
(46.5)
1.83
1
ø1.13
(ø28.5)
1 5/16-12UN-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 1.2 lbs
FH162-AS16 03037195
anodized (245 bar) (0.55 kg)
Steel, 6000 psi 3.56 lbs
FH162-SS16 03032655
Zinc plated (420 bar) (1.62 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
1 When de-energized the WS08Z-01J blocks flow from port 2 to port 1, while
allowing flow from port 1 to port 2. When energized the poppet lifts and opens
the flow from port 2 to port 1, while the flow from port 1 to port 2 is severely
restricted. If this flow path is required see model WS08ZR-01J.
Operation of Manual Override Option: To manually override pull and hold the
override stem. This override is not detented. The override stem has a male thread
M8X1.25 and hole for a cable attachment. If a cable is used, the internal spring
may not provide enough force to overcome internal cable friction. An external
means of returning the cable must be provided by the user. The manual override
option is intended for emergency use, not for continuous duty operation.
Features
• Rugged manual override design with thread and hole for a handle
or cable attachment
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Manual Override Pull Force 38 - 40.5 bs (150 - 180 N)
Max. permissible pull force
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Performance Cartridge Weight 0.31 Lbs. (0.14 kg)
Measured at 158 SUS (34 cSt) Coil Weight 0.42 Lbs. (0.19 kg)
bar psi Toil = 115o F (46o C) Cartridge Material Steel with hardened work surfaces.
125
Zinc-plated exposed surfaces.
7.5 Buna N or Viton® o-rings.
100
Pressure Drop
1 2
(De-energized) PTFE back-up rings.
75
2
(Energized)
1 Coil Material Class N high temperature magnet wire,
5 steel shell, polyamid encapsulation.
50 Seal Kits Buna-N FS082-N P/N: 03033920
2.5 Viton® FS082-V P/N: 03051756
25
0 0 gpm
0 2 4 6 8 10
l/min
0 10 20 30 38
Flow
1.14
(Ordered separately)
(29)
Body & Ports
Manual Override, Spring Return C = Cartridge only
(External means of returning AS6 = SAE-6 Ports, aluminum body
cable must be provided by user)
SS6 = SAE-6 Ports, steel body
Torque 3-4.5 ft-lbs
Seals
(Torque 4 Nm)
N = Buna-N
V = Viton®
2.62 Max. (without M Option)
Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(66.5 Max.)
7/8” HEX 110 = 110 VDC (only available with connector DG)
Torque 18.5-22 ft-lbs AC 24 = 24 VAC
(Torque 25-30 Nm) 115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
Coil Connector
2
(15.5)
0.61
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
1.50
(38)
ø1.43
0.63 (ø36.3)
(16)
0.31
M8 x 1.25
(8)
ø0.2 Through
0.16
(ø5 Through)
(4)
0.94
(23.8)
(96.5 Max.)
3.8 Max.
(67.5 Max.)
2.66 Max.
0.37
(9.5)
(80.8)
3.18
0.08
(2.0)
(1.1)
28
ø0.5
(ø12.7) 3/4-16UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08Z-30 blocks flow from port 2 to port 1, while
allowing flow from port 1 to port 2. When energized the poppet lifts and opens
the flow from port 2 to port 1, while the flow from port 1 to port 2 is severely
restricted. If this flow path is required see model WS08ZR.
1 Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Filter screen on the inlet port for protection from contamination
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to +60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Filter screen 300 µm mesh
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Performance Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Measured at 158 SUS (33 cSt)
Buna N or Viton® o-rings.
bar psi Toil = 115o F (46o C)
125 PTFE back-up rings.
8 Coil Material Class N high temperature magnet wire,
100 steel shell, polyamid encapsulation.
Pressure Drop
1 2
(De-energized)
6 Seal Kits Buna-N FS082-N P/N: 03033920
2 1
75 (Energized) Viton® FS082-V P/N: 03051756
4
50
2 25
0 0 gpm
0 2 4 6 8
l/min
0 5 10 15 20 25 30
Flow
Seals
(56.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
0 = No coil, cartridge only
7/8” HEX
DC 12 = 12 VDC
Torque 18.5-22 ft-lbs
24 = 24 VDC
(Torque 25-30 Nm)
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(15.5)
115 = 115 VAC (AC coils internally full wave rectified)
0.61
2 230 = 230 VAC
Coil Connector
DC DG = EN 175301-803-A
1.50
(38)
ø1.43
(ø36.3)
0.95
(24)
(57.5)
2.26
0.37
(9.5)
0.08
(2.0) (28)
1.1
ø0.5
1
(ø12.7)
3/4-16 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08ZR blocks flow from port 2 to port 1, while allowing
1 flow from port 1 to port 2. When energized the poppet lifts allowing bi-directional
flow between port 1 and port 2.
Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
2
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
1 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi Toil = 115o F (46o C) Coil Material Class N high temperature magnet wire,
125
steel shell, polyamid encapsulation.
7.5 (De-energized)
1 2 Seal Kits Buna-N FS082-N P/N: 03033920
100
1 2
Viton® FS082-V P/N: 03051756
Pressure Drop
(Energized)
5 75 2 1
(Energized)
50
2.5
25
gpm
0 0
2 4 6 8 10
0 10 20 30 38 l/min
Flow
Seals
(56.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
2
(15.5)
AC 24 = 24 VAC
0.61
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
1.50
(38)
Coil Connector
0.28
(7.1)
(50)
DC DG = EN 175301-803-A
2.0
ø1.43
(ø36.3)
0.95
(24)
(57.5 Max.)
2.26 Max.
0.37
(9.5)
0.08
(2)
(28)
2
1.1
1
ø0.5
(ø12.7) 3/4-16 UNF-2A
Operation
When de-energized the WS10ZR blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts allowing bi-directional
1 flow between port 1 and port 2.
Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 20 gpm (75 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 60 ms
Fluid Compatibility Mineral-based or synthetics with
2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
1 Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.40 Lbs. (0.18 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Performance PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
Measured at 158 SUS (34 cSt)
bar steel shell, polyamid encapsulation.
psi TOil = 115o F (46o C)
12 Seal Kits Buna-N FS102-N P/N: 03033872
150 Viton® FS102-V P/N: 03051757
10 1 2 De-energized
Pressure Drop
2 1 De-energized
1 2 Energized
8
100
6
4
50
2
0 0 gpm
0 5 10 15 20
l/min
0 10 20 30 40 50 60 70 80
Flow
Seals
N = Buna-N
V = Viton®
Coil Voltage
(59 Max.)
(18.8)
115 = 115 VAC
2
0.74
(AC coils internally full wave rectified)
230 = 230 VAC
Coil Connector
1.50
(38)
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3) 0.95
(24)
2.36
(60)
0.47
(12)
0.08
(2)
1.30
(33)
1
ø0.63
(ø15.88)
7/8-14 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lbs
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lbs
FH102-SS6 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS12ZR blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts, allowing bi-directional
1 flow between port 1 and port 2.
Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 29 gpm (110 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 70 ms
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
1 Installation No orientation restrictions
Cavity FC12-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580667
Finisher: 02580668
Cartridge Weight 0.60 Lbs. (0.27 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Performance Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi Toil = 115o F (46o C) Coil Material Class N high temperature magnet wire,
180 steel shell, polyamid encapsulation.
12
2 1 Seal Kits Buna-N FS122-N P/N: 03071298
150 1 2 (De-energized) Viton® FS122-V P/N: 03071299
10
1 2 (Energized)
Pressure Drop
120
8
6 90
4 60
2 30
0 0 gpm
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
Flow
C = Cartridge only
AS12 = SAE-12 Ports, aluminum body
SS12 = SAE-12 Ports, steel body
Seals
(60.5 Max.)
N = Buna-N
1 1/4” HEX V = Viton®
Torque 74-80 ft-lbs
(Torque 100-108 Nm) Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
(26.55)
24 = 24 VDC
1.05
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(57.2)
2.25
AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
(75)
Coil connector
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
2.0 Thick DL = Leadwires (2) - 18” long (46 cm)*
(50.8) DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
1 DT = Amp Junior Timer™, molded, radial mount*
0.20 2.56
(5.0) (65) AC AG = EN 175301-803-A
3.0 Coil Model 40-1836
(75) For other coil connector types consult factory
*Coils with internal diode are available, consult factory.
ø1.43
(ø36.3)
0.94
(23.8)
(61.5 Max.)
2.42 Max.
0.51
(13)
0.08
(2)
1.81
(46)
1
ø0.88
(ø22.23)
1 1/16-12UN-2A
Operation
When de-energized the WS16ZR blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts, allowing bi-directional
1 flow between port 1 and port 2.
Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 40 gpm at 4060 psi (150 l/min at 280 bar)
26 gpm at 5000 psi (100 l/min at 350 bar)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 70 ms
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580250
Finisher: 02580251
Cartridge Weight 1.37 Lbs. (0.62 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Performance Zinc-plated exposed surfaces.
Measured at 158 SUS (34 cSt) Buna N or Viton® o-rings.
bar psi o o
Toil = 115 F (46 C) PTFE back-up rings.
12
Coil Material Class N high temperature magnet wire,
2 1 (Energized)
steel shell, polyamid encapsulation.
10 150 1 2 (Energized)
1 2 Seal Kits Buna-N FS162-N P/N: 03052427
Pressure Drop
(De-energized)
8 Viton® FS162-V P/N: 03051758
100
6
4
50
0 0 gpm
0 5 10 15 20 25 30 35 40
l/min
0 20 40 60 80 100 120 140 160
Flow
Seals
N = Buna-N
(65.5 Max.)
V = Viton®
1 1/2” HEX Coil Voltage
Torque 96-133 ft-lbs 0 = No coil, cartridge only
(Torque 130-180 Nm) DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(25.13)
0.99
2 AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
(57.2)
2.25
Coil Connector
DC DG = EN 175301-803-A
(75)
3.0
0.34
(8.6)
ø1.43
(ø36.3) 0.94
(23.8)
2.60
(66)
0.71
(18)
0.08
(2)
(46.5)
1.83
1
ø1.13
(ø28.5)
1 5/16-12UN-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 1.2 lbs
FH162-AS16 03037195
anodized (245 bar) (0.55 kg)
Steel, 6000 psi 3.56 lbs
FH162-SS16 03032655
Zinc plated (420 bar) (1.62 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08ZR-01J blocks flow from port 2 to port 1, while
allowing flow from port 1 to port 2. When energized the poppet lifts, allowing
1 bi-directional flow between port 1 and port 2.
Operation of Manual Override Option: To manually override pull and hold the
override stem. This override is not detented. The override stem has a male thread
M8X1.25 and hole for a cable attachment. If a cable is used, the internal spring
may not provide enough force to overcome internal cable friction. An external
means of returning the cable must be provided by the user. The manual override
option is intended for emergency use, not for continuous duty operation.
Features
• Rugged manual override design with thread and hole for a handle or cable
attachment.
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10 gpm (38 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Manual Override Pull Force 38 - 40.5 bs (150 - 180 N)
Max. permissible pull force
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Performance Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Measured at 158 SUS (34 cSt) Zinc-plated exposed surfaces.
bar psi o o
Toil = 115 F (46 C) Buna N or Viton® o-rings.
125
PTFE back-up rings.
7.5 1 2
100
(De-energized) Coil Material Class N high temperature magnet wire,
1 2 steel shell, polyamid encapsulation.
Pressure Drop
(Energized)
2.5
25
gpm
0 0
2 4 6 8 10
0 10 20 30 38 l/min
Flow
1.14
(29)
(Ordered separately) spring return
Manual Override, Spring Return Body & Ports
(External means of returning cable C = Cartridge only
must be provided by user) AS6 = SAE-6 Ports, aluminum body
Torque 3-4.5 ft-lbs SS6 = SAE-6 Ports, steel body
(Torque 4 Nm) Seals
N = Buna-N
2.62 Max. (without M option)
V = Viton®
Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
(66.5 Max.)
DC DG = EN 175301-803-A
1.50
(38)
ø1.43
0.63 (ø36.3)
(16)
0.31
(8)
M8
ø0.2 Through
0.16
(ø5 Through)
(4)
0.94
(23.8)
(96.5 Max.)
3.8 Max.
(67.5 Max.)
2.66 Max.
(80.8)
3.18
0.37
(9.5)
0.08
(2)
(1.1)
28
ø0.5
(ø12.7) 3/4-16UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08ZR blocks flow from port 2 to port 1, while allowing
flow from port 1 to port 2. When energized the poppet lifts allowing bi-directional
flow between port 1 and port 2.
1 Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Filter screen on the inlet port for protection from contamination
• Screw type manual override option
• Free reverse flow
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8 gpm (30 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to +60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
2 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
1 Use with filter rated ß10 ≥ 200.
Filter screen 300 µm mesh
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Performance Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Measured at 158 SUS (33 cSt)
Buna N or Viton® o-rings.
bar psi Toil = 115o F (46o C)
125 PTFE back-up rings.
8 Coil Material Class N high temperature magnet wire,
100 steel shell, polyamid encapsulation.
Pressure Drop
1 2
(De-energized)
6
2 1
Seal Kits Buna-N FS082-N P/N: 03033920
75 (Energized) Viton® FS082-V P/N: 03051756
4
50
2 25
0 0 gpm
0 2 4 6 8
l/min
0 5 10 15 20 25 30
Flow
Seals
(56.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
0 = No coil, cartridge only
7/8” HEX
DC 12 = 12 VDC
Torque 18.5-22 ft-lbs
24 = 24 VDC
(Torque 25-30 Nm)
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(15.5)
115 = 115 VAC (AC coils internally full wave rectified)
0.61
2 230 = 230 VAC
Coil Connector
DC DG = EN 175301-803-A
1.50
(38)
ø1.43
(ø36.3)
0.95
(24)
(57.5)
2.26
0.37
(9.5)
0.08
(2.0) (28)
1.1
ø0.5
1
(ø12.7)
3/4-16 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08V allows flow in both directions. When energized
the poppet closes and oblocks the flow from port 2 to port 1 and from port 1
1 to port 2.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage Leaktight, less than 2 drops/min. at 3600 psi
(0.10 cc/min at 250 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
2 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
1 Cartridge Weight 0.31 Lbs. (0.14 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Performance Seal Kits Buna-N FS082-N P/N: 03033920
Measured at 158 SUS (34 cSt) Viton® FS082-V P/N: 03051756
bar psi
Toil = 115o F (46o C)
200
12.5
175 1 2 Energized
10 150 2 1 Energized
Pressure Drop
125
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5
0 5 10 15 19 l/min
Flow
N = Buna-N
2.95 Max.
(75) Max.
V = Viton®
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(15.5)
0.61
2 115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
1.50
(38)
Coil Connector
0.28
(7.1)
DC DG = EN 175301-803-A
(50)
2.0
ø1.43
(ø36.3)
0.95
(24)
(73.5 Max.)
2.89 Max.
(12.5)
0.49
0.10
(2.5)
ø0.5
1
(ø12.7)
3/4-16 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08W blocks flow , leakfree, in both directions. When
energized the poppet lifts and opens the flow from port 2 to port 1 and from port
1 1 to port 2.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• One piece cartridge body design to maximize reliability
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 3600 psi (250 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage Leaktight, less than 2 drops/min. at 3600 psi
(0.10 cc/min at 250 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
2 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
1 Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Performance Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Measured at 158 SUS (34 cSt) Seal Kits Buna-N FS082-N P/N: 03033920
bar psi
Toil = 115o F (46o C) Viton® FS082-V P/N: 03051756
200
12.5
175 1 2 Energized
10 150 2 1 Energized
Pressure Drop
125
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5
0 5 10 15 19 l/min
Flow
C = Cartridge only
AS6 = SAE-6 Ports, aluminum body
SS6 = SAE-6 Ports, steel body
Seals
(71) Max.
2.8 Max.
(69.5) Max.
N = Buna-N
V = Viton®
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(15.5)
0.61
2 115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
Coil Connector
1.50
(38)
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
(28)
1.1
1
ø0.5
(ø12.7) 3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS10W blocks flow , leakfree, in both directions. When
energized the poppet lifts and opens the flow from port 2 to port 1 and from port
1 1 to port 2.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• One piece cartridge body design to maximize reliability
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 10.5 gpm (40 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 5000 psi
(0.25 cc/min at 350 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
2 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
1 Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.40 Lbs. (0.18 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Performance Coil Material Class N high temperature magnet wire,
Measured at 158 SUS (34 cSt) steel shell, polyamid encapsulation.
bar psi Toil = 115°F (46°C) Seal Kits Buna-N FS102-N P/N: 03033872
15
Viton® FS102-V P/N: 03051757
1 2 Energized
200
2 1 Energized
Pressure Drop
10 150
100
5
50
0 0 gpm
0 2 4 6 8 10
l/min
0 10 20 30 40
Flow
C = Cartridge only
AS8 = SAE-8 Ports, aluminum body
SS8 = SAE-8 Ports, steel body
(84.8) Max.
3.34 Max.
Seals
N = Buna-N
(82.5) Max.
V = Viton®
Coil Voltage
1” HEX 0 = No coil, cartridge only
Torque 28-33 ft-lbs DC 12 = 12 VDC
(Torque 38-45 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(18.8)
2
0.74
115 = 115 VAC (AC coils internally full wave rectified)
(38.1)
Coil Connector
0.28
(7.1)
DC DG = EN 175301-803-A
2.13
(55)
ø1.43
(ø36.3)
0.95
(24)
3.27 Max.
(83 Max.)
0.47
(12)
0.08
(2)
(33)
1.3
1
ø0.63
(ø15.88)
7/8-14UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lbs
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lbs
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08W blocks flow , leakfree, in both directions. When
energized the poppet lifts and opens the flow from port 2 to port 1 and from port
1 to port 2.
Operation of Manual Override Option: To override, push and hold the override
1 button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Filter screen on port 2 for protection from contamination getting inside
the cartridge
• One piece cartridge body design to maximize reliability
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 3600 psi (250 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage Leaktight, less than 2 drops/min. at 3600 psi
(0.10 cc/min at 250 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to +60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 50 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
2 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Filter screen 300 µm mesh
1 Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.31 Lbs. (0.14 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Performance Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
Measured at 158 SUS (34 cSt) PTFE back-up rings.
bar psi
Toil = 115o F (46o C)
200 Coil Material Class N high temperature magnet wire,
12.5
175 steel shell, polyamid encapsulation.
1 2 Energized
2 1 Energized Seal Kits Buna-N FS082-N P/N: 03033920
10 150
Pressure Drop
Seals
2.8 Max.
N = Buna-N
V = Viton®
(69.5) Max.
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(15.5)
2
0.61
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
1.50
Coil Connector
(38)
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
(28)
1.1
1
ø0.5
(ø12.7)
3/4-16 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WS08W-51 blocks flow, leakfree at port 3 and allows flow
from port 1 to port 2. When energized, flow is blocked at port 1 and allowed from
1 3 port 2 to port 3.
Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 4000 psi (280 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 4000 psi
(0.25 cc/min at 280 bar)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Response Time (typical) Energized 35 ms
De-energized 45 ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
3 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
2 Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580086
Finisher: 02580087
1
Cartridge Weight 0.87 Lbs. (0.39 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
Performance steel shell, polyamid encapsulation.
