Professional Documents
Culture Documents
OEM Industrial OEM Oilfield Municipalities NACE National Association of Corrosion Engineers
NAHAD National Association of Hose and
Accessories Distributors
OEM
NFPA National Fluid Power Association
OEM
2
Table of Contents Introduction
3
Why Midwest Hose?
4
Why Midwest Hose?
• All locations have a test bench capable of testing hydraulic Layflat Hose Program
and industrial assemblies.
Rotary Hose Program
• We already do, or can do upon request, these tests: Info, Fittings
Choke & Kill, BOP
- Rupture test - Hardness test (metals) Rotary
- Pull test - Radiography (x-ray) Hydraulic Hose Program
- Chemically compatibility test - Phased array test (ultrasound) Rubber
- Flow rate test - Durometer test (rubber) Thermoplastic
- Impulse test - All rotary hose assemblies Teflon
- Abrasion test Crimp Fittings
are proof tested per API
Crimp Machines
- Salt spray test requirements. All layflat hose
- Proof test/Design Test assemblies are also proof Industrial Hose Program
- Chemical composition test tested Suction & Discharge
Discharge Only
(metals)
Our mobile testing unit can recertify hoses on-site Fire Hose
Composite Hose
• Mobile Testing available – saves transportation costs. Ducting Hose
• Safety Assessments – we stress safety awareness and Metal Hose & Exp Joints
Brake, Automotive Hose
compliance with safety audits and frequent spot checks.
• The Quality Department strives to have the best assembly Ind Hose Connections,
Protection
procedures and tests these procedures on our in-house
life cycle test machine before implementing changes at all Hammer Unions
locations.
Flow Iron,
• Demo Days – come to our 425,000 square foot corporate Frac Tank Supplies
headquarters in Oklahoma City for a lunch and let us
showcase our products. This involves a tour of our facility and Industrial Hose Rupture Test Pipe Fittings, Flanges
typically a test of our products most relevant to you. Prod, Drill &
Well Serv Products
5
Layflat Hose Program
Why Midwest Hose? Layflat Hose vs. Aluminum Pipe Through-the-Weave vs. 3-Ply Layflat Hose
There are many layflat hoses on the market, and as one of the largest
Layflat Hose Program for Fracking Operators suppliers in North America, Midwest Hose offers through-the-weave
Use of flexible layflat hoses reduces transport,
urethane layflat hose, as we believe it represents the best value for
Rotary Hose Program deployment treatment and disposal costs. High
our customers. Compared with hoses made from a blend of nitrile
Info, Fittings flexiblilty and kink resistance allows natural ground
Choke & Kill, BOP rubber and PVC, urethane hose offers 5X the abrasion resistance, less
contours to be followed without putting stress on the
Rotary elongation, and far superior puncture resistance.
hose and eliminates expensive path-cutting work.
Hydraulic Hose Program Polyurethane (PU) hose, is manufactured a couple different ways:
Rubber Aluminum pipe has 176 connections per mile, versus
Thermoplastic “three-ply” and “through-the-weave.” 3-ply hose is relatively labor
only eight–660 foot connections of layflat hose. This
Teflon intensive, whereas a long tube of urethane is glued over a woven
yields reduced labor costs and equipment costs. And
Crimp Fittings polyester hose jacket. Then it is turned inside-out, and an outer PU
Crimp Machines lower pressure loss results in far more efficient pumping.
cover is glued to the other side of the jacket. The final step is to fill
Industrial Hose Program the hose with steam, which cures the glue and creates the adhesion
Layflat hose is the choice of fracking operators
Suction & Discharge between the various layers. It’s important to note that the outer layer
worldwide. It provides superior performance and
Discharge Only of urethane is pin-pricked with thousands of small holes to allow
Fire Hose reduces operation costs. Its coilable construction
gases to escape during the steam curing process.
Composite Hose improves handling, speeds deployment and reduces
Ducting Hose both transportation and storage costs.
Metal Hose & Exp Joints Through-the-weave layflat hose also begins with a woven polyester
Brake, Automotive Hose hose jacket. At the end of a plastics extruder is specialized tooling,
Ind Hose Connections, One-Stop Shop through which the jacket is penetrated and coated with hot, molten
Protection Midwest Hose is a trusted name in water transfer thermoplastic polyurethane (TPU). The urethane, in liquid form at
products with hundreds of miles of layflat hose in such a high temperature, is literally forced through all the gaps in the
Hammer Unions service. weave of the hose jacket. The hose exits the die and begins to cool
immediately. Urethane completely encapsulates the woven jacket,
Flow Iron,
Frac Tank Supplies We are your one-stop shop for your water transfer and provides a watertight hose wall as well as incredibly tough
needs. We produce our own layflat fittings, reels, and protection for the hose jacket. The hose jacket, in turn, provides all
Pipe Fittings, Flanges deployment system and have the largest hose inventory the pressure capability for the hose, as well as limiting elongation
in North America. We’re a great partner- we provide and expansion. Once the hose is cooled it is fully formed, then coiled
Prod, Drill &
the same excellent customer service and availability on a reel and ready to be tested. This through-the-weave method is a
Well Serv Products
perfected in providing our other hose lines. more difficult manufacturing process than 3-ply, but well worth the
Hyd ACMPV, Filter Carts extra difficulty as it results in a much stronger final product.
Belts, Sheaves, Bushings Why We Test For a brief time, Midwest Hose sold 3-ply layflat and we are quite
We proof test all layflat assemblies ourselves because familiar with its advantages and disadvantages. We’ve chosen to
Valves we are dedicated to providing a safe, reliable, and supply our customers a through-the-weave layflat product, as we
Instrumentation cost effective product. We take a great deal of pride in believe modern through-the-weave construction represents the best
promising that only the highest of quality product leaves design in today’s large diameter layflat hose. 3-ply hose technology is
Gauges through our doors. adapted from the fire hose industry, a manufacturing technolgy that
Quick Couplings has been around for at least 140 years. Much like cars have replaced
Fitting Inventory the horse and buggy in moving people around these days, modern
Steel Adapters We stock a wide variety of hose fittings to fit our through-the-weave hoses, specifically ones made from thermoplastic
customers’ needs. Midwest Hose & Specialty is proud to urethane, are the best way to move large amounts of water.
Brass Fittings
manufacture both grooved and Storz fitting assemblies,
right here in the U.S.A. Midwest Hose & Specialty’s layflat hose uses no glues or adhesives,
which prematurely fail when exposed to moisture, heat, UV exposure,
repeated flexing, or dry out naturally over longer periods of time.
Purchasing Options Our layflat hose is free of pinholes and the cover will not delaminate.
Purchase out right or Lease-Purchase contracts available. Rather than sit on top of the woven polyester, our TPU is an integral
part of the hose, working in concert with the hose jacket. Our hose
will not “snake” along the ground due to excessive elongation.
Midwest Hose & Specialty supplies a tough, durable hose that is guaranteed for 5 years. We also offer a
deployment system and several types of fittings made in the U.S.A. Along with a huge inventory and
unbeatable service, our goal is to deliver the best overall hose value in the market.
Mud Frack
Pit Pond
IMR Program
Layflat Hose Layflat Layflat Layflat Inspection, Layflat Helpful
Hydrofracking Diagram Purchasing Example Handling & Service Maintenance, and RGA Procedure Layflat
Questionnaire Quotation Instructions Recertification and Warranty Calculations
6
Layflat Hose Program
Deployment System
Video
7
Layflat Hose Program
TRACKING
8
Layflat Hose Program
Flow Iron,
Resistance All assemblies are proof tested at working Frac Tank Supplies
Abrasion 25mm3 on DIN 53516/ISO4649 testing, up to 5 times pressure in the USA. We take a great deal
more resistant and 50% more puncture resistant than Nitrile/PVC Pipe Fittings, Flanges
of pride in promising that only the highest
Cold Remains flexible in as low as -40° F conditions quality product leaves through our doors. Prod, Drill &
Ozone No cracking in lining or cover when tested to ASTM D518 Well Serv Products
Procedure B (100 pphm/118°F/70 hours)
Chemical Resistant to most chemicals and petroleum products Hyd ACMPV, Filter Carts
Custom hose color and branding available on big volume orders Belts, Sheaves, Bushings
Valves
9
Rotary Hose Program
Instrumentation
Gauges
Pull Tests MWH
300,000
0
*Test stopped at 269,000 in fear 3.5D 4E
of breaking equipment. Hose Grade & Size
Rupture Tests (inches)
Our API 7K Rotary Hose rupture tests exceed standards as shown below.
30,000
25,000
20,000
Midwest Hose
PSI
15,000
API
Requirement
10,000
5,000
0
2D 2.5D 3D 3.5D 4D 3E 3.5E 4E 2MUD 3MUD 3.5MUD 4MUD
Hose Grade & Size
10
Rotary Hose Program
Flow Iron,
Integral Design Fittings Patent Pending Built-In vs Swaged Fittings Frac Tank Supplies
Our integral design allows us to have the shortest lead times in the Built-In Fittings are held in place by the hose’s Pipe Fittings, Flanges
industry and eliminates a leak point and pipe dope. wire reinforcement. Swaged Fittings are swaged
onto the hose by a 300 ton press. Both fitting Prod, Drill &
styles handle pressures and flow rates well but Well Serv Products
the Swaged Fittings outperform Built-In Fittings
Hyd ACMPV, Filter Carts
on pull tests. Midwest Hose was the first company
in the USA to do Swaged Fittings on rotary hose. Belts, Sheaves, Bushings
Valves
Neoprene Cover Impregnated with PVC Nitrile Tube designed to handle diesel,
Any End Connection ethanol, gasoline, oil, oil based mud,
Integral One Piece or Buttweld PVC improves ozone and ageing resistance and oil emulsions.
API Threads Fig 602 Fig 1002 Fig 1003 Fig 1502
No weld
necessary
Fig 2202 XXH 3K Flange XXH 5K Flange XXH 10K Flange Grayloc Unibolt
11
Rotary Hose Program
Hinged
H inged Safety Ring Joint Gaskets Safety Clamp
Clamp & Chain Spiral Wrap Lifting Collar Type BX Sticker
12
BOP Hose
Blowout Preventer Hose is ideally suited for any high pressure hydraulic applications where there is a need for hoses to be
Why Midwest Hose?
Fire Rated and capable of working in extreme heat in the event of an emergency.
Applications Layflat Hose Program
Blowout Preventer - between well control equipment and Industrial - steel mills, foundries, forging shops, and other Rotary Hose Program
control system volatile environments Info, Fittings
Offshore - Blowout Preventer Valves Refineries - Critical plant control systems Choke & Kill, BOP
Hydraulic Systems - with petroleum or water/glycol based fluids Mining - Fiery mines and areas with low flash point ignition risk Rotary
and for fuel and lubricating oils Marine - Tanker pump rooms and ring main systems
Hydraulic Hose Program
Rubber
Thermoplastic
Teflon
Crimp Fittings
SPEC SHEET ORDER Crimp Machines
BOP Armor better against abrasion
Industrial Hose Program
Tube Synthetic rubber Cover Stainless steel armor, .08” armor wall, protects against impacts, wear, handling, etc. Suction & Discharge
BOP Armor Reinforcement High tensile steel wire spiral layers Discharge Only
API 16D
Fire Protection 1500° F rated thermal blanket, non-flammable, non-conductive Fire Hose
Composite Hose
Ducting Hose
Metal Hose & Exp Joints
Brake, Automotive Hose
MWHFIREWALL5000-16 1” BLOW OUT PREVENTER CONTROL HOSE WP 350 BAR 5000 PSI
Ind Hose Connections,
Protection
SPEC SHEET ORDER
BOP Red more flexible, lighter weight
Hammer Unions
BOP Red Tube Synthetic rubber Cover Fire resistant synthetic rubber impregnated with fiberglass
API 16D Reinforcement High tensile steel wire spiral layers Flow Iron,
Frac Tank Supplies
VEP (API 16D) Nylon Hose Wing 5000 (API 16D) Fig 1502
Quick Couplings Halter API Crimp Fitting BOP QCs Integral Hose End
13
Rotary Hose Program
Instrumentation r r
Gauges
Grade E ID OD Max WP Test Pressure
Bend Radius Bend Radius
at WP in Storage Weight
W
14
Rotary Hose Program
Instrumentation
3000 PSI W.P. SLIM HOLE ROTARY HOSE -20° to 180° F WARNING! DO N
MIDWEST HOSE SHR-64-3K 4” ID 6000 PSI T.P. 0
0000
00 00
0 00/00
00 0 -29°
0//00 to 82° C INSPECT HOSE FO
Gauges
SPEC SHEET ORDER Quick Couplings
Tube Nitrile Reinforcement high tensile wires
Cover Neoprene impregnated with PVC Steel Adapters
r r
Brass Fittings
Slim Hole ID OD Max WP Min BP
Bend Radius Bend Radius
at WP in Storage Weight
W
15
Hydraulic Hose Program
85,000 impulse
Why Midwest Hose? y
cycles dailyy
3Q2014 LOT 65604
Layflat Hose Program Inkjet Printed
3Q2014 LOT 65604
16
Hydraulic Hose Program
Abrasion Resistance Exceeds ISO Standard Ozone Resistance Exceeds DIN EN Standard
Less Abrasion Compared to ISO 6945 Abrasion caused by hoses More Ozone Resistance Compared to Rubber hoses are naturally Why Midwest Hose?
rubbing against each other DIN EN 27326 susceptible to cracking caused by
or surrounding surfaces is a exposure to ozone. When hoses Layflat Hose Program
0.50 400
0.50 common type of hose damage 500 are tested in accordance with DIN
warranting replacement. The EN 27326, they must undergo a Rotary Hose Program
Info, Fittings
ISO 6945 test standard tests demanding combination of high
Abrasion (grams of cover material lost)
Steel Adapters
Bend Radius (Inches)
Hose -03 -04 -05 -06 -08 -10 -12 -16 -20 -24 -32 -40 Brass Fittings
1SN 3.9 5.1 7.1 7.9 9.4 11.8 16.5 19.7 24.8
R17 2.0 2.6 3.5 3.9 4.7 5.9
R16 2.0 2.6 3.5 3.9 4.7 5.9 8.3
ALL 2SN 3.9 5.1 7.1 7.9 9.4 11.8 16.5 19.7 24.8
R12 7.0 9.5 12.0 16.5 20.0 25.0
4SH 11.0 13.4 18.1 22.0 27.6
R13 19.7 24.8
R15 16.5 19.7 23.5
JACK 3.9 5.1
R5 R5AT 3.0 3.3 3.9 4.5 5.5 6.5 7.3 9.1 10.4 13.2 24.0
HO 5.1 19.7
PW 3.9
R4 2.25 3.00 3.75 4.50 6.00
JackTH
SWR2500 5 6
CNG5000
R7C/R7NC
R14 2.0 2.0 3.0 4.0 5.2 7.7 9.0 16.0
R14SC 3.0 3.5 4.0 4.5 4.5 5.5
R14PC 1.2 1.6 2.0 2.3 2.8 3.2
17
Hydraulic Hose Program
COMPATIBLE FLUID Mineral Oil
Why Midwest Hose? SAE/DIN Rubber Hydraulic Hose Hoses pigged and/or tested upon request.
Layflat Hose Program Safety factor on all hydraulic hose is 4 to 1.
