Professional Documents
Culture Documents
SERVICE Manual
1. Precautions
2. Product specifications
4. Troubleshooting
5. Wiring Diagram
1. Precautions
1-1. Safety Precautions
Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as
electrical shock.
1-1-1. Warnings
(READING SHOULD)
NOT BE ABOVE 0.5mA LEAKAGE
DEVICE
CURRENT
UNDER
TESTER
TEST
TEST ALL
EXPOSED METAL
SURFACES
2-WIRE CORD
4. With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch first in
the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit, etc.) and all
exposed metal parts, including: metal cabinets, screwheads and control shafts.
The current measured should not exceed 0.5 milliamp.
Reverse the power-plug prongs in the AC outlet and repeat the test.
1-1
1. Precautions
Before servicing units covered by this service manual, read and follow the Safety Precautions section of
this manual.
CAUTION
If unforeseen circumstances create conflict between the following servicing precautions and any of the
safety precautions, always follow the safety precautions.
NOTE
1-2
1. Precautions
Be sure no power is applied to the chassis or circuit and observe all other safety precautions.
CAUTION
8. Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together,
or lifting your foot from a carpeted floor can generate enough static electricity to damage an ESD.
1-3
1. Precautions
1-4
2. Product specifications
2. Product specifications
2-1. Model Comparison
Front View
Detail View
2-1
2. Product specifications
Feature
Specifications
Item Description
2-2
2. Product specifications
Feature
Specifications
Item Description
2-3
2. Product specifications
Feature
Specifications
Item Description
2-4
2. Product specifications
2-2-2. TC350
Model Name T19C350
Feature
Specifications
Item Description
2-5
2. Product specifications
Feature
Specifications
Item Description
2-6
2. Product specifications
Feature
Specifications
Item Description
2-7
2. Product specifications
Feature
Specifications
Item Description
2-8
2. Product specifications
Feature
Specifications
Item Description
2-9
2. Product specifications
Feature
Specifications
Item Description
2-10
2. Product specifications
2-2-3. TC370
Model Name T23C370
Feature
Specifications
Item Description
2-11
2. Product specifications
Feature
Specifications
Item Description
2-12
2. Product specifications
Feature
Specifications
Item Description
2-13
2. Product specifications
2-2-4. TC550
Model Name T24C550
Feature
Specifications
Item Description
2-14
2. Product specifications
2-2-5. TC730
Model Name T27C730
Feature
Specifications
Item Description
2-15
2. Product specifications
Design
2-16
2. Product specifications
2-3-2. TC350
Model TC350(LT24C350NP/ZA) TB350(LT24B350EW/EN)
Design
2-17
2. Product specifications
2-3-3. TC370
Model TC370(LT24C370EW/EN) TB350(LT24B350EW/EN)
Design
2-18
2. Product specifications
2-3-4. TC550
Model TC550(LT24C550LB/ZB) TB350(LT24B350EW/EN)
Design
2-19
2. Product specifications
2-3-5. TC730
Model TC730(LT27C730LB/ZM) TB350(LT24B350EW/EN)
Design
2-20
2. Product specifications
2 Model TC301
SI_ADI/FOX_T2CS2/SITCS2/FOX_T2CSI2176/ECHO_ISDB/SI_ISDB/FOX_T2C_SA/
3 Tuner
AVL6361/
4 Ch Table NONE
5 Front Color NONE
2-21
2. Product specifications
2-4-2. TC350
If you replace the main board with new one, please change the factory option as well.
The options you must change are “Type”.
23:SDC 24:AUO
Vendor BOE CMI
23.6:CMI 27:CMI
23: BN07-01232A 24: BN07-01057A
Panel CODE BN07-01053A BN07-01076A
23.6: BN07-01083A 27: BN07-01079A
23: LTM230HT11 24: M240HYN01.0
SPEC HT185wx1-300 M215HGE-L21
23.6: M236HGE-L20 27: M270HGE-L20
Vendor Hansol SEMCO SEMCO SEMCO
23: BN44-00593A 24: BN44-00594A
CODE BN44-00592A BN44-00593A
Adapter 23.6: BN44-00594A 27: BN44-00594A
23: 45W 24: 45W
SPEC 35W 45W
23.6: 45W 27: 58W
Byte Item
0 Factory Reset TC350 TC350 TC350 TC350
23: 23A6TF0E 24: 24L6TF0E
1 Type 19B6TH0E 22D6TF0E
23.6: 24D6TF0E 27: 27D6TF0E
CIS/N.AMERICA/COLUMBIA/KOREA/EU/TURKEY/SM.AMERICA/
2 Local Set
MEA/EYGYPT/AUS/ISRAEL/SE.SW ASIA/CHINA/HK
2 Model TC350
3 Tuner ANSC/NTSC/DTMB/PAL/DVB-T2C/DVB-TC/ISDB-T/W/Otuner
4 Front Color Chacole Gray
5 Local Set NONE
2-22
2. Product specifications
2-4-3. TC370
If you replace the main board with new one, please change the factory option as well.
The options you must change are “Type”.
2 Model TC370
SI_ADI/FOX_T2CS2/SITCS2/FOX_T2CSI2176/ECHO_ISDB/SI_ISDB/FOX_T2C_SA/
3 Tuner
AVL6361/
4 Ch Table NONE
5 Front Color NONE
2-23
2. Product specifications
2-4-4. TC550
If you replace the main board with new one, please change the factory option as well.
The options you must change are “Type”.