Measured at 158 SUS (34 cSt)
Seal Kits Buna-N FS083-N P/N: 03054795
bar psi Toil = 115°F (46°C) Viton® FS082-V P/N: 02591059
400
25 1 2
2 3
300
Pressure Drop
20
15
200
10
100
5
0 0 gpm
0 1 2 3 4 5
5 10 l/min
0 15 20
Flow Rate
(15.2)
36 = 36 VDC
0.6
110 = 110 VDC (only available with connector DG)
1.18
(30)
AC 24 = 24 VAC
2 3 115 = 115 VAC (AC coils internally full wave rectified)
(53.8)
Coil Connector
DC DG = EN 175301-803-A
(66.5)
26.2
0.28
(7.1)
ø1.43
(ø 36.3)
0.95
(24)
Operating Limits
Measured at 158 SUS (34 cSt)
bar psi
Toil = 115°F (46°C)
(77.8 Max.)
3.06 Max.
400
3000
200
2000
0.08
(2.0)
100
1000
0 0 gpm
0 1 2 3 4 5
3 0 5 10
Flow
15 20
l/min
1.61
(41)
1 ø0.56
(ø14.27)
ø0.63
(ø15.88) Standard Line Bodies*
3/4-16 UNF-2A Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.58 lbs
FH083-AS6 03011424
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.7 lbs
FH082-SS6 00560920
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm). *Please refer to Line Bodies & Cavities section for details
Subject to technical modifications Note: Orifice plug not permitted at port 1
Operation
When de-energized the WK06V allows bi-directional flow. When energized the
spool shifts and blocks flow in both directions.
Operation of Manual Override Option: To override, push and hold the override
1 button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow See Operating Limits
Internal Leakage 5.5 cu in/min at 3600 psi and 135 SUS
(90cc/min at 248 bar at 28cSt)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current to 80% of nominal amperage
Operate Valve
Typical Response Time Energized 50ms
(Varies with Pressure and Flow) De-energized 35ms
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
2 Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
Cartridge Weight 0.17 lb (0.08 kg)
1 Coil Weight 0.19 lb (0.09 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation.
Seal Kits Buna-N FS062-N P/N: 02610184
Performance Viton® FS062-V P/N: 02610185
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
14 200
12 2 1
150
1 2
10
Pressure Drop
8
100
6
4
50
2
0 0 gpm
0 1 2 3 4
l/min
0 2 4 6 8 10 12 14
Flow
ø1.13
(ø28.7) 1.33
(33.8)
Operating Limits
@ 70% current Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
5000
300
(58.4) Max.
2.30 Max.
4000
Pressure Drop
1 2
200 3000 2 1
2000
100
1000
0.36
(9.1)
0 0 gpm
0 1 2 3 4
l/min
0 2 4 6 8 10 12 14
0.04
(1)
Flow
(21.3)
0.84
1
ø0.47
(ø11.9) 9/16-18 UNF-2A
ø0.69
(ø17.5) Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH062-AS4 02600491
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH062-SS4 02600490
zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK08V allows bi-directional flow. When energized the
spool shifts and blocks flow in both directions.
Operation of Manual Override Option: To override, push and hold the override
1 button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage 5.5 cu in/min. at 3000 psi and 158 SUS
(90 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
2 Finisher: 02580091
Cartridge Weight 0.38 Lbs. (0.17 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
1 Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS082-N P/N: 03033920
Viton® FS082-V P/N: 03051756
Performance
Measured at 158 SUS (34 cSt)
psi
bar Toil = 115°F (46°C)
200
12.5 1 2
10 150
Pressure Drop
100
5
50
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
Seals
(73 Max.)
N = Buna-N
V = Viton®
(69.5 Max.)
Coil Voltage
7/8” HEX 0 = No coil, cartridge only
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
2 115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
1.50
(38)
Coil Connector
0.28
(7.1)
(15.5)
(50)
0.61
2.0
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
1.13 Thick DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
(30) DT = Amp Junior Timer™, molded, radial mount*
1 AC AG = EN 175301-803-A
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2.0)
1.10
(28)
1
ø0.50
(ø12.7)
3/4-16 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10V allows bi-directional flow . When energized the
spool shifts and blocks flow in both directions.
Operation of Manual Override Option: To override, push and hold the override
1 button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 9 gpm (35 l/min)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
2 Finisher: 02580247
Cartridge Weight 0.48 Lbs. (0.22 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
1 Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS102-N P/N: 03033872
Viton® FS102-V P/N: 03051757
Performance
Measured at 158 SUS (34 cSt)
bar psi
T Oil = 115°F (46°C)
7.5
100
1 2
75 2 1
5
Pressure Drop
50
2.5
25
0 0 gpm
0 2 4 6 8 10
l/min
0 5 10 15 20 25 30 35 40
Flow Rate
C = Cartridge only
AS8 = SAE-8 Ports, aluminum body
SS8 = SAE-8 Ports, steel body
(83.8 Max.)
3.30 Max.
Seals
N = Buna-N
(81.5 Max.)
V = Viton®
Coil Voltage
1” HEX 0 = No coil, cartridge only
Torque 28-33 ft-lbs DC 12 = 12 VDC
(Torque 38-45 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
(18.8)
0.74
115 = 115 VAC (AC coils internally full wave rectified)
2 230 = 230 VAC
(38.1)
1.5
Coil Connector
0.28
(7.1)
DC DG = EN 175301-803-A
2.13
(55)
ø1.43
(ø36.3) 0.95
(24)
3.23
(82)
0.43
(11)
0.08
(2) (33)
1.3
1 ø0.63
(ø15.88)
7/8-14 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lbs
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lbs
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK06W blocks flow in both directions. When
energized the spool shifts and opens the bidirectional flow path.
1
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 2.5 gpm (9.5 l/min)
Internal Leakage 5.5 cu in/min. at 3000 psi and 135 SUS
(90 cc/min at 207 bar and 28 cSt)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current to 70% of nominal amperage
Operate Valve
Fluid Compatibility Mineral-Based or Synthetics
with lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582046
Finisher: 02582047
Cartridge Weight 2.7 oz (75 grams)
Coil Weight 3.1 oz (88 grams)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
2 Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation
Seal Kits Buna-N FS062-N P/N: 02610184
1 Viton® FS062-V P/N: 02610185
Performance
Measured at 135 SUS (28 cSt)
bar psi
Toil = 100°F (38°C)
14 200
12
150 2 1
10
Pressure Drop
1 2
8
100
6
4
50
2
gpm
0 0
0 1 2 3 4
l/min
0 5 10 15
Flow
C = Cartridge only
AS4 = SAE-4 Ports, aluminum body
11/16” HEX Torque SS4 = SAE-4 Ports, steel body
12-15 ft-lbs Seals
(Torque 16-20 Nm) N = Buna-N
V = Viton®
Coil Voltage
0 = No coil, cartridge only
0.55
(14)
DC 12 = 12 VDC
24 = 24 VDC
(50.8)
(38.1)
1.5
230 = 205 VDC (only available with connector DG)
0.28
(7.1)
(All model 32-1329 coils are DC. AC models require an external diode bridge
mounted outside the coil)**
Coil Connector
DG = EN 175301-803-B (IP65 Rated)**
DC DL = Leadwires (2) - 18” long (46 cm) AWG18, TYPE UL 1815
(IP69K Rated)*
1 1.0 Thick DN = Deutsch DT04-2P intergral molded (IP69K Rated)*
(25.4) Use mating plug EN 175301-803-B without diode bridge for
0.25 1.5 DC voltages P/N 02600570
(6.4) (38.1) Use mating plug EN 175301-803-B w/diode bridge for
2.0 AC voltages P/N 02600582
(50.8) Coil Model 32-1329
For other coil connector types consult factory
ø1.13 ** Mating Plugs sold separately
(ø28.7) *Coils with internal transient suppression diode are available, consult factory.
1.33
(33.8)
Operating Limits
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
350 5000
300
4000
250
Pressure
(58.4) Max
3000
2.3 Max
200
150
2000
100
0.36
(9.1)
1000 1 2
50 2 1
0 0 gpm
0 1 2 3 4
l/min
0 5 10 15
Flow
(21.3)
0.84
0.04
(1.0)
1
ø0.47
(ø11.9)
9/16-18 UNF-2A
ø0.69
(ø17.9) Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.33 lbs
FH062-AS4 02600491
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 0.97 lbs
FH062-SS4 02600490
Zinc plated (420 bar) (0.44 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK08W blocks flow in both directions. When energized
the spool shifts and opens the bidirectional flow path.
Operation of Manual Override Option: To override, remove the coil nut, turn the
1 override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage 5.5 cu in/min. at 3000 psi and 158 SUS
(90 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
2
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
1 Cartridge Weight 0.38 Lbs. (0.17 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS082-N P/N: 03033920
Viton® FS082-V P/N: 03051756
Performance
Measured at 158 SUS (34 cSt)
bar psi T Oil = 115oF (46oC)
200
12.5 175
2 1
10 150
Pressure Drop
125
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
Seals
N = Buna-N
V = Viton®
Coil Voltage
0 = No coil, cartridge only
(59 Max.)
7/8” HEX
Torque 18.5-22 ft-lbs DC 12 = 12 VDC
(Torque 25-30 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
(15.5)
2
0.61
230 = 230 VAC
Coil Connector
DC DG = EN 175301-803-A
1.50
(38)
ø1.43
(ø36.3)
0.95
(24)
2.36 Max.
(60 Max.)
0.47
(12)
0.08
(2.0)
1.10
(28)
ø0.50
1
(ø12.7)
3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.33 lbs
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lbs
FH082-SS6 00560917
Zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10W blocks flow in both directions. When energized
the spool shifts and opens the bidirectional flow path.
Operation of Manual Override Option: To override, remove the coil nut, turn the
1 override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 9 gpm (35 l/min)
Internal Leakage 7.3 cu in/min. at 5000 psi and 158 SUS
(120 cc/min at 350 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 0.48 Lbs. (0.22 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS102-N P/N: 03033872
Viton® FS102-V P/N: 03051757
Performance
Measured at 158 SUS (34 cSt)
bar psi TOil = 115°F (46°C)
10
125
1 2
7.5 2 1
100
Pressure Drop
75
5
50
2.5
25
0 0 gpm
0 2 4 6 8 10
l/min
0 5 10 15 20 25 30 35 40
Flow Rate
Seals
N = Buna-N
V = Viton®
(71.5 Max.)
Coil Voltage
0 = No coil, cartridge only
1” HEX DC 12 = 12 VDC
Torque 28-33 ft-lbs 24 = 24 VDC
(Torque 38-45 Nm) 36 = 36 VDC
110 = 110 VDC (only available with connector DG)
AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
(18.8)
0.74
230 = 230 VAC
Coil Connector
(38.1)
1.50
2 DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3)
0.95
(24)
2.84
(72)
0.55
(14)
0.08
(2.0)
1.30
(33)
1
ø0.63
(ø15.88)
7/8-14 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lbs
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lbs
FH102-SS8 03037612
Zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK06C allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 2 to port 3 bi-directionally, while blocking flow at port 1.
3 1
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4 gpm (15 l/min)
Internal Leakage 5.5 cu in/min. at 3000 psi and 135 SUS
(90 cc/min at 207 bar and 28 cSt)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Minimum Pull-in Current 70% of nominal amperage
to Operate Valve
Typical Response Time On: 30 to 60 ms
(Varies with Pressure and Flow) Off: 20 to 40 ms
Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582050
Finisher: 02582051
3 Cartridge Weight 3.0 oz (85 grams)
Coil Weight 3.1 oz (88 grams)
Cartridge Material Steel with hardened work surfaces.
2 Zinc plated solenoid tube surface.
Buna N or Viton® o-rings
Solid thermoplastic polyester back-up rings.
1 Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation
Seal Kits Buna-N FS063-N P/N: 02610186
Viton® FS063-V P/N: 02610187
Performance
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
10 150
8 125
3 2
Pressure Drop
100
6
2 1
75
4
50
2
25
gpm
0 0
0 1 2 3 4
l/min
0 5 10 15
Flow
0.55
(14)
DC 12 = 12 VDC
(57.2)
2
2.25
24 = 24 VDC
AC 115 = 105 VDC (only available with connector DG)
230 = 205 VDC (only available with connector DG)
(All model 32-1329 coils are DC. AC models require an external diode bridge
mounted outside the coil)**
1.33
(33.8)
Operating Limits
Measured at 135 SUS (34 cSt)
bar psi Toil = 100°F (38°C)
350
5000
300
4000
(58.4) Max
250
2.3 Max
Pressure
200 3000
0.36
(9.1)
150
2000
100
2 3
1000
50 2 1
3 2
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15
0.04
Flow
3
(1)
(31.2)
1.23
1
ø0.44
(ø11.2)
ø0.47
(ø11.9)
9/16-18 UNF-2A
ø0.69
(ø17.5)
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.37 lbs
FH063-AS4 02600492
anodized (245 bar) (0.17 kg)
Steel, 6000 psi 1.07 lbs
FH063-SS4 02600493
zinc plated (420 bar) (0.43 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK08C allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 2 to port 3 bi-directionally, while blocking flow at port 1.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580086
Finisher: 02580087
Cartridge Weight 0.40 Lbs. (0.18 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS083-N P/N: 03054795
Viton® FS083-V P/N: 02591059
Performance
psi
Measured at 158 SUS (34 cSt)
bar o o
Toil = 115 F (46 C)
12.1 175
10.3 150 3 2
2 1
8.6 125
Pressure Drop
6.9 100
5.2 75
3.4 50
1.7 25
0 0 gpm
0 1 2 3 4 5
l/min
0 3.8 7.6 11.5 15.1 19.1
Flow
Seals
(69.5 Max.)
N = Buna-N
V = Viton®
7/8” HEX Coil Voltage
Torque 18.5-22 ft-lbs 0 = No coil, cartridge only
(Torque 25-30 Nm) DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(15.2)
0.60
110 = 110 VDC (only available with connector DG)
(29.7)
1.17
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2 230 = 230 VAC
(53.8)
(66.5)
2.12
2.62
Coil Connector
0.28
(7.1)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
1.13 Thick
DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
(30)
DT = Amp Junior Timer™, molded, radial mount*
1 AC AG = EN 175301-803-A
4.6 2.0
Coil Model 40-1836
(0.18) (50.8)
For other coil connector types consult factory
2.5
(60) *Coils with internal diode are available, consult factory.
ø1.43
(ø36.3)
0.95
Operating Limits
Measured at 158 SUS (34 cSt)
(24) bar psi Toil = 115° F (46° C)
350
5000
300 2 1
2 3
4000
250 3 2
1 2
Pressure
200 3000
(70.5 Max.)
2.78 Max.
150
2000
100
0.37
(9.5)
1000
50
0.08
(2)
0 0 gpm
0 2 4 6 8
l/min
0 5 10 15 20 25 30
Flow
3
1.61
(41)
1
ø0.56
(ø14.27)
ø0.63
(ø15.88)
3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.58 lbs
FH083-AS6 03011424
anodized (245 bar) (0.26 kg)
Steel, 6000 psi 1.7 lbs
FH083-SS6 00560920
zinc plated (420 bar) (0.77 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10C allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 2 to port 3 bi-directionally, while blocking flow at port 1.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm (32 l/min)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC10-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580092
2 Finisher: 02580093
Cartridge Weight 0.52 Lbs. (0.24 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS103-N P/N: 03071274
Viton® FS103-V P/N: 03049443
Performance
Measured at 34 cSt (158 SUS)
bar psi T Oil = 46°C (115°F)
8 120
3 2
1 2
6 90 2 3
2 1
Flow
4 60
2 30
0 0 gpm
0 2 4 6 8
0 10 20 30 35 l/min
Pressure
Seals
(81.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
1” HEX 0 = No coil, cartridge only
Torque 28-33 ft-lbs DC 12 = 12 VDC
(Torque 38-45 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(18.3)
0.72
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
1.38
(35)
Coil Connector
2.12
2 DC DG = EN 175301-803-A
(66.5)
2.62
200 3000
150
2000
100
1000
50
3.23 Max.
(82 Max.)
0 0 gpm
0 3 6 9
l/min
0 10 20 30 35
Flow
0.43
(11)
0.08
(2.0)
3
1.85
(47)
Operation
When de-energized the WK10C allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 2 to port 3 bi-directionally, while blocking flow at port 1.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm (32 l/min)
Internal Leakage 18 cu in/min. at 3600 psi and 158 SUS
(250 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC10-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580092
2 Finisher: 02580093
Cartridge Weight 0.52 Lbs. (0.24 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS103-N P/N: 03071274
Viton® FS103-V P/N: 03049443
Performance
Measured at 34 cSt (158 SUS)
bar psi T Oil = 46°C (115°F)
8 120
3 2
1 2&2 3
6 90 2 1
Flow
4 60
2 30
0 0 gpm
0 2 4 6 8
0 10 20 30 35 l/min
Pressure
Seals
(81.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
1” HEX 0 = No coil, cartridge only
Torque 28-33 ft-lbs DC 12 = 12 VDC
(Torque 38-45 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(18.3)
0.72
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
1.38
(35)
Coil Connector
2.12
2 DC DG = EN 175301-803-A
(66.5)
2.62
ø1.43
(ø36.3)
0.95
(24) Operating Limits
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C)
350
5000
300 1 2
2 1
4000
2 3
250
3 2
Pressure
200 3000
3.23 Max.
(82 Max.)
150
2000
100
1000
0.43
(11)
50
0.08
(2.0)
0 0 gpm
0 3 6 9
l/min
0 10 20 30 35
Flow
3
1.85
(47)
Operation
When de-energized the WK08D allows flow from port 3 to port 2 bi-directionally,
while blocking flow at port 1. When energized the spool shifts and opens flow
from port 2 to port 1 bi-directionally, while blocking flow at port 3.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm (19 l/min)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580086
Finisher: 02580087
Cartridge Weight 0.40 Lbs. (0.18 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS083-N P/N: 03054795
Viton® FS083-V P/N: 02591059
Performance
Measured at 158 SUS (34 cSt)
bar psi o o
Toil = 115 F (46 C)
12.1 175
10.3 150 2 1
Pressure Drop
8.6 125 3 2
6.9 100
5.2 75
3.4 50
1.7 25
gpm
0 0
0 1 2 3 4 5
l/min
0 3.8 7.6 11.5 15.1 19.1
Flow
(0.60)
15.2
3 36 = 36 VDC
(29.7)
1.17
0.28
(7.1)
Coil Connector
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
1.13 Thick DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
(30) DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
1 DT = Amp Junior Timer™, molded, radial mount*
0.18 2.0 AC AG = EN 175301-803-A
(4.6) (50.8)
Coil Model 40-1836
2.5 For other coil connector types consult factory
(60)
*Coils with internal diode are available, consult factory.
ø1.43
(ø36.3) Operating Limits
0.95 Measured at 158 SUS (34 cSt)
(24) psi Toil = 115° F (46° C)
350
5000
300
4000
250
Pressure
200 3000
(70.5 Max.)