Rotary Hose Program
Info, Fittings
Choke & Kill, BOP
Rotary
Hyd ACMPV, Filter Carts MWHR17-16 1” SAE 100R17 3045 PSI W.P. FLAME RESISTANT USMSHA
-40° F to 212° F
18
Hydraulic Hose Program
MWH2SN-16 1” 2SN DIN EN 853 SAE 100R2AT 2400 PSI W.P. FLAME RESISTANT USMSHA Why Midwest Hose?
Tube Synthetic Rubber Cover Synthetic Rubber SPEC SHEET ORDER Hydraulic Hose Program
Reinforcement Two high tensile steel wire braids Rubber
Thermoplastic
r Teflon
MWH2SN ID OD Max WP Min BP
Bend
W
MWHR16-16 1” SAE 100R16 2000 PSI W.P. FLAME RESISTANT USMSHA Hyd ACMPV, Filter Carts
-40° F to 212° F
19
Hydraulic Hose Program
Why Midwest Hose? MWHR12-16 1” SAE 100R12 4000 PSI W.P. FLAME RESISTANT USMSHA
MWHXF5K 1
Steel Adapters
MWHXF6K 1
Brass Fittings
4000/5000/6000
Series Spiral Hoses
1/2 Bend Radius
1 million cycles
20
Hydraulic Hose Program
2” is not specified by SAE 100R15 but tested to the same standards as other sizes.
-40° F to 250° F Gauges
Quick Couplings
MWHJH-06 3/8” IJ-100 JACK HOSE 10000 PSI W.P. FLAME RESISTANT USMSHA
Steel Adapters
SPEC SHEET ORDER
Brass Fittings
Tube Synthetic Rubber Cover Synthetic Rubber
Reinforcement Two high tensile steel wire braids
r
W
Jack Hose ID OD Max WP Min BP
Bend
Radius Weight Fitting Normal Reel
inch Tolerance (in.) Tolerance (in.) psi psi inch lbs./ft. Series Quantity
MWHJH-04 1/4 0.26 +/- .016 0.594 +/- .024 3.9 0.25 500
Approvals 10,000 20,000 2WB
MWHJH-06 3/8 0.382 +/- .016 0.750 +/- .026 5.1 0.36 400
MSHA accepted
IJ100 Material Handling Institute TEST DOCUMENTATION
Maximum Abrasion Resistance (ISO 6945): 0.2 grams
-40° F to 212° F
21
Hydraulic Hose Program
Why Midwest Hose? MWH2SNAT-16 1” 2SN DIN EN 853 SAE 100R2AT 2400 PSI W.P. FLAME RESISTANT USMSHA
-40° F to 275° F
-65° F to 300° F
22
Hydraulic Hose Program
MWHHO-24 1.5” HOT OILER 2250 PSI W.P. FLAME RESISTANT USMSHA Why Midwest Hose?
inch Tolerance Tolerance psi psi inch lbs./ft. Series Length Hydraulic Hose Program
Approvals MWHHO-24 1-1/2 1.516 +/- .031 2.142 +/- .059 2,250 6,900 19.7 1.59 4WB 150 Rubber
MSHA cover Maximum Abrasion Resistance (ISO 6945): 0.2 grams Thermoplastic
TEST DOCUMENTATION
Teflon
-40° F to 275° F Crimp Fittings
300° F intermittent Crimp Machines
MWHPWBK 06 3/8” 3000 PSI W.P. FLAME RESISTANT USMSHA Ind Hose Connections,
Protection
Tube Synthetic Rubber Cover Synthetic Rubber SPEC SHEET ORDER Hammer Unions
Reinforcement One high tensile steel wire braid
Flow Iron,
Pressure r W
Frac Tank Supplies
Instrumentation
Gauges
300 PSI W.P. FLAME RESISTANT
MWHR4-12 3/4” ID -40° to 212° F -40° to 100° C SAE 100R4
Quick Couplings
SPEC SHEET ORDER Steel Adapters
Tube Nitrile (NBR) Cover Neoprene (CR)
Reinforcement Multiple textile piles, dual helix wire for suction
Brass Fittings
r
W
100R4 OD Max WP
Bend
Suction Radius Weight Fitting Normal Roll
inch Tolerance (in.) psi in./HG inch lbs./ft. Series Length
MWHR4-12 3/4 1.14 300 2.25 0.41
Approvals
MWHR4-16 1 1.38 250 3.00 0.50
SAE 100R4
MWHR4-20 1-1/4 1.65 200 25 3.75 0.61 100
MWHR4-24 1-1/2 1.89 150 4.50 0.69
MWHR4-32 2 2.40 100 6.00 0.89
TEST DOCUMENTATION
-40° F to 180° F
23
Hydraulic Hose Program
6 Reasons to Use Thermoplastic Hose
Why Midwest Hose? • High chemical resistance to almost all chemicals, solvents, and cleaning fluids
• Up to 50% weight reduction to comparable rubber hoses
Layflat Hose Program • Excellent resistance against ozone, UV light, and aging
• Excellent resistance to hydrolysis and micro organisms
Rotary Hose Program • Higher abrasion resistance
Info, Fittings • Lower flow resistance and
Choke & Kill, BOP lower volumetric expansion
Rotary
Hydraulic Hose Program MWHJACKTH-06 3/8” IJ-100 10000 PSI W.P. JACK HOSE
Rubber
Thermoplastic SPEC SHEET ORDER
Teflon
Crimp Fittings Tube Thermoplastic Cover Polyurethane
Reinforcement One aramid fiber braid, one steel wire braid
Crimp Machines
Flow Iron,
SPEC SHEET ORDER
Frac Tank Supplies
Tube Thermoplastic Cover Polyurethane
Pipe Fittings, Flanges Reinforcement 1 or 2 synthetic fiber braids
Fitting
Hyd ACMPV, Filter Carts inch inch psi psi inch lbs./ft. Series
Used with sewer cleaning equipment in high humidity MWHSEWER2500-12 3/4 1.15 2,500 6,250 5 .28
Belts, Sheaves, Bushings 2WC
environments. MWHSEWER2500-16 1 1.45 2,500 6,250 6 .40
Valves TEST DOCUMENTATION
-40° F to 160° F
Instrumentation
10K
Quick Couplings Steel Adapters Teflon Tape Filter Cart Hydraulic Oil
24
Hydraulic Hose Program
Twin Line Available From ¼” to ½” MWHR7-08 1/2” SAE 100R7 2000 PSI W.P. Why Midwest Hose?
conductive SPEC SHEET ORDER Layflat Hose Program
Hammer Unions
MWHMB-032 5/32” 9100 PSI W.P. Flow Iron,
SPECSHEET
SPEC SHEET ORDER
ORDER Frac Tank Supplies
Tube Thermoplastic Cover Polyurethane
Reinforcement one aramid fiber braid Pipe Fittings, Flanges
inch inch psi psi inch lbs./ft. Series Hyd ACMPV, Filter Carts
MWHMB-012 5/64 0.197 0.8 .081
Replaces steel tubing in instrumentation, diagnostic, MWHMB-02 1/8 0.236 9,100 27,300 1.2 .148 MB Belts, Sheaves, Bushings
hydraulic workholding and testing applications.
MWHMB-032 5/32 0.315 1.6 .195
Valves
-40° F to 212° F hydraulic service TEST DOCUMENTATION
Instrumentation
-40° F to 160° F air/water service
Gauges
Quick Couplings
Brass Fittings
SPEC SHEET ORDER
Tube Nylon Cover Nylon
Reinforcement 316 Stainless steel interlocking carcass, minimum 5,000 psi differential pressure
r
W
Bend
Noncollapsible Hose ID OD Max WP Min BP Radius Weight Fitting Normal Roll
inch inch psi psi inch lbs./ft. Series Length
NCR5K-08 1/2 1.085 18 43.2
Approvals
Continuous
NCR7.5K-12 3/4 1.455 5,000 20,000 18 72.2 NCL
API 17E lengths over
NCR5K-16 1 1.740 20 112.0
GP 65-06-03 10,000 feet
GP 65-05-06 NCR7.5K-08 1/2 1.185 7,500 30,000 18 50.1
TEST DOCUMENTATION
Capable of working in 10,000 feet of water.
25
PTFE Hose
5 Reasons to Use Teflon Hose
Why Midwest Hose? • High chemical compatibility to almost all chemicals, excellent resistance
• Light weight, excellent flexibility and small bend radius
-65° F to 450° F all teflon hoses
Layflat Hose Program • Small inner friction loss and water absorption
• Higher temperature resistance
Rotary Hose Program • Deliverable with polyurethane abrasion protectant coat
Info, Fittings
Choke & Kill, BOP
Rotary Tube Teflon/PTFE, smooth bore SPEC SHEET ORDER
Cover Stainless steel braid
Hydraulic Hose Program
Rubber r
W
Thermoplastic
Teflon
MWHR14 Braid ID Braid OD Max WP Min BP
Bend
Radius Weight Fitting
Crimp Fittings inch Tolerance (in.) Tolerance (in.) psi psi inch lbs./100ft. Series
Crimp Machines MWHR14-03 3/16 0.187” +/- .01” 0.31” +/- .016” 3,000 12,000 2.0 6.7
MWHR14-04 1/4 0.250” +/- .014” 0.360” +/- .02” 3,000 12,000 2.0 7.4
Industrial Hose Program MWHR14-05 5/16 0.312” +/- .016” 0.42” +/- .02” 3,000 12,000 3.0 10.7
Suction & Discharge MWHR14-06 3/8 0.375” +/- .018” 0.500” +/- .024” 2,500 10,000 4.0 13.4 R7C
Discharge Only MWHR14-08 1/2 0.500” +/- .02” 0.640” +/- .028” 2,000 8,000 5.2 16.1
Fire Hose
MWHR14-12 3/4 0.750” +/- .024” 0.890” +/- .03” 1,200 4,800 7.7 24.8
Composite Hose
MWHR14-16 1 1.00” +/- .031” 1.13” +/- .047” 1,000 4,000 9.0 29.6
Ducting Hose
Metal Hose & Exp Joints TEST DOCUMENTATION
Brake, Automotive Hose
Gauges
Steel Adapters
Tube Teflon/PTFE parallel convoluted SPEC SHEET ORDER
Cover Stainless steel braid
Brass Fittings
r
W
MWHR14PC Braid ID Braid OD Max WP Min BP
Bend
Radius Weight Fitting
inch Tolerance (in.) Tolerance (in.) psi psi inch lbs./ft. Series
MWHR14PC-04 1/4 0.27” +/- .024” 0.45” +/- .024” 1,300 5,220 1.2 10.1
MWHR14PC-05 5/16 0.3” +/- .024” 0.49” +/- .024” 1,000 4,060 1.6 10.1
MWHR14PC-06 3/8 0.38” +/- .024” 0.59” +/- .024” 940 3,750 2.0 13.4
MWHR14PC-08 1/2 0.49” +/- .031” 0.71” +/- .031” 870 3,450 2.3 17.5 PCC
MWHR14PC-12 3/4 0.78” +/- .031” 1.06” +/- .031” 650 2,600 2.8 26.9
MWHR14PC-16 1 1.1” +/- .031” 1.37” +/- .031” 435 1,880 3.2 37
TEST DOCUMENTATION
26
OEM Shop
Valves
3. Build the kit. Assemble it, pig it, plug it, tag it.
There is a labor charge per kit.
6. Inspector double checks every order before it leaves. MWH Tracking System
27
Crimp Fittings
Quick Couplings
37° JIC
Steel Adapters
92
Brass Fittings
Thread ID and
All crimp fittings Shadow Chart App
are trivalent zinc or How to Identify
Crimp Specs plated. Salt spray testing Thread ID Fluid Ports Recommended
Utility available upon request. Poster Request and Connectors Torque Values
Stainless Steel
Crimp Fittings
available upon MJ FJX FJX30 FJX45 FJX90S FJX90M
Male JIC Female JIC Female JIC Swivel 30° Female JIC Swivel 45° Female JIC Swivel 90° Female JIC Swivel 90°
request. Most Short Neck Medium Neck
commonly in 2W 4W 6W R5 R7 2W 4W 6W R5 R7 2W 2W 4W 6W R5 R7 2W 4W 6W R5 R7 2W 4W 6W R5 R7
Allow for easier installation
stock are 2WB NPT Pipe
of hammer unions
FJX and MP
crimp fittings.
FJX90L MP MPX MPX90 MPAPI
Female JIC Swivel 90° Male Pipe Male Pipe Swivel Male Pipe Swivel 90° Male Pipe API Threads
Long Neck
2W 4W R5 R7 2W 4W R5 R7 2W 4W R7 2W 4W 6W
28
Crimp Fittings
Valves
FL FL22 FL30 FL45 FL60
Code 61 Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Instrumentation
O-Ring Flange Flange 22° Flange 30° Flange 45° Flange 60°
2W 4W 6W 4W 4W 2W 4W 6W 4W Gauges
Quick Couplings
Steel Adapters
Brass Fittings
FL67 FL90 FL90L FL100 FL110 FL135
Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring
Flange 67° Flange 90° Flange 90° Long Flange 100° Flange 110° Flange 135°
4W 2W 4W 6W 4W 4W 4W 4W
29
Crimp Fittings, Crimp Machines
Valves
30° Flare Female Compressor Discharge
FG NASP (P.T.T. Thread for (PTFE Hose) Flange 1502F 1502M
Instrumentation Female Grease North American Diesel) Swivel Integral 1502 Integral 1502
Thread Standard Pipe “Threaded” “Wing”
Gauges 2W 2W R5 R7 R5 R7 4W 6W 4W 6W
Machines
D160 D165
Crimps up to 1” 2SN, portable crimper, Crimps up to 1.25” 2SN, Or 1.25” 4SH/R12
uses same dies as D165 Compact design and reliable
340 tons 5HP 265 tons 7.5 HP Saves crimp 400 tons 7.5 HP Saves crimp
230v 3 Phase 230v 3 Phase diameters 460v 3 Phase diameters
Weighs 579 lbs Weighs 579 lbs on internal Weighs 6185 lbs on internal
computer computer
230v 1 Phase 230v 1 Phase
alternative alternative
30
Crimp Machine Installation Program
Crimp Machine Installation Program Saves crimp diameters on
internal computer Why Midwest Hose?
Mechanic shops and Custom Fabrication
shops like to install a crimp machine and Layflat Hose Program
stock hose and fittings to decrease downtime Rotary Hose Program
and increase profitability. No need to send Info, Fittings
a driver to pick up a hose when you can Choke & Kill, BOP
Rotary
custom build hoses in your shop. This solution Crimper Parts Layout Act Control Panel Cabinets and Bins
Standard saw cuts up to Hydraulic Hose Program
provides more flexibility than stocking 2
2” braided hydr
y aulic hose
hydraulic
Check every crimp
Rubber
premade hoses. Thermoplastic
Teflon
Steps Crimp Fittings
1) Establish hoses and fittings needed
Crimp Machines
• Smaller hoses are easier, cheaper
Industrial Hose Program
• Bigger hoses are more complicated, more Suction & Discharge
Reel
Ree
el Racks Saws Electronic Calipers
liability so it’s easier to let us build these Discharge Only
Reduces contamination Same as CC60
• How many hoses do you expect to build? significantly
Fire Hose
Composite Hose
Need a reel or 100 feet? Ducting Hose
• Straights, 45s, 90s for fittings? Metal Hose & Exp Joints
• Look at order history Brake, Automotive Hose
• Make list of items and bring labels to you Ind Hose Connections,
2) Select Crimp Machine Protection
3) Purchase Saw? Ultra Clean System D160/D165 Dies CC200 Dies
Hammer Unions
Same as CC200 Grease crimper
• Best to use a saw with a metal blade for a Calibrate micrometer
cleaner cut Calibrate calipers Flow Iron,
Frac Tank Supplies
4) Purchase or consign hose rack, cabinet
5) Setup Process Pipe Fittings, Flanges
• Install and calibrate crimper
Prod, Drill &
• Set up inventory Reminders Program
Well Serv Products
Info Logged Into Database
• Train and certify appropriate staff CC60 Dies CC1000 Dies From App (Spring 2015)
• Inventory can be managed by Midwest If hose does not meet Hyd ACMPV, Filter Carts
crimp specs, recalibrate
Hose (VMI Program) Belts, Sheaves, Bushings
Steps
1) Which items you’ll stock?