Vendor CMI
Panel CODE BN07-01083A
SPEC M236HGE-L20
Vendor SEMCO
Adapter CODE BN44-00593A
SPEC 45W
Byte Item
0 Factory Reset TC550
1 Type 24D6TF0E
AD_AU_NZ/AD_SIN/AD_AU_NZ2/AD_SIN2/EA_VIET/EA_THAI/EA_INA/EA_CHINA/EA_
INDIA/EA_SRI/EA_NEPAL/EA_BANGLA/EA_IRAN/EA_ISRAEL/EA_EGYPT/EA_LIBYA/
2 Local Set EA_CIS/EA_M_ASIA/EA_SAUDI/EA_PAK/EA_E_ASIA/EA_AFR/EA_S_AFR/EA_MAL/
EA_PHI/ED_IRAN/ED_VIET/ED_INA/ED_ISRAEL/ED_INDIA/BRA_DTV/CHILE_DTV/
RERU_DTV/ARG_DTV/URU_DTV/PAR_DTV/SA_ATV/SELA/COLOMBIA/TAIWAN
2 Model TC550
SI_ADI/FOX_T2CS2/SITCS2/FOX_T2CSI2176/ECHO_ISDB/SI_ISDB/FOX_T2C_SA/
3 Tuner
AVL6361/
4 Ch Table NONE
5 Front Color NONE
2-24
2. Product specifications
2-4-5. TC730
If you replace the main board with new one, please change the factory option as well.
The options you must change are “Type”.
Vendor VUO
Panel CODE BN07-01241A
SPEC M270HVN02.0
Vendor SEMCO
Adapter CODE BN44-00594A
SPEC 58W
Byte Item
0 Factory Reset TC730
1 Type 27L6AF0E
AD_AU_NZ/AD_SIN/AD_AU_NZ2/AD_SIN2/EA_VIET/EA_THAI/EA_INA/EA_CHINA/EA_
INDIA/EA_SRI/EA_NEPAL/EA_BANGLA/EA_IRAN/EA_ISRAEL/EA_EGYPT/EA_LIBYA/
2 Local Set EA_CIS/EA_M_ASIA/EA_SAUDI/EA_PAK/EA_E_ASIA/EA_AFR/EA_S_AFR/EA_MAL/
EA_PHI/ED_IRAN/ED_VIET/ED_INA/ED_ISRAEL/ED_INDIA/BRA_DTV/CHILE_DTV/
RERU_DTV/ARG_DTV/URU_DTV/PAR_DTV/SA_ATV/SELA/COLOMBIA/TAIWAN
2 Model TC730
SI_ADI/FOX_T2CS2/SITCS2/FOX_T2CSI2176/ECHO_ISDB/SI_ISDB/FOX_T2C_SA/
3 Tuner
AVL6361/
4 Ch Table NONE
5 Front Color NONE
2-25
2. Product specifications
2-5. Accessories
Product Description Code. No Remark
[SM.AMERICA]
BN68-04796E
[HK]
BN68-04796G
[EU/CIS]
BN68-04796S
Quick setup guide
[N.AMERICA]
BN68-04796D
[CHINA]
BN68-04796F
[SE.SW ASIA/MEA]
BN68-04796L
[EU]
BN68-003548D
[CIS]
Warranty card BN68-1925V
(Not available in
some locations) [N.AMERICA]
BN68-00226M Samsung
Electronics Service
[CHINA] Center
BN68-01789A
(The part code for
some accessories
may differ
35W: BN44-00592A depending on your
DC power adaptor 45W: BN44-00593A region.)
58W: BN44-00594A
[N.AMERICA]
AA59-00822A
[EU/CIS/MEA/SE.SW ASIA/HK]
AA59-00823A
[BRAZIL]
Remote Control
AA59-00824A
[SM.AMERICA]
AA59-00825A
[CHINA]
AA59-00826A
Batteries
+
4301-000121
-
+ (AAA x 2)
2-26
2. Product specifications
[EU/SOUTH AFRICA/CHILE/
ALGERIA/ISRAEL/URUGUAY]
3903-000525
[ARGENTINA]
3903-000533
[INDIA]
3903-000541
Samsung
Electronics Service
[PHILIPPINES]
Center
3903-000542
(The part code for
[SOUTH AFRICA]
some accessories
3903-000567
may differ
depending on your
[UNITED STATES/ECUADOR/
region.)
COLOMBIA/PERU/ECUADOR]
3903-000598
D-Sub Cable
BN39-00244H
(Except TC301)
[N.AMERICA]
Stereo Cable
BN39-01286A
2-27
3. Disassembly and Reassemble
As this monitor has parts that are sensitive to static electricity, be careful when handling them.
WARNING
6003-
001782
3-1
3. Disassembly and Reassemble
6003-
001782
27 inch Only
TC730
3-2
3. Disassembly and Reassemble
6003-
000282
3-3
3. Disassembly and Reassemble
NOTE
3-4
3. Disassembly and Reassemble
TC730
3-5
3. Disassembly and Reassemble
27"
3-6
4. Troubleshooting
4. Troubleshooting
4-1. Previous check
1. Check the various cable connections first.
-- Check to see if there is a burnt or damaged cable.
-- Check to see if there is a disconnected or loose cable connection.
-- Check to see if the cables are connected according to the connection diagram.
2. Check the power input to the Main Board.
Main Assy
LVDS Cable
Speaker Speaker
4-1
4. Troubleshooting
The LED on the front panel of the monitor does not work when the power is connected and the Power
Symptom
button is pressed.
• Check if the Power switch on the rear panel of the monitor has been turned on.
Major • Check the output power of power adapter.
checkpoints • Check the power part of the Main Board and check if a similar symptom appears at another output
terminal.
Yes
Yes
Caution Make sure to disconnect the power before working on the Main board.
4-2
4. Troubleshooting
Location of Parts
Location (Main)
CN1601_AD
Detail
BD215
4-3
4. Troubleshooting
Caution Make sure to disconnect the power before working on the Main board.
4-4
4. Troubleshooting
Location of Parts
Location (Main)
CN502_H2 IC901
CN501_H1
Detail
#12 #7
A #12 B
#7
C
O_TXCLK-
E_TXCLK-
O_TXCLK+
E_TXCLK+
4-5
4. Troubleshooting
WAVEFORMS
2 LVDS output
4-6
4. Troubleshooting
Yes
Check the CVBS data at #1 Pin of Tuner. No Change the Main Assy.
Yes
Caution Make sure to disconnect the power before working on the Main board.
4-7
4. Troubleshooting
Location of Parts
IC901
Detail
A
O_TXCLK-
E_TXCLK-
O_TXCLK+
E_TXCLK+
#4
#2
4-8
4. Troubleshooting
WAVEFORMS
1 LVDS output
4-9
4. Troubleshooting
Yes
Caution Make sure to disconnect the power before working on the Main board.
