Professional Documents
Culture Documents
Specification service:
Specification For all architectural hardware specification
Service assistance refer to your local ASSA ABLOY
sales office.
A fully comprehensive, obligation free,
architectural door hardware specification
can be prepared by architectural hardware
representatives.
Disclaimer:
Whilst every effort has been made to ensure that
the information contained in this catalogue is
accurate at the time of publication, ASSA ABLOY
recommends that you consult ASSA ABLOY or
its agents prior to placing an order to ascertain
current information on specific products, as
ASSA ABLOY reserves the right to make changes
without notice. ASSA ABLOY will not be liable
for any injury, loss or damage whatsoever, arising
from any errors or omissions in the information
contained in the catalogue or arising from the use
or application of the information contained herein.
This catalogue does not constitute an offer for the
sale of any particular product.
DHF (Door and Hardware Federation)
Graphic icons
Hinges 06
Contents
Lever Handles 16
Mortise Lockcases 26
Euro Profile Cylinders 55
Cylindrical Locksets 37
Panic Exit Devices 41
Door Closers 99
Floor Springs 100
Patch Fittings 142
Pull Handles 155
Shower Hardware 162
General Hardware 186
Wireless Access Control Escutcheon 199
Electromagnetic Locking 206
Hinges
Technical details:
Manufactured from high grade stainless steel
Easily seated pin that will not rise during normal
use
Available hinges -
1. Ball Bearing hinge
2. Lift Off hinge
3. Concealed hinge
Width
Axis of Hinge
Knuckles x 5
Template drilled countersunk
holes
Ball Bearing x 2
Spindle inside
7
Door Hinges
Note:
For each additional 762mm (30”) add one hinge.
8
Door Hinges - Fire Rated
9
Door Hinges - Special Application
11
Door Hinges - Concealed
Door weight ≤40 kg/2pc, door width ≤ 900mm, Door thickness ≥ 35mm
Instructions and
Installation
Templates
1. Install hinge on the door leaf, 2. Install hinge on the door 3. Stick the self-adhesive
with adjusting hole B always frame. cover plates on the hinge after
up, hinge part A on door leaf & completion of adjustment.
hinge part C on the door frame.
Hinge Adjustment
1. Install hinge on the door leaf, 2. Install hinge on the door 3. Stick the self-adhesive
with adjusting hole B always frame. cover plates on the hinge after
up, hinge part A on door leaf & completion of adjustment.
hinge part C on the door frame.
Hinge Adjustment
13
Door Hinges - Concealed
1. Install hinge on the door leaf, 2. Install hinge on the door 3. Fix cover plates on the hinge
with hinge part stamping frame. with screws after completion of
marked with ”Door” on door adjustment.
leaf.
Hinge Adjustment
14
Door Hinges - Concealed
1. Install hinge on the door leaf, 2. Install hinge on the door 3. Fix cover plates on the hinge
with hinge part stamping market frame. with screws after completion
with ”Door” on door leaf. of adjustment.
Hinge Adjustment
Technical details:
Door thickness required - 30mm-50mm
• Spindle - 8mm x 8mm
Suitable for hinged timber, metal doors
• All lever handles come complete with two euro
cylinder escutcheons
• Roses are designed to fit back to back and fixing
is concealed by the use of a slip on outer rose
Finish - US32D
17