• Consider order history and expectations
2) Set up min/max. Put min/max on label?
3) Where to put the items?
4) Purchase bins if needed
5) Bring labels to you and setup all bins
6) An MWH employee will stop by and go through
your inventory to see what you need. MWH
personnel are used to the parts and can help keep
things organized. Both salespeople and delivery
drivers are accustomed to doing this service
31
Industrial Hose
er
er
Mat
Mat
Hydraulic Hose Program
Rubber
Thermoplastic
! CUSTOM LAYLINE HERE
Teflon MWHDRYMAT150-64
32
Industrial Hose
Page Oil and Gasoline O&G Page Water W
Why Midwest Hose?
59 Air Brake Tubing 52 Polyethylene Tubing FDA Layflat Hose Program
59 Steel Brake Line Tubing Assemblies 52 PVC Tubing FDA
59 Steel Brake Line Tubing Coils 51 PVC Braided FDA (Polybraid) Rotary Hose Program
46 Push-On 300 PSI Info, Fittings
50 Layflat Discharge
Choke & Kill, BOP
46 Liquid Propane Gas 300 PSI 48 PVC Air 300 PSI Rotary
47 Farm Tank Fuel 50 PSI 49 Multipurpose Air (Red Rubber)
34 Tank Truck 150 PSI 49 Contractors Water Assemblies Hydraulic Hose Program
Rubber
34 Tank Truck Corrugated 150 PSI 59 Rubber Heater Hose Thermoplastic
36 Tank Truck Ribbed 150 PSI 47 Farm Tank Fuel 50 PSI Teflon
37 Short Frac Tank Assemblies 46 Push-On 300 PSI Crimp Fittings
40 Petroleum Lightweight Gas Drop Crimp Machines
50 PVC Spray
36 Tank Truck Corrugated Low Temp 150 PSI 53 Single/Double Jacket Mill Hose Industrial Hose Program
35 Tank Truck 300 PSI Suction & Discharge
59 GPR Radiator Hose
Discharge Only
47 Fuel Oil Delivery 250 PSI 51 PVC Suction FDA (Polywire) Fire Hose
54 Petroleum Composite 41 Clear/Green PVC Suction Composite Hose
54 Petroleum, Bottom Loading Composite 42 Water Discharge Ducting Hose
54 Vapor Recovery Composite Metal Hose & Exp Joints
41 EPDM Suction Brake, Automotive Hose
56 Stainless Steel Metal Hose 40 Rubber Water Suction
44 Liquid Mud 500 PSI Clear with Orange Helix Water Suction Ind Hose Connections,
40
44 High Pressure Water Jetting Protection
48 EPDM Steam 250 PSI
35 Tank Truck Corrugated 500 PSI 59 Silicone Heater Hose Hammer Unions
39 Multipurpose Suction 46 Liquid Propane Gas 300 PSI
Flow Iron,
37 Mud Pump Suction 36 Oilfield Vacuum 150 PSI Frac Tank Supplies
37 Tank Truck 300 PSI Built-In Fixed x Floating Flange 39 Yellow Wire Braid Air
46 Yellow Multipurpose Air 500 PSI Pipe Fittings, Flanges
Page Material Handling MH
40 Petroleum Lightweight Gas Drop Prod, Drill &
56 Interlocked Metal Hose 34 Tank Truck 150 PSI Well Serv Products
55 Thermoplastic Urethane Ducting 34 Tank Truck Corrugated 150 PSI
Hyd ACMPV, Filter Carts
45 Sandblast 44 Potable Water FDA
43 Dry Material Discharge 75 PSI 59 Silicone Coolant Hose Belts, Sheaves, Bushings
43 Dry Material Discharge 150 PSI 42 Frac/Blender Discharge 150 PSI
Blender Discharge 300 PSI Valves
45 Concrete Pumping 42
42 FracARC Discharge 400 PSI Instrumentation
Page Low Temperature LT 53 Fire Assemblies
36 Tank Truck Corrugated Low Temp 150 PSI Gauges
59 Steel Brake Line Tubing Assemblies
56 Stainless Steel Metal Hose
59 Thermoplastic Rubber Ducting -60° F Quick Couplings
36 Tank Truck Ribbed 150 PSI
59 Silicone Heater Hose -65° F
53 Booster Hose Steel Adapters
59 Silicone Coolant Hose -65° F
54 Petroleum Composite
36 Tank Truck Corrugated Low Temp 150 PSI -65° F Brass Fittings
54 Petroleum, Bottom Loading Composite
55 Thermoplastic Urethane Ducting -65° F
35 Tank Truck 300 PSI
54 Petroleum Composite -40° F
38 Chemical Hose 200 A Air
54 Petroleum, Bottom Loading Composite -40° F
49 Heated Water Hose
54 Vapor Recovery Composite -40° F C Chemical
37 Tank Truck 300 PSI Built-In Fixed x Floating Flange
54 Chemical Composite -40° F F Fracking
54 Chemical Composite
54 Chemical (Agressive) Composite -40° F F&B Food and Bev
54 Chemical (Agressive) Composite
54 Chemical (Premium) Composite -40° F
54 Chemical (Premium) Composite G&W Gas and Welding
55 U-Lok 1000 Ducting -200° F
37 Mud Pump Suction V Ventilation
37 Short Frac Tank Assemblies O&G Oil and Gas
Page Static Wire Discharge Hoses 35 Tank Truck Corrugated 500 PSI MH Material Handling
39 Multipurpose Suction LT Low Temp
47 Farm Tank Fuel 50 PSI
38 Chemical Hose 400 PSI
47 Fuel Oil Delivery 250 PSI S Steam
44 Liquid Mud 500 PSI
40 Petroleum Lightweight Gas Drop W Water
44 High Pressure Water Jetting
Concrete Pumping Primary Use
Page Steam S 45
33
Industrial Hose
Hammer Unions
Flow Iron,
Frac Tank Supplies
34
Industrial Hose
Flow Iron,
Frac Tank Supplies
Threaded industrial
!
MIDWEST HOSE
hose assemblies MIDWEST HOSE MIDWEST HOSE MIDWEST HOSE
MIDWEST HOSE
35
Industrial Hose
Why Midwest Hose? Oilfield Vacuum 150 PSI W.P. OILFIELD VACUUM
MWHOVC150-64 4” ID
Layflat Hose Program
Corrugated 150 PSI -40° to 180° F -40° to 82° C SUCTION & DISCHARGE
Valves
Instrumentation
36
Industrial Hose
Quick Couplings
Assembled with female frac tank ends crimped G&W Gas and Welding
with short ferrules designed to maintain Tank Truck Corrugated flexible, more durable. 30 in/HG full vacuum V Ventilation
maximum flexibility. Tank Truck Ribbed most flexible, easiest to keep straight. 25 in/HG vacuum O&G Oil and Gas
MH Material Handling
LT Low Temp
S Steam
W Water
Primary Use
LAYMFDTRL
Manifold to Figure 100 Frac Figure 100
Manifold Trailers Splitter Valve Tank Threaded Blind Flange Gaskets Frac Tank Tee
37
Industrial Hose
Why Midwest Hose? Chemical Hose 400 PSI 400 PSI W.P. CPE TUBE CHEMICAL
Hoses have a higher working CHEMCPE400-64 4” ID -40° to 180° F -40° to 82° C SUCTION & DISCHARGE
Hydraulic Hose Program UHMW handles almost every 400 PSI W.P. UHMW CHEM ARC COVER
Rubber CHEMUHMWARC400-64 4” ID -40° to 180° F -40° to 82° C SUCTION & DISCHARGE
common industrial chemical used
Thermoplastic
Teflon in industry today (98% of chemicals)
SPEC SHEET ORDER
Crimp Fittings without staining / contamination. Tube UHMW
Crimp Machines Cover Corrugated Special Abrasion Resistant Cover
Industrial Hose Program Reinforcement Multiple textile plies, (ARC) is 10 times more abrasion resistant than ISO 6945 requirements
Suction & Discharge dual helix wire
Discharge Only Safety Factor Minimum 3 to 1 C
r
Fire Hose W
W Bend Coil
Composite Hose
Ducting Hose
-40° F to 250° F Item ID OD Max WP Suction Radius Weight Length
Metal Hose & Exp Joints inch inch psi in./HG inch lbs/ft feet
Brake, Automotive Hose Smooth
Cover
4 4.99 30 Full 28.0 3.25
Ind Hose Connections, 400 100
Protection Corrugated Vacuum
Cover 4 4.99 24.0 3.25
Hammer Unions
TEST DOCUMENTATION
Flow Iron,
Frac Tank Supplies
Camlock Type C Stainless Sch. 40 2 Piece Reduced Port TODO Hose Unit
STA-LOK II Street Elbow 90 316SS 1,000 PSI Ball Valve Stainless Schedule 40 TEE Couplers and Adapters
38
Industrial Hose
39
Industrial Hose
Why Midwest Hose? Rubber Water Suction 150 PSI W.P. BLACK RUBBER SUCTION
Designed for water, salt water, and MWHBRS150-64 4” ID -40° to 180° F -40° to 82° C SUCTION & DISCHARGE
40
Industrial Hose
Hammer Unions
Flow Iron,
Frac Tank Supplies
W Quick Couplings
-10˚ F to 130˚ F r
W Coil
Bend Steel Adapters
ID OD Max WP Suction Radius Weight Length
inch inch psi in./HG inch lbs./ft. ft. Brass Fittings
1 1.27 90 3 .27
A Air
1-1/4 1.56 90 4 .36
C Chemical
1-1/2 1.82 90 5 .47
F Fracking
2 2.36 70 28 6 .66
100 F&B Food and Bev
2-1/2 2.90 65 8 .92
G&W Gas and Welding
3 3.44 55 9 1.20
V Ventilation
4 4.52 50 13 1.87
O&G Oil and Gas
6 6.80 45 24 4.56
MH Material Handling
TEST DOCUMENTATION
LT Low Temp
S Steam
W Water
Primary Use
Camlock D, Camlock A,
Round and Square Quick Opening Sightglass, and Funnel
Hole Strainers Gate Valve Foot Valves Strainer Assembly Pin Lug Couplers
41
Industrial Hose
Why Midwest Hose? Frac Discharge 400 PSI W.P. FRAC HOSE ARC COVER
MWHFRACARC400-64 4” ID -40° to 180° F -40° to 82° C DISCHARGE USE ONLY
42
Industrial Hose
Dry Material Discharge 75 PSI Why Midwest Hose?
Designed for dry bulk transfer of
bulk cement, grains, animal feed, 75 PSI W.P. DRY MATERIAL 3/16 TUBE Layflat Hose Program
MWHDRYMAT75L-64 -40° to 180° F -40° to 82° C DISCHARGE USE ONLY
Steel Adapters
Brass Fittings
A Air
C Chemical
F Fracking
F&B Food and Bev
G&W Gas and Welding
V Ventilation
O&G Oil and Gas
MH Material Handling
LT Low Temp
S Steam
W Water
Primary Use
43
Industrial Hose
Why Midwest Hose? Liquid Mud 500 PSI 500 PSI W.P. LIQUID MUD & FUEL DELIVERY
Mud discharge hose designed for LIQUIDMUD500-64 -40° to 180° F -40° to 82° C DISCHARGE USE ONLY
44
Industrial Hose
Concrete Pumping Why Midwest Hose?
Designed to handle plaster, grout, and 800 PSI W.P. CONCRETE PUMPING
MWHTEXCON800-XX -40° to 180° F -40° to 82° C SUCTION & DISCHARGE
concrete at the critical flex areas of a Layflat Hose Program
concrete boom truck and high pump
SPEC SHEET ORDER Rotary Hose Program
concrete boom. Part Number MWHTEXCON800-XX
Info, Fittings
Tube SBR/EPDM Cover SBR/EPDM Choke & Kill, BOP
1275 PSI W.P. CONCRETE PUMPING
Reinforcement System textile or high MWHWIRECON1275-48 -40° to 180° F -40° to 82° C SUCTION & DISCHARGE Rotary
intensity steel wire
Hydraulic Hose Program
Safety Factor Minimum 2 to 1 SPEC SHEET ORDER Rubber
Part Number MWHWIRECON11275-XX
(per CPMA standards) Thermoplastic
MH Teflon
r Crimp Fittings
-40° F to 180° F Bend W Coil Crimp Machines
W Hose
ID OD Max WP Radius Weight Length Industrial Hose Program
inch inch psi inch lbs/ft feet Suction & Discharge
2 2.68 12 1.45 Discharge Only
50 Fire Hose
Textile 3 3.75 15 2.40
800 Composite Hose
4 4.81 18 4.06
100 Ducting Hose
5 6.30 24 5.60 Metal Hose & Exp Joints
2 2.78 24 1.74 Brake, Automotive Hose
Wire 3 3.29 36 4.05 100
1275 Ind Hose Connections,
4 5.02 40 5.95
Protection
5 6.00 60 7.44 12.5
TEST DOCUMENTATION Hammer Unions
Flow Iron,
Frac Tank Supplies
Sandblast SANDBL150-12 3/4” ID SANDBLAST HOSE 150 PSI W.P.
Designed for sand, steel, shot, or other Part Number SANDBL150-XX SPEC SHEET ORDER Pipe Fittings, Flanges
sharp abrasives to handle cleaning, cutting,
Prod, Drill &
or finishing stone, glass, or metal surfaces. A
r Well Serv Products
Static conductive tube prevents the Bend W Coil
MH Hyd ACMPV, Filter Carts
build up of electrical charges. ID OD Max WP Radius Weight Length
inch inch psi inch lbs/ft feet Belts, Sheaves, Bushings
Tube SBR/Natural rubber blend 3/4 1.50 8 .57
Cover SBR/EPDM blend pin pricked 1.88
Valves
1 12 .94
Reinforcement Synthetic textile 2.13 150 100
1-1/4 14 1.18 Instrumentation
Safety Factor Minimum 4 to 1 Nozzle Blast Guide 1-1/2 2.38 18 1.35
2 2.78 20 1.74 Gauges
-40° F to 180° F TEST DOCUMENTATION
Quick Couplings
Steel Adapters
Brass Fittings
A Air
C Chemical
F Fracking
F&B Food and Bev
G&W Gas and Welding
V Ventilation
O&G Oil and Gas
MH Material Handling
LT Low Temp
S Steam
W Water
Primary Use
Internal Expansion California California Style Sand Blast Sand Blast Nozzle
Style Hose End Coupling Quick Coupling Hose Straps Holder Coupling
45
Industrial Hose
Push-On Hose Spring Ball Cone Brass Crowsfoot SAE 45° Flare
Whip Checks Barb Fittings or SS316 Check Valve Couplings Brass Fittings
46
Industrial Hose
Fuel Oil Delivery 250 PSI FUELDEL250-XX 1” 250 PSI FUEL OIL DELIVE Why Midwest Hose?