4-10
4. Troubleshooting
Location of Parts
IC901
Detail
A
O_TXCLK-
E_TXCLK-
O_TXCLK+
E_TXCLK+
#4
#2
4-11
4. Troubleshooting
WAVEFORMS
1 LVDS output
4-12
4. Troubleshooting
Yes
Yes
Caution Make sure to disconnect the power before working on the Main board.
4-13
4. Troubleshooting
Location of Parts
Location (Main)
B A
IC901
CN401_COMP
Detail
A
O_TXCLK-
E_TXCLK-
O_TXCLK+
E_TXCLK+
B R703
R701
4-14
4. Troubleshooting
WAVEFORMS
2 LVDS output
4-15
4. Troubleshooting
Yes
Caution Make sure to disconnect the power before working on the Main board.
4-16
4. Troubleshooting
Location of Parts
Location (Main)
B A
IC901
CN401_COMP
Detail
A
O_TXCLK-
E_TXCLK-
O_TXCLK+
E_TXCLK+
R709
4-17
4. Troubleshooting
WAVEFORMS
2 LVDS output
4-18
4. Troubleshooting
4-2-7. No sound
Yes
Diagnostics
Does the DC B13V_AMP_PW appear at
No Change the Main Assy.
BD1602_AD?
Yes
Yes
Replace speaker.
Yes
Caution Make sure to disconnect the power before working on the Main board.
4-19
4. Troubleshooting
Location of Parts
Location (Main)
IC901
IC303
C
B
Detail
R+ R- L+ L-
A R427_COMP B
R426_COMP
BD1602_AD
4-20
4. Troubleshooting
WAVEFORMS
1 Speaker out
4-21
4. Troubleshooting
4-3. Adjustment
4-3-1. Service Instruction
1. U
sually, a color TV-VCR needs only slight touch-up adjustment upon installation. Check the basic characteristics such
as height, horizontal and vertical sync.
2. Use the specified test equipment or its equivalent.
3. Correct impedance matching is essential.
4. Avoid overload. Excessive signal from a sweep generator might overload the front-end of the TV. When inserting signal
markers, do not allow the marker generator to distort test result.
5. Connect the TV only to an AC power source with voltage and frequency as specified on the backcover nameplate.
6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure that the power cord is
disconnected before replacing any parts.
7. To protect aganist shock hazard, use an isolation transform.
Button Functions
• Channel▲/▼ Button : Select an option.
• Volume +/-,◄/► Button : Increase or decrease the value for an option.
• Menu button: Save the current settings to EEPROM and return to the previous mode.
• Number (0 ~ 9) buttons: Change the channel.
4-22
4. Troubleshooting
DTP-SDAL-NT13-MAIN-622.0-0074
RFS : "NT13 0049" KE/ XXXX-XX-XX
KERNERL : "XXXXX_XX"
TCON Version: __
DTP-DTVTD-MFM-XXXX
Model : XXXXXXXX
Factory Data Ver : XXX
EERC Version : XX
DTP-BP-HAL- XXXX
DTP-AP-CNC-XXXX
DTP-AP-MM-XXXX
DTP-BP-MW-XXXX-XX
DTP-BP-APP-XXXX-XX
POP-MFM-PNG-XX-XXXX
Date OF Purchase : -/-/—
4-23
4. Troubleshooting
Sub-Page of Service
Option
Factory Menu Name Data Remark
Factory Reset -
NONE/19B6TH0E/20D6TW0E/22B6DF0E/22D
Type 24L6TF0E 6TF0E/23A6LF0E/23A6TF0E/24B6DF0E/24D
6TF0E/24L6TF0E/27D6TF0E/27A6LF0E
NONE/US/KOR/SD_MEXICO/SC_CANADA/
Local Set US
CARRIBE
TC301/TC310/TC350/TC370/TC550/TC570/
SW Model TC350
TC730/TC350WOT
BOM Model 350 XXX
AUTO/SI_ADI/FOX_T2CS2/SI_TCS2/
Tuner SI_ADI FOX_T2C/SI2176/ECHO_ISDB/SI_ISDB/
FOX_T2C_SA/AVL6361/Error
Ch Table NONE NONE/SUWON/SAMES
MRT option
None/P-W-D-40/P-W-D-49/P-W-D-55/P-W-
D-85/U-S-C-5K/U-T-CL-M61/U-T-CL-M62/U-
Front Color None
T-CL-M63/U-T-CL-M64/U-T-CL-M68/U-T-CL-
M65/U-T-CL-M71/U-CF-B20
Lvds Format VESA VESA/19INCH
UNKNOWN/EAST ASIA/IRAN/ISRAEL/
MIDDLE ASIA/S_AMERICA/TAIWAN/
Language_Arabis US AFRICA/N_AFRICA/WEST ASIA/MALAYSIA/
KR/US/CIS/TURKEY/CHINA/HONGKONG/
JAPAN/CANADA/PHILIPINE/EU/AUSTRAILIA
Region USA USA/KOR
PnP Language ENG_US ENG_US/SPA_US/FRA_US
WIFI REGION A A~Z/AA/AB
OTN Support OFF OFF/ON
MediaPlay DLNA
TTX OFF OFF/ON
China HD OFF OFF/ON
NT Conversion OFF OFF/ON
Num of DTV 2 0~2
Num of AV 1 0~3
Num of COMP 1 0~3
Num of HDMI 2 0~4
Num of SCART 0 0~2
Num of USB Port 1 0~2
Num of RVU 0 0~1
Num Of Display 2 1~2
Num of IPTV 0 0~1
