Professional Documents
Culture Documents
TCC94 Two Way Slabs Tables
TCC94 Two Way Slabs Tables
Edge 4
Edge 2
Lx = 9 m
LOADING characteristic EDGE CONDITIONS
Self weight kN/m² 5.00 Edge 1 C C = Continuous
Extra dead kN/m² 1.50 Edge 2 C D = Discontinuous Ly = 9.01 m
Total Dead, gk kN/m² 6.50 γG = 1.25 Edge 3 D
Imposed, qk kN/m² 5.00 γQ = 1.50 Edge 4 C 2
Design load, n kN/m² 15.62 PLAN Edge 3
DEFLECTION
x = mm 55.8 47.6 55.8 53.4 35.8 53.4
sc = MPa 5.44 6.30 7.25 7.59 0.00 7.59 7.2 (3)
r = 0.318 r0 = 0.548 Bae ratio = 46.65 Mod factor = 1.167 Eqn 7.16
Perm L/d = 54.43 Actual L/d = 53.25 Asx enhanced 33.3% for deflection control
TORSION STEEL BOTH EDGES DISCONTINUOUS ONE EDGE DISCONTINUOUS Bottom steel
Ø mm 10 X Y X Y not curtailed
in edge strips
As req mm²/m 403 255
at free edges
As prov T mm²/m 5000 5000 262 754
Additional As T req mm² 0 0 0 0
SUPPORT REACTIONS (kN/m char uno) Over central ¾ of supporting beams Sum ßvx = 0.614
EDGE 1 EDGE 2 EDGE 3 EDGE 4 Sum ßvy = 0.720
1, F-G G, 2-1 2, F-G F, 2-1
ßv 0.368 0.360 0.246 0.360
Dead kN/m 21.56 21.06 14.37 21.06
Imposed kN/m 16.58 16.20 11.05 16.20
Vs kN/m 51.8 50.6 34.5 50.6
OUTPUT/SUMMARY
SHORT LONG EDGE 1 EDGE 2 EDGE 3 EDGE 4
PROVIDE SPAN SPAN 1, F-G G, 2-1 2, F-G F, 2-1
MAIN STEEL T12 @ 150 B1 T12 @ 200 B2 T12 @ 150 T1 T12 @ 150 T2 T10 @ 300 T1 T12 @ 150 T2
2-WAY SPANNING INSITU CONCRETE SLABS to EN 1992-1:2004 and standard tables Made by RMW Job No R68
BOTTOM STEEL
Short span - middle T 12 @ 150 46 7400 0.888 302.2
edges T 12 @ 150 14 9275 0.888 115.3
Long span - middle T 12 @ 200 34 7375 0.888 222.6
edges T 12 @ 200 10 9325 0.888 82.8
SUMMARY
Reinforcement density (kg/m³) 73.8 Total reinforcement in bay (kg) 1216
National Annex values
EC2 Ref Function Value
Table 2.2 γc 1.5 concrete
Table 2.2 γs 1.15 steel
3.1.6 (1)P αcc 0.85 strength factor
3.1.6 (1)P αct 1.00 strength factor
9.3.1.1 (3) Smax,slabs, MAIN 400 UD max slab spacing PL250
-=- -=- 3 UD or x h PL 2
9.3.1.1 (3) Smax,slabs, DIST 450 UD max slab spacing PL400
-=- -=- 3.5 UD or x h PL 3
EN 1990 γG,sup 1.35 dead load factor
EN 1990 γQ 1.5 imposed load factor
EN 1990 Allow 6.10a & b? Yes loading equations
EN 1990 ξ 0.925 Gk modification factor
CODE
TABLE A1.1 EN1990 ψ0 ψ1 ψ2 1.5
Dwelling 0.7 0.5 0.3 1.15
Office 0.7 0.5 0.3 1
Crowds 0.7 0.7 0.6 a
Shopping 0.7 0.7 0.6 0.44
Storage 1 0.9 0.8 1.25
Traffic<=30kN 0.7 0.7 0.6 0.6 0.4
Traffic, 30 to 160kN 0.7 0.5 0.3 0.0014 0.4
Roofs 0 0 0 0.54 0.3
Snow 0.5 0.2 0 0.44
1.25 0
TABLE 7.4N 0.6 1
0 0 0.7 1.3
1 1 0.8 1.5
2 1.3 0.18 1.2
3 1.5 0.035
4 1.2 1 2.5
5 0.4 1
0.8
Max 310/σs 1.5 400 250
3 2
450 400
3.5 3
1.35
1
1.5
Yes
0.85
Loading equation selection
UK
1.5 Gk 6.50 ψ0 = 0.7
1.15 Qk 5.00
0.85 6.10a 14.025
b 6.10b 15.617 Dead 1.2488 b
0.4 Checks 0 Imposed 1.5 a
1 BS EN 1990: (6.10b)
0.6 ?
0.0014 ?
0.4 ?
0.4
1 0
0.6 1
? 1.3
? 1.5
0.18 1.2
0.035
1 2.5
1
1
400 250
3 2
450 400
3.5 3
1.35
1
1.5
Yes
0.925
Disclaimer
All advice or information from the British Cement Association and/or The Concrete Centre is intended fo
those who will evaluate the significance and limitations of its contents and take responsibility for its use an
application. No liability (including that for negligence) for any loss resulting from such advice or informatio
is accepted by the BCA, TCC or their subcontractors, suppliers or advisors. Users should note that all TC
software and publications are subject to revision from time to time and should therefore ensure that they ar
in possession of the latest version.
This spreadsheet should be used in compliance with the accompanying publication 'User Guide R
Spreadsheets: v3' available from The Concrete Bookshop, www.concretebookshop.com, Tel +44 (0)700
607777 or +44 (0)1276 607140
Status of spreadsheet
First public release