Designed to transfer fuel oils, diesel,
or commercial gasolines. Compatible Layflat Hose Program
Part Number FUELDEL250-XX SPEC SHEET ORDER
with bio-diesel fuels up to B20.
Rotary Hose Program
Smooth cover resists dragging. Static Info, Fittings
wire included on all sizes. O&G Choke & Kill, BOP
r
W Rotary
Bend Coil
Tube Nitrile RMA Class A
ID OD Max WP Radius Weight Length Hydraulic Hose Program
Cover Nitrile RMA Class A/PVC blend Rubber
Reinforcement 4 textile spirals inch inch psi inch lbs/ft feet
Thermoplastic
Safety Factor Minimum 4 to 1 1 1.5 7 0.47 100, Teflon
1-1/4 1.78 8.75 0.59 125, Crimp Fittings
250
-40° F to 212° F 1-3/8 1.88 9.25 0.65 150, or Crimp Machines
1-1/2 2.09 10.5 0.80 175 Industrial Hose Program
Gasoline normally transferred below 120 ° F TEST DOCUMENTATION Suction & Discharge
Discharge Only
Fire Hose
Composite Hose
Ducting Hose
Farm Tank Fuel 50 PSI Metal Hose & Exp Joints
Brake, Automotive Hose
For gravity or electric pump dis-
pensing of oil, gasoline, diesel, and FARMTANK50-16 1” 50 PSI FARM TANK FUEL Ind Hose Connections,
petroleum products. Typically used Protection
Part Number FARMTANK50-XX SPEC SHEET ORDER
with farm or barrel-type pumps Hammer Unions
where UL approval is not required.
Has static wire, A Flow Iron,
r Frac Tank Supplies
designed for use with electric pumps. O&G Bend W
Reel
ID OD Max WP Radius Weight Quantity Pipe Fittings, Flanges
NOT for gas station use. Only UL 330 W
inch inch psi inch lbs/ft feet
listed hose used for gas station use. Prod, Drill &
3/4 1.12 5 .35 700 Well Serv Products
NOT for aircraft fueling. 50
1 1.38 8 .47 700
TEST DOCUMENTATION Hyd ACMPV, Filter Carts
Tube Nitrile RMA Class A
Cover Nitrile RMA Class A/PVC blend Belts, Sheaves, Bushings
Reinforcement 4 textile spirals
Valves
Safety Factor 4 to 1
Instrumentation
-20° F to 160° F
Gauges
Quick Couplings
Steel Adapters
Brass Fittings
A Air
C Chemical
F Fracking
F&B Food and Bev
G&W Gas and Welding
V Ventilation
O&G Oil and Gas
MH Material Handling
LT Low Temp
S Steam
W Water
Primary Use
Hose Barb 2 Piece Full Port Worm Gear TBC, HTBC and
Fittings Ball Valves Clamps HDTBC Clamps Teflon Tape
47
Industrial Hose
Why Midwest Hose? EDPM Steam 250 PSI MWHSTEAMBK250-32 2” 250 PSI EPDM STEAM
Wire braid steam hose for saturated
Layflat Hose Program and superheated steam up to 250 Part Number MWHSTEAMBK250-XX SPEC SHEET ORDER
PSI and 450° F. Cover is pin pricked
Rotary Hose Program
Info, Fittings
to allow venting to eliminate
Choke & Kill, BOP blistering and cover seperation. MWHSTEAMRD250-32 2” 250 PSI EPDM STEAM
Rotary
Steel wire braids can be utilized Part Number MWHSTEAMRD250-XX SPEC SHEET ORDER
Hydraulic Hose Program as a static wire to make the hose
Rubber 1” and 2” only
Thermoplastic assembly electrically conductive. S
Teflon r
W Coil
Crimp Fittings NOT for use with detergents. Bend
Crimp Machines DRAIN AFTER USE! ID OD Max WP Radius Weight Length
Industrial Hose Program inch inch psi inch lbs./ft. ft.
Suction & Discharge Tube Nitrile (NBR) premium steam hose
1/2 1.00 5.9 0.40
Discharge Only Cover Neoprene (CR) 1/2”, 3/4”, 1” sizes 3/4 1.25 8.3 0.51
Fire Hose
Reinforcement Multiple 1 1.50 11.0 0.67
Composite Hose
Ducting Hose wire braids 1-1/4 1.81 14.0 0.87
MWHSTEAMBK250-32 2”
2”
25
0
250 100
Metal Hose & Exp Joints
-40° F to 450° F EAM
BK
25
0-3
2
1-1/2 2.13 16.5 1.11
HST
MW
Brake, Automotive Hose 2 2.64 22.0 1.80
temp range MWHSTEAMBKCHL
Ind Hose Connections, Chlorobutyl Steam Hose
Steam Temperature 2-1/2 3.21 25.0 2.32
Protection 250 PSI WP Chart 3 3.81 30.0 3.17
TEST DOCUMENTATION
Hammer Unions
Flow Iron, PVC Air 300 PSI MWHPVCAIR300BU06 3/8” ID PVC AIR HOSE LOW OIL RESISTANCE
Frac Tank Supplies General purpose hose that can Part Number SPEC SHEET ORDER
Pipe Fittings, Flanges handle air, water, oil, mist, and MWHPVCAIR300BUXX
mild chemical applications.
Prod, Drill & Tube PVC Cover PVC A
r
Well Serv Products Reinforcement 2 textile spirals W Reel
W Bend
Hyd ACMPV, Filter Carts Safety Factor 3 to 1 ID OD Max WP Radius Weight Quantity
inch inch psi inch lbs./ft. ft.
Belts, Sheaves, Bushings
-10° F to 150° F 1/4 0.5 1.5 .09
Valves 3/8 0.63 300 2.25 .14 600
1/2 0.78 3.00 .18
Instrumentation
TEST DOCUMENTATION
Gauges
TTrigger
i Bl
Blow Inline Air Filters Manual and 2, 4, and 6
Globe Valves Gun and Regulators Retractable Hose Reels Bolt Clamp
48
Industrial Hose
Gauges
Quick Couplings
Contractors Water W W
50 foot length 12’, 25’, 50’, or 100’ lengths Steel Adapters
Assemblies 5/8” or 3/4” Tested to -42° F
Coupled Male x Female with Brass Fittings
brass Garden Hose Threads.
Designed for water transfer A Air
49
Industrial Hose
Hammer Unions
Layflat Discharge W
General purpose hoses for open end discharge. Roll
Wall
Flow Iron, Non-absorbing, mildew proof, and rolls up flat for easy storage and Hoses ID Thickness Max WP Burst Length
Frac Tank Supplies handling. Common in construction, agriculture, irrigation, marine, inch psi psi ft.
and rental applications PVC hoses resistant to oils, grease. 1 .052 110
Pipe Fittings, Flanges
Tube and cover are extruded simultaneously to achieve Blue 1-1/4 .056
Prod, Drill & maximum bonding. Gray 1-1/2 .059 80
Well Serv Products Reinforcement Polyester yarn PVC 2 .059
Minimum
2-1/2 .059 65 3 to1 300
Hyd ACMPV, Filter Carts Standard 3 .063 80
Blue PVC Duty 4 .067 70
Belts, Sheaves, Bushings
Standard Duty 6 .075 60
Valves BD-XX 8 .087 35
1-1/2 .079
-5° F to 170° F Red
Instrumentation 2 .087 150
PVC
3 .095 Minimum
3 to1 300
Gauges Gray PVC 4 .102 125
Heavy
Standard Duty 6 .119 115
Duty
Quick Couplings 8 .134 70
GD-XX
1-1/2 .08
Steel Adapters -5° F to 170° F Black 200
2 .08
PVC/ 200
Brass Fittings 3 .08 175
Nitrile
Red PVC 4 .10 Minimum
Blend
6 .12 150 3 to1
Standard Duty
8 0.12
REDHD-XX Super 100/
10 0.14
Duty 150 660
-5° F to 170° F 12 0.14
TEST DOCUMENTATION
Black PVC/Nitrile
Super Duty
MWHWARFLEX-XX
-20° F to 176° F
50
Industrial Hose
Instrumentation
51
Industrial Hose
Quick Couplings A
-40° F to 135° F
W
Steel Adapters F&B Wall
Safety Factor 3 to 1 Hoses ID OD Thickness Max WP Weight
Brass Fittings W inch inch psi lbs./100ft.
Colors Natural off white (NA), inch
Black (BK), Yellow (YW), Orange (OR), Blue (B), PE-04NA-500 .125 0.25 .0625 350 1.24
Red (R), Green (G), or FDA colors upon request. PE-44NA-500 .170 0.25 .040 150 1.2
Fittings Push-Connect, Self-Align, Mini Barb, PE-06NA-500 .250 0.375 .0625 150 3.0
and Compression with 2030 inserts. PE-08NA-500 .375 0.5 .0625 125 3.4
PE-10NA-500 .500 0.625 .0625 100 5.0
PE-12NA-100 .625 0.75 .0625 100 5.5
PE-04MMNA-500 .106 4mm .025 180 0.6
PE-06MMNA-500 4mm 6mm 1mm 150 1.1
PE-08MMNA-500 .236 8mm .038 150 1.5
PE-10MMNA-500 8mm 10mm 1mm 125 2.1
PE-12MMNA-500 9mm 12mm 1.5mm 100 2.5
TEST DOCUMENTATION
52
Fire Hose
Designed for open end
Single Jacket Mill Hose discharge applications. Uses
W W Why Midwest Hose?
include connections to fire SP Bowl Weight Per
Item ID psi Size 50’ Uncpld. Layflat Hose Program
hydrants, dust control water
trucks, water spraying, and MILL-24 1.5” 1-3/4” 10 lbs. Rotary Hose Program
water discharge. Immune to MILL-32 2” 2-1/4” 11.5 lbs. Info, Fittings
mildew. Choke & Kill, BOP
MILL-40 2.5” 250 2-11/16” 17 lbs. Rotary
Tube Single ply synthetic rubber
MILL-48 3” 3-1/4 21 lbs.
Cover Polyester Hydraulic Hose Program
Length up to 100 feet MILL-64 4” 4-3/8” 40 lbs. Rubber
Thermoplastic
SPEC SHEET ORDER
Teflon
Crimp Fittings
Crimp Machines
Double Jacket Mill Hose Double jacket for rugged W Industrial Hose Program
W
environment. Immune to mildew. Suction & Discharge
Tube Single ply synthetic rubber SP Bowl Weight Per Discharge Only
Item ID psi Size 50’ Uncpld. Fire Hose
Cover Double jacket polyester Composite Hose
MILLDJ-24 1.5” 1-13/16” 12.95 lbs
Length up to 100 feet Ducting Hose
MILLDJ-32 2” 300 2-5/16” 17.95 lbs Metal Hose & Exp Joints
MILLDJ-40 2.5” 2-7/8” 23.6 lbs Brake, Automotive Hose
Hammer Unions
Gauges
Quick Couplings
Booster Hose BOOSTER800-16 800 PSI SERVICE PRESSURE
Preconnected to pump of an engine (and Steel Adapters
the booster tank) for putting out small fires
near the tank without having to connect to W Brass Fittings
a fire hydrant (brush pumper). Coupling W
Adjustable Hydrant
y Fire Hose Fittings
Wrenches and Spanner Fire Hose Fire Truck Explanation, NPFA
Brass Hydrant Adapters Wrenches N l
Nozzles Rack Assembly Diagram Accessories Diagram Pressure Ratings Definition
53
Composite Hose
Hammer Unions C C C
1” - 8” 250 psi 1” - 8” 250 psi 1” - 8” 250 psi
Flow Iron,
Petroleum Petroleum, Bottom Loading Vapor Recovery
Frac Tank Supplies
Applications marine, plant processing, rail Applications Bottom Loading at bulk Used in petroleum and petrochemical
cars, ship-to-shore, and tank trucks distribution and production refinery vapor recovery systems in ship-to-shore,
Pipe Fittings, Flanges facilities. bottom loading, and tank truck
applications. USCG 33CFR approved.
Prod, Drill &
Well Serv Products Liner poly fabric Liner poly fabric Liner poly fabric
Cover blue poly fabric Cover blue poly fabric Cover yellow poly fabric
Hyd ACMPV, Filter Carts Inner Wire G Inner Wire G Inner Wire G
Outer Wire G Outer Wire G Outer Wire G
Belts, Sheaves, Bushings
O&G
Valves O&G O&G
1” - 8” 250 psi
10” 150 psi 3”, 4” 200 psi 4”, 6”, 8”, 10” 100 psi
Instrumentation
Gauges
Hose Cross Section
Quick Couplings Flanged Ends: Ferrule: Polypropylene or Fluoropolymer Inner Layers
DESIGN OPTIONS
• Carbon Steel • Coated Steel Multiple Polypropylene Layers
Steel Adapters Liner Polypropylene • Stainless Steel • Stainless Steel Seamless Tubes
PTFE Multiple Polypropylene Layers
Brass Fittings Inner Wire G Galvanized Steel Abrasion & Ozone Resistant Outer Cover
P Polypropylene Coated Steel
6 Stainless Steel 316
Outer Wire G Galvanized Steel
6 Stainless Steel 316
Fittings Carbon Steel
Stainless Steel
Aluminum Tailpiece: External Helical Wire: Internal Helical Wire:
Polypropylene
• Carbon Steel • Galvanized Steel • Galvanized Steel
• 316 Stainless Steel • Stainless Steel • Polypropylene Coated Steel
• PTFE coated • Stainless Steel
Male Pipe Male Camlock Female Camlock ANSI 150# & 300# Dry Break Safety Breakaway
Threads Fixed/Floating Flanges Couplings Couplings
54
Ducting Hose
Highly compressible E-Glass and • Best for extreme hot air and vehicle
ceramic fabric, reinforced with external exhaust applications Ducting FAQ
U-Lok 1000 steel helix. • Crimped construction uses no adhesives
Ultra-High or glues
Temperatures • Available with extra plies for heat resistance
A-Z
Diameter Range: 2” to 24” • 6 to 1 compression ratio Glossary
55
Metal Hose
Annular, expands Braid
if no braid
Belts, Sheaves, Bushings Interlocked Metal Hose Smooth Bore (lined)) Rough Bore (unlined))
is stronger, more is used for Agriculture,
Valves SPEC SHEET ORDER flexible, and used for Brewing,
wing, Lumber, Chemical, Tank Truck,
uck,
Designed for hot air blower lines and dry bulk Cement, Food Processing, M Mining, Petroleum Refining, and
Instrumentation
material transfer/transport. Up to 100’ lengths in and Plastic Pellets. DO NOT twist Municipalities.
Gauges sizes 1.5” to 10”. hose. End Types
Armor Strip
10 .010” Extra Light Weight
15 .015” Light Weight
18 .018” Medium Weight
25 .025” Heavy Weight
30 .025” Extra Heavy Weight
Camlock C Threaded Camlock E Threaded Neoprene FOA Camlock A Camlock D
Alum or SS Swivel Alum or SS Swivel Gasket Alum or SS Alum or SS
Max
Type Features Temp
LE Low-Temp Elastomeric Max Pressure
and Vacuum 200°F
HE High-Temp Elastomeric Max Pressure 400°F
and Vacuum
Packing Material
Pressure and vacuum LF Low-Temp Fiber Economical 180°F Packed hose
adds 10% to Interlocked
capabilities are enhanced HT High-Temp Fiber High-Temp 1000°F Metal Hose
Filament weight and
by selecting appropriate minimum Applications
packing material M Metal Extreme Temp 800-1200° bend radius
Guide
56
Expansion Joints
Purchasing Questionnaire Applications
Expansion Joints • Pipe size • Fossil Fuel Power Generation Why Midwest Hose?