2.78 Max.
150
2000
3 2
100 2 1
0.37
(9.5)
0.08
1000
(2.0)
2 3
50 1 2
0 0 gpm
0 2 4 6
l/min
0 5 10 15 20 25 30
Flow
3
1.61
(41)
1
ø0.56
(ø14.27)
ø0.63
(ø15.88)
3/4-16 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.58 lbs
FH083-AS6 03011424
anodized (245 bar) (0.26 kg)
Steel, 6000 psi 1.7 lbs
FH083-SS6 00560920
zinc plated (420 bar) (0.77 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10D allows flow from port 2 to port 3 bi-directionally,
while blocking flow at port 1. When energized the spool shifts and opens flow
from port 2 to port 1 bi-directionally, while blocking flow at port 3.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm (32 l/min)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-3 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580092
Finisher: 02580093
Cartridge Weight 0.52 Lbs. (0.24 kg)
1 Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS103-N P/N: 03071274
Performance Viton® FS103-V P/N: 03049443
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C)
15
200
12.5 3 2
175
1 2
150
Pressure Drop
10 2 1
125 2 3
7.5
100
5 75
50
2.5
25
0 gpm
0
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
N = Buna-N
1” HEX V = Viton®
Torque 28-33 ft-lbs Coil Voltage
(Torque 38-45 Nm) 0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.3)
0.72
110 = 110 VDC (only available with connector DG)
1.38
(35)
AC 24 = 24 VAC
3 115 = 115 VAC
(53.8)
2
(66.5)
2.62
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
1.25 Thick DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
1 (32) DT = Amp Junior Timer™, molded, radial mount*
2.0 AC AG = DIN 175301-803
(50.8) Coil Model 50-1836
2.5 For other coil connector types consult factory
(60) *Coils with internal diode are available, consult factory.
ø1.43
(ø36.3)
Operating Limits
0.95 Measured at 158 SUS (34 cSt)
(24) bar psi Toil = 115°F (46°C)
350
5000
300
1 2
4000
250 2 1
2 3
2.83 Max.
(72 Max.)
Pressure
3 2
200 3000
150
2000
0.55
(14)
100
0.08
(2.0)
1000
50
0 0 gpm
0 3 6 9
l/min
0 10 20 30 35
Flow
3
1.85
(47)
1 ø0.63
(ø15.88)
ø0.69
(ø17.48)
7/8-14 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.60 lbs
FH103-AS8 03038095
anodized (245 bar) (0.27 kg)
Steel, 6000 psi 1.74 lbs
FH103-SS8 03037704
zinc plated (420 bar) (0.79 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK07L allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 1 to port 3 bi-directionally, while blocking flow at port 2.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• One piece cartridge body design to maximize reliability
• Screw type manual override option
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 2.5 gpm at 5000 psi (10 l/min at 350 bar)
Internal Leakage 4.3 cu in/min. at 3000 psi and 158 SUS
(70 cc/min at 280 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
3 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
2 Installation No orientation restrictions
Cavity FC07-3 (contact HYDAC for information)
Cavity Tools Rougher: N/A
Finisher: N/A
1 Cartridge Weight 0.33 Lbs. (0.15 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Performance Seal Kits Buna-N FS073-N P/N: Consult factory
Viton® FS073-V P/N: Consult factory
Measured at 158 SUS (34 cSt)
bar psi Toil = 115° F (46° C)
12
160
3 1
10 1 2
120
8
Pressure Drop
6 80
4
40
2
0 gpm
0
0 1 2
l/min
0 2 4 6 8 10
Flow
24 = 24 VDC
36 = 36 VDC
(63.5 Max.)
AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
230 = 230 VAC
5/8” HEX Coil Connector
0.08
1
ø0.43
(ø11)
ø0.50
(ø12.6)
5/8-18UNF-2A
ø0.83
(ø21)
Operation
When de-energized the WK08L allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 1 to port 3 bi-directionally, while blocking flow at port 2.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4.5 gpm (17 l/min)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580086
Finisher: 02580087
Cartridge Weight 0.40 Lbs. (0.18 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS083-N P/N: 03054795
Performance Viton® FS083-V P/N: 02591059
Measured at 158 SUS (34 cSt)
bar psi
T Oil = 115°F (46°C)
200
12.5
3 1
10 150
1 2
Pressure
7.5
100
5
50
2.5
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15
Flow
Seals
(69.5 Max.)
N = Buna-N
V = Viton®
7/8” HEX Coil Voltage
Torque 18.5-22 ft-lbs 0 = No coil, cartridge only
(Torque 25-30 Nm) DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(15.2)
0.60
110 = 110 VDC (only available with connector DG)
(29.7)
1.17
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2 230 = 230 VAC
(53.8)
(66.5)
2.12
2.62
Coil Connector
0.28
(7.1)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
DW = WeatherPak™ on leadwires - 9.5” long (24 cm)*
1.13 Thick DN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)*
(30) DT = Amp Junior Timer™, molded, radial mount*
1 AC AG = EN 175301-803-A
4.6 2.0 Coil Model 40-1836
(0.18) (50.8) For other coil connector types consult factory
2.5
(60) *Coils with internal diode are available, consult factory.
ø1.43
(ø36.3)
Operating Limits
0.95 Measured at 158 SUS (34 cSt)
bar psi
(24) Toil = 115°F (46°C)
350
5000
300
4000
250
Pressure
200 3000
(70.5 Max.)
2.78 Max.
150
2000 2 1
100 3 1
1 2
1000
0.37
(9.5)
1 3
50
0.08
0 0 gpm
(2)
0 1 2 3 4 5
l/min
0 5 10 15 20
Flow
3
1.61
(41)
1
ø0.56
(ø14.27)
ø0.63
(ø15.88)
3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.58 lbs
FH083-AS6 03011424
anodized (245 bar) (0.26 kg)
Steel, 6000 psi 1.7 lbs
FH083-SS6 00560920
zinc plated (420 bar) (0.77 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10L allows flow from port 2 to port 1 bi-directionally,
while blocking flow at port 3. When energized the spool shifts and opens flow
from port 1 to port 3 bi-directionally, while blocking flow at port 2.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• One piece cartridge body design to maximize reliability
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm (32 l/min)
Internal Leakage 6 cu in/min. at 3600 psi and 158 SUS
(100 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
125 2 1
7.5
100
3 1
5 75
50
2.5
25
0 00 gpm
1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
Seals
(81.5 Max.)
N = Buna-N
V = Viton®
Coil Voltage
1” HEX 0 = No coil, cartridge only
Torque 28-33 ft-lbs DC 12 = 12 VDC
(Torque 38-45 Nm) 24 = 24 VDC
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
(18.3)
0.72
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
1.38
(35)
Coil Connector
2.12
2 DC DG = EN 175301-803-A
(66.5)
2.62
200 3000 3 1
2 3
1 3
150
2000
100
1000
3.23 Max.
(82 Max.)
50
0 0 gpm
0 3 6 9
l/min
0 10 20 30 35
Flow
0.43
(11)
0.08
(2.0)
3
1.85
(47)
Operation
When de-energized the WK08A allows flow from port 2 to port 1 bi-directionally
and port 3 to port 4 bi-directionally. When energized the spool shifts and blocks
all ports.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm at 3600 psi (19 l/min at 250 bar)
2 gpm at 5000 psi (7.6 l/min at 350 bar)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
4 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3
Installation No orientation restrictions
Cavity FC08-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580088
Finisher: 02580089
Cartridge Weight 0.42 Lbs. (0.19 kg)
1 Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS084-N P/N: 03071272
Viton® FS084-V P/N: 03071273
Performance
Measured at 158 SUS (34 cSt)
psi o o
bar Toil = 115 F (46 C)
200
12.5 175 3 4
150 2 1
Pressure Drop
10
125
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20 19
Flow
(15.2)
DC 12 = 12 VDC
0.60
24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4 110 = 110 VDC (only available with connector DG)
(82.5)
3.25
1.73
(44)
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2.84
(72)
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
3
2.13
(54)
1
ø0.56
(ø12.7)
ø0.56
ø0.63 (ø14.27)
(ø15.88)
3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.72 lbs
FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10A allows flow from port 3 to port 4 bi-directionally
and port 2 to port 1 bi-directionally. When energized the spool shifts and blocks
flow at all ports.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
2 Finisher: 02580249
Cartridge Weight 0.55 Lbs. (0.25 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS104-N P/N: 03051912
Viton® FS104-V P/N: 03071275
Performance
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C)
12.5
175
3 4
10 150
1 2
125 2 1
Pressure Drop
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
Seals
N = Buna-N
V = Viton®
1” HEX Coil Voltage
Torque 28-33 ft-lbs 0 = No coil, cartridge only
(Torque 38-45 Nm) DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74
110 = 110 VDC (only available with connector DG)
(35.05)
1.38
AC 24 = 24 VAC
4 115 = 115 VAC (AC coils internally full wave rectified)
(51.3)
2.02
Coil Connector
(72)
3 DC DG = EN 175301-803-A
(82.6)
ø1.43
(ø36.3)
0.95
(24)
3.23
(82) 0.43
(11)
0.08
(2.0)
4
(63.5)
2.5
Operation
When de-energized the WK08K allows flow from port 2 to port 1 bi-directionally
and port 3 to port 4 bi-directionally. When energized the spool shifts and allows
flow from port 1 to port 3 bi-directionally , ports 2 and 4 are blocked.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4 gpm at 3600 psi (15 l/min at 250 bar)
2 gpm at 5000 psi (7.6 l/min at 350 bar)
Internal Leakage 5 cu in/min. at 3600 psi and 158 SUS
(82 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
4 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC08-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580088
Finisher: 02580089
Cartridge Weight 0.42 Lbs. (0.19 kg)
1 Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS084-N P/N: 03071272
Viton® FS084-V P/N: 03071273
Performance
Measured at 158 SUS (34 cSt)
psi
bar Toil = 115°F (46°C)
200
12.5
175 2 1
3 4
10 150
3 1
Pressure Drop
125
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 19
Flow
C = Cartridge only
AS6 = SAE-6 Ports, aluminum body
SS6 = SAE-6 Ports, steel body
(69.5 Max.)
2.74 Max.
(15.2)
DC 12 = 12 VDC
0.60
24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4 110 = 110 VDC (only available with connector DG)
1.73
(44)
AC 24 = 24 VAC
115 = 115 VAC
3 (AC coils internally full wave rectified)
2.84
(72)
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
4
2.13
(54)
ø0.56 1
(ø12.7) ø0.56
ø0.63 (ø14.27)
(ø15.88) 3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.72 lbs
FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10K allows flow from port 1 to port 2 bi-directionally
and from port 3 to port 4 bi-directionally. When energized the spool shifts and
allows flow from port 1 to port 3 bi-directionally , ports 2 and 4 are blocked.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn
the override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
4 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.55 Lbs. (0.25 kg)
1 Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS104-N P/N: 03051912
Performance Viton® FS104-V P/N: 03071275
Measured at 158 SUS (34 cSt)
psi bar Toil = 115°F (46°C)
200 14
175 12 1 3
1 2
150 3 1 2 1
10
3 4
Pressure Drop
125
8
100
6
75
4
50
25 2
0 gpm
0 0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
V = Viton®
1” HEX
Coil Voltage
Torque 28-33 ft-lbs
0 = No coil, cartridge only
(Torque 38-45 Nm)
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
110 = 110 VDC (only available with connector DG)
0.74
(35.05)
AC 24 = 24 VAC
1.38
3 DC DG = EN 175301-803-A
(82.6)
3.25
ø1.43
(ø36.3)
0.95
(24)
2.83
(72)
0.55
(15)
0.08
(2)
4
(63.5)
3
2.5
Operation
When de-energized the WK10N allows flow from port 1 to port 3 bi-directionally,
ports 2 and 4 are blocked. When energized the spool shifts and allows flow from
port 1 to port 2 bi-directionally and from port 3 to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.55 Lbs. (0.25 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
Performance steel shell, polyamid encapsulation.
Measured at 158 SUS (34 cSt) Seal Kits Buna-N FS104-N P/N: 03051912
bar psi Viton® FS104-V P/N: 03071275
12.5
Toil = 115°F (46°C)
175
1 3
10 150
Pressure Drop
1 2
125 3 4
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
Seals
N = Buna-N
V = Viton®
1” HEX Coil Voltage
Torque 28-33 ft-lbs 0 = No coil, cartridge only
(Torque 38-45 Nm) DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74
110 = 110 VDC (only available with connector DG)
(35.05)
1.38
AC 24 = 24 VAC
4 115 = 115 VAC (AC coils internally full wave rectified)
(51.3)
2.02
Coil Connector
(72)
3 DC DG = EN 175301-803-A
(82.6)
ø1.43
(ø36.3)
0.95
(24)
3.23
(82) 0.43
(11)
0.08
(2.0)
4
(63.5)
2.5
Operation
When de-energized the WK08P blocks flow at ports 2 and 3, flow is allowed from
port 1 to port 4 bi-directionally. When energized the spool shifts and allows flow
from port 1 to port 2 bi-directionally and from port 3 to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4 gpm at 3600 psi (15 l/min at 250 bar)
2 gpm at 5000 psi (7.6 l/min at 350 bar)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
4 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC08-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580088
Finisher: 02580089
Cartridge Weight 0.42 Lbs. (0.19 kg)
1
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Performance Seal Kits Buna-N FS084-N P/N: 03071272
Measured at 158 SUS (34 cSt) Viton® FS084-V P/N: 03071273
Toil = 115°F (46°C)
400
25 3 4
4 1
300
Pressure Drop
20 2 1
200
15
100
5
0 gpm
0 0 1 2 3 4 5 6 7
0 5 10 15 20 25 l/min
Flow Rate
(15.2)
0.60
24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
110 = 110 VDC (only available with connector DG)
4
1.73
(44)
AC 24 = 24 VAC
115 = 115 VAC (AC coils internally full wave rectified)
3
2.84
(72)
DC DG = EN 175301-803-A
3.25
0.28
(7.1)
ø1.43
(ø36.3)
0.95
(24)
2.36
(60)
0.47
(12)
0.08
(2)
4
3
2.13
(54)
1
ø0.56
(ø12.7)
ø0.56
(ø14.27)
ø0.63
(ø15.88)
3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.72 lbs
FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10P blocks flow at ports 2 and 3, flow is allowed from
port 1 to port 4 bi-directionally. When energized the spool shifts and allows flow
from port 1 to port 2 bi-directionally and from port 3 to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
4 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.55 Lbs. (0.25 kg)
1 Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Performance Seal Kits Buna-N FS104-N P/N: 03051912
Measured at 158 SUS (34 cSt)
Viton® FS104-V P/N: 03071275
bar psi Toil = 115°F (46°C)
12.5
175
2 1
150 1 2
10
4 1
125
3 4
Pressure Drop
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
V = Viton®
1” HEX
Torque 28-33 ft-lbs Coil Voltage
(Torque 38-45 Nm) 0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
110 = 110 VDC (only available with connector DG)
0.74
(35.05)
AC 24 = 24 VAC
1.38
3 DC DG = EN 175301-803-A
(82.6)
3.25
ø1.43
(ø36.3)
0.95
(24)
2.83
(72)
0.55
(15)
0.08
(2)
4
(63.5)
3
2.5
Operation
When de-energized the WK08R allows flow from port 2 to port 1 bi-directionally
and port 3 to port 4 bi-directionally. When energized the spool shifts and allows
bi-directional flow from port 1 to port 4, ports 2 and 3 are blocked.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm at 3600 psi (19 l/min at 250 bar)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC08-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580088
2 Finisher: 02580089
Cartridge Weight 0.42 Lbs. (0.19 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS084-N P/N: 03071272
Viton® FS084-V P/N: 03071273
Performance
Measured at 158 SUS (34 cSt)
bar psi T Oil = 115oF (46oC)
20 300
2 1
250
4 1
15 1 2
200
Pressure Drop
3 4
10 150
100
5
50
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
(15.2)
DC 12 = 12 VDC
0.60
24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4
(82.5)
1.73
(44)
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2.84
(72)
200 3000 3 4
(70.5 Max.)
2.78 Max.
1 4
150
2000
100
1000
0.37
(9.5)
50
0.08
(2)
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 20
Flow
3
2.13
(54)
1
ø0.56
(ø12.7)
ø0.56
ø0.63 (ø14.27)
(ø15.88)
3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.72 lbs
FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10R allows flow from port 3 to port 4 bi-directionally
and port 2 to port 1 bi-directionally. When energized the spool shifts and blocks
flow at ports 2 and 3, allowing the flow from port 1 to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 6 cu in/min. at 3600 psi and 158 SUS
(100 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.55 Lbs. (0.25 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS104-N P/N: 03051912
Performance Viton® FS104-V P/N: 03071275
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C)
12.5
175
1 2
150
10 1 4
2 1
125
Pressure Drop
4 1
7.5 3 4
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
Seals
N = Buna-N
V = Viton®
1” HEX Coil Voltage
Torque 28-33 ft-lbs 0 = No coil, cartridge only
(Torque 38-45 Nm) DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74
110 = 110 VDC (only available with connector DG)
(35.05)
1.38
AC 24 = 24 VAC
4 115 = 115 VAC (AC coils internally full wave rectified)
(51.3)
2.02
Coil Connector
(72)
3 DC DG = EN 175301-803-A
(82.6)
ø1.43
(ø36.3)
0.95
(24)
3.23
(82) 0.43
(11)
0.08
(2.0)
4
(63.5)
2.5
Operation
When de-energized the WK08X allows flow from port 2 to port 3 bi-directionally
and port 1 to port 4 bi-directionally. When energized the spool shifts and
allows flow from port 3 to port 4 bi-directionally and from port 2 to port 1 bi-
3 1 directionally.
Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4.5 gpm at 3600 psi (17 l/min at 250 bar)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
4 Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
3 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2
Cavity FC08-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580088
Finisher: 02580089
Cartridge Weight 0.42 Lbs. (0.19 kg)
1
Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Performance Seal Kits Buna-N FS084-N P/N: 03071272
Measured at 158 SUS (34 cSt) Viton® FS084-V P/N: 03071273
bar psi Toil = 115F (46C)
400
25 4 1
350
3 2
20 300 3 4
Pressure Drop
250 2 1
15
200
10 150
100
5
50
0 0 gpm
0 1 2 3 4 5 6 7
l/min
0 5 10 15 20 25
Flow
N = Buna-N
Torque 18.5-22 ft-lbs V = Viton®
(Torque 25-30 Nm)
Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
(15.2)
0.60
24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4 110 = 110 VDC (only available with connector DG)
1.73
(44)
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2.84
(72)
DC DG = EN 175301-803-A
0.28
(7.1)
ø1.43
(ø36.3)
0.95
(24)
2.36
(60)
0.47
(12)
0.08
(2)
4
3
2.13
(54)
1
ø0.56
(ø12.7)
ø0.56
(ø14.27)
ø0.63
(ø15.88)
3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.72 lbs
FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10X allows flow from port 2 to port 3 bi-directionally
and port 1 to port 4 bi-directionally. When energized the spool shifts and
allows flow from port 3 to port 4 bi-directionally and from port 2 to port 1 bi-
3 1 directionally.
Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 6 cu in/min. at 3600 psi and 158 SUS
(100 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
4 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
3 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
2 Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.55 Lbs. (0.25 kg)
1
Coil Weight 0.51 Lbs. (0.23 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
Performance steel shell, polyamid encapsulation.
