You are on page 1of 6

series

Extract
valves

www.koolair.com
GPD-AUTO 1

Extract valve GPD-AUTO

CONTENT
Description 2
Air-flow and acoustic characteristics 3
2 GPD-AUTO

Extract valves

Description
GPD-AUTO is a new generation of exhaust vents which provides
the perfect match between high technical performances and
aesthetic requirements. Innovative design with a reliable
mechanical operation, air flow and acoustic qualities are the
major advantages offered by this new vent.

The fixed flow model, is perfectly consistent and thereby provide


uniform architectural solutions to kitchen, bathroom and WC
ventilation problems.

Operation
The air flow control element is a rigid flap providing a
pre-determined extraction flow of between 50 and 150 Pascal.

Components
The GPD-AUTO is available with the following air flow
capacities : 15, 30, 45, 60, 75, 90 m³/h

1. Ø100 or Ø125 sleeve with rubber ring


2. Vent
3. Control module
4 Removable louver grill

Maintenance
The GPD-AUTO vent must be periodically cleaned in order to
retain its maximum performances:

• Remove the louver cover (4) and the control module (3) from
the vent casing (the vent can be dismantled if necesary).

• Clean using soapy water without dismantling any of the


regulation module.

• Refit the parts in the vent casing.


GPD-AUTO 3

Air flow characteristics

(Tests reports CETIAT n° 2714172 et 1114080).

reduced nominal flow


Airflow in m3/h

Airflow in m3/h

Difference of pressure in Pa Difference of pressure in Pa

* Curves from test report CETIAT

Noise characteristics
(Tests reports CETIAT n° 2714172 et 1114080).

Vents characterized by their standard noise attenuation qualities Dn,e,w (C) and their acoustic power level Lw (at a stable
extraction flow) measured in compliance with the specification NF EN 13141-2.

The sound pressure level due to the vents’ own noise is given by the formula:
Lp = Lw - 10 log (V/12,5) in dB(A) where V is the volume of the room in m³
Exemple: for a 40 m³ room, and Lw = 32 dB(A), Lp = 27 dB(A).

Noise attenuation Dn,e,w (C) is determined using the 125 Ø sleeve, the opening being fitted or no with a soundproofing
module MIA.

GPD-AUTO GPD-AUTO

certified values vents 45/105 and 45/120: sames values that vent 45/135
4 GPD-AUTO

THIS CATALOGUE IS COPYRIGHTED.


Partial or full reproduction of its content is strictly prohibited without express written authorisation from KOOLAIR, S.A.

CEN-GPD-AUTO-1216-00
KOOLAIR, S.A.
Calle Urano, 26
Poligono industrial nº 2 – La Fuensanta
28936 Móstoles - Madrid - (España)
Tel: +34 91 645 00 33
Fax: +34 91 645 69 62
e-mail: info@koolair.com

www.koolair.com

You might also like