Lever Handles - Solid Series
65
Finish: Satin Stainless Steel - US32D
130
130
18
Lever Handles - Solid Series
55
127
128
19
Lever Handles - Solid Series
45.6
132
132
120
20
Lever Handles - Tubular Series
60
50
140
135
135
21
Lever Handles - Tubular Series
60
135
139
135
22
Lever Handles - Tubular Series
60
Finish: Satin Stainless Steel - US32D
135
16
60
135
140
23
Lever Handles - Tubular Series
19
19
137
137
54
54
24
ASSA ABLOY Narrow Profile
Accessories
69
Finish: Satin Stainless Steel - US32D
135
31
135
31
135
31
Model no.: AEP - 050 32 10
Narrow Profile
Lever Handle Description: Narrow profile escutcheons
PC
25
Mortise Lockcases
Technical details:
Center to center - 72mm
• Backset - 55mm or 60mm
Door thickness requried - 35mm to 50mm with
the standard screw fixing pack provided
• Fits standard cam euro profile cylinder
Single throw projection deadbolt - 20mm
Suitable for hinged timber, metal and fire doors
All mortise lockcases contain suitable strike plates
and screws
Optional rebate kit available
27
Mortise Lockcase - AA5100 Series
8 Locking functions:
Mortise Lockcase • Passage Latch
AA5100 Series • Entrance Lockcase
• Deadlock Lockcase
• Classroom Lockcase
• Privacy Lockcase
• Nightlatch Lockcase
• Roller bolt entrance Lockcase
• Panic exit entrance Lockcase
Dimensions:
Various locking
functions for
A B C D E F G
multiple
applications
60mm 89mm 72mm 30mm 165mm 38mm 31mm
H I J K L M N
Limiting dimensions:
2 1
G
6
N
K
E
C
3 F
I
J
D
L
A
B
Parts:
1. Lock case
2. Latch bolt
3. Deadbolt
4. Euro cylinder hole
5. Face plate
6. Lever follower
7. Counter sunk holes
28
Mortise Lockcase - AA5100 Series
40
Model no.: AA5101 24
Mortise Lockcase
15
AA5100 Series Description: AA5101 ASSA ABLOY Euro mortise lockcase
38
66
Door thickness: 35mm to 50mm
Passage Latch
170
Finish: SSS - Satin Stainless Steel
Outside: Opened by handle at all times
Inside: Opened by handle at all times
40
Model no.: AA5103 24
Mortise Lockcase
AA5100 Series Description: AA5103 ASSA ABLOY Euro mortise lockcase 15
66
Door thickness: 35mm to 50mm
38
Entrance Lockcase
170
34.4
Finish: SSS - Satin Stainless Steel
Outside: Opened by handle when unlocked.
50
40
24
Model no: AA5104
Mortise Lockcase
AA5100 Series Description: AA5104 ASSA ABLOY Euro mortise lockcase
66
10.7
Finish: SSS - Satin Stainless Steel
Outside: Bolt is locked or unlocked by key or turn
50
3
29
Mortise Lockcase - AA5100 Series
118
90
38
Finish: SSS - Satin Stainless Steel
Outside: Opened by handle except when handle is made
inoperative by key from outside. Key locks or unlocks
outside handle.
Inside: Opened by handle at all times.
40
Model no.: AA5109 24
Mortise Lock
AA5100 Series Description: AA5109 ASSA ABLOY Euro mortise lockcase 15
Door thickness: 35mm to 50mm 66
38
Privacy Lockcase
Finish: SSS - Satin Stainless Steel
170
40
24
Model no.: AA5106
Mortise Lock
15
AA5100 Series Description: AA5106 ASSA ABLOY Euro mortise lockcase
66
38
30
Mortise Lockcase - AA5100 Series
66
23
32
Roller Bolt Entrance
Lockcase
37
Finish: SSS - Satin Stainless Steel
170
10.5
Outside: Bolt is locked or unlocked by key or turn.
Inside: Bolt is locked or unlocked by key or turn.
50
*Roller bolt can always open the door from inside and
outside when door is unlocked, roller bolt is not operated
by handle.