Measured at 158 SUS (34 cSt)
Toil = 115°F (46°C) Seal Kits Buna-N FS104-N P/N: 03051912
Viton® FS104-V P/N: 03071275
bar psi
12.5
175
3 4
150
10 3 2
2 1
Pressure Drop
125
4 1
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
V = Viton®
1” HEX
Coil Voltage
Torque 28-33 ft-lbs
0 = No coil, cartridge only
(Torque 38-45 Nm)
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
110 = 110 VDC (only available with connector DG)
0.74
(35.05)
AC 24 = 24 VAC
1.38
3 DC DG = EN 175301-803
(82.6)
3.25
ø1.43
(ø36.3)
0.95
(24)
2.83
(72)
0.55
(15)
0.08
(2)
4
(63.5)
3
2.5
Performance
Measured at 135 SUS (28 cSt)
bar psi
Toil = 100° F (38° C)
14 200
12
150 3 2 or 3 4
10
Pressure Drop
4 1
8
2 1
100
6
4
50
2
gpm
0 0
0 1 2 3
l/min
0 3 6 9
Flow
C = Cartridge only
AS4 = SAE-4 Ports, aluminum body
11/16” HEX SS4 = SAE-4 Ports, steel body
Torque 12-15 ft-lbs Seals
(Torque 16-20 Nm) N = Buna-N
V = Viton®
0.55
(14)
Coil Voltage
(24.1)
0.95
1.34
DC 12 = 12 VDC
(34)
24 = 24 VDC
(54.1)
2.13
3 AC 115 =
230 =
105 VDC (only available with connector DG)
205 VDC (only available with connector DG)
2 (All model 32-1329 coils are DC. AC models require an external diode bridge
(66.8)
0.28
(7.1)
2.63
300
4000
(58.4) Max
2.30 Max
250
Pressure
200 3000
150
2000
100 3 2
3 4
1000 2 4
0.36
(9.1)
50 4 1
0 0 gpm
0 1 2 3 4
0.04
(1)
l/min
0 5 10 15
4 Flow
(41.7)
1.64
3
2
1
ø0.40
(ø10) ø0.44
ø0.47 (ø11.2)
(ø11.9)
9/16-18 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.43 lbs
FH064-AS4 02600462
anodized (245 bar) (0.20 kg)
Steel, 6000 psi 1.25 lbs
FH064-SS4 02600461
zinc plated (420 bar) (0.57 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK08Y allows flow from port 2 to port 1 bi-directionally
and port 3 to port 4 bi-directionally. When energized the spool shifts and opens
flow from port 2 to port 3 bi-directionally and from port 4 to port 1.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm at 3600 psi (19 l/min at 250 bar)
Internal Leakage 5 cu in/min. at 3600 psi and 158 SUS
(82 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC08-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580088
2 Finisher: 02580089
Cartridge Weight 0.42 Lbs. (0.19 kg)
Coil Weight 0.42 Lbs. (0.19 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS084-N P/N: 03071272
Viton® FS084-V P/N: 03071273
Performance
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C)
12 175
4 1
10 150
2 1
3 4
Pressure Drop
125
8 3 2
100
6
75
4
50
2 25
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 19
Flow
(15.2)
DC 12 = 12 VDC
0.60
24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4
(82.5)
1.73
(44)
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2.84
(72)
ø1.43
(ø36.3)
0.95
(24)
Operating Limits
Measured at 158 SUS (34 cSt)
bar psi Toil = 115° F (46° C)
350
(70.5 Max.)
2.78 Max.
5000
300
1 2
4000 2 3
250 2 1
Pressure
4 3
0.37
(9.5)
200 3000 4 1
0.08
1 4
(2)
3 4
150
2000 3 2
100
1000
50
0 0 gpm
4 0
0
1
5
2
10
3 4
15
5
20
l/min
Flow
3
2.13
(54)
1
ø0.56
(ø12.7)
ø0.56
ø0.63 (ø14.27)
(ø15.88)
3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.72 lbs
FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10Y allows flow from port 2 to port 1 bi-directionally
and port 3 to port 4 bi-directionally. When energized the spool shifts and opens
flow from port 2 to port 3 bi-directionally and from port 4 to port 1.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 7.3 cu in/min. at 3600 psi and 158 SUS
(120 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 2.22 A at 12VDC; 1.13 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
2 Finisher: 02580249
Cartridge Weight 0.55 Lbs. (0.25 kg)
Coil Weight 0.51 Lbs. (0.23 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Performance Seal Kits Buna-N FS104-N P/N: 03051912
Measured at 158 SUS (34 cSt) Viton® FS104-V P/N: 03071275
Toil = 115°F (46°C)
bar psi
12.5
175
3 4
150 3 2
10
Pressure Drop
2 1
125 4 1
7.5
100
5 75
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
Seals
N = Buna-N
V = Viton®
1” HEX
Coil Voltage
Torque 28-33 ft-lbs
0 = No coil, cartridge only
(Torque 38-45 Nm)
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74
110 = 110 VDC (only available with connector DG)
(35.05)
1.38
AC 24 = 24 VAC
4 115 = 115 VAC (AC coils internally full wave rectified)
(51.3)
2.02
Coil Connector
3 DC DG = EN 175301-803-A
(82.6)
ø1.43
(ø36.3)
0.95
(24)
3.23
(82) 0.43
(11)
0.08
(2.0)
4
(63.5)
2.5
Operation
When de-energized the WK08Z blocks flow at all ports. When energized the
spool shifts and allows flow from port 1 to port 2 bi-directionally and from port 3
to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, push and hold the override
button. The override is not detented. The manual override option is intended for
emergency use, not for continuous duty operation.
Features
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 4.5 gpm at 3600 psi (17 l/min at 250 bar)
2 gpm at 5000 psi (7.6 l/min at 350 bar)
Internal Leakage 5.5 cu in/min. at 3600 psi and 158 SUS
(90 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
4 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3
Installation No orientation restrictions
Cavity FC08-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580088
Finisher: 02580089
Cartridge Weight 0.42 Lbs. (0.19 kg)
1 Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Seal Kits Buna-N FS084-N P/N: 03071272
Performance Viton® FS084-V P/N: 03071273
Measured at 158 SUS (34 cSt)
Toil = 115o F (46o C)
bar psi
12 175
10 150 3 4
2 1
Pressure Drop
125
8
100
6
75
4
50
2 25
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 19
Flow
(15.2)
DC 12 = 12 VDC
0.60
24 = 24 VDC
(29.7)
1.17
36 = 36 VDC
4
(82.5)
1.73
(44)
AC 24 = 24 VAC
3 115 = 115 VAC (AC coils internally full wave rectified)
2.84
(72)
ø1.43
(ø36.3)
0.95
(24)
(70.5 Max.)
2.78 Max.
0.37
(9.5)
0.08
(2)
3
2.13
(54)
1
ø0.56
(ø12.7)
ø0.56
ø0.63 (ø14.27)
(ø15.88)
3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.72 lbs
FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
Steel, 6000 psi 2.12 lbs
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10Z blocks flow at all ports. When energized the
spool shifts and allows flow from port 1 to port 2 bi-directionally and from port 3
to port 4 bi-directionally.
3 1 Operation of Manual Override Option: To override, remove the coil nut, turn the
override knurled knob counterclockwise until it stops. The override will remain
activated until the knob is turned clockwise to original position. The manual
override option is intended for emergency use, not for continuous duty operation.
Features
• Screw type manual override
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 8.4 gpm at 5000 psi (32 l/min at 350 bar)
Internal Leakage 6 cu in/min. at 3600 psi and 158 SUS
(100 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw @ 68˚F (20˚C) 1.5 A at 12VDC; 0.8 A at 24VDC
Min. Pull-in Voltage @ 68˚F (20˚C) 90% of nominal @ 5000 psi (350 bar)
4 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
3 Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.64 Lbs. (0.29 kg)
1 Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Performance Seal Kits Buna-N FS104-N P/N: 03051912
Measured at 158 SUS (34 cSt) Viton® FS104-V P/N: 03071275
bar psi TOil = 115°F (46°C)
12.5
175
3 4
150 1 2
10
2 1
125 4 3
Pressure Drop
7.5
100
5 75
50
2.5
25
0 gpm
0 0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
V = Viton®
1” HEX
Torque 28-33 ft-lbs Coil Voltage
(Torque 38-45 Nm) 0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
36 = 36 VDC
(18.8)
0.74
110 = 110 VDC (only available with connector DG)
(35.05)
AC 24 = 24 VAC
1.38
(51.3)
3 DC DG = EN 175301-803-A
(82.6)
3.25
ø1.43
(ø36.3)
0.95
(24)
2.83
(72)
0.55
(15)
0.08
(2)
4
(63.5)
3
2.5
Operation
When de-energized the WK06E blocks flow at all ports. When coil S1 is energized
the spool shifts and allows flow from port 2 to port 1 and from port 3 to port 4.
When coil S2 is energized the spool shifts and allows flow from port 4 to port 1
S1 3 1 S2 and from port 3 to port 2.
Specifications
Operating Pressure 5000 psi (350 bar), 3000 psi (210 bar) Max Port 1
Nominal Flow See Operating Limits
Internal Leakage 14.0 cu in/min. at 3000 psi and
135 SUS (230 cc/min at 207 bar and 28 cSt)
S1 Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current 70% of nominal amperage
to Operate Valve
Fluid Compatibility Mineral-Based or Synthetics with
S2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582057
Finisher: 02582058
Cartridge Weight 3.6 oz (102 grams)
4 Coil Weight 3.1 oz (88 grams) each (2 required)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
3 Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire,
2 steel shell, polyester encapsulation.
Seal Kits Buna-N FS064-N P/N: 02610188
1 Viton® FS064-V P/N: 02610189
Performance
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
14 200
12
150 3 2 or 3 4
10
Pressure Drop
4 1
8 2 1
100
6
4
50
2
0 0 gpm
0 1 2 3
l/min
0 1 2 3 4 5 6 7 8 9 10 11
Flow
0.55
(14)
DC 12 = 12 VDC
(24.1)
0.95
24 = 24 VDC
4
1.34
AC 115 = 105 VDC (only available with connector DG)
(34)
230 = 205 VDC (only available with connector DG)
(54.1)
3
(66.8)
2.13
2.63
(All model 32-1329 coils are DC. AC models require an external diode bridge
mounted outside the coil)**
2
0.28
(7.1)
Coil Connector
DG = EN 175301-803-B (IP65 Rated)**
DC DL = Leadwires (2) - 18” long (46 cm) AWG18, TYPE UL 1815
1.0 Thick (IP69K Rated)*
DN = Deutsch DT04-2P intergral molded (IP69K Rated)*
1 (25.4)
Use mating plug EN 175301-803-B without diode bridge for
0.25 1.5 DC voltages P/N 02600570
(6.4) (38.1)
2.0 Use mating plug EN 175301-803-B w/diode bridge for
(50.8) AC voltages P/N 02600582
Coil Model 32-1329
For other coil connector types consult factory
** Mating Plugs sold separately
*Coils with internal transient suppression diode are available, consult factory.
ø1.13
0.33
(8.4)
(ø29)
Operating Limits
Measured at 135 SUS (28 cSt)
1.33 bar psi
Toil = 100°F (38°C)
S1 (33.8) 5000
300
4000
250
(81.5) Max
3.21 Max
Pressure
200 3000
150
2000
S2 100
3 2 4 1
0.36
(9.1)
1000 3 4 2 1
50
0 0 gpm
0 1 2 3
0 2 4 6 8 10 12 l/min
Flow gpm
0.04
(1)
4
(41.7)
1.64
3
2
Hydraulic Symbol
2 4
S1
S1 3 1 S2
Description
A screw-in cartridge, solenoid operated, 4-way, 3 position, direct acting, spool
type valve.
S2
Operation
When de-energized the WK08E blocks flow at all ports. When coil S1 is energized
the spool shifts and allows flow from port 1 to port 2 and from port 3 to port 4.
When coil S2 is energized the spool shifts and allows flow from port 4 to port 1
and from port 3 to port 2.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
4 Features
• Push/pull type manual override button, detented manual override option.
3 • High flow capacity
Specifications
2
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm at 3000 psi (20 l/min@ 210 bar)
1 Internal Leakage 10 cu in/min. at 3000 psi and
158 SUS (160 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115% of
Performance nominal voltage
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C) Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
140
Minimum Pull-in Current 75% of nominal amperage
8 120 3 2 Typical Response Time On: 30 to 60 ms
100
3 4 (Varies with Pressure and Flow) Off: 20 to 40 ms
4 1
6 Fluid Compatibility Mineral-Based or Synthetics with
Pressure
80 2 1
lubricating properties
4 60
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
40 Filtration 21/19/16 or cleaner per (ISO 4406)
2
20 Installation No orientation restrictions
0 0 gpm
Cavity FC08-4 (see Line Bodies & Cavities section)
0 1 2 3 4 5
0 5 10 15 20
l/min Cavity Tools Rougher: 02580088
Flow Finisher: 02580089
Cartridge Weight 0.6 lbs (0.27 kg)
Operating Limits Coil Weight 2 x 0.42 lbs (2 x 0.19 kg)
Measured at 135 SUS (28 cSt)
bar psi
Toil = 100°F (38°C) Cartridge Material Steel with hardened work surfaces.
6000
400 Zinc plated solenoid tube surface.
5000 Buna N or Viton® o-rings
300 Solid thermoplastic polyester back-up rings.
4000
Pressure
0 0
0 1 2 3 4 5 6 gpm
0 5 10 15 20 l/min
Flow
0.30
(7.5)
S1
(S2) (S2)
(122.5)
4.82
(122.5)
4.82
0.59 0.51
(15) (13)
ø0.91
(ø23.1)
4
2.13
(54) 3
2
ø0.50 1
(ø12.7) ø0.56
ø0.62 (ø14.2)
(ø15.7) 3/4-16 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.72 lb
FH084-AS6 03011404
anodized (245 bar) (0.33 kg)
Steel, 6000 psi 2.12 lb
FH084-SS6 00563381
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10E blocks flow at all ports. When coil S1 is energized
the spool shifts and allows flow from port 1 to port 2 and from port 3 to port 4.
When coil S2 is energized the spool shifts and allows flow from port 4 to port 1
S1 3 1 S2 and from port 3 to port 2.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
Features
• Push/pull type manual override button, detented manual override option.
S1
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 6 gpm at 3000 psi (23 l/min at 210 bar)
Consult factory for flow rating above 3000 psi (210 bar)
Internal Leakage 10 cu in/min. at 3000 psi and 158 SUS
S2 (160 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115% of
nominal voltage
Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Minimum Pull-in Current 90% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
4
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
2 Finisher: 02580249
Cartridge Weight 0.64 lbs (0.29 kg)
Coil Weight 0.42 lbs (0.19 kg) - 2 coils required
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Performance Seal Kits Buna-N FS104-N P/N: 03051912
Measured at 158 SUS (34 cSt) Viton® FS104-V P/N: 03071275
bar psi Toil = 115° F (46° C)
10 140
120 3 2
8 3 4
100 4 1
Pressure Drop
2 1
6
80
4 60
40
2
20
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 20
Flow
(18.8)
0.74
(35.05)
AC 24 = 24 VAC
4 115 = 115 VAC
(82.6)
3.25
Coil Connector
3
2.83
(72)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
2
0.28
(7.1)
ø1.43
(ø36.3) 0.95
(24)
(S2) (S2)
S2
0.59
(15)
(122.5)
4.82
(122.5)
4.82
0.08
(2.0)
4
(63.5)
2.5
Operation
When de-energized the WK06G allows flow from port 3 to port 1, while blocking
flow at ports 2 and 4. When coil S1 is energized the spool shifts and allows flow
from port 3 to port 2 and from port 4 to port 1. When coil S2 is energized the
S1 3 1 S2 spool shifts and allows flow from port 3 to port 4 and from port 2 to port 1.
Specifications
Operating Pressure 5000 psi (350 bar), 3000 psi (210 bar) Max Port 1
Nominal Flow See Operating Limits
Internal Leakage 11.6 cu in/min. at 3000 psi and
135 SUS (190 cc/min at 207 bar and 28 cSt)
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
S1 Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current 70% of nominal amperage
to Operate Valve
S2 Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582057
Finisher: 02582058
4 Cartridge Weight 3.6 oz (102 grams)
Coil Weight 3.1 oz (88 grams) each (2 required)
3 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
2 Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire,
1 steel shell, polyester encapsulation.
Seal Kits Buna-N FS064-N P/N: 02610188
Viton® FS064-V P/N: 02610189
Performance
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C)
14 200
12 175
150 3 4 or 3 2
10
Pressure Drop
125 2 1 or 4 1
8
3 1
100
6
75
4
50
2 25
gpm
0 0
0 0.5 1 1.5 2 2.5
l/min
0 2 4 6 8
Flow
0.55
(14)
Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
(24.1)
0.95
24 = 24 VDC
1.34
(34)
4 AC 115 = 105 VDC (only available with connector DG)
(54.1)
2.13
Coil Connector
DG = EN 175301-803-B (IP65 Rated)**
DC DL = Leadwires (2) - 18” long (46 cm) AWG18, TYPE UL 1815
(IP69K Rated)*
1.0 Thick
DN = Deutsch DT04-2P intergral molded (IP69K Rated)*
1 (25.4)
Use mating plug EN 175301-803-B without diode bridge for
0.25 1.5 DC voltages P/N 02600570
(6.4) (38.1) Use mating plug EN 175301-803-B w/diode bridge for
2.0
AC voltages P/N 02600582
(50.8)
Coil Model 32-1329
For other coil connector types consult factory
ø1.13
(ø29) ** Mating Plugs sold separately
*Coils with internal transient suppression diode are available, consult factory.
(8.4)
.33
S1 1.33
(33.8)
(81.5) Max
Operating Limits
3.21 Max
200 3000
(9.1)
.36
150
2000
3 2,
(1.0)
100 4 1,
.04
3 4,
4 50
1000
2 1
gpm
3
(41.7)
0 0
1.64
0 1 2 3
l/min
0 2 4 6 8 10
2 Flow
1
ø.40
(ø10)
ø.44
ø.47 (ø1.2)
(ø11.9)
9/16-18 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.41 lbs
FH064-AS4 02600462
anodized (245 bar) (0.19 kg)
Steel, 6000 psi 1.22 lbs
FH064-SS4 02600461
zinc plated (420 bar) (0.55 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10G allows flow from port 3 to port 1, while blocking
flow at ports 2 and 4. When coil S1 is energized the spool shifts and allows flow
from port 3 to port 2 and from port 4 to port 1. When coil S2 is energized the
S1 3 1 S2 spool shifts and allows flow from port 3 to port 4 and from port 2 to port 1.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
Features
• Push/pull type manual override button, detented manual override option.
S1
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 6 gpm at 3000 psi (23 l/min at 210 bar)
Consult factory for flow rating above 3000 psi (210 bar)
Internal Leakage 10 cu in/min. at 3000 psi and 158 SUS
S2 (160 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115% of
nominal voltage
Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Minimum Pull-in Current 90% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
4
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
2 Finisher: 02580249
Cartridge Weight 0.64 lbs (0.29 kg)
Coil Weight 0.42 lbs (0.19 kg) - 2 coils required
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Performance
Seal Kits Buna-N FS104-N P/N: 03051912
Measured at 158 SUS (34 cSt)
psi Viton® FS104-V P/N: 03071275
bar T Oil = 115oF (46oC)
10 150
3 4
125 3 2
7.5 2 1
100
Pressure Drop
4 1
3 1
5 750
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
(18.8)
36 = 36 VDC
0.74
(35.1)
AC 24 = 24 VAC
4
(51.3)
3
3.25
Coil Connector
DC DG = EN 175301-803-A
2
0.28
(7.1)
0.94
(24)
ø1.429
(ø36.3)
(S2) (S2)
4.07
S2
0.59
(15)
(122.5)
0.08
(2.0)
4.82
(122.5)
4.82
4
(63.5)
2.5
7/8-14 UNF-2A
1
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.72 lb
FH104-AS8 03038110
anodized (245 bar) (0.33 kg)
Steel, 6000 psi 2.12 lb
FH104-SS8 03037868
zinc plated (420 bar) (0.96 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK06H allows flow to all ports. When coil S1 is energized
the spool shifts and allows flow from port 2 to port 1 and from port 3 to port 4.
When coil S2 is energized the spool shifts and allows flow from port 4 to port 1
S1 3 1 S2 and from port 3 to port 2.
