Professional Documents
Culture Documents
Usage instructions
• To ensure correct and safe usage with a full understanding of this product's performance,
please be sure to read through this manual completely and store it in a safe location.
• Please be sure to keep this Instruction Manual with care in order that you can consult it
immediately when needed.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited
• The contents of this operation manual and the specifications of this product are subject to
change without notice
• With or without defect of the product and this Instruction Manual, our company don’t take
responsibility for any damage concerning the product. The above-mentioned damage
includes the followings but isn’t limited to that; damages caused by the specifications,
functions and malfunction of the product and the results produced by using it. And it doesn’t
matter whether direct or indirect damage.
Company names and product names are trademarks or registered trademarks of their respective holders.
Copyright©2020DGSHAPECorporation
https://www.dgshape.com/
Contents
Contents ............................................................................................................................................. 1
How to use Open Edge Adapter........................................................................................................ 2
The Overview of this Instruction Manual....................................................................... 2
Included items ........................................................................................................................... 2
Items to be prepared separately ........................................................................................ 2
Usage method ............................................................................................................................. 3
1
Open Edge Adapter usage instructions
Included items
Component Parts
Open-edge-adapter(1)
Adapter Cap Screws Adapter Base
※ 1: Work Size
Step Section: 98.5mm in diameter; 10mm in height
Body Section: 95mm in diameter; 60mm in maximum height
※ 2: Included items in DWX-52D
2
Open Edge Adapter usage instructions
A Use a torque screwdriver to loosen the adapter screws, turning them approximately 4 times. (4
locations)
Note
No need to remove the screws from Open Edge Adapter so as to improve work efficiency and
prevent the loss.
3
Open Edge Adapter usage instructions
1 Orient the adapter cap removed in step B as shown in the following figure.
4
Open Edge Adapter usage instructions
Caution
Please observe the followings in order to prevent damaging the Disc workpiece.
• When tightening the screws, please use the torque screwdriver included in the package of DWX-
52D.
• Please tighten the screws in diagonal order.
B After the initial operations are finished, open the front cover.
5
Open Edge Adapter usage instructions
C Insert the Adapter into the Cramp as shown in the following figure.
Fixing knob
Note
Please use the Spanner (for Cramp) included in the package of DWX-52D when being hard
to turn the knobs by hand.
6
Open Edge Adapter usage instructions
E Lightly tug on the adapter to check that it does not come loose.
7
FA02250 R1-20xxxx