39
24
Model no.: AA510P
Mortise Lock
14
AA5100 Series Description: AA510P ASSA ABLOY Euro mortise lockcase
59
43
Door thickness: 35mm to 50mm
Panic Exit Entrance
172
44
Lockcase Finish: SSS - Satin Stainless Steel
Outside: Outside handle is made inoperative by key or
40.5
31
Mortise Lockcase - AA5100 Series
Mortise Lock
24
10
28
2. 8
21
AA5100 Series
2-
46
R4
Description: AA5104 55-F ASSA ABLOY Small euro
16.7
15 12 12
8
4-
-0.5
31
0
Small Body Mortise
46
86
+0.10
138.5
8.1 - 0.05
58
20
35
68
88
Door thickness: 35mm to 50mm
Lockcase - Deadbolt
21.5
Finish: SSS - Satin Stainless Steel 2-
2- 5.2
8×90˚
38
10
2- 5.5
15
84 24
55
24
10
Mortise Lock
28
21
2. 8
49
14.5
20
AA5100 Series
9×90˚ 10 8 9
10.5
-0.5
50.5
0
95
17.4
48
68
88
Lockcase - Latch
22
10.4
38
10
3- 9.5×90˚
Function Code
Code example • Passage Latch - 1
Regular Mortise • Entrance Lockcase - 3
AA5100 Series AA5103 6072
• Deadlock Lockcase - 4
CTC: 72mm
• Classroom Lockcase - 5
Backset: 60mm • Privacy Lockcase - 9
• Nightlatch Lockcase - 6
• Roller bolt entrance Lockcase - R
• Panic exit entrance Lockcase - P
For all models, add -F to the code for fire-
rated lockcases. Example: AA5103 6072-F
32
ASSA ABLOY Narrow Profile
Mortise Lockcase
Features & Benefits
Key features: Benefits:
Narrow Profile Made of SS 304 High corrosion resistance
Mortise Lockcase 4 different functions • High durability
AA5100 Series • 4 Backset options Versatile usage
Non-handed - latch reversible
• Compliant to BS EN 12209
Technical details:
Center to center - 85mm
• Backset - 20mm, 25mm, 30mm, 35mm
Door thickness requried - 35mm to 50mm with
the standard screw fixing pack provided
• Fits standard cam euro profile cylinder
Single throw projection deadbolt - 15mm
Suitable for hinged aluminium and metal doors
All mortise lockcases contain suitable strike plates
and screws
The range of ASSA ABLOY mortise lockcases
consists of various functions to meet the most
enhanced security and locking requirements.
33
ASSA ABLOY Narrow Profile
Mortise Lockcase - AA5100 Series
34
ASSA ABLOY Narrow Profile
Mortise Lockcase - AA5100 Series
Code example
Narrow Profile
Mortise Lockcase AA5103 2085
CTC: 85mm
AA5100 Series
Backset: 20mm, 25mm, 30mm or 35mm
Function Code
• Passage Latch - 1
• Entrance Lockcase - 3
• Deadlock Lockcase - 4
• Roller bolt entrance Lockcase - R
35
Sliding Door Lockcase
36
Euro Profile Cylinders
Technical details:
Satin Nickel finish
Suitable door thickness up to 120mm
• Each euro profile cylinder supplied with 3 keys
Cylinders available in -
1. Cylinder and turn
2. Double cylinder
3. Single cylinder
4. Privacy cylinder
38
Cylinders - Euro Profile
39
Cylinders - Euro Profile
Level 2
Master Key
AA AB AC
Level 3
Change Key
40
Panic Exit Devices
Technical details:
Standard & • Rim type push bar
Certification • Half length, 1045mm as standard
• 304 stainless steel material
UL 10C and ANSI • For doors up to 1200 x 2400mm in standard
A156.3 Grade 1 • Easy installation and adjustment
• Stainless steel or galvanized steel finish
• Compatible accessories
• Standard euro profile cylinder
• UL listed for fire exit hardware up to 3 hours
Suitable for single leaf and double leaf doors
With satin chrome external lever trim
42
Panic Exit Device - AAED400 Series
154
50
23.5
29
120
F
1045
57
154
50
110mm
Code example
How to Order
AAED401P
Finish Code
SS - Stainless Steel
P - Painted
Locking Code
1 = Single-point locking
2 = Double-point locking
For 3000mm door height, please order AAED402P - 3000
or AAED402SS - 3000
43
ASSA ABLOY Panic Exit Device
Features & Benefits
Technical details:
• Rim type push bar
• Full length, 1045mm as standard
• 304 stainless steel material
• For doors up to 1200 x 2400mm in standard
• Easy installation and adjustment
• Stainless steel or galvanized steel finish
• Compatible accessories
• Standard euro profile cylinder
Suitable for single leaf and double leaf doors
With satin chrome external lever trim
44
Panic Exit Device - AAED500 Series
154
50
28.5
26.5 41
29
120
1046 57
26.5
154
50
Code example
How to Order
AAED501P 2400
Door height
Finish Code
2400 - 2400mm
S - Stainless Steel
3000 - 3000mm
P - Painted
Locking Code
1 = Single-point locking
2 = Double-point locking
45
Door Closers
<750 20kg 1
850 40kg 2
950 60kg 3
1100 80kg 4
1250 100kg 5
1400 120kg 6
1600 160kg 7
*All dimensions are in mm
47
ASSA ABLOY Door Closers
Cam-motion® for optimum convenience
in opening doors
Cam-motion® Technology:
Cam-motion® for ASSA ABLOY Cam-motion® technology enables
optimum guide rail door closers to comply with CEN TR 15894
convenience in requirements.
opening doors
Safe in an emergency:
You’ll be on the safe side with ASSA ABLOY since
our door closers meet national and international
provisions and regulations. Smoke protection
and fire doors may only be fitted with door closer
systems complying with EN1154/EN1155/EN1158.
