You are on page 1of 3

LARSEN & TOUBRO LIMITED-ECC

RAJASTHAN ATOMIC POWER PROJECT - 7 & 8

CONSTRUCTION OF NDCT,CWPH & ALLIED WORKS

MIX DESIGN CALCULATION

Date/Time: 10.10.2022 Mix Idetification: N15/A20/F40

Mix Requirements Mix Input Data

Grade N15 Material Specific Gravity Source

Slump (mm) 150 ± 25 Cement 3.15 OPC 43 GRADE ULTRATECH CEMENT

Exposure Type Moderate Coarse Agg. 2.62 GIL STOCK YARD

Max. Size of Agg. (mm) 20 Natural Sand 2.71 GIL STOCK YARD

Standard Deviation (N/mm 2) 5 MS-1 2.59 GIL STOCK YARD

Admixture Type Super Plasticizer MS-2 2.59 GIL STOCK YARD

Cement Type Ultratech Admixture 1.215 BASF RHEOBUILD 1122 RP

Mineral Admixture Type Fly Ash Mineral Admix. 2.22 FLY ASH, RRVUNL KSTPS UNIT, KOTA

1. Target Mean Strength (MPa) 20.75 4. Adopted W/C 0.53

2. Max W/C ratio as per exposure 0.6 5. Water Content (Kg) 159

3. Cement Content 180 6. Binder content (Kg) 300


7. Quantity of Admixture
4. Fly Ash Content 120 3.60 1.20
(Kg)

MIX CALCULATIONS

(a) Volume of the expected air 0.02 Cum

(b) Volume of the solid concrete = (1 - a) 0.98 Cum

(c) Volume of cement = Wt. of cement / Sp. Gr. of cement 0.057 Cum

(d) Volume of water = Wt. of water / Sp. Gr. of water 0.159 Cum

(e) Volume of the admix. = Wt. of admix. / Sp. Gr. Of admix. 0.003 Cum

(f) Volume of the mineral admix. = Wt. of mineral admix. / Sp. Gr. Of mineral admix. 0.054 Cum

(g) Volume of total aggregates = {b - (c + d + e + f)} 0.707 Cum

(h) Volume of Fine Aggregate = (g x % of fine aggregate) 48 0.339 Cum

(h1)Volume of MS-1 =(h * % of MS-1) 0 0.000 Cum

(h2)Volume of MS-2 =(h * % of MS-2) 40 0.136 Cum

(h3)Volume of Natural Sand=(h * %of Natural Sand) 60 0.204 Cum

(h4)Weight of MS-1 2600 0 Kgs

(h5)Weight of MS-2 2590 351 Kgs

(h6)Weight of Natural Sand 2710 552 Kgs

(k) Volume of Coarse Aggregate= (g - h) 52 0.368 Cum

(l) Weight of Coarse Aggregate= (k x Sp. Gr. of Coarse


2620 963 Kgs
Aggregate *1000)

(m) Weight of 20mm Aggregate= (i*%of 20mmaggregate) 70 674 Kgs

(n) Weight of 10mm Aggregate= (i*%of 10mm aggregate) 30 289 Kgs

(o)Theorotical Density of Concrete Mix 2325 Kgs

Remarks :

Tested & Checked by: L&T -QC Witness / Reviewed by NPCIL

Sign & Date :


Name & Design :
LARSEN & TOUBRO LIMITED-ECC
RAJASTHAN ATOMIC POWER PROJECT - 7 & 8
CONSTRUCTION OF NDCT,CWPH & ALLIED WORKS-7&8
BATCH SIZE & MOISTURE CONTENT ADJUSTMENT FORM AT BATCHING PLANT-BP-01 & 02

Date 10/10/2022 Time: 11:30 Ref. No.


Concrete Grade N15/20/C-156/F-104 Formula No. Sheet 1 of 1

Mix for 1 m3in SSD condition (Kg/m3) Cement/Admixture MC/Normat

Coarse Aggregate Fine Aggregate


Cement Fly Ash Water Admixture
40mm 20mm 10mm N. Sand M.Sand

180 120 0 704.00 302.00 576.000 367.00 159.00 3.600

Mix for 1 m3in SSD condition (Kg/m3)

Coarse Aggregate Fine Aggregate


Cement Fly Ash Water Admixture
40mm 20mm 10mm N. Sand M.Sand

180.00 120.00 0.00 704 302 576 367 159.00 3.600

Water Absorption (%) A 1.05 1.05 1.51 2.11

Moisture Content (%) B 1.01 2.50 7.25 7.00

Moisture Adjustment (%)


-0.04 1.45 5.74 4.89
C=B-A
Increase/ Decrease due to
-0.28 4.38 33.06 17.95 -55.11 0
Moisture
Corrected batch Quantity
180 120.00 0.00 704 306 609 385 104 3.600
(Kg)

L&T QC L&T QA/QC NPCIL


Signature:-

Name :-

Date :-

# Sensitivity : This Document is Classified as "LNT Internal Use".

You might also like