Expansion joints are used to accommodate the movement • Pumped medium: type of liquid, gas, or • Gas Turbines
vapor used • Petroleum Refining Layflat Hose Program
of pressurized piping systems caused by thermal growth,
pressure contraction, machine vibration, seismic disturbances • Temperature range, type of environment • Chemical Processing
Rotary Hose Program
and installation irregularities. The expansion joint will carry • Pressure/Vacuum Range • Hot Metal Industries
Info, Fittings
numerous types of media including steam, emission gases, • Movements Needed • Ship Building
Choke & Kill, BOP
water, acids, alkalies and hydrocarbons. • Degree of pipe misalignment • Absorb Vibration Rotary
• Installed face-to-face dimensions • Reduce Noise
• Need retaining rings? • Steam Distribution Hydraulic Hose Program
• Need for control units? Recommended for • HVAC Rubber
use with most expansion joints, must be • Pulp & Paper Processing Thermoplastic
used in cases of insufficient pipe support • Heat Exchangers Teflon
• End connections • Fume Exhaust Crimp Fittings
Crimp Machines
Expansion Joint
Installation Expansion Joint Industrial Hose Program
Guide Key Concepts Suction & Discharge
Discharge Only
Fire Hose
• Rated for full vacuum Composite Hose
PTFE Ducting Hose
• More economical than metal
• Excellent chemical resistance Metal Hose & Exp Joints
Brake, Automotive Hose
Chemical Resistance Comes with a
inside and out Control Unit which Ind Hose Connections,
extends the life Protection
span by limiting
movement Hammer Unions
Flow Iron,
Frac Tank Supplies
Rubber • Lighter weight than metal • Insulates sound better than metal Belts, Sheaves, Bushings
• Greater recovery from movement • No gaskets required
• Reduced heat loss • Most economical Valves
• More corrosion and erosion resistant
For land rigs For ocean rigs Used with abrasives Instrumentation
1” -30”
30 1” -30”
30 1”-120” (Double or triple
arch available) Gauges
Quick Couplings
Steel Adapters
Brass Fittings
57
Brake Hose
Instrumentation
y
People Also Buy
Gauges
Quick Couplings
58
Automotive Hose
Silicone Heater For the most extreme temperatures and hostile Belts, Sheaves, Bushings
• Heater hoses on cars, engine environments. Longer service life than
Hose trucks, buses, and RV’s rubber. Resistant to coolants, cold leaks, cracking, Valves
• SAE J20 R3 Class A peeling, aging, and ozone.
Temperature Range -65 F to 350 F Instrumentation
Lengths 25’, 50’, 100’, and reels Constant
W Size Range 3/16” to1-1/4” Torque Clamp TBC Clamps Gauges
GPR Radiator Hose Designed for use in engine cooling systems.
• Radiator hoses on cars, Quick Couplings
Intended for use as an upper radiator hose. Can be
trucks, buses, and RV’s
used in many automotive, marine, and industrial
applications. Steel Adapters
Size Range 3/4” to 5-1/2”
Brass Fittings
Worm Gear
W Clamps TBC Clamps
A replacement hose for cars and light trucks.
Rubber Heater • Heater hoses on cars, Resistant to coolants and weathering.
Hose trucks, buses, and RV’s Temperature Range -40 F to 212 F
Sizes 3/8”, 1/2”, 5/8”, 3/4”, and 1”
HEATER HOSE
59
Industrial Hose Connections
1/2” - 10” A,B,D,P,SS 1/2” - 10” A,B,D,P,SS 1/2” - 10” A,B,D,P,SS 1/2” - 10” A,B,D,P,SS 1/2” - 10” A,B,D,P,SS
Why Midwest Hose?
Prod, Drill & DC STA-LOK II CxC STA-LOK II CxA STA-LOK II ASV BSV CSV
Well Serv Products Dust Cap Coupler x Coupler Coupler x Adapter Adapter-Swivel x FP Coupler-Swivel x MP Coupler-Swivel x Shank
(short or long)
Hyd ACMPV, Filter Carts 1-1/2” - 6” A,SS 1-1/2” - 6” A,SS 1-1/2” - 6” A,SS 2” - 8” A relieve pressure A,SS relieve pressure on SS
Forr dry bulk on hose before hosee before detachment
Belts, Sheaves, Bushings detachment
Valves
Instrumentation
DSV ESV FSV
Gauges Coupler-Swivel x FP Adapter-Swivel x Shank Adapter-Swivel x MP Hopper Tee Coupler
oupler x Adapter
Adapte Spool Adapter
Groove x Groove x FL150 with Relief Nipple with Relief Nipple
Quick Couplings 2”-4” P 3” - 6” A,B,D,SS 3” - 6” A,B,D,SS 3” - 4” A
Petroleum
Steel Adapters
Handling
Brass Fittings
60
Industrial Hose Connections
2” - 4” D 2” - 4” S 2” - 8” S 1/2” - 12” A,B,S,SS 1/2” - 12” A S SS 1” - 12” S,SS
Why Midwest Hose?
Flow Iron,
Crowsfoot Frac Tank Supplies
Couplings Pipe Fittings, Flanges
Valves
Ground
3/4”-2” MI,S S Bauers 2”-12” S 2”-12” S
Style
Joint
Quick
Couplings Connects
_GF MC FC
Complete Female Female, Male, Male x Barb Female x Barb
Double Spuds
2”-8” S 2”-8” S S 2”-12” S
61
Industrial Hose Connections
Used for 10”-12” only S 4”-10” A 4”-10”
0 A 4”-12” A 4”-12” A
Why Midwest Hose?
Valves
Instrumentation
690,
90 698
698, 699 S506 S685-4 684 S1090-
Gauges Air Chucks Inflator Manifold Tank Valve Pop-Off Breather Vents, Mufflers
Quick Couplings
A Aluminum Tire Gauges Inline Air Filters Hose Reels Hose Floats Cushion Clamps
and Regulators Manual or Retractable
B Brass Universal, Tractor
D Ductile (Iron)
CI Cast Iron
MI Malleable Iron
S Carbon Steel
SS Stainless Steel
Hydraulic Oils Wrenches Duct Tape Teflon Coating Teflon Tape Service Plug
Clamps
Worm Gear
Single & Double Bolt 2, 4, and 6 Bolt Spiral Clamp Worm Gear Clamp Lined Worm Gear
Clamp Clamp Clamp
62
Safety & Protection Products
9/16” - 8-1/4” S,SS
, 1” - 13”
3 3/16” - 2” S,SS 13/16” - 8” S,SS 3/8” - 1-
1-1/4”
-1/
1/4 S,SS
S,S
S, S
Why Midwest Hose?
Valves
Instrumentation
Fire Sleeve Hose Sleeve with Abrasion Shields Bend Restricter Heat-Shrinkable Clean Hose Straps Gauges
Velcro (hot dog buns) Seal Capsule
Hose ID 1/2” - 4” for Hose ID 1/2” - 4” for Hose ID 1/2” - 4” Put on all rotary Threaded industrial
assemblies hose assemblies
Quick Couplings
use in water
Steel Adapters
A BACK UP WRENCH IS REQUIRED FOR ATTACHING ANY FITTING
Threaded industrial
!
MIDWEST HOSE
hose assemblies MIDWEST HOSE MIDWEST HOSE MIDWEST HOSE
MIDWEST HOSE
Brass Fittings
Fig 100 Fig 206 Fig 400 & 602 Fig 1002 Fig 1003 Fig 1502 Plastic
Plastic Cap & Plug Plastic Cap & Plug Plastic Cap & Plug Plastic Cap & Plug Plastic Cap & Plug Cap & Plug
3” - 20” 1/4” - 8” 3/4” - 3
3” S, M, L, XL, XXL Popular as BOP
hose restraints
Hammer Seals Cap Threaded Plastic Caps Code 61, Code 62 Wearable Gear Nylon Hose Halter Lifting Slings
& Plugs Aluminum Caps
63
Hammer Unions
Brass Fittings
XXH
Buttweld
Figure 602 Figure 1002 Figure 1003 Figure 1502 Figure 2202
XXH XXH XXH XXH XXH
AISI 4140 AISI 4140 AISI 4130 AISI 4130 AISI 4130
An airgrip union CWP 2,000 psi
Any other unions
has a compression such as buttweld
seal, weld male schedule 40 & 80
and sour gas unions.
end to a pipe and Applications Guide
push another pipe
through nut and Fig 100 manifold and general service
o-ring then tighten AIRGRIP, MUDTANK Go/No-Go Gauges, Fig 200s general purpose
Airgrip union 200 psi Replacement O-Rings Fig 400, 602 manifold pumping and mud
nut. with 12-15˚ max Figure 206
misalignment 2 Piece Nuts Fig 1003 high pressure applications where
the lines are not aligned
Fig 1002, 1502 choke & kill lines, cementing,
fracturing, and acidizing
Fig 2202 sour gas services
64
Flowline, Frac Tank Supplies
Hammer Unions
Flow Iron,
Straight
Straig
Straight
ht Frac Tank Supplies
Gauges
Quick Couplings
Steel Adapters
Brass Fittings
Female
ale Male
65
Pipe Fittings & Flanges
Hammer Unions
Flow Iron,
Frac Tank Supplies
Instrumentation
S40BUNI-•• S80BNIP-•••••IN S80BCAP-•• S80BBCP-•• S80BRCP-••
Gauges Union Lower pressure than Nipple Cap Coupling Bell Reducer
forged steel
Quick Couplings
Steel Adapters
Brass Fittings
66
Pipe Fittings & Flanges
Hammer Unions
Flow Iron,
Frac Tank Supplies
Schedule 40 Valves
Instrumentation
FSBT•KTEE-•• FSBT•KRTE-•• FSBT•KUNI-•• S40•NIP-••-••IN S40•HBU
Tee Reducing Tee Union Use in salt water, chemical and Nipple Hex Bushing
other harsh environments.
Gauges
Quick Couplings
Steel Adapters
Brass Fittings
Grooved
Nipples,
We also carry stainless Fittings &
tubing, ball valves, and
hammer unions Couplings
S40•UNI S40BGG-••-••IN S40BGT S40BGP-••-••IN
Union Comparable to Victaulic Groove x Groove Groove x Threaded Groove x Plain
& Gruvlok
67
Pipe Fittings & Flanges
Prod, Drill & ••••CTT ••••ETG ••••CGT ••••CGG Threads 8RD, 10RD, 8V, 10V,
11-12V
Well Serv Products Concentric Ecccentric Concentric Groove Concentric Materials J55, K55, N80, L80 SCH40 Swage Nipples
Threaded x Threaded Threaded x Groove x Threaded Groove x Groove
Hyd ACMPV, Filter Carts
Valves
Instrumentation
NPT Threads S40•BPL S80•BPL XXH•BPL
SCH80 Swage Nipples XXH Swage Nipples Carbon Steel, 304SS or 316SS SCH40 Bull Plugs SCH80 Bull Plugs XXH Bull Plugs
Gauges
68
Pipe Fittings & Flanges
Instrumentation
S40BWE90LR S40BWCRED S40BWERED S40BWTEE S40BWRTE
Elbow 90 Long Concentric Reducer Eccentric Reducer Tee Reducing Tee Gauges
Available at some stores Available but not in stock Available but not in stock Available but not in stock
Quick Couplings
Steel Adapters
Brass Fittings
PVC Fittings Bronze Fittings Red Brass Nipples Olets Difference between ANSI and API Flanges
similar lightweight flanges Chart
69
Production, Drilling, and Well Service Products
This product line was started in Williston, North Dakota. We don’t call on drilling rigs or production companies direct.
Why Midwest Hose?
Customer pick up only!
Layflat Hose Program
Drill Slips,
Rotary Hose Program
Info, Fittings Elevators, &
Choke & Kill, BOP Tong Dies
Rotary
Hydraulic Hose Program Drill Slips Type C Safety Clamp Slip Elevators Slip Handles Tong Dies
Rubber
Thermoplastic
Teflon
Crimp Fittings Gate Valves,
Crimp Machines Shear Relief, &
Industrial Hose Program Float Valves
Suction & Discharge
Discharge Only
Fire Hose Mud Gate Valve Shear Relief Valve Float Valves
Composite Hose
Ducting Hose
Metal Hose & Exp Joints
Brake, Automotive Hose
Swivel Joints &
Ind Hose Connections,
Protection
Specialty Unions
Hammer Unions
Swivel Joints Seal & Grip Union Hammer Seal Union Pup Joints
Flow Iron,
Frac Tank Supplies
Valves
Quick Couplings Grooved End Check Threaded Check Valve Wafer Check Valve
Valve
Steel Adapters
Brass Fittings
Ring Gaskets Stud Bolts
Miscellaneous
Tubing Pump Modules, Liners for Mud Pumps,
Couplings Urethane and Rubber Diaphragms
for Pulsation, Packing Elements 11”
& 135/8” for GK and Spherical, Weld
J55 L80 Tubing Pup Joints
Fittings, Liquid Filled Gauges, Gaging
Tapes, Pipe Nipples 2”-10” Sch 40,
Pulsation,
Sch 80, XXH, Full Line of Swages and
Dampener,
Crossovers in J-55 and L-80, Full Line
Bladders, RAM
of 2”-4” Forged Steel Fittings in 2M,
Rubbers, & Pipe
3M, 6M Pressure Ratings, BOP Ram
Wipers Rubbers 7/16” Type 61 & 81, Parts for
Pulsation Dampener Pipe Wipers RAM Rubbers Gardner-Denver PAH Mud Pumps
Bladders
70
Hydraulic ACMPV, Filter Carts
Some of the product lines that we commonly work on: Rotary Hose Program
Hydraulic ACMPV Info, Fittings
Accumulators Actuators Cylinders Motors Pumps Valves
ACFMPV
C Brochure
h Choke & Kill, BOP
Accumulators, Inc. Moog Parker Char-lynn Rexroth Bosch Summer 2015 Rotary
Hydac Parker Hanna Staffa Vickers Rexroth
Bosch Rotork Hydro-line Eaton Eaton Vickers Hydraulic Hose Program
Parker Tolomatic Miller Vickers Denison Denison Rubber
Olaer Morin Vickers Danfoss Parker Moog Thermoplastic
Eaton Keystone Yates Permco Oil Gear Parker Teflon
Welded Style Rexroth Racine Crimp Fittings
Crimp Machines
Mill-Duty Denison Continental Hydraulic
Hagglunds Casappa Terminology Industrial Hose Program
Parker Permco Suction & Discharge
Filter Carts Discharge Only
Portable filter carts are the most economical way to protect your system from contamination. Fire Hose
Composite Hose
• Extends fluid life and system performance Ducting Hose
• Ready to use as received Metal Hose & Exp Joints
Brake, Automotive Hose
• Use to transfer fluid from drums or storage tanks to system reservoirs
• For use with fluids such as hydraulic, gear, and lube oils Ind Hose Connections,
SPEC SHEET ORDER
Protection
Extra length attachments to
access up to 5’ tank bottoms Valve to bypass filters to Includes 30 foot extension cord (not pictured) Hammer Unions
Eyelets to lift up in just change oil
the air by a cable
Cushioned handle Flow Iron,
Frac Tank Supplies
Used to dispense of
waste oil during oil Pipe Fittings, Flanges
change
Quick shutoff with gas Prod, Drill &
pump handle
Well Serv Products
1st set of filters Hyd ACMPV, Filter Carts
collects rocks and
Fold down/Detachable debris.
panels Belts, Sheaves, Bushings
2nd set of filters
separates water from Valves
oil.