ASSA ABLOY supplies approved door closer
systems for single and double leaf smoke and fire
doors with different usage requirements.
Rapidly decreasing
torque in a
Cam Motion®
Door Closer from
ASSA ABLOY
48
ASSA ABLOY Door Closers
use state-of-the-art technology
Door Closer - Overview of functions
Fire
Max. door Door
Closing Latching Back- Delayed doors Dimension
Models Type Sizes width swing
speed speed check action (CE/ L x D x H (mm)
(mm) directions
UL)
Variable Variable
Rack and Non-
DC110 EN3 950 between between - - 182 x 60 x 41
Pinion handed
180˚-15˚ 15˚-0˚
Variable Variable
Rack and Non-
DC115 2/3/4 850-1100 between between - - UL 183 x 67 x 44.5
Pinion handed
180˚-15˚ 15˚-0˚
Variable Variable
Rack and Non-
DC116 2/3/4 850-1100 between between Optional - UL 179 x 41. x 42
Pinion handed
180˚-15˚ 15˚-0˚
Variable Variable Variable
Rack and Non-
DC120 EN2/3/4 850-1100 between between above - 220 x 47 x 52
Pinion handed
180˚-15˚ 15˚-0˚ 75˚
Variable Variable Variable
Rack and Non-
DC125 4, fixed 1100 between between above - UL 223 x 67 x 45
Pinion handed
180˚-15˚ 15˚-0˚ 75˚
Variable Variable Variable
Rack and EN3, Non-
DC135 950 between between above - CE 233 x 43 x 60
Pinion fixed handed
180˚-15˚ 15˚-0˚ 75˚
Variable Variable Variable
Rack and Non-
DC200 EN2-4 850-1100 between between above - CE 233 x 43 x 60
Pinion handed
180˚-15˚ 15˚-0˚ 75˚
Variable Variable Variable
Surface Non-
DC300 EN3-6 950-1400 between between above O CE 260 x 47 x 60
Mounted handed
180˚-15˚ 15˚-0˚ 75˚
Variable Variable Variable
Surface Non-
DC500 EN1-4 750 -1100 between between above - CE 270 x 57 x 64
Mounted handed
170˚-15˚ 15˚-0˚ 75˚
Variable Variable
Surface Non-
DC700 EN3-6 950 -1400 between between O CE 215 x 32 x 54
Mounted handed
170˚-15˚ 15˚-0˚
Variable Variable Variable
Non-
DC703 Concealed EN3 950 between between above - CE 215 x 32 x 54
handed
120˚-15˚ 15˚-0˚ 75˚
Variable Variable Variable
EN3, & Non-
DC800 Concealed 950 -1100 between between above - - 200 x 32 x 54
EN4 handed
115˚-15˚ 15˚-0˚ 75˚
Variable Variable Variable
Non-
DC901 Concealed EN2-4 850 -1100 between between above - - 236 x 36 x 59
handed
120˚-15˚ 15˚-0˚ 75˚
Variable Variable Variable
Non-
DC860 Concealed EN1-5 750 -1250 between between above - CE 290 x 40 x 54
handed
120˚-7˚ 7˚-0˚ 75˚
Variable Variable
DC280 Surface Non-
EN2-5 750 -1250 between between - - - 236 x 38.5 x 60
SRHO Mounted handed
180˚-15˚ 15˚-0˚
49
Door Closer - Surface Mounted
DC110
Characteristics of DC110:
Can be used for left and right-handed doors
• Suitable for fire and smoke protection doors
Pass
• Closing and latching speed adjustable via
regulating valves
• Thermodynamic valves for consistent
performance
Standard colour: Silver
Required space on
doors:
Left handed shown in
diagram,
Right handed is the
reverse.