Num of RUI 0 0~1
4-24
4. Troubleshooting
Option
Factory Menu Name Data Remark
TOOLS Support 57 XXX
LNA Support 0 0~1
24Px4 Support OFF OFF/ON
BD Wise Support OFF OFF/ON
Data Service Support OFF OFF/ON
PVR Support OFF OFF/ON
CI Support OFF OFF/ON
OTA Support OFF OFF/ON
LEDMotionPlus Support OFF OFF/ON
Natural Mode Support OFF OFF/ON
Relax Mode Support OFF OFF/ON
HDMI/DVI SEL 1 1~4
Select LCD/PDP LCD LCD/PDP
Wall Mount 0 0~1
HV Flip OFF OFF/ON
PVR RECORD NUM 0 0~2
Light Effect OFF OFF/ON
e-Pop Default ON OFF/ON
CAMERA Support OFF OFF/ON
Not Suppport/Cable/Ext-Wifi/Int-Wifi/ExtOnly-
NETWORK Support NotSupport
Wifi/Error
EcoSensor Support OFF OFF/ON
3D Support OFF OFF/ON
BT Support OFF OFF/ON
BT ADDRESS 0 0~1
HP LINE Headphone Headphone/LineOut/NONE
Engineer Option
Auto Power MEMORY MEMORY/ALWAYS ON/ALWAYS OFF
Horizontal/Vertical/PDPVertical/PDPHorizon/
Type Of PANEL KEY Horizontal
None
L_BOTTOM/R_BOTTOM/L_BACK/R_
5 Way Function Key L_BOTTOM
BACK/C_BOTTOM/5
Contents Bar 0 0~1
Cable Modulation Error QAM/8VSB/Error
Standby led on/off OFF OFF/ON
Recognition Support OFF OFF/ON
IF AGC 0 0~10
D AGC 0 0~10
PH BW 3 0~10
4-25
4. Troubleshooting
Option
Factory Menu Name Data Remark
FQ BW 3 0~10
PH RATE 4 0~10
PD EN 1 0~10
PEQ Inx 4 XXX
WF Scale
Num of Network Stream 0 0~1
DP V Size 1 0~1
Backend Device ECHO_FS NONE/ECHO_FP/ECHO_FS/PARMA
BT_AUDIO_ON_OFF OFF OFF/ON
Config_AV_PATH
"1234/1243/1324/1342/1423/1432/
2134/2143/2314/2341/2413/2431/
V_HDMI IDENT TYPE 2134
3124/3142/3214/3241/3412/3421/
4123/4132/42134231/4312/4321"
ABCD/ABDC/ACBD/ACDB/ADBC/ADCB/
BACD/BADC/BCAD/BCDA/BDAC/BDCA/
V_HDMI PATH TYPE BACD
CABD/CADB/CBAD/CBDA/CDAB/CDBA/
DABC/DACB/DBAC/DBCA/DCAB/DCBA/
18_5_HD/19_5_HD/21_5_FHD/23_
V_EDID TYPE 23_6_FHD
FHD/23_6_FHD/24_FHD/27_FHD
NONE/ADC_PORT_0/ADC_PORT_1/
ADC_PORT_2/ADC_PORT_3/ADC_PORT_4/
ADC_PORT_5/ADC_PORT_6/CVBS_
PORT_0/CVBS_PORT_1/CVBS_PORT_2/
V_ATV CVBS_PORT_2
CVBS_PORT_3/CVBS_PORT_4/CVBS_
PORT_5/CVBS_PORT_6/CVBS_PORT_7/
AV_COMP_G0/AV_COMP_G1/AV_COMP_
G2/AV_COMP_G3
NONE/ADC_PORT_0/ADC_PORT_1/
ADC_PORT_2/ADC_PORT_3/ADC_PORT_4/
ADC_PORT_5/ADC_PORT_6/CVBS_
PORT_0/CVBS_PORT_1/CVBS_PORT_2/
V_AV1 AV_COMP_G1
CVBS_PORT_3/CVBS_PORT_4/CVBS_
PORT_5/CVBS_PORT_6/CVBS_PORT_7/
AV_COMP_G0/AV_COMP_G1/AV_COMP_
G2/AV_COMP_G3
NONE/ADC_PORT_0/ADC_PORT_1/
ADC_PORT_2/ADC_PORT_3/ADC_PORT_4/
ADC_PORT_5/ADC_PORT_6/CVBS_
PORT_0/CVBS_PORT_1/CVBS_PORT_2/
V_AV2 None
CVBS_PORT_3/CVBS_PORT_4/CVBS_
PORT_5/CVBS_PORT_6/CVBS_PORT_7/
AV_COMP_G0/AV_COMP_G1/AV_COMP_
G2/AV_COMP_G3
NONE/ADC_PORT_0/ADC_PORT_1/
ADC_PORT_2/ADC_PORT_3/ADC_PORT_4/
ADC_PORT_5/ADC_PORT_6/CVBS_
PORT_0/CVBS_PORT_1/CVBS_PORT_2/
V_COMP1 ADC_PORT_1
CVBS_PORT_3/CVBS_PORT_4/CVBS_
PORT_5/CVBS_PORT_6/CVBS_PORT_7/
AV_COMP_G0/AV_COMP_G1/AV_COMP_
G2/AV_COMP_G3
4-26
4. Troubleshooting
Option
Factory Menu Name Data Remark
NONE/ADC_PORT_0/ADC_PORT_1/
ADC_PORT_2/ADC_PORT_3/ADC_PORT_4/
ADC_PORT_5/ADC_PORT_6/CVBS_
PORT_0/CVBS_PORT_1/CVBS_PORT_2/
V_COMP2 None
CVBS_PORT_3/CVBS_PORT_4/CVBS_
PORT_5/CVBS_PORT_6/CVBS_PORT_7/
AV_COMP_G0/AV_COMP_G1/AV_COMP_
G2/AV_COMP_G3
NONE/ADC_PORT_0/ADC_PORT_1/
ADC_PORT_2/ADC_PORT_3/ADC_PORT_4/
ADC_PORT_5/ADC_PORT_6/CVBS_
PORT_0/CVBS_PORT_1/CVBS_PORT_2/
V_PC ADC_PORT_0
CVBS_PORT_3/CVBS_PORT_4/CVBS_
PORT_5/CVBS_PORT_6/CVBS_PORT_7/
AV_COMP_G0/AV_COMP_G1/AV_COMP_
G2/AV_COMP_G3
NONE/ADC_PORT_0/ADC_PORT_1/
ADC_PORT_2/ADC_PORT_3/ADC_PORT_4/
ADC_PORT_5/ADC_PORT_6/CVBS_
PORT_0/CVBS_PORT_1/CVBS_PORT_2/
V_SCART1_CVBS CVBS_PORT_3
CVBS_PORT_3/CVBS_PORT_4/CVBS_
PORT_5/CVBS_PORT_6/CVBS_PORT_7/
AV_COMP_G0/AV_COMP_G1/AV_COMP_
G2/AV_COMP_G3
NONE/ADC_PORT_0/ADC_PORT_1/
ADC_PORT_2/ADC_PORT_3/ADC_PORT_4/
ADC_PORT_5/ADC_PORT_6/CVBS_
PORT_0/CVBS_PORT_1/CVBS_PORT_2/
V_SCART1_RGB ADC_PORT_2
CVBS_PORT_3/CVBS_PORT_4/CVBS_
PORT_5/CVBS_PORT_6/CVBS_PORT_7/
