Professional Documents
Culture Documents
Naming Convention
Part Files
NOTE: Every part ( .prt ) goes into an assembly ( .asm ) with the same name.
3. If a part file contains family table instances for specific part numbers, the generic
part should be named with the -0000 suffix:
{ 49-011937-0000.prt
NOTE: The family table instances must match the Diebold part naming
convention.
4. If a part file is used to support a purchased assembly (such as a slide), the first
twelve digits must match the Diebold part number followed by a unique
description:
{ 49-011937-000A-INNR.prt
{ 49-011937-000A-OUTR.prt
http://doc6.diebold.com/opemmancad/naming/part.html 9/22/2004
DIEBOLD - Pro/ENGINEER Help - Part Files Página 2 de 3
49-123456-000A_25L40W
49-123456-000A_25L50W where "_OPEN", "_25L40W", "_25L50W"
identify the instance.
You define the instance names in the family table. Widen the column, if
necessary, to see the full length name.
* Note: For the Tape Bulk item, PART_TYPE needs to be set to INSTBULK.
http://doc6.diebold.com/opemmancad/naming/part.html 9/22/2004
DIEBOLD - Pro/ENGINEER Help - Part Files Página 3 de 3
Main Index
February 18, 2002
http://doc6.diebold.com/opemmancad/naming/part.html 9/22/2004