51
Door Closer - Surface Mounted
DC115
Characteristics of DC115:
Can be used for left and right-handed doors
• Suitable for fire and smoke protection doors
• Closing and latching speed adjustable via
regulating valves
• Thermodynamic valves for consistent
performance
• Standard colour: Silver
67
44.5
77.5
19
165
183
Characteristics of DC116:
Can be used for left and right-handed doors
• Maximum door opening angle 115˚
• Closing and latching speed adjustable via
regulating valves
• Thermodynamic valves for consistent
performance
• Optional back-check unit
• Optional hold-open unit
• Standard colour: Silver
F
58
16
41.7
179
Technical details:
Door Closer
Closing force 2/3/4 template adjustable
Technical details Door width up to 1100mm
for DC116 Fire and smoke protection Yes
Door swing directions Non-handed
Closing speed Variable between 115°-15°
Latching speed Variable between 15°-0°
Backcheck Optional
Height 42mm
Depth 41.7mm
Length 179mm
In compliance with EN1154
Characteristics of DC120:
Can be used for left and right-handed doors
• Suitable for fire and smoke protection doors
• Closing speed, latching speed and back-check
continuously adjustable using regulating valves
• Thermodynamic valves for consistent performance
• Closing force configurable
• Opening angle up to 180°
(105° in mounting position size EN4)
Standard colour: Silver F
55
Door Closer - Surface Mounted
DC125
Characteristics of DC125:
Can be used for left and right-handed doors
• Suitable for fire and smoke protection doors
• Closing speed, latching speed adjustable using
regulating valves
• Thermodynamic valves for consistent performance
• Standard colour: Silver
67
76
45
19
206
223
Characteristics of DC135:
Can be used for left and right-handed doors
• Opening angle up to 180˚
• Closing speed, latching speed and back-check Pass
Required space on
Door Closer doors:
Left handed shown in
Specifications for diagram,
DC135 Right handed is the
reverse.
Installation dimensions
for direct standard
mounting on hinge side:
Left handed shown in
diagram,
Right handed is the
reverse.
Installation dimensions
for direct standard
mounting on hinge side:
Left handed shown in
diagram,
Right handed is the
reverse.
Installation dimensions
when mounted directly
on to the frame non-
hinge side:
Left handed shown in
diagram,
Right handed is the
reverse.
Installation dimensions
with mounting plate for
frame mounting non-
hinge side:
Left handed shown in
diagram,
Right handed is the
reverse.
58
DC135
Accessories and
order placement
information for
DC135
59
Door Closer - Surface Mounted
DC200
Characteristics of DC200:
• Can be used with integrated concealed mounting
plate, suitable for fire and smoke protection
doors
• Can be used for left and right-handed doors
Link arm height-adjustable up to 14mm
• Closing speed, latching speed and back-check
adjustable via front facing regulating valves
Thermodynamic valves for consistent
performance F
Adjustable closing force
• Opening angle up to 180°
Effective back-check and latching speed range
adjustable
• Large range of applications
• Standard colour: Silver
• Customized finishes available on request
Required space on
Door Closer doors:
Left handed shown in
Dimensional drawings diagram,
for DC200 Right handed is the
reverse.
Installation dimensions
for direct mounting:
Left handed shown in
diagram,
Right handed is the
reverse.
Installation dimensions
with mounting plate:
In compliance with
EN1154, Supplement
1, or for doors where
direct mounting is not
possible. Left handed
shown in diagram,
Right handed is the
reverse.
Frame mounting:
Closer on non-hinge
side of door frame.
Right handed door
shown in diagram.
Left handed door is the
reverse.
Installation dimensions
with mounting plate for
frame mounting:
Closer on non-hinge side
of door frame. For doors
where direct mounting is
not possible.
Right handed door shown
in diagram. Left handed
door is the reverse.