Specifications
Operating Pressure 5000 psi (350 bar), 3000 psi (210 bar) Max Port 1
Nominal Flow See Operating Limits
Internal Leakage 6.0 cu in/min. at 3000 psi and
135 SUS (100 cc/min at 207 bar and 28 cSt)
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
S1 Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current 70% of nominal amperage
to Operate Valve
Fluid Compatibility Mineral-Based or Synthetics with
S2 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582057
Finisher: 02582058
Cartridge Weight 3.6 oz (102 grams)
4 Coil Weight 3.1 oz (88 grams) each (2 required)
Cartridge Material Steel with hardened work surfaces.
3 Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
2 Solid thermoplastic polyester back-up rings.
Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation.
1 Seal Kits Buna-N FS064-N P/N: 02610188
Viton® FS064-V P/N: 02610189
Performance
Measured at 135 SUS (28 cSt)
bar psi Toil = 100° F (38°C)
14 200
3 4; S1 or 2 1; Off or 4 1; Off
12 175
2 1; S1 or 4 1; S2
150
3 1; Off
10 3 2; S2
Pressure Drop
125
8
100
6
75
4
50
2 25
gpm
0 0
0 0.5 1 1.5 2 2.5
l/min
0 2 4 6 8
Flow
0.55
(14)
DC 12 = 12 VDC
(24.1)
0.95
24 = 24 VDC
4
1.34
(34)
AC 115 = 105 VDC (only available with connector DG)
(54.1)
2.13
(All model 32-1329 coils are DC. AC models require an external diode bridge
2 mounted outside the coil)**
0.28
(7.1)
Coil Connector
DG = EN 175301-803-B (IP65 Rated)**
DC DL = Leadwires (2) - 18” long (46 cm) AWG18, TYPE UL 1815
1.0 Thick (IP69K Rated)*
DN = Deutsch DT04-2P intergral molded (IP69K Rated)*
1 (25.4)
Use mating plug EN 175301-803-B without diode bridge for
0.25 1.5 DC voltages P/N 02600570
(6.4) 2.0 (38.1) Use mating plug EN 175301-803-B w/diode bridge for
(50.8) AC voltages P/N 02600582
Coil Model 32-1329
For other coil connector types consult factory
** Mating Plugs sold separately
*Coils with internal transient suppression diode are available, consult factory.
ø1.13
0.33
(8.4)
(ø29)
Operating Limits
Measured at 135 SUS (28 cSt)
1.33 bar psi
S1 Toil = 100° F (38° C)
(33.8) 5000
300
4000
(81.5) Max
3.21 Max
Pressure
200 3000
2000
S2 100
1000 3 2, 4 1, 3 4, 2 1
0 gpm
0.36
(9.1)
0
0 1 2 3
l/min
0 2 4 6 8 10
Flow
0.04
(1.0)
4
(41.7)
3
1.64
ø0.40
1 Standard Line Bodies*
(ø10) ø0.44 Pressure
Code Part No Material Weight
ø0.47 (ø11.2) Rating
(ø11.9) 9/16-18 UNF-2A Aluminum, 3500 psi 0.41 lbs
FH064-AS4 02600462
anodized (245 bar) (0.19 kg)
Steel, 6000 psi 1.22 lbs
FH064-SS4 02600461
zinc plated (420 bar) (0.55 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
When de-energized the WK10H allows flow to all ports. When coil S1 is energized
the spool shifts and allows flow from port 1 to port 2 and from port 3 to port 4.
When coil S2 is energized the spool shifts and allows flow from port 4 to port 1
S1 3 1 S2 and from port 3 to port 2.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
Features
• Push/pull type manual override button, detented manual override option.
S1
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 6 gpm at 3000 psi (23 l/min at 210 bar)
Consult factory for flow rating above 3000 psi (210 bar)
Internal Leakage 10 cu in/min. at 3000 psi and 158 SUS
S2 (160 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115% of
nominal voltage
Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Minimum Pull-in Current 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
4 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3 Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
2 Finisher: 02580249
Cartridge Weight 0.64 lbs (0.29 kg)
Coil Weight 0.42 lbs (0.19 kg) - 2 coils required
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Performance Coil Material Class N high temperature magnet wire,
Measured at 158 SUS (34 cSt) steel shell, polyamid encapsulation.
bar psi T Oil = 115oF (46oC) Seal Kits Buna-N FS104-N P/N: 03051912
10 150 Viton® FS104-V P/N: 03071275
3 1 0
125 2 1 0
7.5 4 1 0
100 3 4 S1
Pressure Drop
3 2 S2
750 4 1 S2
5
2 1 S1
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
Seals
1” HEX N = Buna-N
Torque 28-33 ft-lbs V = Viton®
(Torque 38-45 Nm)
Coil Voltage
0 = No coil, cartridge only
DC 12 = 12 VDC
24 = 24 VDC
(18.8)
36 = 36 VDC
0.74
(35.05)
4 AC 24 = 24 VAC
(82.6)
(51.3)
2.02
Coil Connector
DC DG = EN 175301-803-A
2
(7.1)
0.28
0.95
(24)
ø1.43
(ø36.3)
(S2) (S2)
4.07
S2
0.59
(15)
(122.5)
0.08
(2.0)
4.82
(122.5)
4.82
4
(63.5)
2.5
Operation
When de-energized the WK06J allows flow from cylinder ports 2 and 4 to port 1,
port 3 is blocked. When coil S1 is energized the spool shifts and allows flow from
port 2 to port 1 and from port 3 to port 4. When coil S2 is energized the spool
S1 3 1 S2 shifts and allows flow from port 4 to port 1 and from port 3 to port 2.
Specifications
Operating Pressure 5000 psi (350 bar), 3000 psi (210 bar) Max Port 1
Nominal Flow See Operating Limits
Internal Leakage 11.6 cu in/min. at 3000 psi and
158 SUS (190 cc/min at 250 bar and 34 cSt)
Fluid Operating Temp. Range -20° to 248°F (-29° to 120° C)
S1 Ambient Temperature Range -20° to +140°F (-29° to +60°C)
Coil Duty Rating Continuous from 85% to 115%
of nominal voltage
Current Draw at 68°F (20°C) 984 mA at 12VDC; 492 mA at 24VDC
Min. Pull-in Current 70% of nominal amperage
to Operate Valve
S2 Fluid Compatibility Mineral-Based or Synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC06-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582057
Finisher: 02582058
Cartridge Weight 3.6 oz (102 grams)
4 Coil Weight 3.1 oz (88 grams) each (2 required)
Cartridge Material Steel with hardened work surfaces.
3 Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
2
Coil Material Class N, 200°C high temperature magnet wire,
steel shell, polyester encapsulation.
1 Seal Kits Buna-N FS064-N P/N: 02610188
Viton® FS064-V P/N: 02610189
Performance
12
150 3 2 or 3 4
10
Pressure Drop
4 1
8 2 1
100
6
4
50
2
0 0 gpm
0 1 2 3
l/min
0 1 2 3 4 5 6 7 8 9 10 11
Flow
C = Cartridge only
AS4 = SAE-4 Ports, aluminum body
SS4 = SAE-4 Ports, steel body
Seals
11/16” HEX Torque N = Buna-N
12-15 ft-lbs V = Viton®
(Torque 16-20 Nm) Coil Voltage
0 = No coil, cartridge only
0.55
1.34 (14)
DC 12 = 12 VDC
(24.1)
0.95
24 = 24 VDC
4 AC 115 = 105 VDC (only available with connector DG)
(34) 230 = 205 VDC (only available with connector DG)
(54.1)
2.13
3 (All model 32-1329 coils are DC. AC models require an external diode bridge
mounted outside the coil)**
2
(66.8)
2.63
0.28
Coil Connector
(7.1)
(ø29) *Coils with internal transient suppression diode are available, consult factory.
Operating Limits
1.33
S1 (33.8)
(81.5) Max
3.21 Max
300
4000
S2 250
Pressure
200 3000
150
2000
0.36
(9.1)
100
1000 3 2 4 1
0.04
50 3 4 2 1
(1)
4 0 0
0 1 2 3
gpm
(41.7)
1.64
l/min
3 0 2 4
Flow
6 8 10 12
ø0.40
1
(ø10) ø0.44
ø0.47 (ø11.2)
(ø11.9) 9/16-18 UNF-2A
Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.41 lbs
FH064-AS4 02600462
anodized (245 bar) (0.19 kg)
Steel, 6000 psi 1.22 lbs
FH064-SS4 02600461
zinc plated (420 bar) (0.55 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Hydraulic Symbol
2 4
S1
S1 3 1 S2
Description
A screw-in cartridge, solenoid operated, 4-way, 3 position, direct acting, spool
type valve.
S2
Operation
When de-energized the WK08J allows flow from cylinder ports 2 and 4 to port 1,
port 3 is blocked. When coil S1 is energized the spool shifts and allows flow from
port 2 to port 1 and from port 3 to port 4. When coil S2 is energized the spool
shifts and allows flow from port 4 to port 1 and from port 3 to port 2.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
4
Features
• Push/pull type manual override button, detented manual override option.
3 • High flow capacity
2 Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 5 gpm at 3000 psi (20 l/min@ 210 bar)
1 Internal Leakage 10 cu in/min. at 3000 psi and
158 SUS (160 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 140°F (-29° to 60°C)
Performance Coil Duty Rating Continuous from 85% to 115% of
Measured at 135 SUS (28 cSt)
bar psi Toil = 100°F (38°C) nominal voltage
140
Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
8 120 3 2 Minimum Pull-in Current 75% of nominal amperage
100
3 4 Typical Response Time On: 30 to 60 ms
6
4 1 (Varies with Pressure and Flow) Off: 20 to 40 ms
Pressure
0 5 10 15 20
l/min Cavity Tools Rougher: 02580088
Flow Finisher: 02580089
Operating Limits Cartridge Weight 0.6 lbs (0.27 kg)
Measured at 135 SUS (28 cSt) Coil Weight 2 x 0.42 lbs (2 x 0.19 kg)
bar psi Toil = 100°F (38°C)
6000 Cartridge Material Steel with hardened work surfaces.
400
Zinc plated solenoid tube surface.
5000 Buna N or Viton® o-rings.
300
4000
Solid thermoplastic polyester back-up rings.
Coil Material Class N high temperature magnet wire,
Pressure
3 2
3000
200 2 4
steel shell, polyamid encapsulation.
4 1
2000 Seal Kits Buna-N FS084-N P/N: 03071272
100 Viton® FS084-V P/N: 03071273
1000
0 0
0 1 2 3 4 5 6 gpm
0 5 10 15 20 l/min
Flow
ø1.43
(ø36.3) 1.05
(26.6)
(S2) (S2)
(103.1)
(122.5)
4.06
4.82
(122.5)
4.82
S2
(12.9)
0.51
(14.9)
0.59
ø0.91
(ø23.1)
4
(54.1)
2.13
3
2
Operation
When de-energized the WK10J allows flow from cylinder ports 2 and 4 to port 1,
port 3 is blocked. When coil S1 is energized the spool shifts and allows flow from
port 1 to port 2 and from port 3 to port 4. When coil S2 is energized the spool
S1 3 1 S2 shifts and allows flow from port 4 to port 1 and from port 3 to port 2.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
Features
• Push/pull type manual override button, detented manual override option.
S1
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 6 gpm at 3000 psi (23 l/min at 210 bar)
Consult factory for flow rating above 3000 psi (210 bar)
Internal Leakage 10 cu in/min. at 3000 psi and 158 SUS
(160 cc/min at 210 bar and 34 cSt)
S2
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115% of
nominal voltage
Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Minimum Pull-in Current 90% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
4 Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation No orientation restrictions
3
Cavity FC10-4 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580248
2 Finisher: 02580249
Cartridge Weight 0.64 lbs (0.29 kg)
Coil Weight 0.42 lbs (0.19 kg) - 2 coils required
1 Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Coil Material Class H high temperature magnetwire,
steel shell, polyamid encapsulation.
Performance
Seal Kits Buna-N FS104-N P/N: 03051912
Measured at 158 SUS (34 cSt)
psi Viton® FS104-V P/N: 03071275
bar T Oil = 115oF (46oC)
10 150
125 3 2
3 4
7.5 4 1
100
Pressure Drop
2 1
5 750
50
2.5
25
0 0 gpm
0 1 2 3 4 5 6
l/min
0 5 10 15 20
Flow
(18.8)
0.74
(35.05)
AC 24 = 24 VAC
4 115 = 115 VAC
(82.6)
3.25
Coil Connector
3
2.83
(72)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
2
0.28
(7.1)
ø1.43
(ø36.3) 0.95
(24)
(S2) (S2)
(122.5)
4.82
(122.5)
4.82
S2
0.59
(15) 0.08
(2.0)
4
(63.5)
2.5
Operation
When de-energized the WK10T allows flow from cylinder ports 2 and 4 to port 1,
port 3 is blocked. When coil S1 is energized the spool shifts and allows flow from
S1 3 1 S2 port 3 to port 2 and port 4. When coil S2 is energized the spool shifts and allows
flow from port 3 to port 2 and from port 4 to port 1.
Operation of Manual Override Option: To override, twist knurled screw and
push or pull to shift spool.
Detented version - twist again after pushing/pulling to hold position.
Features
S1 • Push/pull type manual override button, detented manual override option.
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 6 gpm at 3000 psi (23 l/min at 210 bar)
Consult factory for flow rating above 3000 psi (210 bar)
S2 Internal Leakage 10 cu in/min. at 3000 psi and 158 SUS
(160 cc/min at 210 bar and 34 cSt)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Coil Duty Rating Continuous from 85% to 115% of
nominal voltage
Current Draw at 68°F (20°C) 1.5 A at 12VDC; 0.8 A at 24VDC
Minimum Pull-in Current 85% of nominal @ 5000 psi (350 bar)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
4 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
3
Installation No orientation restrictions
Cavity FC10-4 (see Line Bodies & Cavities section)
2 Cavity Tools Rougher: 02580248
Finisher: 02580249
Cartridge Weight 0.64 lbs (0.29 kg)
1 Coil Weight 0.42 lbs (0.19 kg) - 2 coils required
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Performance Coil Material Class N high temperature magnet wire,
steel shell, polyamid encapsulation.
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C) Seal Kits Buna-N FS104-N P/N: 03051912
14 200 Viton® FS104-V P/N: 03071275
12 175 3 2 S2
4 1
150 3 2 S1
10
3 4
125
Pressure Drop
8
100
6
75
4
50
2 25
0 0 gpm
0 1 2 3 4 5 6 7 8 9
l/min
0 5 10 15 20 25 30 35
Flow Rate
(18.8)
0.74
(35.05)
AC 24 = 24 VAC
4 115 = 115 VAC
(82.6)
3.25
Coil Connector
3
2.83
(72)
DC DG = EN 175301-803-A
DS = Dual spade (SAEJ858a)*
DL = Leadwires (2) - 18” long (46 cm)*
2
0.28
(7.1)
ø1.43
(ø36.3) 0.95
(24)
(S2) (S2)
S2
0.59
(15)
(122.5)
4.82
(122.5)
4.82
0.08
(2.0)
4
(63.5)
2.5
Overview
HYDAC offers several functions of the Directional Control Cartridges.
• HYDAC Manually operated 2 position, 2- way normally closed, spring
return, directional valve features poppet design. It offers bi-directional
load holding and low internal leakage. Models are available for flows up
to 5 gpm (20 lpm) with pressure rating up to 3600 psi (250 bar)
• HYDAC Piloted 3-way hydraulically operated spool type directional
valve used for functions requiring remote pilot actuation. Models are
available for flow rates up to 70 gpm (265 lpm) with pressure rating up to
5000 psi (350 bar).
Features
• Hardened spool or poppet to
ensure extended service life.
• All external surfaces zinc-plated
Operation
The WS08WM-01 blocks flow , leakfree, in both directions until an operator
pushes the button against the bias spring and opens the flow path between
1 port 2 to port 1 bi-directionally. The flow path will be open as long as the plastic
button is pushed down.
Features
• Both ports could be fully pressurized
• Easy to operate manually
• Spring return
• Push type manual override button, protected by rubber cap
Specifications
Operating Pressure 3600 psi (250 bar)
Nominal Flow 5 gpm (20 l/min)
Internal Leakage Leaktight, less than 5 drops/min. at 3600 psi
(0.25 cc/min at 250 bar)
Required Push Force 9 to 15 Lbs (40 to 70 N)
depending on operating pressure
Fluid Operating Temp Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Fluid Compatibility Mineral-Based or synthetics with
lubricating properties.
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
2 Filtration 21/19/16 or cleaner per (ISO 4406)
Use with filter rated ß10 ≥ 200
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Cartridge Weight 0.19 lbs (0.09 kg)
1 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
PTFE back-up rings.
Seal Kits Buna-N FS082-N P/N: 03033920
Viton® FS082-V P/N: 03051756
Performance
Measured at 158 SUS (34 cSt)
bar psi Toil = 115°F (46°C)
14
200
12
2 1
1 2
10 150
Pressure Drop
8
100
6
4
50
0 0 gpm
0 1 2 3 4 5
l/min
0 5 10 15 20
Flow Rate
(18.8)
0.74
1.50
(38)
2
(50)
2.0
0.28
(7.1)
1.13 Thick
(28.7)
1
0.13 1.62
(3.3) (41.1)
2.0
(50)
0.08
(2.0)
(28)
2
1.1
1
ø0.5
(ø12.7)
3/4-16UNF-2A
Specifications
Operating Pressure 5000 psi (350 bar)
Nominal Flow 70 gpm (265 l/min) at 100 psi (7 bar) ∆P
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Ambient Temperature Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-Based or synthetics with
lubricating properties.
5 Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FCM45-5 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02582020
4 Finisher: 02582021
Cartridge Weight 2.31 lbs (1.05 kg)
Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
3 PTFE back-up rings.
Seal Kits Buna-N FSM455-N P/N: 02610313
Viton® FSM455-V P/N: 02610314
2
Performance
Measured at 135 SUS (28 cSt)
bar psi TOil = 100°F (38°C)
120
8
100
6 3 2 or 3 4
Pressure Drop
80
4 60
40
2
20
0 0
0 10 20 30 40 50 60 70 80 gpm
1.26
(32)
Seals
(12.7)
0.50
N = Buna-N
5 V = Viton®
2.44
(62)
(91.9)
Bias Spring*
3.62
(181.1)
150 = 150 psi
7.13
*Consult factory for alternative bias springs.
4
(121.9)
4.80
(165.1)
6.50
3
2x ø0.406
2 (ø10.3)
(12.7)
(76.2) 2.25
4.50 (57.2)
(114.3)
ø1.98
0.67
(17)
(ø50.3)
M45 x 2.0-6f
0.27
(6.8)
5
ø1.57
4 (ø40)
(142.2)
5.60
ø1.49
3 (ø38)
2 ø1.42
(ø36)
1
ø1.34
(ø34)
Overview
HYDAC offers a wide range of Electrically Operated Proportional
Pressure Relief Valves and Pressure Reducing/Relieving Valves.
These proportional valves vary the output pressure in response to a variable
electric input.
HYDAC electrically controlled, pilot operated proportional pressure relief
valves are available with pressure ranges up to 5000 psi (350 bar). Models
are available for flow rates up to 79 gpm (300 lpm).
HYDAC electrically controlled, direct acting and pilot operated proportional
pressure reducing/relieving valves are available with pressure ranges from
200 psi (14 bar) up to 5000 psi (350 bar). Models are available for flow rates
up to 16 gpm (60 lpm). Pressure control valves can be used to regulate the
pressure applied to hydraulic actuators.