AV_COMP_G0/AV_COMP_G1/AV_COMP_
G2/AV_COMP_G3
NONE/ADC_PORT_0/ADC_PORT_1/
ADC_PORT_2/ADC_PORT_3/ADC_PORT_4/
ADC_PORT_5/ADC_PORT_6/CVBS_
PORT_0/CVBS_PORT_1/CVBS_PORT_2/
V_SCART2_CVBS None
CVBS_PORT_3/CVBS_PORT_4/CVBS_
PORT_5/CVBS_PORT_6/CVBS_PORT_7/
AV_COMP_G0/AV_COMP_G1/AV_COMP_
G2/AV_COMP_G3
NONE/ADC_PORT_0/ADC_PORT_1/
ADC_PORT_2/ADC_PORT_3/ADC_PORT_4/
ADC_PORT_5/ADC_PORT_6/CVBS_
PORT_0/CVBS_PORT_1/CVBS_PORT_2/
V_SCART2_RGB None
CVBS_PORT_3/CVBS_PORT_4/CVBS_
PORT_5/CVBS_PORT_6/CVBS_PORT_7/
AV_COMP_G0/AV_COMP_G1/AV_COMP_
G2/AV_COMP_G3
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_ATV SIF AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_DTV DECODER AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_AV1 AUIN1 AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
4-27
4. Troubleshooting
Option
Factory Menu Name Data Remark
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_AV2 AUIN3 AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_COMP1 AUIN1 AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_COMP2 None AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_PC AUIN0 AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_SCART1 AUIN2 AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_SCART2 None AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_DVI AUIN0 AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_HDMI None AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
NONE/AUIN0/AUIN1/AUINA2/AUINA3/
A_Media DECODER AUINA4/AUINA5/I2S/SPDIF/SIF/VIF/
DEECODER/AUX1/AUX2/AUX3
USING_PSI_UPDATE …
Fast Logo Delay 0 0~20
Num of PANEL KEY 6 0~20
Control
Factory Menu Name Data Remark
EDID
EDID ON/OFF OFF ON/OFF
EDID WRITE ALL … Success/Failure
EDID WRITE PC … Success/Failure
EDID WRITE HDMI … Success/Failure
EDID WRITE HDMI1 … Success/Failure
EDID WRITE HDMI2 … Success/Failure
EDID WRITE HDMI3 … Success/Failure
4-28
4. Troubleshooting
Control
Factory Menu Name Data Remark
Sub Option
RS-232 Jack Debug Debug/UATL/Logic/FANET
Serial Log On/Off ON ON/OFF
Watchdog OFF ON/OFF
Checksum 0x0000 0
Fast Boot in Production ON ON/OFF
USB Serial OFF ON/OFF
Eeprom Reset 0 0~255
EER RESET 0 0
4-29
4. Troubleshooting
Control
Factory Menu Name Data Remark
Num of DECODER 0 0~2
T-CON Device
BOARD CONTROL OFF ON/OFF
RM
Server Type operating operating/development
RTS mode 0 0~1
PSA
FKP Download1
FKP Download2
LMK threshold 0 xxx
Low threshold 0 xxx
High threshold 0 xxx
CSB ON ON/OFF
CLB ON ON/OFF
EEPG Enable OFF ON/OFF
Hotel Option
Hospitality Mode OFF ON/OFF
Power On …
Menu OSD …
Operation …
Music Mode …
External Source …
Eco Solution …
Cloning …
Shop Option
Shop Mode OFF ON/OFF
4-30
4. Troubleshooting
Control
Factory Menu Name Data Remark
High Devi OFF ON/OFF
Carrier_Mute ON ON/OFF
Speaker Delay Normal 0 0~255
Wiselink Dealy Menu 0 0~150
Pilot Level High Thld 0x0Fh 0x00h~0xFFh/
Pilot Level Low Thld 0x08h 0x00h~0xFFh/
Pliot _Phase_diff_on_THR OFF ON/OFF
FM Prescale 0x17h 0x00h~0xFFh/
AM Prescale 0x1Ah 0x00h~0xFFh/
NICAM Prescale 0x1Dh 0x00h~0xFFh/
Amp Model NTP7412 NTP7412S2/TAS5745/NTP7412
Amp Volume 0xc7h 0x00h~0xFFh/
Amp Scale 0x4dh 0x00h~0xFFh/
Amp Check Sum 0x01F188B0 0x01F188B0
SubWoofer Support 0 0~7
Woofer Type 0 0~7
Woofer Volume 0xcbh 0x00h~0xFFh/
Woofer Scale 0x8ah 0x00h~0xFFh/
Woofer Check Sum NONE
Woofer Local Check Sum NONE
Amp Local Check Sum NONE
Speaker EQ ON ON/OFF
PEQ Test Ready Ready/Set1~Set5
Speaker cut-off Freq 5 0~16
SPDIF PCM Gain -9 dB -10DdB~0dB
FM M Prescale 0 0~255
BTSC Mono Prescale 15 0~255
BTSC stereo Prescale 29 0~255
SAP Prescale 29 0~255
A2 Ident High Thld 11 0~255
A2 Ident Low Thld 5 0~255
Carrier2 Amp High Thld 4 0~255
Carrier2 Amp Low Thld 2 0~255
Carrier2 SNR High THR 32 0~255
Carrier2 SNR Low THR 15 0~255
Audio-IP Test Ready Ready/Set1~Set9
