Professional Documents
Culture Documents
Copyright VW AG
Brand Model year Sales model Engine code Gearbox code Final drive code
V 2006 3C% - --- BVY% % %
Workshop findings:
• As part of a repair/exhaust emissions test (and so on) it is established that the catalyst has to be replaced.
Technical background
If a catalytic converter with part number 06F 253 052 X or 06F 253 052 AX has been fitted in service, the
software version of the engine control unit must be checked according to the following table. If necessary, a
software update for the engine control unit has to be carried out..
The software versions listed in the following table were up-to-date when this TPI was published. Further
software versions may have been released since. At least the software version listed in the "New" column (or
higher) must be used.
https://erwin.volkswagen.de/erwin/rp/CSP/Retail/ELSAPRO/Show 1/3
2/3/2020 Technical product information 2017198/3
06F 906 056 FC 7684, 8228, 06F 906 056 GP 0459 030 34/2007
8936, 9163
7882, 8083,
06F 906 056 GC 8120, 8603, 06F 906 056 GQ 0460 030 34/2007
8935, 9161
7000, 7001,
06F 906 056 AM 7002, 7003, 06F 906 056 AM 9783 033 34/2007
7296, 7553
7001, 7002,
06F 906 056 AN 7302, 7566, 06F 906 056 AN 9743 033 34/2007
7967
7689, 7904,
06F 906 056 FF 06F 906 056 FF 9605 030 34/2007
8221, 9153
7690, 8231,
06F 906 056 FG 06F 906 056 FG 9606 030 34/2007
9154
7669, 8225,
06F 906 056 EK 06F 906 056 EK 9607 030 34/2007
9150
06F 906 056 GJ 7781, 8222 06F 906 056 GJ 9157 1FBF 34/2007
06F 906 056 EM 7672, 8229 06F 906 056 EM 9156 1FBF 34/2007
7714, 8081,
06F 906 056 DQ 06F 906 056 DQ 9151 041 15/2008
8118, 8604
06F 906 056 EJ 8235 06F 906 056 EJ 9149 041 15/2008
06F 906 056 EL 8232 06F 906 056 EL 9152 041 15/2008
06F 906 056 FH 7665, 7884 06F 906 056 FH 9155 041 15/2008
06F 906 056 GG 8233, 8937 06F 906 056 GG 9164 041 15/2008
The software variants 06F 906 056 GJ and 06F 906 056 EM can only be updated online via an action code.
On the following engine control units a software update must be carried out.
• 06F 906 056 JE 0851
• 06F 906 056 JF 1055
• 06F 906 056 JK 0856
• 06F 906 056 JL 0857
After replacing the catalyst, use the new software to make the following adjustment to the engine control unit in
self-diagnosis mode:
• Engine control unit
• Access authorisation
• Automatic access authorisation
• Input 20874
https://erwin.volkswagen.de/erwin/rp/CSP/Retail/ELSAPRO/Show 2/3
2/3/2020 Technical product information 2017198/3
• Perform
The online update of the control units via SVM (Software Version Management) can only be performed with a
networked Offboard diagnostic information system service. To find out the calendar week from which the
software is available online, refer to the column online from week*.
You also receive the new software with the update DVD software adaptation for control units. To find out the
DVD from which the software is available, refer to the "From DVD" column. Even with the DVD an online
connection is necessary (insert DVD and start update via SVM).
Production change
—
Measure
—
https://erwin.volkswagen.de/erwin/rp/CSP/Retail/ELSAPRO/Show 3/3