Electric current controls with PWM are recommended to be used for
HYDAC Proportional Valves.
Features
• Wet armature construction
• Hardened operating parts to ensure
minimal wear and extend service life
• One piece cartridge body design to
maximize reliability
• Screen on pilot orifice to enhance
safety
• Excellent stability throughout flow
range
• Proportional water/weather resistant
coils rated up to IP69K
• Continuous duty rated coils
• Optional coil voltages and molded-in
connectors
• Air bleed screws
• All exposed cartridge surfaces zinc-
plated to resist corrosion
• Industry common cavity
• Compact size
• Wide voltage range
• Cartridges are voltage
interchangeable
• Low pressure drop
Operation
The PDB08P-01 blocks flow from port 1 to port 2 until sufficient pressure is
reached at port 1 to open the pilot stage by offsetting the electrically induced
2 solenoid force. The pilot stage opens and allows flow from the back of the main
piston to port 2. The resulting pressure imbalance causes the main spool to move
against the return spring and allows flow from port 1 to port 2.
Electrical current increase will increase the relief pressure setting. With no current
applied to the solenoid, the valve will relieve at approximately 75 psi.
Features
• Excellent stability throughout flow range
• 12 and 24 volt proportional waterproof coils
• Screen on pilot orifice to enhance safety
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 16 gpm (60 l/min)
Maximum Pilot Flow 3.75 cu in/min. (0.5 l/min)
Relieving Pressure Ranges 75 to 870 psi (5 to 60 bar)
(0 to maximum control current) 75 to 3300 psi (5 to 230 bar)
75 to 5000 psi (5 to 350 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 50 ms, OFF: approx. 30 ms
Repeatability <= 1.5% of maximum pressure range
Reversal Span <= 2% of maximum
Response Sensitivity <= 1% of maximum control current
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
2 Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
1 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 18/16/13 or cleaner (per ISO 4406)
Use with filter rated ß3 ≥ 200.
Installation No orientation restrictions
Cavity FC08-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580090
Finisher: 02580091
Performance Cartridge Weight 0.44 Lbs. (0.20 kg)
Measured at 158 SUS (34 cSt)
TOil = 115°F (46°C) Coil Weight 0.42 Lbs. (0.19 kg)
125 Cartridge Material Steel with hardened work surfaces.
% of Maximum Relieving Pressure
25
0
10 20 30 40 50 60 70 80 90 100
% of Maximum Control Current
Seals
(83.1)
N = Buna-N
3.27
V = Viton®
(86.1 Max.)
Pressure Range
87 = 75 to 870 psi (5 to 60 bar)
330 = 75 to 3300 psi (5 to 230 bar)
7/8” HEX 500 = 75 to 5000 psi (5 to 350 bar)
Torque 18.5-22 ft-lbs
(Torque 25-30 Nm) Coli Voltage
0 = No coil, cartridge only
12 = 12 VDC
24 = 24 VDC
(15.2)
0.60
Coil Connector
PG = EN 175301-803-A
(38)
1.5
5000
Torque 1.8-2.2 ft-lbs
300
(Torque 2.5-3 Nm) 4000
75 % Max. Control Current
200 3000
50 % Max. Control Current
2000
100
1000
No Control Current
3.43 (without Manual Override)
0 0 gpm
0 2 4 6 8 10 12 14
0 5 10 15 20 25 30 35 40 45 50 55 60 l/min
(98.8)
3.89
Flow
(84.1)
3.31
(87.1)
(26.3)
1.04
0.08
(2)
1.10
(28)
1 ø 0.50
(ø 12.7)
3/4-16 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.34 lb
FH082-AS6 03011409
anodized (245 bar) (0.15 kg)
Steel, 6000 psi 1.0 lb
FH082-SS6 00560917
zinc plated (420 bar) (0.45 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The PDB10P-01 blocks flow from port 1 to port 2 until sufficient pressure is
reached at port 1 to open the pilot stage by offsetting the electrically induced
2 solenoid force. The pilot stage opens and allows flow from the back of the main
piston to port 2. The resulting pressure imbalance causes the main spool to move
against the return spring and allows flow from port 1 to port 2.
Electrical current increase will increase the relief pressure setting. With no current
applied to the solenoid, the valve will relieve at approximately 75 psi.
Features
• Excellent stability throughout flow range
• 12 and 24 volt proportional waterproof coils
• Screen on pilot orifice to enhance safety
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 31 gpm (120 l/min)
Maximum Pilot Flow 3.75 cu in/min. (0.5 l/min)
Relieving Pressure Ranges 75 to 870 psi (5 to 60 bar)
(0 to maximum control current) 75 to 3300 psi (5 to 230 bar)
75 to 5000 psi (5 to 350 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 50 ms, OFF: approx. 30 ms
Repeatability <= 1.5% of maximum pressure range
Reversal Span <= 2% of maximum
Response Sensitivity <= 1% of maximum control current
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
2 Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
1 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 18/16/13 or cleaner (per ISO 4406)
Use with filter rated ß3 ≥ 200.
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Performance Cartridge Weight 0.57 Lbs. (0.26 kg)
Measured at 158 SUS (34 cSt)
TOil = 115°F (46°C)
Coil Weight 0.42 Lbs. (0.19 kg)
125
Cartridge Material Steel with hardened work surfaces.
% of Maximum Relieving Pressure
25
0
10 20 30 40 50 60 70 80 90 100
% of Maximum Control Current
Seals
(81.1)
3.19
N = Buna-N
(84.3 Max.)
V = Viton®
Pressure Range
1” HEX 87 = 75 to 870 psi (5 to 60 bar)
Torque 33-40.5 ft-lbs 330 = 75 to 3300 psi (5 to 230 bar)
(Torque 45-55 Nm) 500 = 75 to 5000 psi (5 to 350 bar)
Coli Voltage
0 = No coil, cartridge only
(18.8)
0.74
12 = 12 VDC
24 = 24 VDC
(38.1)
1.5
Coil Connector
0.28
(7.1)
PG = EN 175301-803-A
2
2.13
(55)
3000
200 75 % Max. Control Current
2000
100
1000
3.34 (without Manual Override)
No Control Current
0 0 gpm
(94.6)
3.72
0 5 10 15 20 25 30
l/min
0 20 40 60 80 100 120
(81.6)
3.21
Flow
(84.8)
0.95
0.08
(2)
(2)
1.30
(33)
ø 0.63
1
(ø 15.88) 7/8-14 UNF-2A
ø 0.95
(ø 24) Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lb
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lb
FH102-SS8 03037612
zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The PDB12P-01 blocks flow from port 1 to port 2 until sufficient pressure is
reached at port 1 to open the pilot stage by offsetting the electrically induced
2 solenoid force. The pilot stage opens and allows flow from the back of the main
piston to port 2. The resulting pressure imbalance causes the main spool to move
against the return spring and allows flow from port 1 to port 2.
Electrical current increase will increase the relief pressure setting. With no current
applied to the solenoid, the valve will relieve at approximately 25 psi.
Features
• Excellent stability throughout flow range
• 12 and 24 volt proportional waterproof coils
• Screen on pilot orifice to enhance safety
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 53 gpm (200 l/min)
Maximum Pilot Flow 3.75 cu in/min. (0.5 l/min)
Relieving Pressure Ranges 75 to 870 psi (5 to 60 bar)
(0 to maximum control current) 75 to 3300 psi (5 to 230 bar)
75 to 5000 psi (5 to 350 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 50 ms, OFF: approx. 30 ms
Repeatability <= 1.5% of maximum pressure range
Reversal Span <= 2% of maximum
Response Sensitivity <= 1% of maximum control current
2 Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
1 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 18/16/13 or cleaner (per ISO 4406)
Use with filter rated ß3 ≥ 200.
Installation No orientation restrictions
Cavity FC12-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580668
Finisher: 02580667
Performance Cartridge Weight 0.70 Lbs. (0.32 kg)
Measured at 158 SUS (34 cSt)
TOil = 115°F (46°C) Coil Weight 0.42 Lbs. (0.19 kg)
125
Cartridge Material Steel with hardened work surfaces.
% of Maximum Relieving Pressure
25
0
10 20 30 40 50 60 70 80 90 100
% of Maximum Control Current
Seals
2.9
N = Buna-N
(76.6 Max.)
(26.55)
1.05
0 = No coil, cartridge only
12 = 12 VDC
24 = 24 VDC
(57.2)
2.25
2 Coil Connector
PG = DIN 175301-803
(76.5)
0.34
2000
50% Max. Control Current
2.06 (without Manual Override)
100
1000
No Control Current
(89.3)
3.52
0 0 gpm
0 10 20 30 40 50
l/min
0 20 40 60 80 100 120 140 160 180 200
Flow
(77.6)
(16.8)
0.08
0.66
(2)
1.81
(46)
1
ø0.88
(ø22.2)
1 1/16-12 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lb
FH122-AS12 03053845
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lb
FH122-SS12 03053772
zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The PDB16P-01 blocks flow from port 1 to port 2 until sufficient pressure is
reached at port 1 to open the pilot stage by offsetting the electrically induced
2 solenoid force. The pilot stage opens and allows flow from the back of the main
piston to port 2. The resulting pressure imbalance causes the main spool to move
against the return spring and allows flow from port 1 to port 2.
Electrical current increase will increase the relief pressure setting. With no current
applied to the solenoid, the valve will relieve at approximately 90 psi.
Features
• Excellent stability throughout flow range
• 12 and 24 volt proportional waterproof coils
• Screen on pilot orifice to enhance safety
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 79 gpm (300 l/min)
Maximum Pilot Flow 3.75 cu in/min. (0.5 l/min)
Relieving Pressure Ranges 90 to 870 psi (6 to 60 bar)
(0 to maximum control current) 90 to 3300 psi (6 to 230 bar)
90 to 5000 psi (6 to 350 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 50 ms, OFF: approx. 30 ms
Repeatability <= 1.5% of maximum pressure range
Reversal Span <= 2% of maximum
Response Sensitivity <= 1% of maximum control current
2 Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
(Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
1 lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 18/16/13 or cleaner (per ISO 4406)
Use with filter rated ß3 ≥ 200.
Installation No orientation restrictions
Cavity FC16-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580251
Performance Finisher: 02580250
Cartridge Weight 1.23 Lbs. (0.56 kg)
Measured at 158 SUS (34 cSt)
TOil = 115°F (46°C) Coil Weight 0.51 Lbs. (0.23 kg)
125
Cartridge Material Steel with hardened work surfaces.
% of Maximum Relieving Pressure
25
0
10 20 30 40 50 60 70 80 90 100
% of Maximum Control Current
(87.1)
Seals
3.43
N = Buna-N
V = Viton®
(90.17 Max.)
Pressure Range
1 1/2” HEX 87 = 90 to 870 psi (6 to 60 bar)
Torque 96-133 ft-lbs 330 = 90 to 3300 psi (6 to 230 bar)
(Torque 130-180 Nm) 500 = 90 to 5000 psi (6 to 350 bar)
Coli Voltage
0 = No coil, cartridge only
(25.1)
12 = 12 VDC
0.99
24 = 24 VDC
Coil Connector
(57.2)
2.25
PG = EN 175301-803-A
2 PL = Leadwires (2) - 18” long (46 cm)
(76.5)
3.0
Relieving Pressure
200 3000
75% Max. Control Current
(102.3)
4.03
2000
50% Max. Control Current
100
1000
No Control Current
(90.6)
0 gpm
0 0 10 20 30 40 50 60 70 80
l/min
0 50 100 150 200 250 300
(29.8)
1.17
Flow
0.08
(2.0) (47.5)
1.87
1
ø 1.13
(ø 28.6)
1 5/16-12 UNF-2A Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 1.2 lb
FH162-AS16 03037195
anodized (245 bar) (0.55 kg)
Steel, 6000 psi 3.56 lb
FH162-SS16 03032655
zinc plated (420 bar) (1.62 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
1 Operation
When de-energized the PDR08-01 allows flow from port 1 (reduced pressure
port) to port 3 (tank). Port 2 (inlet) is blocked. When current signal is applied,
the solenoid armature moves the control spool and sets the control (reduced)
pressure at port 1. Increasing the current applied will increase the reduced
pressure proportionally. Port 3 is vented to tank. Back pressure on port 3 is
directly additive to the pressure setting.
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 3 gpm (12 l/min)
Flow Path De-energized: Free flow, 1 to 3
Energized: Reduced, 2 to 1; Relieving, 1 to 3
Internal Leakage 3.75 cu in/min. at 5000 psi and 158 SUS
(55 cc/min at 350 bar and 34 cSt)
Reducing/Relieving 0 to 200 psi (0 to 14 bar)
Pressure Ranges 0 to 300 psi (0 to 20 bar)
(0 to maximum control current) 0 to 500 psi (0 to 35 bar)
0 to 700 psi (0 to 48 bar)
0 to 1100 psi (0 to 75 bar)
0 to 2000 psi (0 to 138 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
3 Typical Step Response Time ON: approx 40 ms, OFF: approx. 30 ms
Repeatability <= 2% of maximum pressure range
Reversal Span <= 2% of maximum
2 Response Sensitivity <= 1% of maximum control current
Ambient Temperature Range -4° to 140°F (-20° to +60°C)
Fluid Operating Temp. Range -4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
1 Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß3 ≥ 200.
Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580086
Performance Finisher: 02580087
Measured at 158 SUS (34 cSt) Cartridge Weight 0.38 Lbs. (0.17 kg)
Toil = 115°F (46°C)
125 Coil Weight 0.42 Lbs. (0.19 kg)
Cartridge Material Steel with hardened work surfaces.
100 Zinc-plated exposed surfaces.
Regulating Pressure
0
30 40 50 60 70 80 90 100
% of Maximum Control Current
C = Cartridge only
2.75
(15.2)
0.6
Pressure Range
1.18
(30)
0.28
(7.1)
2.62
(10.1)
0.4
(70.9)
Performance
Measured at 158 SUS (34 cSt)
bar
psi Toil = 115°F (46°C)
20
0.08
(2.0)
Body only
15
2
80
10 60
1 ø0.56
40
(ø14.27)
5
ø 0.62 20
(ø 15.88)
3/4-16 UNF-2A 0 0 gpm
0 1 2 3
3 6 l/min
0 9 12
Flow Rate
bar
psi
20
100% Control Current
75% Control Current
All measurements in inches (mm). 250 50% Control Current
Subject to technical modifications
Regulating Pressure
No Control Current
15
200
Pressure 100
Code Part No Material Weight
Rating 5
Aluminum, 3500 psi 0.58 lb 50
FH083-AS6 03011424
anodized (245 bar) (0.26 kg)
0 0 gpm
Steel, 6000 psi 1.70 lb -3 -2 -1 0 1 2 3
FH083-SS6 00560920 l/min
zinc plated (420 bar) (0.77 kg) -12 -6 0 6 12
Relieving Reducing
*Please refer to Line Bodies & Cavities section for details Flow Rate
1
Operation
The PDR08P-01 allows flow from port 2 to port 1 until sufficient pressure is
reached at port 1 to open the pilot section by offsetting the electrically induced
solenoid force. Increasing electrical current will increase the control (reduced)
pressure at port 1. Any pressure on port 3 is additive to the pressure setting.
With no current applied to the solenoid, the valve will maintain pressure at
approximately 75 psi, regardless of the pressure at port 2.
Features
• Screen on pilot orifice to enhance safety
• 12 and 24 volt proportional waterproof coils
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 16 gpm (60 l/min)
Flow Path De-energized: 1 to 2 & 2 to 1
Energized: 2 to 1; Relieving: 1 to 3
Maximum Pilot Flow 3.75 cu in/min. at 5000 psi
(0.5 l/min at 350 bar)
Reducing/Relieving 75 to 870 psi (5 to 60 bar)
Pressure Ranges 75 to 3300 psi (5 to 230 bar)
(0 to maximum control current) 75 to 5500 psi (5 to 350 bar)
Maximum Control Current 2.1 amps for 12VDC coil (2.2 Ohms)
1.05 amps for 24VDC coil (8.8 Ohms)
Dither Frequency 160 to 250 Hz
3 Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 60 ms, OFF: approx. 40 ms
Repeatability <= 1.5% of maximum pressure range
2 Reversal Span <= 2% of maximum
Response Sensitivity <= 1% of maximum control current
Ambient Temperature Range -4° to 140°F (-20° to 60°C)
Fluid Operating Temp. Range -4° to 248°F (-20° to 120°C)
1 (Consult factory for usage at temp. outside range.)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 18/16/13 or cleaner (per ISO 4406)
Use with filter rated ß3 ≥ 200.
Installation No orientation restrictions
Cavity FC08-3 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580086
Performance Finisher: 02580087
Measured at 158 SUS (34 cSt)
Cartridge Weight 0.57 Lbs. (0.26 kg)
Toil = 115°F (46°C) Coil Weight 0.42 Lbs. (0.19 kg)
125
Cartridge Material Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Regulating Pressure
25
0
20 30 40 50 60 70 80 90 100
% of Maximum Control Current
(15.2)
0.60
87 = 75 to 870 psi (5 to 60 bar)
1.18
Coli Voltage
(66.2)
0.28
(7.1)
1.13 Thick
(30) 12 = 12 VDC
24 = 24 VDC
Coil Connector
PG = EN 175301-803-A
1 2.0
PL = Leadwires (2) - 18” long (46 cm)
PN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)
(50.8) PT = Amp Junior Timer™, molded, radial mount
2.5
(60) Coil Resistance
2.2 = 2.2 Ohms (12 VDC)
Manual Override 8.8 = 8.8 Ohms (24 VDC)
(Emergency pressure adjustment)
Torque 7.4-8.1 ft-lbs Coil Model P-40-1836
(Torque 10-11 Nm) Air Bleed screw For other coil connector types consult factory
Torque 1.8-2.2 ft-lbs
(Torque 2.5-3 Nm)
3.39 (without Manual Override)
(99.8)
3.93
Performance
Measured at 158 SUS (34 cSt)
bar
(86)
0.08
40
(2)
30
400
3
(40.7)
1.60
20 300
2
200
10
ø 0.56
1 100
psi bar
All measurements in inches (mm). 350
Subject to technical modifications 5000
300
Regulating Pressure
1
Operation
The PDR10P-01 allows flow from port 2 to port 1 until sufficient pressure is
reached at port 1 to open the pilot section by offsetting the electrically induced
solenoid force. Increasing electrical current will increase the control (reduced)
pressure at port 1. Any pressure on port 3 is additive to the pressure setting.
With no current applied to the solenoid, the valve will maintain pressure at
approximately 90 psi, regardless of the pressure at port 2.
Features
• Screen on pilot orifice to enhance safety
• 12 and 24 volt proportional waterproof coils
• Manual override option
Specifications
Operating Pressure 5000 psi (350 bar) max at port 2
Nominal Flow 21 gpm (80 l/min)
De-energized: 1 to 2 & 2 to 1
Flow Path
Energized: 2 to 1; Relieving: 1 to 3
3.75 cu in/min. at 5000 psi
Maximum Pilot Flow
(0.5 l/min at 350 bar)
90 to 870 psi (6 to 60 bar)
Reducing/Relieving
90 to 2600 psi (6 to 180 bar)
Pressure Ranges
90 to 3300 psi (6 to 230 bar)
(0 to maximum control current)
90 to 5000 psi (6 to 350 bar)
2.1 amps for 12VDC coil (2.2 Ohms)
Maximum Control Current
1.05 amps for 24VDC coil (8.8 Ohms)
3 Dither Frequency 160 to 250 Hz
Hysteresis With Dither 2-4% of maximum control current
Typical Step Response Time ON: approx 60 ms, OFF: approx. 40 ms
Repeatability <= 1.5% of maximum pressure range
2 Reversal Span <= 2% of maximum
Response Sensitivity <= 1% of maximum control current
Ambient Temperature Range -4° to 140°F (-20° to +60°C)
-4° to 248°F (-20° to +120°C)
1 Fluid Operating Temp. Range
(Consult factory for usage at temp. outside range.)