Instrumentation
Easy on/off switch Large 13” x 5” tires
to 110v electric Inside/Outside use Gauges
motor
New Components Quick Couplings
Wide Range of Components available to fit customers specific application.
Steel Adapters
Pumps & Motors Valves Pressure Storage Cylinders &ůƵŝĚŝƐƚƌŝďƵƟŽŶ
Dampening
& Daamp
m ening
Brass Fittings
71
Belts, Sheaves, Bushings
Designed
• for use with QD bushing
and corresponding belts. 3B110 Industrial Hose Program
Suction & Discharge
Discharge Only
Fire Hose
Sheaves Grooves O.D. Range Composite Hose
A/B 1-6, 8, 10 3.75” – 38.35” Ducting Hose
C 1-10, 12 5.4” – 58.6” Number of Datum Metal Hose & Exp Joints
Brake, Automotive Hose
D 3-10, 12 12.6” – 58.6” Grooves Belt Type Diameter 11.0”
Ind Hose Connections,
Protection
Valves
Instrumentation
QD Bushings Gauges
Brass Fittings
Installation and
JA SH
Removal of
QD Bushings
½” to 115⁄16” w Keyseat ½” to 2½” w Keyseat ½” to 2¾” w Keyseat
2” no Keyseat 29⁄16”, 25⁄8” no Keyseat 27⁄8”, 215⁄16” no Keyseat Special Applications and
Made-To-Order Products
SDS • Air Compressor
or SK SF
SD • Agricultural
7⁄8” to 37⁄16” w Keyseat 1” to 315⁄16” w Keyseat 17⁄16” to 4½” w Keyseat 115⁄16” to 7” w Keyseat
• Oilfield Machinery
3½” no Keyseat 4” no Keyseat
• Construction
• Air Handling
E F J M, N, P • We can provide kits of
V-Belt drive components
73
Valves
VBA 2F B 600 - 16
Why Midwest Hose? Ball Valves
Layflat Hose Program Ball Style Body Material PSI Size
1F 1 Piece Full Port B Brass 125 04 1/4”
Rotary Hose Program 1R 1 Piece Reduced Port N Nickel Plated Ductile Iron 150 06 3/8”
Info, Fittings 2F 2 Piece Full Port Z Bronze 200 08 1/2”
Choke & Kill, BOP 2R 2 Piece Reduced Port 4 304SS 300 12 3/4”
Rotary 4F 4 Bolt Full Port C Carbon 600 16 1“
4R 4 Bolt Reduced Port 6 316SS 750 20 11/4”
Hydraulic Hose Program 6F 6 Bolt Full Port P PVC 1K 24 11/2”
Rubber 6R 6 Bolt Reduced Port M Monel 15C 32 2”
Thermoplastic SR Spring Return H Hastaloy 2K 48 3“
Teflon MI Mini D Ductile Iron 3K 64 4”
Crimp Fittings DY Dual Y 5K
Crimp Machines
DV Dual Y Vented 6K
Industrial Hose Program 3D 3 Way Diverting 10K
Suction & Discharge 3L 3 Way L Pattern
Discharge Only ST Steam
Fire Hose HB Hex Bar Body
Composite Hose
150 WSP (Steam) RPTFE Seat, 316SS Ball RPTFE Seat, 316SS Ball POM Seat, 316SS Ball Peek Seat, 316SS Ball RPTFE Seat, 316SS Ball
Ducting Hose 1/4” to 4” 1/4” to 2
1/4 2” 1/4” to 2”
1/4 2 1/4” to 2”; 2” RP 1/4” to 2”; 2” RP 1/4” to 2”
Metal Hose & Exp Joints Import, Domestic
Brake, Automotive Hose
AWWA Flanges (6 Bolt) AWWA Flanges (6 Bolt) ANSI 150# (8 Bolt) MxF, MxM, FxF AWWA Flanges (8 bolt) AWWA Flanges (8 bolt)
3” to 12” 4”,, 8” 4,5
4”, 5” 4 12
4” to 12” 2” to 12”
VBFWSN-DD1EL
VBFWSN DD1
D1EL VBFWSN-6D1TL VBFWS8-DD1EL
VBFWS8 DD1EL ^ƉůŝƩĞƌ VBFLSN-DD1EL VBFLSN-6D1TL
Wafer Notched, Short Wafer Notched, Short Wafer Notched, Short Union Splitter Valve Lug Style, Short Neck, Lug Style, Short Neck, All Oth
Other
Neck EPDM Seat Neck Teflon Seat Neck EPDM Seat with Fig 206 or 100 EPDM Seat Teflon Seat Butterfly Valves
74
Valves
6K & 10K in CS & 5S316 6K & 10K in CS & SS316 6K & 10K in CS & SS316 6K & 10K in CS & SS316 6K CS & SS316 6K CS & SS316
1/4”, 1/2”, 3/4”, 1” 1/2
1/2”,, 3/4
3/4”,, 1”
1 1/2” 3/4”, 1” 1/4 , 1/2
1/4”, 1/2” 1/4”” 1/4”
VNP
V NP VNPභභභB VNM VNA VNWභභභR VNWභභභT
Needle Plug Type Plug Type with Multi Port Angle Style Round Handle Tee Bar Handle
Bleed Screw Gauge Valve
75
Instrumentation
Tylok’s CBC-LOK® Double Ferrule Tube Fittings
Why Midwest Hose? ferru swaging action • Heat code traceable
• Double ferrule
Layflat Hose Program • 316 Stainless
Stainles Steel • ASTM F1387-99 (2005)
• Total component
compo material standards
Rotary Hose Program interchangeability
interchange • Made in the U.S.A.
Info, Fittings
Choke & Kill, BOP
Rotary IInstrumentation
t t ti Installation Instructions
Nomenclature
Hydraulic Hose Program
Rubber
Thermoplastic
B
Unions
Teflon
T
Crimp Fittings
Crimp Machines
Instrumentation
DTTT DTTM DTMT DTTF DTFT
Gauges Union Tee Male Branch Tee Male Run Tee Female Branch Tee Female Run Tee
Quick Couplings
Stub Tube Caps and
Steel Adapters
Connectors Plugs
Brass Fittings
Miscellaneous
Can be tightened at Ensures nut properly Anti-gall for stainless Detects gas leaks
any location on tube tightened steel, steel, and nickel
Thermocouple Bore Gap Gage Tylube Tyspy Steel Instrumentation Brass Instrumentation
Through Fittings Fittings
76
Gauges
Dial Size 1.5”, 2”, 2.5” 1.5”, 2”, 2.5” 4” 4” 1.5”, 2”, 2.5”, 4”, 6” Hydraulic Hose Program
Dial Range Vac - 6,000 PSI Vac - 10,000 PSI Vac - 10,000 PSI Vac - 10,000 PSI Vac - 30,000 PSI Rubber
Thermoplastic
Fill Type Dry Glycerine Glycerine Glycerine Dry or Glycerine Teflon
Thread Size 1/8“, 1/4” 1/8“, 1/4”, 7/16” 1/4”, 1/2” 1/4” Crimp Fittings
Case Type Steel Stainless Stainless Stainless Stainless Crimp Machines
Accuracy 1.6% FSD 1.6% FSD 1.6% FSD 2% FSD 1.6% FSD Industrial Hose Program
Mount Options Suction & Discharge
Center Back Center Back Bottom Center Back Center Back
Discharge Only
Bottom Bottom Lower Back Bottom Bottom Fire Hose
Panel Panel Panel Panel Lower Back Composite Hose
Flange Flange Flange Panel/Flange Ducting Hose
Metal Hose & Exp Joints
Economy gauge Glycerine filled to Same A more All stainless Brake, Automotive Hose
pnuematic systems resist vibration and construction as the economical version construction, case,
Ind Hose Connections,
with minimal pressure surges. CF only with a of the CFC internals, and Protection
vibration. Ideal for most all larger 4” dial connection
Hammer Unions
applications.
Flow Iron,
Frac Tank Supplies
Bi-Metal Thermometers Thermowells Pipe Fittings, Flanges
Guages Temperature. Available in back Used to protect the thermometer
ermometerr
mount, bottom mount, or adjustable from the process media.
a. Prod, Drill &
mount. Well Serv Products
Instrumentation
Tubing
Industrial Grade is welded together and WP range is up to 5,000 Gauges
psi. It’s rolled, welded and then drawn on a mandrel which makes Quick Couplings
the OD consistent and p provides a smooth tube by cleaning the
weld. Steel Adapters
Instrumentation Grade is sseamless and WP range is up to 10,00
10,000 Custom
stom Made Assemblies
psi. Made from an extrusion process. • Pricing by the foot and number of bends Brass Fittings
• Fabricated and shipped from Oklahoma City or Dallas
• Samples are always our best guides, but drawings
with detailed instructions are gladly accepted
• Tube kits are popular as well
Bulk
Stainless Steel Bu
B Quantities
lk Qu
Carbon
WP Wall 20’ Coil Wall WP Steel SS304
Material OD psi Thickness Sticks Lengths Size Thickness psi Welded Welded
Copper Tubing
SS304 0.25” 5100 800’ 1/8” .028” Bulk quantities
Seamless 0.375” 3300 400’ 3/16” .035” or custom made
0.5” 2600 0.35” wall 200’ 150 or 1/4” .035” assemblies up to
SS316 0.25” 5100 800’ 5/16” .035” 50 foot coils
annealed 300 foot
Seamless 0.375” 3300
conforms to
400’
coils
3/8” .035”
0.5” 2600 200’ 1/2” .049” 5,000
ASTM A269
SS304 0.25” 5100 800’ 5/8” .065”
0.375” 3300 400’ 3/4” .065”
Welded
0.5” 2600 200’ 7/8” .065”
SPEC SHEET ORDER 1” .095”
1¼” 1.20”
Free of scratches, ready for bending/flaring 1½” 1.20”
77
Quick Couplings
78
Quick Couplings
Seals on most quick couplings can be changed
Suggested
Seal Material Media
Seal Why Midwest Hose?
Acetic Anhydride EPDM
NBR Nitrile Rubber -40º to 250º F Acetone EPDM
Layflat Hose Program
Acetylene NBR
Standard seal with excellent oil and wear resistance profile. Air (to 200°F) NBR
High nitrile rubber is particularly oil resistant. Low nitrile one Air (above 200˚F) FKM Rotary Hose Program
has excellent low temperature resistance but less oil resistance. Alcohol, Ethyl EPDM Info, Fittings
Alcohol, Methyl NBR
FKM Fluoro Rubber -20º to 400º F Alkalies, General NBR Choke & Kill, BOP
Shadow Chart Quick Coupling Ammonia, Aqueous EPDM Rotary
Phone Utility Cross Reference Utility Excellent heat resistance, as well as oil and chemical resistance Ammonia, Gas EPDM
is good for wide range of applications. Ammonia, Anhydrous EPDM Hydraulic Hose Program
Ammonia, Hydroxide EPDM
Rubber
CR Neoprene -45º to 300º F Aroclor
Benzene (Benzol)
FKM
FKM Thermoplastic
Excellent resistance to weather variations, also little affected by Bleach Solutions EPDM Teflon
ultraviolet and/or ozone. Brake Fluid, Non-Petro EPDM Crimp Fittings
Bromine Gas FKM
Testing Available Crimp Machines
Butane NBR
• Flow rate EPDM Ethylene-Propylene Rubber -65º to 300º F Butyl Alcohol NBR
• Impulse Quick Coupling Care Excellent resistance to weather variations and affected little by Carbon Dioxide, Dry NBR Industrial Hose Program
• Material hardness and Installation Guide, Carbon Dioxide, Wet NBR Suction & Discharge
• Salt spray Glossary
ultraviolet and/or ozone.