SRS Tuning Param 0 0~255
TruBass-CheckSum 0 0~255
4-31
4. Troubleshooting
Control
Factory Menu Name Data Remark
Mic Scale 0 0~255
India Sound OFF ON/OFF
Wall Filter Type 0 0~7
SAP High Thld 9 0~255
SAP Low Thld 7 0~255
Debug
Factory Menu Name Data Remark
Spread Spectrum
LVDS Spread ON ON/OFF
LVDS Period 40K 20K/30K/40K
LVDS Amplitude 1.0 0.0/0.5/1.0/1.5/2.0
DDR Spread OFF ON/OFF
DDR Period 20k 20K/30K/40K
DDR Amplitude 0.0 0.0/0.5/1.0/1.5/2.0
FRC LVDS SSC ON/OFF ON ON/OFF
FRC LVDS SSC MFR 1 0~255
FRC LVDS SSC MRR 10 0~255
FRC LVDS SSC Period 0 0~255
FRC LVDS SSC Modulation 1 0~5
FRC DDR SSC ON/OFF ON ON/OFF
FRC DDR SSC MFR 1 0~255
4-32
4. Troubleshooting
Debug
Factory Menu Name Data Remark
Tuner Margin 0 0~1
GPEG Margin 1000 0~1500
H.264 Margin 8 0~255
CAM Wait Time 0 0~1
TS Clock delay 0 0
TCON_TEMP READ 0.00 0.00
TEMP LAST 60.00 0.00~100.00
DCC VERSION 0x0 0x0
DCC CHK SEL 0 0~21
DCC CHECK LOCAL 0x0 0x0
DCC CHECK TOTAL 0x0 0x0
MultiACC Checksum 0 0
IIC Bus Stop OFF ON/OFF
Tuner Status
DVB
SNR
BER
Signal Strength
Bandwidth
Frequency
LNA Status
FFT
Modulation
Code Rate
GI
Hier Modulation
Frequency Offset
Timing Offset
AGC
UCB
PLL Type
DEMOD Type
TPS Lock
RS Lock
SSI
SQI
Firmware Version
ISDB-T
4-33
4. Troubleshooting
Debug
Factory Menu Name Data Remark
FFT Size_1
Guard Interval_1
Freq. Offset_1
SNR_1
IF AGC_1
TMCC Lock_1
TS Packet_1
Master Lock_1
A_Modulation_1
A_Code Rate_1
A_Timer InterLeave_1
A_Segments Num_1
A_BER_1
B_Modulation_1
B_Code Rate_1
B_Timer InterLeave_1
B_Segments Num_1
B_BER_1
C_Modulation_1
C_Code Rate_1
C_Timer InterLeave_1
C_Segments Num_1
C_BER_1
SVC
Factory Menu Name Data Remark
Test Pattern
OFF/CHESS/VISON1/VISON2/8COLOR
Pattern Sel OFF BAR/RGB_RAMP/WHITE/RED/GREEN/
BLUE/16GRAY/32GARY/BLACK/RGB_COMP
Logic Pattern Sel …
Logic Level Sel …
FRC Pre Test Pattern 0 0~1
FRC Post Tset Pattern 0 0~1
SOC TCON Test Pattern 0 0~1
SOC TCON Pattern Level 0 0~1
SOC TCON FRC Pattern 0 0~1
HDMI WB Pattern 0 0~1
HDMI Pattern Sel 0 0~1
4-34
4. Troubleshooting
SVC
Factory Menu Name Data Remark
SVC Info 0
Delete S/N Failure Failure/Success
Upgrade
T-CON Usb Download Failure
4-35
4. Troubleshooting
SVC
Factory Menu Name Data Remark
Tuner1
Sound AMP Failure Failure/Success
HDMI Switch IC Failure Failure/Success
4-36
4. Troubleshooting
SVC
Factory Menu Name Data Remark
HDMI 3D DET 0 0~1
DVB CI
TS Clock delay TC
TS Clock delay S
CI Control Buf ON ON ON/OFF
TS Clock delay CPU -1 -15~15
CAL Data Backup_Copy …
CAL Data Restore_Copy 0
Expert
N/D ADJ
Source
ADC/WB
Factory Menu Name Data Remark
ADC
AV Calibration
Comp Calibration
PC Calibration
HDMI Calibration
ADC Result
1st_Y_GH 128 0~511
1st_Y_GL 128 0~1023
1st_Cb_BH ... 0~1020
1st_Cb_BL ... 0~1020
1st_Cr_RH ... 0~1020
1st_Cr_RL ... 0~1020
2nd_R_L 133 0~255
2nd_G_L 133 0~255
2nd_B_L 133 0~255
2nd_R_H 70 0~255
2nd_G_H 70 0~255
2nd_B_H 70 0~255
White Balance
R-Offset 128 0~255
G-Offset 128 0~255
B-Offset 128 0~255
R-Gain 128 0~255
4-37
4. Troubleshooting
ADC/WB
Factory Menu Name Data Remark
G-Gain 128 0~255
B-Gain 128 0~255
WB_W2_R_Offset 128
WB_W2_B_Offset 128
WB_W2_R_Gain 156
WB_W2_B_Gain 85
WB_N_R_Offset 128
WB_N_B_Offset 128
WB_N_R_Gain 139
WB_N_B_Gain 116
MGA
MGA MGA On/Off OFF
R1_Gain 512
G1_Gain 512
B1_Gain 512
R2_Gain 512
G2_Gain 512
B2_Gain 512
R3_Gain 512
G3_Gain 512
B3_Gain 512
R4_Gain 512
G4_Gain 512
B4_Gain 512
R5_Gain 512
G5_Gain 512
B5_Gain 512
R6_Gain 512
G6_Gain 512
B6_Gain 512
R7_Gain 512
G7_Gain 512
B7_Gain 512
R8_Gain 512
G8_Gain 512
B8_Gain 512
R9_Gain 512
G9_Gain 512
4-38
4. Troubleshooting
ADC/WB
Factory Menu Name Data Remark
B9_Gain 512
R10_Gain 512
G10_Gain 512
B10_Gain 512
4-39
4. Troubleshooting
SVC
Service Adjustment
NOTE
You must perform Calibration in the Lattice Pattern before adjusting the White Balance.