Mineral-based or synthetics with
Fluid Compatibility
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
18/16/13 or cleaner (per ISO 4406)
Filtration
Use with filter rated ß3 ≥ 200.
Installation No orientation restrictions
Cavity FC10-3 (see Line Bodies & Cavities section)
Rougher: 02580092
Performance Cavity Tools
Finisher: 02580093
Measured at 158 SUS (34 cSt) Cartridge Weight 0.57 Lbs. (0.26 kg)
Toil = 115°F (46°C)
125 Coil Weight 0.51 Lbs. (0.23 kg)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Regulating Pressure
25
0
20 30 40 50 60 70 80 90 100
% of Maximum Control Current
C = Cartridge only
AS8 = SAE-8 ports, aluminum body
(80.6)
3.17 SS8 = SAE-8 ports, steel body
(83.5 Max.)
Seals
1” HEX N = Buna-N
Torque 29.5-37 ft-lbs V = Viton®
(Torque 40-50 Nm)
Pressure Range
87 = 90 to 870 psi (6 to 60 bar)
18.3
(.72)
260 = 90 to 2600 psi (6 to 180 bar)
1.38
2 Coli Voltage
(66.5)
2.62
12 = 12 VDC
24 = 24 VDC
Coil Connector
1.25 Thick PG = EN 175301-803-A
0.20 2.0 1 (32) PL = Leadwires (2) - 18” long (46 cm)
(5) (50.8) PN = Deutsch™ DT04-2P, molded, axial (IP69K Rated)
2.5 PT = Amp Junior Timer™, molded, radial mount
(60)
Manual Override Coil Resistance
(Emergency pressure adjustment) 2.2 = 2.2 Ohms (12 VDC)
Torque 7.4-8.1 ft-lbs ø1.43 8.8 = 8.8 Ohms (24 VDC)
(Torque 10-11 Nm) (ø36.3) Coil Model P-40-1836
0.95 Air Bleed Screw
(24) For other coil connector types consult factory
Torque 1.8-2.2 ft-lbs
(Torque 2.5-3 Nm)
3.32 (withoit Manual Override)
(94.1)
3.7
(81.1)
3.19
Performance
(23.5)
0.93
50 700
0.08
(2)
3 300
1.85
(47)
20
200
3 10
100
0 0
1 ø0.63 0 5 10 15 20 gpm
(ø15.88) l/min
0 10 20 30 40 50 60 70 80
ø0.69 Flow
(ø17.48)
7/8-14UNF-2A
psi bar
350
5000
300
Regulating Pressure
1000 50
Pressure
Code Part No Material Weight No Control Current
Rating 0 0
-20 -15 -10 -5 0 5 10 15 20
gpm
l/min
Aluminum, 3500 psi 0.60 lb -80 -60 -40 -20 0 20 40 60 80
FH103-AS8 03038095 Relieving Reducing
anodized (245 bar) (0.27 kg) Flow rate
Steel, 6000 psi 1.74 lb
FH103-SS8 03037704
zinc plated (420 bar) (0.79 kg)
*Please refer to Line Bodies & Cavities section for details
Overview
HYDAC offers two types of the Hand Pump valves.
• MP10-01 screw in cartridge valve, push type
• MP10-02 screw in cartridge valve, push type with the collar to bolt
mount to the block for orientation
Features
• Built in suction and outlet checks provide for compact device in one
cavity
• Heavy duty construction
• Handle rotates 360 deg
• All external cartridge surfaces zinc plated to resist corrosion
• Industry common cavity
Operation
The MP10-01 provides hydraulic flow up to 0.45 cu. in. (7.5 cc) per stroke, at 3000
psi (207 bar). Internal suction and outlet checks provide a compact device. See
performance Chart for handle torque requirements.
1 Features
• Hardened parts for long life
• Heavy duty construction
• Handle rotates 350°
• Push linkage standard
• All external surfaces zinc-plated
• Industry common cavity
• Handle socket sized for 1/2” (0.840 O.D.) pipe
• Arc angle 45°
Specifications
Operating Pressure 3000 psi (207 bar)
Nominal Flow per 45° Stroke 0.46 cubic inches (7.5cc)
Leakage 5 drops per minute (Outlet Check)
Suction Pressure 11 in. Hg (5.4 psi) less than
atmospheric pressure
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 1.75 lbs (0.80 kg)
Cartridge Material Steel with hardened work surfaces.
2 Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
1 Seal Kits Buna-N
Viton®
FS102-N
FS102-V
P/N: 03033872
P/N: 03051757
Performance
bar psi
3000
200
2500
150
2000
Pressure
100 1500
1000
50
500
0 0 Ft-lbs
0 20 40 60 80 100 120
Nm
0 20 40 60 80 100 120 140 160
1.25” HEX
Torque 30-35 ft-lbs
(40-47 Nm)
2.91
(73.9)
Inside ø 0.88
(22.2)
(122.9)
4.84
1.25 HEX.
(31.8)
ø1.63
(ø41.3)
(32.1)
1.27
2
1.52
(38.6)
1
ø0.62
(ø15.7)
7/8-14 UNF-2A
ø1.06
(ø26.9) Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lb
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lb
FH102-SS8 03037612
zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
Operation
The MP10-02 provides hydraulic flow up to 0.45 cu. in. (7.5 cc) per stroke, at 3000
psi (207 bar). Internal suction and outlet checks provide a compact device. See
performance Chart for handle torque requirements.
1 Features
• Hardened parts for long life
• Heavy duty construction
• Handle rotates 360° and can be fixed
• Push linkage standard
• Optional collar to bolt mount to the block for orientation
• All external surfaces zinc-plated
• Industry common cavity
• Arc angle 45°
• Handle socket sized for 1/2” (0.840 O.D.) pipe
Specifications
Operating Pressure 3000 psi (207 bar)
Nominal Flow per 45° Stroke 0.46 cubic inches (7.5cc)
Leakage 5 drops per minute (Outlet Check)
Suction Pressure 11 in. Hg (5.4 psi) less than
atmospheric pressure
Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C)
Fluid Compatibility Mineral-based or synthetics with
lubricating properties
Viscosity 50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner per (ISO 4406)
Installation No orientation restrictions
Cavity FC10-2 (see Line Bodies & Cavities section)
Cavity Tools Rougher: 02580274
Finisher: 02580247
Cartridge Weight 1.80 lbs (0.82 kg)
2 Cartridge Material Steel with hardened work surfaces.
Zinc plated exposed surfaces.
Buna N or Viton® o-rings.
Solid thermoplastic polyester back-up rings.
1
Seal Kits Buna-N FS102-N P/N: 03033872
Viton® FS102-V P/N: 03051757
Performance
bar psi
3000
200
2500
150
2000
Pressure
100 1500
1000
50
500
0 0 Ft-lbs
0 20 40 60 80 100 120
Nm
0 20 40 60 80 100 120 140 160
0.74
1.250 Thick 2 (18.8)
(32) 1.50
(38.1)
2.17
0.28 (55)
(7.1) 0.28
(7.1)
0.87
(22) 1.77
1
0.20
(5) (45)
2.17
(55)
0.83
(21)
1.34
(34)
2 X ø 0.26
(6.5)
2.91
(73.9)
Inside ø0.88
(ø22.2)
4.84
(122.9)
2.45
(62.2)
0.04
(1)
1.27
(32.1) 2
1.52
(38.6)
ø0.62
1
(ø15.7) 7/8-14 UNF-2A
ø1.06
(ø26.9) Standard Line Bodies*
Pressure
Code Part No Material Weight
Rating
Aluminum, 3500 psi 0.40 lb
FH102-AS8 03037778
anodized (245 bar) (0.18 kg)
Steel, 6000 psi 1.16 lb
FH102-SS8 03037612
zinc plated (420 bar) (0.53 kg)
All measurements in inches (mm).
*Subject to technical modifications *Please refer to Line Bodies & Cavities section for details
1.38
require protection from high voltage surges in some electrical
(35)
circuits containing highly inductive or capacitive components.
These include certain types of motors, solenoids, relays and
transformers.
• AC voltage transient surges over 600 volts may require a voltage
surge suppressor (MOV varistor) to be placed in parallel to the
coil, as shown on the surge suppressor circuit diagram below.
Suggested Varistor
Voltage Joule Rating
1.14
(29)
Part No.*
115 150LA10A 45
230 250LA40A 130
*Available from electronics supplier
1.14
AC Voltage Diode Bridge Rectification (29)
Circuit Diagram
EN 175301-803-A
Part Number: 00394287
All measurements in inches (mm).
Varistor
Coil
1.05 1.41
1.05 (26.6)
(26.6)
(35.7)
(ø36.3)
1.43
(ø36.3)
(ø36.3)
ø1.43
ø1.43
18 lead length
(457)
(40.3)
1.59
(33.7)
1.33
(40.3)
1.59
(40.3)
1.59
(19.1)
0.75
1.05
1.05 (26.6)
(26.6) 1.05 0.51
(26.6) (13)
(ø36.3)
ø1.43
(ø 36.3)
(ø36.3)
ø1.43
ø1.43
19
(482)
(40.3)
1.59
0.43
(11)
(40.3)
1.59
(40.3)
1.59
(19.1)
0.75
1.28
1.05 (32.6) 1.41
(26.6) (35.7)
(ø36.3)
ø1.43
(ø36.3)
(ø36.3)
ø1.43
ø1.43
18 lead length
(457)
(50.3)
(50.3)
1.98
1.98
(50.3)
1.98
(33.7)
1.33
(19.1)
0.75
1.28
1.05 1.05 0.51 (32.6)
(26.6) (26.6) (13)
(ø36.3)
ø1.43
(ø36.3)
ø1.43
(ø36.3)
ø1.43
19
(482)
(50.3)
1.98
(50.3)
1.98
0,43
(11)
(50.3)
1.98
(19.1)
0.75
1.60
(40.6)
250 VAC
INPUT VARISTOR
AC +
Voltage
1.26
(32)
OUTPUT
to Coil
M3x.5 -
0.217 GROUND
0.394
(10)
(5.5)
Part Number: 02600582
0.819
(20.8)
0.354
(9)
1.13
(28.6)
Type: EN 175301-803-B
Part Number: 02600570 - without diode bridge; use with DC Coils
Part Number: 02600582 - with diode bridge; use for applying
AC input to DC coils
All measurements in inches (mm).
1.33
ø0.51 (33.8)
(ø12.9)
ø1.13
(ø29)
0.945
(24)
ø1.13
(ø29)
ø.51
(ø12.9)
0.394
(10)
1.26
(32)
(27.7)
1.09
1.26
(32)
DL-32-1329
18
(457)
ø1.13
(ø29)
1.26
(32)
Dual Leads
All measurements in inches (mm).
Overview
Description
As important as the performance of the valve itself is the proper installation
of the cartridge into a correctly made manifold or body.
HYDAC’s full range of cartridge valves can be used in custom manifold
applications, or for in-line installation via our selection of cartridge line
bodies. These next few pages provide the detail required for designers,
machine shops or users to create successful HYDAC cartridge valve
installations. Whether using form tools to make a custom manifold, or
quickly plumbing a valve and line body assembly, the HYDAC cartridge
cavity system enables versatile and reliable valve applications. Performance
and dimensional information for a specific valve can be found on individual
cartridge data sheets.
Cavities
Cavity drawings are provided as a tool for HYDAC customers who desire
to produce their own custom manifolds. Manufacturing to the drawings
enclosed ensures correct cavity fit and proper cartridge function at
maximum performance limits.
Line Bodies
HYDAC line bodies provide a cost effective method for compact, easy
installation of any HYDAC cartridge. Using authentic HYDAC bodies - with
each cavity and port machined to our own exacting standards - ensures
safe, high-performance function of cartridge valves plumbed “in-line.”
Standard line bodies are available for each cavity size in both clear anodized
aluminum (3500 psi max. pressure) or clear zinc-plated steel
(6000 psi max. pressure) are offered with SAE O-ring boss ports. When
ordering alternate port configurations, please contact the factory.
Port 1
FC**-3 Cavity
B FH06-3 FH08-3 FH10-3 FH10-S3 FH12-3
A 1.0 (25.4) 1.13 (30)* 1.25 (32)* 1.25 (30) 2.0 (50)*
Port 3 B 1.0 (25.4) 1.25 (30) 1.16 (29.5) 1.25 (30) 2.0 (50)
C 2.0 (50.8) 2.5 (60)* 2.5 (60)* 2.50 (60) 4 (100)*
D 2.25 ( 57.2) 2.62 (66.5) 2.62 (66.5) 2.75 (69.9) 4.02 (102)
K
J E 3 E 1.75 (44.5) 2.12 (53.8) 2.12 (53.8) 2.25 (57.2) 3.39 (86)
D 2 F 0.25 ( 6.4) 0.18 (4.6) 0.197 (5) 0.25 (6.4) 0.197 (5)
H G 1.5 ( 38.1) 2 (50.8) 2 (50.8) 2.00 (50.8) 3.54 (90)
H 0.28 ( 7.1) 0.28 (7.1) 0.28 (7.1) 0.282 (7.16) 0.34 (8.6)
Port 2 1
J 0.95 ( 24.1) 1.17 (29.7) 1.38 (35) 1.248 (31.70) 2.14 (54.4)
F G
C K 0.55 ( 14.0) 0.60 (15.2) 0.72 (18.3) 0.582 (14.78) 1.17 (29.75)
A FH16-S3 FH16-3
A 2.00 (50.8) 2 (50)*
B 2.00 (50.8) 2.5 (50.8)
Port 1
C 3.50 (88.9) 4 (100)*
D 3.50 (88.9) 4.02 (102)
E 2.875 (73.03) 3.39 (86)
F 0.23 (5.8) 0.197 (5)
G 3.04 (77.22) 3.54 (90)
H 0.34 (8.6) 0.34 (8.6)
J 1.506 (38.25) 2.18 (55.4)
K 0.695 (17.65) 1.02 (25.9)
dimensions are in inches (mm)
Port 1
0.50 (0.020)
r .001 (0.025) A
ø12.75 (ø0.502)
0.025 (0.001) A .039 (1) ø0.502 (12.75)
12° r .001 (0.025) A
Ra1.6 12°
22.50 min (0.886 min)
63 (Ra1,6)
16.10 (0.634)
21.50 (0.846)
R0.4 max
(0.531)
13.50
0.634 (16.1)
DETAIL X 30° (R0.015 max) 0.438 X R .015 (0.38) MAX
0.846 (21.5)
(11.11) min 0.492 (12.50)
1.115 (28.32)
2 63 (Ra 1.6) 30°
1.181 (30)
Ra1.6
(ø0.197 max)
ø5.0 max
63 (Ra 1.6)
1
30° ø0.250 (6.35) max
ø11.51 Pilot Drill 63 (Ra 1.6)
Ra1.6
(.104 ±.007)
2.65 ±0.18
0.1 (0.004) A
h 0.004 (0.10) A
63
(Ra1.6
)
DETAIL X
(4 : 1) 0.104 ±.007 (2.65 ±0.18)
45°
)
08
-0 2
4 -0.
.0
45°
00 .1
0. R0
0.05 (0.002) A
1.01
Ra3.2
1.01
Ra1.6
0.1 (0.004) A A
Ra3.2
(0.591)
15.01
X
25.3 (0.997)
(0.719)
24 (0.945)
18.3
(0.45)
11.43
33.3 (1.311)
19.05 (0.75)
(0.578)
20.6 (0.812)
14.68
28.56 (1.125)
X
2 60˚ 2
60˚
(ø0.344)
(ø0.438)
Ra
ø11.13
Ra
ø8.74
max
max
3.2
3 .2
max 1 1
ø12.5
max
(ø0.492) ø15.49
(ø0.610)
DETAIL X
.6
.6
Ra1
DETAIL X
Ra1
ø20.6 +0.1
2.54 +0.38
(0.1 +0.015)
ø23.90 +0.1
2.54 +0.38
)
.2 7 )
-0 00 .2 7
.1 0. -0 00
R0 03 - 0 .1 - 0.
0 R 03
0.
45°
0
(R 0.
45°
(R
(0.04)
1.02
A
Ra1.6
(ø0.875 +0.002) Ra3.2
(0.811 min)
20.6 min
0.1 (0.004) A
(0.040)
Ra1.6
A
(0.750)
Ra3.2
19.05
X
(0.969)
24.61
35.5 (1.4)
Ra
X
(1.430 +0.016)
46.84 (1.844)
(1.006)
36.32 +0.4
3.2
25.55
60˚
(1.850 min)
60˚
(ø0.75)
ø19.05
47 min
max
2
2
Ra
(ø0.673)
ø17.1
max
3.2
1 max
ø20.5
max
(ø0.807) ø28.19
DETAIL X (ø1.110)
1
Ra1.6
Ra1.6
30˚ ±1˚
0.1 (0.004) A
(0.130 +0.012)
(ø1.150 +0.004)
(0.130 +0.015)
ø35.50 +0.1
Rmax0.4
3.30 +0.38
(ø1.398 +0.004)
(Rmax0.016)
R0.4 max
(R0.015 max)
(R
0. R0.
45
00 1-
.2 7)
°
3 0.2 -0 00
-0 .1 - 0.
.0 0
R 03
07
03046486
45°
) FORM TOOLS 0.
0
00555690 FORM TOOLS
MILLIMETER (INCH) Rougher: 02580668 (R
MILLIMETER (INCH) Rougher: 02580250
Technical modifications reserved Finisher: 02580667
Technical modifications reserved Finisher: 02582075
0.50 (0.020)
0.025 (.001) A
(0.04)
12°
1.01
0.1 (0.004) A A
Ra1.6
ø12.75 (ø0.502) Ra3.2
0.025 (0.001) A
11.43
(0.45)
.2
(0.578)
Ra1.6
19.05 (0.75)
14.68
3
X
Ra
26.9 (1.06)
60˚
33.3 (1.312)
(1.141)
13.50 (0.531)
16.10 (0.634)
28.98
41.28 (1.625)
R0.4 max 3
23.50 (0.925)
X 30°
32.51 min (1.280 min)
26.11 (1.028)
Ra
(R0.015 max)
60˚
3.2
31.50 (1.240)
(ø0.234)
ø5.94
max
3
Ra
2
1
30°
.6
(ø0.234)
Ra
ø5.94
max
1
.6
max
(ø0.197 Max)
2X ø5.0 Max
1 ø13.97
Ra1.6
Ra1.6
Ra1.6
ø11.20 - 11.24 (ø0.4410 - 0.4425)
0.025 (0.001) A
0.1 (0.004) A
Ra1.6
A 30˚ ±1˚
(0.104 ±0.007)
ø11.96 - 12.00
2.65 ±0.18
(0.1 +0.015)
ø20.6 +0.1
2.54 +0.38
Ra1.6
(ø0.4710 - 0.4725)
(ø0.811 +0.004)
0.1 (.004) A R0.4 max
(R0.015 max)
)
0.2 07
.1- 0.0
R0 3 -
45°
.00
8)
R0
0
.0
(
4 2
45°
00 0.