Carbon Monoxide NBR
Discharge Only
Carbon Tetrachloride FKM
Cellulube EPDM Fire Hose
Creosote FKM Composite Hose
Crude Oil FKM Ducting Hose
Cutting Oil NBR
Snap-Tite ‘H’ Extreme Pressure Straight-Through VEP BOP Wing 5000 BOP Diesel Fuel NBR
Metal Hose & Exp Joints
Diester Lubricants FKM Brake, Automotive Hose
Ethane NBR
Ethanol NBR Ind Hose Connections,
Ethyl Chloride NBR Protection
Ethylene Glycol EPDM
Freon, General CR
Ferric Hydroxide NBR Hammer Unions
Trivalent Chrome Trivalent Chrome Trivalent Chrome Zinc Nickel CRIII Zinc Plated Formaldehyde (50%) EPDM
4,000
Fuel Oils, General NBR Flow Iron,
Gasoline NBR
Glycerine (Glycerol) NBR
Frac Tank Supplies
6,500 5.5 10,000 3.8 5,500 6 8,700 6.36
Glycols EPDM
4,500 9.5 10,000 6 4,500 14 7,975 12.19 Helium NBR Pipe Fittings, Flanges
Heptane NBR
4,000 13 3,500 24 7,975 23.85 Hexane NBR
Prod, Drill &
3,500 30 3,100 7,975 39.2 5,000 35 Hydraulic Oil, Aircraft NBR
Hydraulic Oil, Petrolium NBR Well Serv Products
2,000 48 2,500 7,250 53 5,000 65 Hydraulic Oil, Phosphate EPDM
1,750 82 2,500 6,815 100.1 5,000 105 Hydrogen Gas NBR Hyd ACMPV, Filter Carts
Hydrolube NBR
1,500 120 2,500 5,800 198.7 5,000 160 Isobutyl Alcohol EPDM
Isopropyl Alcohol FKM Belts, Sheaves, Bushings
1,500 185 2,500 5,075 265 5,000 270 Jet Fuel (above 160º) FKM
-40º to 250º F -40º to 250º F -40º to 250º F -40º to 250º F -20º to 400º F Kerosene NBR Valves
Lindol EPDM
Nitrile Nitrile Nitrile Nitrile-Energized FKM LP Gas NBR
Magnesium Hydroxide FKM Instrumentation
Methane NBR
Methanol NBR
Methyl Bromide
Gauges
FKM
Methyl Ethyl Ketone (MEK) EPDM
MIL-F-81912 (JP-9) EPDM Quick Couplings
MIL-H-5806 NBR
MIL-H-6083 NBR
MIL-H-7083 NBR
Steel Adapters
Mineral Oils NBR
Mineral Spirits NBR Brass Fittings
Nickel Acetate EPDM
Nickel Suphate EPDM
Nitrogen Gas NBR
Nitrous Oxide NBR
Octane FKM
Oleum Spirits NBR
OS45 and OS45-1 FKM
Oxygen, Non-Breathing FKM
Paint Thinner FKM
Paraffin NBR
Peanut Oil NBR
Pentane NBR
Perchloroethylene FKM
Phosphoric Acid (100%) EPDM
Photographic Solutions EPDM
Potassium Acetate EPDM
Propane NBR
Propylene FKM
Propylene Glycol NBR
Silicone Oil NBR
Stoddard Solvent NBR
Sulphuric Acid FKM
Toluene FKM
Transmission Fluid (A) NBR
Trichloroehtylene FKM
Turpentine NBR
Vegetable Oil NBR
Water NBR
Water, Distilled NBR
Water, Dionized NBR
Water, Sea EPDM
79
Quick Couplings
80
Quick Couplings
Valves
Instrumentation
Wing 5000 Series Gauges
• High flow capacity with low pressure drop
• Primarily for rugged hydraulic applications such as Quick Couplings
offshore drilling, power tools, and cranes Flow
• Minimal leakage on disconnection Operating Female Coupler Female Nipple
Rate Steel Adapters
Size Pressure (GPM) Std. Sizes Jump Sizes Std. Sizes Jump Sizes
Alternatives
• SS version 3/4” 35 6WSF6 6WSF4 WS6F6 WS6F4 Brass Fittings
1” 65 8WSF8 WS8F8
• O-Ring Boss style
1-1/4” 5,000 105 10WSF10 WS10F10
• View Port option provides
1-1/2” 160 12WSF12 WS12F12
visual confirmation of correct
2” 270 16WSF16 WS16F16
installation
ORDER ORDER
Wing 5000 Caps,
Plugs, Repair Kits
Plugs
81
Quick Couplings
Valves
Extreme Pressure
Instrumentation Caps, Plugs, Repair Kit
Caps Plugs Kits
Gauges
Quick Couplings
Straight-Through Series
• Smooth, straight-
Steel Adapters through bore (no
valves) to allow
Brass Fittings maximum flow Brass Flow
• Primarily used in Operating Rate Female Coupler Female Nipple Male Coupler Male Nipple
hot water supply Size Pressure (GPM) Std. Sizes Jump Sizes Std. Sizes Jump Sizes Std. Sizes Jump Sizes Std. Sizes Jump Sizes
lines for pressure 1/4” 5,500 6 2EF2-B E2F2 2EM2-B E2M2
washers and steam 3/8” 4,500 14 3EF3-B E3F3 3EM3-B E3M3
washers 1/2” 3,500 24 4EF4-B E4F4 4EM4-B E4M4
3/4” 3,100 58 6EF6-B E6F6 6EM6-B E6M6
• DO NOT disconnect
1” 2,500 100 8EF8-B E8F8 8EM8-B E8M8
under pressure (no 1-1/4” 2,500 150 10EF10-B E10F10 10EM10-B E10M10
valves) 1-1/2” 2,500 250 12EF12-B E12F12 12EM12-B E12M12
2” 2,500 350 16EF16-B E16F16 16EM16-B E16M16
ORDER ORDER ORDER ORDER
Alternatives
• Brass nipples
• 303 SS version
• Coupler x Push-lock
Straight-Thru
Repair Kits
82
Quick Couplings
Flow Iron,
• API 16D Fire Test approved - maintains pressure Pipe Fittings, Flanges
when exposed to 1300° F for 5 minutes Flow
Operating Rate Female Coupler Female Nipple
F male N
Fe i ple
ip Prod, Drill &
• Internal valve allows connection and disconnection
Size Pressure (GPM) Std. Sizes Sizes
Jump S Std.
d. Sizes Sizes
Jump Si Well Serv Products
under pressure
• Red wing-nuts and o-ring identifies for BOP service 3/4” 35 6WSF6-BOP 6WSF4-BOP WS6F6-BOP WS6F4-BOP
Hyd ACMPV, Filter Carts
• Minimal leakage on disconnection 1” 65 8WSF8-BOP WS8F8-BOP
1-1/4” 5,000 105 10WSF10-BOP WS10F10-BOP Belts, Sheaves, Bushings
1-1/2” 160 12WSF12-BOP WS12F12-BOP
2” 270 16WSF16-BOP WS16F16-BOP Valves
ORDER ORDER
Instrumentation
Gauges
83
Quick Couplings
Valves Operating Flow Rate Female Coupler Female Nipple Male Coupler Male Nipple
Size Pressure (CFM) Std. Sizes Jump Sizes Std. Sizes Jump Sizes Std. Sizes Jump Sizes Std. Sizes Jump Sizes
Instrumentation
1/4” Steel 26 J2F2 J2F1, J2F3 J2M2 J2M1, J2M3
Gauges 3/8” Steel 500 58 3JF3 3JF2, 3JF4 J3F3 J3F2, J3F4 3JM3 3JM2, 3JM4 J3M3 J3M2, J3M4
1/2” Steel 91 4FF4 4FF3, 4FF6 J4F4 J4F3, J4F6 4FM4 4FM3, 4FM6 J4M4 J4M3, J4M6
Quick Couplings 1/4” Brass 500 26 J2F2-B 2JF1-B, 2JF3-B J2F2-B 2JM2-B 2JM1-B, 2JM3-B J2M2-B
ARO 210 Series ARO nipples are identified easily by the shapes of their noses
Operating Flow Rate Female Coupler Female Nipple Male Coupler Male Nipple
Size Pressure (CFM) Std. Sizes Jump Sizes Std. Sizes Jump Sizes Std. Sizes Jump Sizes Std. Sizes Jump Sizes
1/4” Steel 25 2MF2-PL 2MF3-PL M2F2 M2F3 2MM2-PL 2MM3-PL M2M2 M2M1, M2M3
300
3/8” Steel 42 3MF3-PL M3F3 3MM3-PL M3M3
1/4” Brass 300 22 2MF2-B 2MF3-B M2F2-B M2F3-B 2MM2-B 2MM3-B M2M2-B
ORDER ORDER ORDER ORDER
Alternatives
• BSPP style connection • Automatic Coupler x Push-Lock
• 303 SS version • Manual Coupler x Push-Lock
• Automatic Female Coupler • Nipple x Push-Lock
• Automatic Male Coupler • Automatic Coupler x Hose Barb
• Manual Coupler x Hose Barb
• Nipple x Hose Barb
84
Quick Couplings
Lincoln Series Lincoln Nipples are identified easily by the shapes of their noses Why Midwest Hose?
Hammer Unions
Tru-Flate Flow Iron,
Frac Tank Supplies
Instrumentation
3/8” 1/4”
Gauges
Quick Couplings
Steel Adapters
Lincoln
Brass Fittings
1/4”
B
Bowes Th
Thor
Bowes Interchange Thor Interchange
Air Quick Couplings Glycerin Filled Check Valve Whip Check Lever Blow Gun Nylon Recoil
Cross Reference Pressure Gauges Air Hose
85
Steel Adapters
Valves 1 2 1
FL 1 FL22 1FL30 1
FL45 1
FL60
Instrumentation Code 61 Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring
2406- 2408-
O-Ring Flange
2500-
Flange 22°
2501-
Flange 30°
2501-L-
Flange 45°
2501-LL-
Flange 60°
Gauges Female JIC × Male Male JIC Plug Male JIC × Male Male JIC × Male Male JIC × Male Pipe Male JIC × Male Pipe
JIC Straight Reducer 2W 4W 6W 4W JIC 90° 4W Pipe 90° 4W 6W 90° Long 4W 90° Extra Long
Quick Couplings 2
3
Steel Adapters 2
2 2
2
Brass Fittings 1 1 1 1 2
1 FL67 1 FL90 FL90L FL100 FL110 FL135
Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring
2501-LLL
Flange 67°
2502-
Flange 90°
2503-
Flange 90° Long
2504-
Flange 100°
2505-
Flange 110°
2601-
Flange 135°
Male JIC × Male Pipe Male JIC × Female Male JIC × Male Male JIC × Male Male JIC × Female Male JIC × Male JIC
4W
90° Extra Extra Long 2W 4W 6WPipe 90° 4W Pipe 45° 4W JIC 45° 4W Pipe 45° 4W × Male Pipe Branch Tee
3
3
3 3
3 3 1 2
1 2
1 FLH 2 1 FLH30 2 1 FLH45 2 FLH60 1FLH67 2 FLH90 4
Code 62 O-Ring Code 62 O-Ring Code 62 O-Ring Code 62 O-Ring Code 62 O-Ring Code 62 O-Ring
2602-
Flange Heavy
2603-
Flange Heavy 30°
2605-
Flange Heavy 45°
2606-
Flange Heavy 60°
2611-
Flange Heavy 67°
2650-
Flange Heavy 90°
Male JIC × Male JIC Male JIC Union Tee Male JIC × Male Pipe Male JIC × Female Male JIC × Male Pipe Male JIC Cross
4W 6W
× Female Pipe Branch Tee 6W 4W× 6W
Male JIC Run Tee 6W
Pipe × Male JIC Run Tee 6W
× Female Pipe Tee 4W 6W
2 3
Flareless 2 Metric
3
Assembly
1
1 1 2
2 1
1 1 2
MFA MFA45 MFA90 M••DL
Male Flareless Female Flareless Female Flareless Metric DIN Light
2700- 2701-
Assembly (Ermeto)
2702-
Assembly 45°
2703-
Assembly 90°
2704- 2705-
Male JIC × Male JIC Male JIC × Male JIC Male JIC × Male JIC Male JIC Bulkhead Male JIC Bulkhead Female Pipe × Male
Bulkhead 2W R5 90°
Bulkhead R7 W Bulkhead 45° W Branch Tee Run Tee JIC Bulkhead
86
Steel Adapters
6701- 6701-L- 6801- -NWO 6801-L- -NWO 6801-LL- -NWO 6801-LLL- -NWO Prod, Drill &
Male JIC × Female Male JIC × Female Male JIC × Male Boss Male JIC × Male Boss Male JIC × Male Boss Male JIC × Male Boss Well Serv Products
JIC Swivel Bent Tube 90° JIC Swivel Bent Tube 90° Long O-Ring 90° O-Ring 90° Long O-Ring 90° Extra Long O-Ring 90° Extra Extra Long
Hyd ACMPV, Filter Carts
3 3
2
2 Pipe Belts, Sheaves, Bushings
2
1 2 1 2 Valves
1 1 1
Quick Couplings
1
Steel Adapters
1 2 1 2 2 1 2 1 2 1 2
Brass Fittings
37° JIC
1 1 1 1
Pipe
1 2 1 2
Pipe Swivel
5405- 5406- 5406-C- 5406-HP- 5406-P- 5406-SHP- O-Ring
Male Pipe × Female Male Pipe × Female Pipe Cap Socket Hex Pipe Plug External Hex Pipe Square Hex Pipe Plug
Pipe Straight Expander Pipe Reducer Bushing Plug Split Flange
Face Seal
2
2 2 2 Hose Barb
2 2
1 1 1 1 1 1
Bite Type
Metric
5500- 5501- 5502- 5503- 5504- 5505-
BSPP
Male Pipe × Male Male Pipe × Male Male Pipe × Female Male Pipe × Female Female Pipe × Female Pipe ×
Pipe 90° Pipe 45° Pipe 90° Pipe 45° Female Pipe 90° Female Pipe 45° BSPT
87
Steel Adapters
1 Boss 2
Teflon 1 2 1 2 2 1 1 2
Crimp Fittings 1
Crimp Machines FSX45
4 FSX90 FSX90L MB MBX
Female SAE Swivel 45° Female SAE Swivel 90° Female SAE Swivel 90° Male O-Ring Boss Male O-Ring
Industrial Hose Program 5652- 6401- -O 6404-
Long Neck
6405- -O 6420- 6805- -NWO
Boss Swivel
Suction & Discharge Female Pipe Male O-Ring × Female Boss O-Ring Male Boss O-Ring × Female Boss O-Ring Male Boss O-Ring ×
2W Union R5
CrossR7 2W R5 R7
Male Pipe 2W × MaleR5
Pipe Female Pipe 2W 4W× Female Pipe
R7 2W Female Pipe 90°
Discharge Only
Fire Hose
Composite Hose 2 Flat Face
2 Pipe Swivel 2
Ducting Hose
Metal Hose & Exp Joints 1 2 1 2
1 1 1
Brake, Automotive Hose
MBX90 MFOR FFORX FFORX45 FFORX90S
Ind Hose Connections, Male O-Ring Boss Male Flat Face O-Ring Female Flat Face Female Flat Face Female Flat Face O-Ring
6805-L- -NWO
Swivel 90°
6806- -NWO 1404-
O-Ring Swivel
1405-
O-Ring Swivel 45°
1501-
Swivel 90° Short Neck
Protection Male Boss O-Ring × Male Boss O-Ring × Male Pipe × Female Female Pipe × Male Pipe × Female
2W Female Pipe 90° Long Male Pipe 90° 2W 4W 2W 4W Pipe
6W Swivel
R5 R7 2W Female
4W R5Swivel
Pipe R7 2W 4W 6W R5 90°
Pipe Swivel R7
Hammer Unions
2 1 1
Flow Iron, 2 Inverted2
2
Frac Tank Supplies
Flare 1 2 3 2 3
Pipe Fittings, Flanges 1 1 1
FFORX90M FFORX90L MIX MIX45 MIX90
Prod, Drill & Female Flat Face O-Ring Female Flat Face O-Ring Male Inverted Male1601-
Inverted Male1602-
Inverted
1501-L-
Swivel 90° Medium Neck
1502-
Swivel 90° Long Neck
1503- 1504-
Flare Swivel FlarePipe
Male Swivel 45°
× Female Flare Pipe
Female Swivel 90°
× Female
Well Serv Products Male Pipe × Female Female Pipe × Female Male Pipe × Female Female Pipe × Female Pipe Swivel × Female Pipe Swivel × Female
2W Pipe SwivelR590° R7
Long 2W 4WPipe Swivel 90°R7 Pipe Swivel 45° 2W Pipe SwivelR5 45°
R7 2W R5 R7 2W R5 R7
Pipe Swivel Branch Tee Pipe Swivel Branch Tee
Hyd ACMPV, Filter Carts
2
Belts, Sheaves, Bushings Flange
3 2
2
O-Ring
Valves 1 2
4 3
1 2 1 1
Kits
FL1 FL22 FL30 FL45 FL60
Instrumentation Code 61 Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring
1603- 1604-
O-Ring Flange
6900- -O
Flange 22°
6901- -NWO
Flange 30°
6902- -NWO
Flange 45° Flange 60°
Gauges Female Pipe Male Pipe × Female Male Boss O-Ring × Male Boss O-Ring × Male Boss O-Ring ×
Swivel Union Tee 2W 4W
Pipe6W
Swivel Cross 4W FP Swivel 4W Pipe Swivel 90°
Female 2WFemale
4W 6W
Pipe Swivel 45° 4W
Quick Couplings
O-Ring
Steel Adapters
1 2
Brass Fittings
FL67 FL90 FL90L FL100 FL110 FL135
Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring Code 61 O-Ring