Color Calibration
Adjust Specification
• Source: HDMI
• Setting Mode: 1280x720@60Hz
• Pattern: Pattern #92 (Chess Pattern)
NOTE
Use other equipment only after comparing the result with that of the Master equipment.
4-40
4. Troubleshooting
Method of Color Calibration (AV)
1. Apply the NTSC Lattice (N0. 3) pattern signal to the AV IN 1 port
2. Press the Source key to switch to “AV1” mode
3. Enter Service mode
4. Select the “ADC” menu
5. Select the “AV Calibration” menu.
6. In “AV Calibration Off” status, press the “ ►” key to perform Calibration.
7. When Calibration is complete, it returns to the high-level menu.
8. You can see the change of the “AV Calibration” status from Failure to Success.
4-41
4. Troubleshooting
4-42
4. Troubleshooting
• Equipment : CA210
• Pattern: MIK K-7256 #92 “Flat W/B Pattern” as standard
NOTE
Use other equipment only after comparing the result with that of the Master equipment.
• Set Aging time : 60min
NOTE
4-43
4. Troubleshooting
White Balance Manual Adjustment
T19C350
Adjustment Coordinate
P-Mode
x y Y(Luminance) T(K) + MPCD
[Dynamic Cool1] R-Gain : 116
H/L 271 291 B-Gain : 160 10,000 (±0)
HDMI Sub_CT : 128
Comp - fL
CVBS L/L Does not adjust 10,000 (±0)
(Sub-Brt:128 Fix)
[Movie Warm2] -
H/L 316 346 6,500 (±6)
(M_Sub_CT:128 Fix)
HDMI
Comp -
L/L Does not adjust 6,500 (±6)
CVBS (Sub_Brt:128 Fix)
T22C301/T22C350
Adjustment Coordinate
P-Mode
x y Y(Luminance) T(K) + MPCD
[Dynamic Cool1] R-Gain : 104
H/L 271 291 B-Gain : 179 10,000 (±0)
HDMI Sub_CT : 128
Comp - fL
CVBS L/L Does not adjust 10,000 (±0)
(Sub-Brt:128 Fix)
[Movie Warm2] -
H/L 316 346 6,500 (±6)
(M_Sub_CT:128 Fix)
HDMI
Comp -
L/L Does not adjust 6,500 (±6)
CVBS (Sub_Brt:128 Fix)
T23C350
Adjustment Coordinate
P-Mode
x y Y(Luminance) T(K) + MPCD
[Dynamic Cool1] R-Gain : 100
H/L 271 291 B-Gain : 172 10,000 (±0)
HDMI Sub_CT : 128
Comp - fL
CVBS L/L Does not adjust 10,000 (±0)
(Sub-Brt:128 Fix)
[Movie Warm2] -
H/L 316 346 6,500 (±6)
(M_Sub_CT:128 Fix)
HDMI
Comp -
L/L Does not adjust 6,500 (±6)
CVBS (Sub_Brt:128 Fix)
4-44
4. Troubleshooting
T23C370
Adjustment Coordinate
P-Mode
x y Y(Luminance) T(K) + MPCD
[Dynamic Cool1] R-Gain : 110
H/L 271 291 B-Gain : 172 10,000 (±0)
HDMI Sub_CT : 128
Comp - fL
CVBS L/L Does not adjust 10,000 (±0)
(Sub-Brt:128 Fix)
[Movie Warm2] -
H/L 316 346 6,500 (±6)
(M_Sub_CT:128 Fix)
HDMI
Comp -
L/L Does not adjust 6,500 (±6)
CVBS (Sub_Brt:128 Fix)
T24C370 (23.6’’)
Adjustment Coordinate
P-Mode
x y Y(Luminance) T(K) + MPCD
[Dynamic Cool1] R-Gain : 109
H/L 271 291 B-Gain : 164 10,000 (±0)
HDMI Sub_CT : 128
Comp - fL
CVBS L/L Does not adjust 10,000 (±0)
(Sub-Brt:128 Fix)
[Movie Warm2] -
H/L 316 346 6,500 (±6)
(M_Sub_CT:128 Fix)
HDMI
Comp -
L/L Does not adjust 6,500 (±6)
CVBS (Sub_Brt:128 Fix)
4-45
4. Troubleshooting
T24C350 (24")
Adjustment Coordinate
P-Mode
x y Y(Luminance) T(K) + MPCD
[Dynamic Cool1] R-Gain : 95
H/L 271 291 B-Gain : 163 10,000 (±0)
HDMI Sub_CT : 128
Comp - fL
CVBS L/L Does not adjust 10,000 (±0)
(Sub-Brt:128 Fix)
[Movie Warm2] -
H/L 316 346 6,500 (±6)
(M_Sub_CT:128 Fix)
HDMI
Comp -
L/L Does not adjust 6,500 (±6)
CVBS (Sub_Brt:128 Fix)
T27C350
Adjustment Coordinate
P-Mode
x y Y(Luminance) T(K) + MPCD
[Dynamic Cool1] R-Gain : 107
H/L 271 291 B-Gain : 189 10,000 (±0)
HDMI Sub_CT : 128
Comp - fL
CVBS L/L Does not adjust 10,000 (±0)
(Sub-Brt:128 Fix)
[Movie Warm2] -
H/L 316 346 6,500 (±6)
(M_Sub_CT:128 Fix)
HDMI
Comp -
L/L Does not adjust 6,500 (±6)
CVBS (Sub_Brt:128 Fix)
LT27C730
Adjustment Coordinate
P-Mode
x y Y(Luminance) T(K) + MPCD
[Dynamic Cool1] R-Gain : 102
H/L 271 291 B-Gain : 171 10,000 (±0)
HDMI Sub_CT : 128
Comp - fL
CVBS L/L Does not adjust 10,000 (±0)
(Sub-Brt:128 Fix)
[Movie Warm2] -
H/L 316 346 6,500 (±6)
(M_Sub_CT:128 Fix)
HDMI
Comp -
L/L Does not adjust 6,500 (±6)
CVBS (Sub_Brt:128 Fix)
Adjustment Specification
• White Balance(x,y) : High light (±0.003), Low light (±0.005)
• Luminance(Y) : High light HY (±10%), Low light LY (±10%)
4-46
4. Troubleshooting
4-47
4. Troubleshooting
Option T-NTFMAKUC-XXX
T-NTFMAUSS-XXX
Control
E-Manual : NVATSCF-XXXX
Debug
EDID SUCCESS
SVC CALIB : AV / COM / PC / HDMI /
ADC/WB Option : XXXX XXXX XXXX X
USB RS232C:OFF
Advanced
DTP-SDAL-NT13-MAIN-622.0-0074
RFS : "NT13 0049" KE/ XXXX-XX-XX
KERNERL : "XXXXX_XX"