-0
0. -
DETAIL X
(R 0.1
R
A
Ra1.6
±1 °
Ra3.2 15°
16.50 (0.650)
1 (0.039)
(15.01)
14.27 (0.562)
Ra1.6
X
0.591
(17.78)
3.2
0.91 (23.1)
63
0.7
Ra
1.25 (31.75)
60˚ Ra1.6
1.56 (39.6)
(34.54)
63
1.36
3 X
1.875 (47.6)
0.05 (0.002) A
Ra
ø0.266
(ø6.75)
60˚
3.2
28 °
31.20 (1.228)
Ra1.6
30
max
63
°
3
38.30 (1.508)
48.00 (1.890)
47.60 (1.874)
49.5 (1.949) MIN
2
2
28 °
30
°
Ra1.6
ø0.266
(ø6.75)
63
max
max 1
ø0.610
(ø15.49) 1
Ra1.6
PILOT DRILL
0.002 (0.05) A ø 16.51 (0.650) MAX
ø0.625 +0.002
(ø15.88 +0.05)
Ra1.6
63
Ra1.6
17.525 (0.690)
ø
17.475 (0.688)
0.004 (0.1) A
0.025 (0.001) A A
30˚ ±1˚
Ra1.6
63
19.10 (0.752)
(ø23.90 +0.1) ø
19.05 (0.750)
R0.015 max
(R0.4 max) 45°
07
.0
2.92 (0.115)
2.54 (0.100)
- 0 0.2)
.0 8)
3
(0 .00
0 -
)
04
.0 .1
10 (0
R0 (R0
DETAIL X
45°
0. .20
SCALE 4 : 1
R 0
(0.04)
1.02
A
Ra1.6
(ø0.936 +0.002)
(0.874 min)
Ra3.2
22.2 min
0.1 (0.004) A
Ra1.6
(0.040)
A
(0.750)
19.05
X
25.4
Ra3.2
(1)
35.56 (1.4)
48.26 (1.900)
X
(1.433 +0.016)
64.26 (2.530)
(ø0.625)
Ra
60˚
(2.161)
(1.132)
ø15.88
28.75
36.4 +0.4
54.9
max
3
3.2
60˚
(2.425 +0.016)
75.39 (2.968)
(2.102)
61.6 +0.4
53.4
3
(2.874 min)
Ra
73 min
Ra
3.2
3.2
60˚
(ø0.528)
60˚
(ø0.625)
ø13.4
ø15.88
max
2
max
2
Ra
(ø0.528)
ø13.4
max
3.2
max 1 1
ø20.5 max
0.05 (0.002) A ø26.42
(ø0.807)
Ra1.6
(ø1.040)
Ra1.6
0.05 (0.002) A
ø22.225 +0.05
ø27 +0.05
(ø0.875 +0.002)
(ø1.063 +0.002)
Ra1.6
Ra1.6
0.1 (0.004) A
30˚ ±1˚ 0.1 (0.004) A
30˚ ±1˚
(0.130 +0.012)
ø29.2 +0.1
3.3 +0.3
(0.130 +0.015)
(ø1.398 +0.004)
3.3 +0.38
Rmax0.4
(Rmax0.016) R0.4 max
(R0.015 max)
(R R .2 7)
0. 0.1 - 0 .00
45
00 - .1 - 0
°
3 0. 0
R 03
-0 2 0
.0 0.
03046629 07 00561755 (R
) FORM TOOLS FORM TOOLS
45°
MILLIMETER (INCH) Rougher: 02582074 MILLIMETER (INCH) Rougher: 02580094
Technical modifications reserved Finisher: 02582075 Technical modifications reserved Finisher: 02580095
ø 49 (1.929)
ø 35.60 ±0.10 (1.402±0.004)
0.025 (0.001) A
17.50 (0.689)
± 1°
1 (0.039)
1-5/16"-12 UN-2B
15°
MIN
0.05 (0.002) A
Ra1.6
63
30°
28°
Ra1.6
X 63
0.05 (0.002) A
16.67 (0.656)
3
37.25 (1.467)
Ra1.6
56 ±0.40 (2.205±0.016)
63
44.75 (1.762)
19.70 (0.776)
ø 6.35 (0.250)
57.5 (2.264) MIN
30° 2 MAX
28°
Ra1.6
63
ø 15.88 (0.625)
MAX
25.475 (1.003)
ø
25.425 (1.001)
Ra1.6
0.025 (0.001) A
63
45
3.68 (0.145)
3.30 (0.130)
)
08
.0 4)
(0 .00 DETAIL X
2 0 ( 0
SCALE 3 : 1
0. .10
0
(1.01)
ø25.0 (ø0.984)
Ra1.6
0.04
ø15.70 ±0.05 (ø0.618 ±.002) 0.004 (0.1) A A
Ra3.2
9/16-18 UNF-2B
0.50 (0.020)
(11.43)
3.2
0.025 (0.001) A
0.75 (19.05)
0.45
0.563
(14.3)
12°
1.141 (28.98)
X
Ra
60˚
1.06 (26.9)
ø12.75 (ø0.502)
1.312 (33.3)
0.025 (0.001) A 4
1.7 (43.18)
1.65 (41.91)
Ra1.6
Ra
1.875 (47.6)
60˚
3.2
ø0.234
(ø5.94)
2.125 (53.98)
max
13.50 (0.531)
16.10 (0.634)
R 0.4 max
X (R0.015 max) 3
23.50 (0.925)
Ra
26.11 (1.028)
3.2
60˚
36.20 (1.425)
ø0.234
(ø5.94)
max
4
33.50 (1.319)
30°
43.0 min (1.693 min)
Ra1.6
2
42.01 (1.654)
30°
ø0.234
(ø5.94)
3
max
Ra1.6
1 max
30° 2
ø0.492
Ra1.6
(ø12.5)
Ra1.6
0.002 (0.05) A
ø0.500 +0.001
( Ø 0.197 max)
3XØ 5.0 max
(ø12.7 +0.03)
1 ø0.562 +0.002
ø9.53 Pilot Drill (ø14.27 +0.05)
Ra1.6
(ø0.375 Pilot Drill)
Ra1.6
Ra1.6
Ra1.6
(2.54 +0.38)
ø0.811 +0.004
0.1 +0.015
0.025 (0.001) A
(ø20.6 +0.1)
Ra1.6
A
R0.015 max
ø11.96 - 12.00 (ø0.4710 - 0.4425) (R0.4 max)
)
45°
08
- 0 .2
4 -0
07
.0
.0
00 1
- 0 .2)
0. R0.
DETAIL X
0 3 0
.0 .1-
R0 (R0
(R
45°
02581970 FORM TOOLS 00555693 FORM TOOLS
MILLIMETER (INCH) Rougher: 02582057 MILLIMETER (INCH) Rougher: 02580088
Technical modifications reserved Finisher: 02582058 Technical modifications reserved Finisher: 02580089
7/8-14 UNF-2B
22.2 min
0.05 (0.002) A
(0.04)
A
1
A
(1.433 +0.016)
Ra3.2
Ra
(1.132)
36.4 +0.4
28.75
60˚
3.2
X
(0.591)
(0.04)
(2.425 +0.016)
23.6 (0.930)
15.01
1.01
(0.719)
(2.102)
61.6 +0.4
18.3
53.4
Ra
4
34.54 (1.36)
(3.386 +0.016)
31.75 (1.25)
3.2
(3.063)
39.6 (1.560)
Ra
77.8
86 +0.4
(3.858 min)
60˚
48.26 (1.9)
3.2
4 60˚
98 min
(ø0.528)
50.8 (2)
55.4 (2.18)
ø13.4
max
63.5 (2.500)
3
Ra
(ø0.266)
3.2
ø6.75
Ra
60˚
max
3.2
60˚
3
(ø0.528)
ø13.4
max
Ra
2
(ø0.266)
3.2
60˚
ø6.75
max
(ø0.528)
2
ø13.4
max
(ø0.2.66)
ø6.75
max
1
max
max
ø15.49 1 ø20.5
(ø0.807)
Ra1.6 Ra1.6
(ø0.610)
Ra1.6
Ra1.6
ø23.90 +0.1
(0.130 +0.012)
(ø0.941 +0.004)
ø29.2 +0.1
R0.4 max
3.3 +0.3
(ø1.150 +0.004)
(R0.015 max)
Rmax0.4
(Rmax0.016)
.2 7)
-0 0
.1 0.0
R0 03-
0
0.
45°
(R
(R R0
45
0. .1
00 -
°
3- 0.
00555694 FORM TOOLS 03046634 0. 2
00 FORM TOOLS
MILLIMETER (INCH) Rougher: 02580248 MILLIMETER (INCH) 7)
Rougher: TBA
Technical modifications reserved Finisher: 02580249 Technical modifications reserved Finisher: TBA
(0.04)
1.02
ø44.45 (ø1.75)
1 5/16-12UN-2B 0.05 (0.002) A
0.1 (0.004) A ø28.6 +0.05 (ø1.126 +0.002)
A
Ra1.6
Ra3.2
(0.750)
19.05
25.4 (1)
X
35.56 (1.4)
48.26 (1.900)
54.9 (2.161)
64.26 (2.530)
(ø0.625)
60˚
ø15.88
4
max
76.2 (3)
92.08 (3.625)
81.75 (3.219)
Ra
104 (4.094)
3
.2
60˚ 3
(ø0.625)
ø15.88
max
Ra
3
.2
60˚ 2
max
ø15.88
Ra
3
.2
(ø0.625)
1 max
ø24.49
(ø0.964)
Ra1.6
ø25.43 +0.05
(ø1.001 +0.002)
0.05 (0.002) A
ø27 +0.05
(ø1.063 +0.002)
Ra1.6
0.1 (0.004) A
30˚ ±1˚
(0.130 +0.015)
3.3 +0.38
ø35.50 +0.1
(ø1.398 +0.004)
R0.4 max
(R0.015 max)
.2 7)
-0 0
.1 0.0
R0 03-
.0
R0
45°
5-way Cavities
Size M45: FCM45-5
ø59.69 Valve Area
(ø2.35 Valve Area)
ø50.292 (ø1.98)
0.025 (0.001) A
22.00 min (0.866 min)
ø47.400 ±0.100
(ø1.866 ±0.004) 0.127 (0.005) A
M45 x 2.0 - 6H
0.100 (0.004) A
A +0.051
ø40.00 -0.000
+0.002
15° (ø1.575 -0.000 )
0.050 (0.002) A
41.00 (1.614)
(1.22)
X
31.00
60.96 (2.40)
71.00 (2.795)
30° 5
90.93 (3.58)
Ra
R0.127 Max
143.08±0.40 (5.633±.016)
1.6
101.00 (3.976)
144.00 min (5.67 min)
(R0.005 Max)
120.90 (4.76)
Ra1.6
131.50 (5.177)
4
Ra
30°
1.6
Ra1.6
30°
3
Ra
1
.6
30°
Ra1.6 2
Ra
1.6
4X ø19.50 Max
(ø 0.767 Max)
ø33.00 Pilot Drill
1
(ø1.299 Pilot Drill)
1.00 (0.04)
+0.051
ø34 -0.000
Ra1.6
0.025 (0.001) A
3.30 (0.13)
+0.002
(ø1.339 -0.000 )
+0.051
ø36 -0.000
+0.002 0.025 (0.001) A
(ø1.417 -0.000 )
+0.051
ø38.00 -0.000
- 0 25
0.025 (0.001) A
10
+0.002
(ø1.496 -0.000 )
4 0.
.0
00 -
45°
0. .1
(R R0
DETAIL X
SCALE 3 : 1
45°
9/16-18 UNF-2B
R 0.004-0.008 r .001 (.025) A
(0.10 - 0.20)
ø0.502 (12.75)
r .001 (.025) A
Ra1.6
0.039 (1)
12°
63
(Ra1.6) 0.492 (12.50)
0.634 (16.10)
Scarf Cut Ring R 0.015 (0.38)
0.846 (21.50)
1.775 (45.09) min Ream Depth
0.986 (25.04)
63 max
Part No. 02600583
1.115 (28.32)
(Ra1.6)
(material PTFE) 2
°
30
1.805 (45.85)
63
(Ra1.6)
63 30° 1
(Ra1.6)
ø2.54 (0.10)
ø 0.377 (9.58) R(0.30)
ø0.250 (6.35)
0.012 ø0.406 (10.31)
0.376 (9.55) max
r .001 (.025) A ø0.453 (11.51)
max (2x)
63
25.40 (1.00) ø9.49 (Ra1.6) R 0.004 to 0.008
(0.10 to 0.20)
(ø0.374)
R0.30 MAX (0.012)
ø0.219 (5.56) max
ø0.340 (8.64) min MACHINE TOOLS:
Pilot Drill Flat Bottom ROUGHER: 02585083
FINISHER: 02585084
63
Ra1.6
(0.492)
25.04 (0.986)
12.49
28.32 (1.115)
(material PTFE)
61.71 (2.429)
4xø6.35 max
(ø0.250 max)
36.53 (1.438)
ø9.49
(ø0.374)
20.60 (0.811)
19.05 (0.750)
11.43 (0.450)
1.00 (0.039)
14.50 (0.571)
02610069
Note: Sealed models have a central O-ring. B Ra 1.6
63
0.1 (0.004) A
32.50 (1.280)
(2.441)
61.00 (2.402)
MIN REAM DEPTH
PTFE Ring Part No. 02600006
62.00
THOROUGHLY DEBURR
0.125”
(3.175) 0.1 (0.004) A
R 0.30 (0.012) MAX
Ra 1.6
63
ø 11.70 (0.461) MIN
PILOT DRILL FLAT BOTTOM
2.92 (0.115)
2.54 (0.100)
R 0.4 (0.016)
ø 0.50” 1.378” MAX
Ra1.6
63
(12.7) (35) 12.75 (0.502)
ø
12.70 (0.500)
R 0.20 A
0.1 (0.0
45° 0 (0 08)
.00
4)
DETAIL B MACHINE TOOLS:
ROUGHER: 02581744
FINISHER: 02581745
(0.571)
CAVITY FC08-SP PER
02610070 HYDAC DWG No. 02581743
EXCEPT REAM DEPTH AS SHOWN
With Viton Seals
14.50
®
02610071
With PTFE Ring (standard)
02610072
32.50 (1.280)
Note: Sealed models have a central O-ring.
REAM DEPTH
67 (2.638)
(3.350)
PTFE Ring Part No. 02600006 THOROUGHLY
SPOTFACE to SPOTFACE
68 (2.677)
99.60 (3.921)
DEBURR
85.10
ø 0.125”
(3.18)
ø 0.50” 2.02”
(12.7) (51.31)
12.75 (0.502)
ø
Sealed pistons should not be 12.70 (0.500)
ø18.30 (0.720)
24 (0.945)
25.3 (0.996)
15.01 (0.591)
0.50 (0.020)
With PTFE Ring (standard) 30° ±1°
02610075 Ra1.6
63
Note: Sealed models have a central O-ring. B 0.1 (0.004) A
60°
37.60 (1.480)
Ra1.6
63
0.18” Ra1.6
(4.57) R 0.4 (.016) MAX 63
ø 9.53 (0.375) MAX
R 0.20
0.1 (0.0
0 0.1 (0.004) A
(0.0 08)
04) ø 15 (0.591) MIN
PILOT DRILL FLAT BTM
ø 0.62” 1.55” A
15.93 (0.627)
(15.85) (39.27) ø
15.88 (0.625)
45°
(0.115)
(0.100)
DETAIL B
MACHINE TOOLS:
2.92
2.54
SCALE 2 : 1
ROUGHER: 02581762
FINISHER: 02581770
(0.720)
(1.480)
02610064 CAVITY FC10-SP PER
HYDAC DWG No. 02581775 A
EXCEPT REAM DEPTH AS SHOWN
With Viton® Seals
18.30
37.60
02610065
With PTFE Ring (standard)
02610066
Note: Sealed models have a central O-ring.
MAX (2X)
75.50 ±4.50 (2.972 ±0.177)
REAM DEPTH
(0.375)
(2.980)
113.30 ±0.20 (4.461 ±0.008)
95 (3.740)
SPOTFACE to SPOTFACE
THOROUGHLY
ø 9.53
75.70
ø 0.18”
(4.57)
ø 0.62” 2.27”
(15.85) (57.56)
MAX (2X)
ø 15.08 THRU
SPOTFACE = 0.5 (0.02) x
11.13
15.92 (0.627)
ø
15.88 (0.625)
0.30 (0.012) A
3 1 33 11 33 11 3 1 SYMBOLS
N = Buna-N
4-Way 3 1 3 1 3 1 V = Viton®
0 2 4
0 2 4 0 2 4
0 2 4
3 1
3 1 3 1
2-Way Cavity Part Number Model Code 3-Way Cavity Part Number Model Code
3 1 02610219 FP062-0-N 02610220 FP063-0-N
02610241 FP062-0-V 02610248 FP063-0-V
03012753 FP082-0-N 03012754 FP083-0-N
03012707 FP082-0-V 03012734 FP083-0-V
2 03014157 3 FP102-0-N 2 4 3 03022548 4FP083-2-N
30314161 FP102-0-V 03022549 FP083-2-V
03064028 FP122-0-N 03014158 FP103-0-N
1 2 3 2 3
03064017 FP122-0-V 1 03014173 FP103-0-V
03056431 FP162-0-N 3158484 FP103-2-N
03056432 FP162-0-V 2 02610315 2 FP103-2-V
1 1
03082862 FP123-0-N
03081863 FP123-0-V
1 1
02610316 FP123-2-N
02610317 FP123-2-V
03056433 FP163-0-N
03056434 FP163-0-V
02610318 FP163-2-N
02610319 FP163-2-V
Rougher
Finisher
Part No. Shank ø Shank ø
Cavity Part No.
High Speed inch inch
Carbide
Steel (HSS)
Connection Type: ________________________________ ______ (see valve data sheet for options)
TEMPERATURE: Oil Operating Temp. Range: __________________ Ambient Temp. Range: ________________
Valves
Model Code Qty. Position
______________________________ __________ _____________
______________________________ __________ _____________
______________________________ __________ _____________
______________________________ __________ _____________ #1 (top)
#5 (side)
______________________________ __________ _____________
______________________________ __________ _____________
______________________________ __________ _____________ #4 (back)
______________________________ __________ _____________
______________________________ __________ _____________
______________________________ __________ _____________ #3 (front)
______________________________ __________ _____________
Ports #2 (bottom)
Size / Type Qty. Labels Position #6 (side)
________________ ______ _____________ _______________
________________ ______ _____________ _______________
________________ ______ _____________ _______________
________________ ______ _____________ _______________
________________ ______ _____________ _______________
________________ ______ _____________ _______________
________________ ______ _____________ _______________
HYDRAULIC CIRCUIT
Canada www.HYDAC-NA.com
HYDAC CORPORATION HYDAC CORPORATION HYDAC CORPORATION
14 Federal Road Sales Office Sales Office
Welland, Ontario, Canada L3B 3P2 5160 75 Street NW Montreal, Québec, Canada J2M 1K9
+1.905.714.9322 Edmonton, Alberta, Canada T6E 6W2 +1.877.539.3388
+1.780.484.4228
Mexico www.HYDACmex.com
HYDAC INTERNATIONAL SA de CV
Calle Alfredo A Nobel No 35
Col Puente de Vigas
Tlalnepantla, Edo Mexico
CP 54090
Mexico
+011.52.55.4777.1262
© Copyright 2019 HYDAC TECHNOLOGY CORPORATION • Cartridge Valves Catalog PN#02087369 / 10.19 / CHD1110-1389