Flange 67° Flange 90° Flange 90° Long Flange 100° Flange 110°
3474- -NWO
Flange 135°
Boss O-Ring Kit Face Seal O-Ring Kit Flange O-Ring Kit Boss, Face Seal, Male Boss O-Ring ×
4W 2W 4W 6W 4W 4W
Flange O-Ring Kit 4W 4W
Male Boss O-Ring
1 1 1 2 1 2
Flareless
2
2
2
Split Metric
Assembly 1 1
Flange 1 2
1
MFA MFA45 MFA90 M••DL
Male Flareless Female Flareless Female Flareless Metric DIN Light
6807- -NWO 6808- -NWO
Assembly (Ermeto)
6815- -NWO
Assembly 45° Assembly 90°
4005- 1700-
Male Boss O-Ring × Male Boss O-Ring × Male Boss O-Ring × Flange O-Ring Male JIC × Code 61
Male Boss O-Ring 90° 2W Male Boss O-Ring
R5 R745° 2W
Female Boss O-Ring 45° 2W 2W Flange
88
Steel Adapters
Valves
Instrumentation
FS0304-C- FS0306- FS0318- FS0319-
Socket Weld Split Face Seal Cap Face Seal Bulkhead Face Seal Nut Face Seal Sleeve Gauges
Flange Pad Assembly Insert Lock Nut
Quick Couplings
2
Steel Adapters
1 2 1 2 1 2 1 2 1
1 Brass Fittings
2 3 3 3
2 3 37° JIC
1 2 Pipe
1 2 1 2
1 1 2
1 4 Pipe Swivel
FS2601- FS2605-
FS2501- FS2503- Male O-Ring Face
FS2603- Male O-Ring Face
FS2650- O-Ring
Male O-Ring Face Male O-Ring Face Seal × Male O-Ring Face Male O-Ring Seal × Male Pipe × Male Male O-Ring Face
Seal × Male Pipe 90° Seal × Male Pipe 45° Seal × Male Pipe Branch Tee Face Seal Union Tee O-Ring Face Seal Run Tee Seal Union Cross Split Flange
3 Face Seal
2
2 3 Hose Barb
1 2
1 2
1 2 Bite Type
1 1 1 2
Metric
FS2700
Male O-Ring Face
FS2701- FS2702- FS2703- FS2704- FS6400- -O BSPP
Seal × Male O-Ring Male O-Ring Face Male O-Ring Face Male O-Ring Face Male O-Ring Face Male O-Ring Face Seal
Face Seal Bulkhead Seal Bulkhead 90° Seal Bulkhead 45° Seal Bulkhead Branch Tee Seal Bulkhead Run Tee × Male Boss O-Ring BSPT
89
Steel Adapters
Prod, Drill & 4404- 4501- 4503- 4601- -NWO 4603- -NWO
Well Serv Products Hose Barb × Hose Barb × Male Hose Barb × Male Hose Barb × Hose Barb ×
Male Pipe Pipe 90° Pipe 45° Male Boss O-Ring 90° Male Boss O-Ring 45°
Hyd ACMPV, Filter Carts
Instrumentation
4604- -O C0304-C- C0318- C0319- C2402-
Gauges Hose Barb × Bite Type Cap Nut Bite Type Nut Bite Type Ferrule Bite Type × Male JIC
Male Boss O-Ring
Quick Couplings 2
Steel Adapters
1 2 1 2 1 2 1 2 1
Brass Fittings 1
2 3
2 3
2 3
1 1 1 1 2 1 2 1 2
3 2 Metric
60° 1 2 1 2
1 2 1
90
Steel Adapters
1
Hydraulic Hose Program
2
Rubber
Thermoplastic
Teflon
1 1 2 1 1
1 Crimp Fittings
2 Crimp Machines
7025- -BS 7045- -BS 7205- -BS 7599-P- 7699-C- 7802- -BS Industrial Hose Program
Female JIC × Male Female Pipe × Male Male JIC × Male Komatsu Plug Komatsu Cap Male JIC × Male Metric 45° Suction & Discharge
Metric w/ Bonded Seal Metric w/Bonded Seal Metric 90° w/ Bonded Seal w/ Bonded Seal Discharge Only
Fire Hose
BSPP Composite Hose
Ducting Hose
1 2
1 2 1 1 Metal Hose & Exp Joints
Brake, Automotive Hose
7002- -BS Ind Hose Connections,
8055- -BS 8555-H- -BS 8555-P- -BS 8800- -BS Male JIC × Male British Protection
Male Metric × Male Metric Metric Hex Socket Metric Hex Head Plug Metric Bonded Seal Standard Pipe Parallel
w/ Bonded Seal Plug w/ Bonded Seal w/ Bonded Seal W/ Bonded Seal
Hammer Unions
Flow Iron,
Frac Tank Supplies
1 2 1 2
1 2 1 2 1 2 1 2
Pipe Fittings, Flanges
7022- -BS 7032- -BS
7003- 7004- 7023- 7033- Prod, Drill &
Female JIC × Male Male Pipe × Male
Male JIC × Female British Male JIC × Female British British Standard Pipe Female JIC × Female British Standard Male Pipe × Female British Well Serv Products
Standard Pipe Parallel Standard Pipe Parallel Swivel Parallel w/ Bonded Seal British Standard Pipe Parallel Pipe Parallel w/ Bonded Seal Standard Pipe Parallel
Hyd ACMPV, Filter Carts
2 2 2
Belts, Sheaves, Bushings
2 1 1 2 1
1 2 1 1 Valves
7102- -BS
7042- -BS 7062- -BS Male JIC × Male 7202- -BS 7204- Instrumentation
7034- Female Pipe × Male Male Boss O-Ring British Standard Pipe Male JIC × Male Male JIC × Female
Male Pipe × Female British British Standard × Male British Standard Parallel 45° British Standard Pipe Parallel British Standard Pipe Gauges
Standard Pipe Parallel Swivel Pipe Parallel w/Bonded Seal Pipe Parallel w/ Bonded Seal w/ Bonded Seal 90° w/ Bonded Seal Parallel Swivel 90°
Quick Couplings
2
1 2
BSPT Steel Adapters
1 1
1
1 2
Brass Fittings
9020- -BS
7222- -BS Male British Standard 9522-P- -BS 9522-H- -BS
Female JIC Swivel × Pipe Parallel × Male British Standard Pipe British Standard Pipe 7000-
Male British Standard Pipe British Standard Pipe Parallel Hex Head Parallel Hex Socket Male JIC × Male British
Parallel 90° w/ Bonded Seal Taper w/ Bonded Seal Plug w/ Bonded Seal Plug w/ Bonded Seal Standard Pipe Taper
2
2
2
1 2 1 2 37° JIC
1 2 1
1 1 Pipe
7040- 8080- Pipe Swivel
7030- Female National 7100- 7200- 7220- Male Japanese
Male Pipe × Male British Pipe Thread × Male Male JIC × Male British Male JIC × Male British Female JIC × Male British Industrial Standard × Male O-Ring
Standard Pipe Taper British Standard Pipe Taper Standard Pipe Taper 45° Standard Pipe Taper 90° Standard Pipe Taper 90° British Standard Pipe Taper
Split Flange
2
2 2
Face Seal
1 2 1 2
1
1 Hose Barb
1
Bite Type
8180- 8280- 9000- 9001- 9002-
Male Japanese Male Japanese Male British Standard Male British Standard Male British Standard Metric
Industrial Standard × Male Industrial Standard × Male Pipe Taper × Male Pipe Taper × Female Pipe Taper × Female
British Standard Pipe Taper 45° British Standard Pipe Taper 90° British Standard Pipe Taper British Standard Pipe Taper British Standard Pipe Taper 90° BSPP
BSPT
91
Steel Adapters
Flow Iron,
Frac Tank Supplies
Quick Couplings
Steel Adapters
Brass Fittings
92
Brass Fittings
Steel Adapters
Brass Fittings
93
Brass Fittings
Industrial Hose Program 68x 681x 69x 691x 70x 701x 71x 711x 72x 721x 74x 741x
Suction & Discharge Male Connector Male Elbow Female Elbow Male Run Tee Male Branch Tee Bulkhead Union
Discharge Only
Fire Hose Polyline Flareless
Composite Hose Hosing/Tubing Used Polyethylene, Nylon
Ducting Hose Typical Application Instrumentation, Hydraulic and
Pnematic Systems, Water and Soap Lines
Metal Hose & Exp Joints Max WP 500 psi
Brake, Automotive Hose Vibration Excellent Resistance
Temperature -40° to 150°F
Ind Hose Connections, 76x 2030x Material CA360 Brass 1260x 1261x
Protection Adapter Tee Tube Support for Plastic Sleeve Brass Nut
This style is similar to compression, most have advanced to
Plastic Tubing push-connect.
Hammer Unions
Flow Iron,
Frac Tank Supplies
Quick Couplings
Steel Adapters
Brass Fittings
94
Brass Fittings
Flow Iron,
Frac Tank Supplies
Pipe Fittings
Hosing/Tubing Used None. Used with pipe.
Typical Application Pneumatic, hydraulic, grease,
water, refridgeration, instrumentation systems
Max WP 1200 psi
Vibration Fair resistance
Temperature -65° to 250°F
6400x Material CA360 Brass 3129x 3150x 3151x
Male Elbow Cap Slotted Plug Square Head Plug
95
Brass Fittings
Hose Barbs
Hosing/Tubing Used Use with crimp ferrule or clamp.
Typical Application Low pressure air hose, water hose
Temperature -65° to 250°F
96
Brass Fittings
Flow Iron,
Frac Tank Supplies
Instrumentation
PHB••-••MP90 HB••GK HB••-••FGX HB••-••MG
Barb × Male Garden Hose Barb × Female Barb × Male Hose Gauges
Pipe Elbow Barb Set Hose (Swivel)
Quick Couplings
Steel Adapters
Brass Fittings
97
General Information
Franks-Dodd,
OSHA,
Tensile Strength Conflict Minerals,
Government Hose Graph and Hunting Season and MSDS
Specifications Guide Freight Tracking Metals Data Joke of the Day Dates Compliance General Calculations
Dickinson
Towanda
Casper
Rock Springs
Pittsburgh
Vernal
Roosevelt Greeley
Grand Junction
Bakersfield
Woodward
El Reno Oklahoma
City
Hobbs
Dallas 1 Day
Odessa Ft. Worth Longview
2 Day
With more than 25 Lafayette
3 Day
locations across the San Antonio
Houston
Williston
Dickinson
Towanda
Casper
Rock Springs
Pittsburgh
Vernall
Roosevelt Greeley
Grand Junction
Bakersfield
Woodward
El Reno Oklahoma
City
Hobbs
Dallas
Odessa Ft. Worth Longview 1 Day
Lafayette
2 Day
Houston
San Antonio 3 Day
Dilley 4 Day
Alice 5 Day
98
Locations
Casper, WY Dilley, TX
Locations Info 3177 Energy Lane 16120 IH 35S
Scan for Directions, Freight Maps, Published Rates, and Casper, WY 82604 Dilley, TX 78017
Shipment Cut Off Times. Toll Free (866) 472-3670 Toll Free (800) 223-1032
Local (307) 472-3670 Local (830) 963-2063
No automatic answering service - we answer the phones
Fax (307) 472-3671 Fax (830) 963-3848
ready to provide the services you need. Account customers caspersales@midwesthose.com dilleysales@midwesthose.com
can rely on 24/7 phone and call out service.
Rock Springs, WY Fort Worth, TX (Industrial)
Northeast 1895 Foothill Boulevard 3301 Fisher Avenue
Pittsburgh, PA Rock Springs, WY 82901 Fort Worth, TX 76111
130 Southpointe Drive Toll Free (844) 777-8834 Toll Free (888) 885-9130
Bridgeville, PA 15017 Local (307) 362-6773 Local (817) 870-9130
Toll Free (877) 480-6155 Fax (307) 362-7717 Fax (817) 870-9150
Local (412) 257-6155 rockspringssales@midwesthose.com ftwortheastsales@midwesthose.com
Fax (412) 257-6156
pittsburghsales@midwesthose.com Southwest Forth Worth, TX (Oilfield)
Lafayette, LA
Towanda, PA 6675 Corporation Parkway
920 Young Street
RR6 Box 6019-7 Fort Worth, TX 76126
Broussard, LA 70518
Towanda, PA 18848 Toll Free (866) 637-7043
Toll Free (855) 330-4035
Toll Free (877) 917-7979 Local (817) 244-3575
Local (337) 330-4035
Local (570) 265-7979 Fax (817) 244-3739
Fax (337) 330-4036
Fax (570) 265-7980 ftworthwestsales@midwesthose.com
lafayettesales@midwesthose.com
towandasales@midwesthose.com
Houston, TX
Rockies Hobbs, NM
10640 Tanner Road
Bakersfield, CA 200 North Grimes
Houston, TX 77041
3202 Pegasus Road Hobbs, NM 88240
Toll Free (877) 758-3939
Bakersfield, CA 93308 Toll Free (855) 397-0031
Local (713) 983-9092
Toll Free (855) 392-0491 Local (575) 397-0031
Fax (712) 983-0262
Local (661) 392-0491 Fax (575) 397-1237
houstonsales@midwesthose.com
Fax (661) 392-0492 hobbssales@midwesthose.com
bakersfieldsales@midwesthose.com Longview, TX
El Reno, OK
119 Old Post Oak Road
Grand Junction, CO 3500 US Highway 81
Kilgore, TX 75662
757 Valley Court El Reno, OK 73036
Toll Free (877) 238-9616
Grand Junction, CO 81505 Toll Free (855) 839-2499
Local (903) 238-9616
Toll Free (877) 485-9900 Local (405) 262-2499
Fax (903) 984-9651
Local (970) 256-9900 Fax (405) 262-2610
longviewsales@midwesthose.com
Fax (970) 256-9929 elrenosales@midwesthose.com
grandjunctionsales@midwesthose.com
Odessa, TX
Oklahoma City, OK - Corporate Headquaters
1211 South County Road West
Greeley, CO 3312 South I-35 Service Road
Odessa, TX 79763
600 31st, Unit 1 Oklahoma City, OK 73129
Toll Free (866) 282-2488
Evans, CO 80620 Toll Free (800) 375-2358
Local (432) 333-2488
Toll Free (855) 330-1357 Local (405) 670-6718
Fax (432) 333-2492
Local (970) 330-1357 Fax (405) 670-6816
odessasales@midwesthose.com
Fax (970) 506-3524 okcsales@midwesthose.com
greeleysales@midwesthose.com
San Antonio, TX
Woodward, OK
19940 South IH-37
Dickinson, ND 3900 1st Street
Elmendorf, TX 78112
2679 3rd Avenue West Woodward, OK 73801
Toll Free (855) 932-9304
Dickinson, ND 58601 Toll Free (855) 254-3547
Local (210) 932-9304
Toll Free (888) 771-7861 Local (580) 254-3547
Fax (210) 932-9302
Local (701) 225-7861 Fax (580) 254-2645
sanantoniosales@midwesthose.com
Fax (701) 225-6196 woodwardsales@midwesthose.com
dickinsonsales@midwesthose.com
Texas
Williston, ND Alice, TX
3410 2nd Avenue West 3754 East Highway 44
Williston, ND 58802 Alice, TX 78332
Toll Free (888) 708-5330 Toll Free (888) 661-1815
Local (701) 774-5330 Local (361) 661-1815
Fax (701) 774-5336 Fax (361) 661-1858 Locations
willistonsales@midwesthose.com alicesales@midwesthose.com Map
Vernal, UT Dallas, TX
1005 East 500 South 1132 Valwood Parkway, Suite 100
Vernal, UT 84078 Carrollton, TX 75006
Toll Free (866) 781-4760 Toll Free (888) 576-1344
Local (435) 781-4760 Local (214) 638-3210
Fax (435) 781-4763 Fax (214) 638-6527 Find Nearest Updated
vernalsales@midwesthose.com dallassales@midwesthose.com Location Locations List
99
Got Hose? We do!
High Pressure Hoses, Quick Deliveries
Locations Nationwide