TCON Version: —
DTP-DTVTD-MFM-XXXX
Model : XXXXXXXX
Factory Data Ver : XXX
EERC Version : XX
DTP-BP-HAL- XXXX
DTP-AP-CNC-XXXX
DTP-AP-MM-XXXX
DTP-BP-MW-XXXX-XX
DTP-BP-APP-XXXX-XX
POP-MFM-PNG-XX-XXXX
Date OF Purchase : -/-/—
4-48
4. Troubleshooting
Main SW upgrade
1. Store the sw program named "T-NTFMUMAC" in USB memory stick.
2. Connect the USB.
4-49
4. Troubleshooting
8. Click the ENTER key.
4-50
4. Troubleshooting
Option
Control
Debug
SVC
ADC/WB
Advanced
Test Pattern
Upgrade
Smart Hub Reset 0
ER Count
LOG
Self Diagnosis
IPERF Stopped
OPTION_HDMI
DVB CI
CAL Data Backup_Copy ...
CAL Data Restore_Copy 0
Expert
4-51
4. Troubleshooting
5. Press the “►” button on the remocon and wait the completion of upgrade. The system will be reset after upgrade.
WARNING
4-52
4. Troubleshooting
A B C D E F G H I
18.5" 135 17 12 62.33 49 180 82 84 116.32
21.5" 135 17 12 101.65 86.65 180 82 123.8 153.6
23" 135 17 12 161.09 104.78 180 82 183.01 173.2
23.6" 135 17 12 171.77 116.90 180 82 193.87 184.72
24" 135 17 12 171.77 116.90 180 82 193.87 184.72
27" 135 17 12 207.77 128.97 180 82 230.96 278.21
4-53
5. Wiring Diagram
5. Wiring Diagram
5-1. Wiring Diagram
T**C350 / T**C301 / T**C370 / T**C550
5-1
5. Wiring Diagram
T**C730
5-2
5. Wiring Diagram
5-2. Board Connection
Main board
3 8
4
6 9
10 11 12
5-3
5. Wiring Diagram
5 CN1201_FHD 11 CN402(FUNCTION)
1 PANEL_13V_PW 16 EVEN_TX1-_LVDS 1 IR 5 MSDA
2 PANEL_13V_PW 17 DGND 2 DGND 6 KEY_INPUT1
3 PANEL_13V_PW 18 EVEN_TX0+_LVDS 3 A3.3V_PW 7 KEY_INPUT2
4 19 EVEN_TX0-_LVDS 4 MSCL 8 DGND
5 20 ODD_TX3+_LVDS
12 CN302(SPEAKER)
6 21 ODD_TX3-_LVDS
7 DGND 22 ODD_TXCLK+_LVDS 1 R+ 3 L+
8 EVEN_TX3+_LVDS 23 ODD_TXCLK-_LVDS 2 R- 4 L-
9 EVEN_TX3-_LVDS 24 DGND
EVEN_TXCLK+_
10 25 ODD_TX2+_LVDS
LVDS
11 EVEN_TXCLK-_LVDS 26 ODD_TX2-_LVDS
12 EVEN_TX2+_LVDS 27 ODD_TX1+_LVDS
13 EVEN_TX2-_LVDS 28 ODD_TX1-_LVDS
14 29 ODD_TX0+_LVDS
15 EVEN_TX1+_LVDS 30 ODD_TX0-_LVDS
6 CN401_COMP
1 DGND 9 TEST_COMP_PR
2 COMP1_Y_CVBS 10 DGND
3 IDENT_VIDEO1 11 COMP1_SL_IN
4 DGND 12 TEST_SL
5 COMP1_PB 13 DGND
6 IDENT_COMP1 14 COMP1_SR_IN
7 DGND 15 TEST_SR
8 COMP1_PR
7 CN1601_AD
1 A14V_PW 3 DGND
2 DGND 4 DGND
10 CN1701_AD
1 LED1 4 VLED
2 LED2 5 LED3
3 VLED 6 LED4
5-4
5. Wiring Diagram
5-3. Connector Functions
Connector Functions
CN1201_FHD/CN1202_HD ↔ T-CON CNF1 The LVDS signal transfered from Main Board to Panel .
5-4. Cables
T19C301/T19C350
Use LEAD (PD-PANEL 6P) LVDS CABLE
Code BN39-01476J BN96-26694T
Photo
T22C301/T22C350
Use LEAD (PD-PANEL 6P) LVDS CABLE
Code BN39-01465H BN96-26694G
Photo
5-5
5. Wiring Diagram
T23C350/T23C370
Use LEAD (PD-PANEL 6P) LVDS CABLE
Code BN39-01465H BN96-26694G
Photo
T24C301/T24C350/T24C370/T24C550
Use LEAD (PD-PANEL 6P) LVDS CABLE
Code BN39-01476P BN96-24731Z
Photo
5-6
5. Wiring Diagram
T27C370 / T27C730
Use LEAD (PD-PANEL 6P) LVDS CABLE
Code BN39-01817A BN96-27306H
Photo
5-7