61
DC200
62
Door Closer - Surface Mounted
DC300
Characteristics of DC300:
• Can be used with integrated concealed mounting
plate, suitable for fire and smoke protection
doors
• Can be used for left and right-handed doors
Link arm height-adjustable up to 14mm
• Closing speed, latching speed and back-check
adjustable via front facing regulating valves
Thermodynamic valves for consistent
performance F
Adjustable closing force
• Opening angle up to 180°
Effective back-check and latching speed range
adjustable
• Large range of applications
• Standard colour: Silver
• Customized finishes available on request
Characteristics for hold open link arm L191: Characteristics for special model DC300DA:
• Hold-open angle adjustable up to 150˚ Delayed closing adjustable from front
Hold-open mode can be enabled and disabled as Other features as in Model DC300
required
Same installation as link arm
• Cannot be used with fire and smoke protection
doors
64
DC300
Required space on
Door Closer doors:
Left handed shown in
Dimensional drawings diagram,
for DC300 Right handed is the
reverse.
Installation dimensions
for direct mounting:
Left handed shown in
diagram,
Right handed is the
reverse.
Installation dimensions
with mounting plate:
In compliance with
EN1154, Supplement
1, or for doors where
direct mounting is not
possible. Left handed
shown in diagram,
Right handed is the
reverse.
Frame mounting:
Closer on non-hinge
side of door frame right
handed door shown in
diagram,
Left handed door is the
reverse.
Installation dimensions
with mounting plate for
frame mounting:
Closer on non-hinge side
of door frame. For doors
where direct mounting is
not possible. Right-handed
door shown in diagram.
Left-handed door is the
reverse.
65
DC300
66
Door Closer - Surface Mounted
DC300 Tandem
68
DC300 Tandem
Required space on
Door Closer doors:
Left handed shown in
Dimensional diagram,
drawings for Right handed is the
DC300 Tandem reverse.
Installation dimensions
for direct mounting:
Left handed shown in
diagram,
Right handed is the
reverse.
Installation dimensions
with mounting plate:
In compliance with
EN1154, Supplement
1, or for doors where
direct mounting is not
possible. Left handed
shown in diagram,
Right handed is the
reverse.
69
Door Closer - Surface Mounted
DC500
71
DC500
Space required on
Door Closer doors for standard
installation on hinge
Dimensional drawings side: Left handed shown
for DC500 in diagram,
Right handed is the
reverse.
Installation dimensions
for direct standard
mounting on hinge side:
Left handed shown in
diagram,
Right handed is the
reverse.
Installation dimensions
with mounting plate
for standard mounting
on hinge side: In
compliance with
EN1154, supplement
1, or for doors where
direct mounting is not
possible. Left handed
shown in diagram,
Right handed is the
reverse.
Installation dimensions
for direct frame moun-
ting on hinge side:
Closer on hinge side of
door frame. Left handed
shown in diagram,
Right handed is the
reverse.
Installation dimensions
with mounting plate for
frame mounting on hinge
side:
Closer on hinge side of
door frame. For doors
where direct mounting is
not possible. Left handed
shown in diagram, Right
handed is the reverse.
72
DC500
Installation dimensions
Door Closer for direct standard
mounting non-hinge
Dimensional drawings side: Right-handed door
for DC500 shown in diagram,
Left handed door is the
reverse.
Installation dimensions
with mounting plate
for standard mounting
non-hinge side: For
doors where direct
mounting is not
possible.
Right handed door
shown in diagram, Left
handed door is the
reverse.
Installation dimensions
when mounted directly
on to the frame hinge
side: Closer on non-
hinge side of door
frame. Right handed
door shown in diagram,
Left handed door is the
reverse.
Installation dimensions
with mounting plate for
frame mounting
non-hinge side: Closer
on non-hinge side of
door frame. For doors
where direct mounting
is not possible. Right-
handed door shown in
diagram, Left handed
door is the reverse.
73
DC500
Replacement Plate
A124:
Replacement plate
A124
74
DC500
75
Door Closer - Surface Mounted
DC700
77
DC700
Space required on
Door Closer doors for standard
installation on hinge
Dimensional drawings side: Left handed shown
for DC700 in diagram,
Right handed is the
reverse.
Installation dimensions
for direct standard
mounting on hinge side:
Left handed shown in
diagram,
Right handed is the
reverse.
Installation dimensions
with mounting plate
for standard mounting
on hinge side: In
compliance with EN
1154, supplement 1,
or for doors where
direct mounting is not
possible. Left handed
shown in diagram, Right
handed is the reverse.
Installation dimensions
for direct frame moun-
ting on hinge side:
Closer on hinge side of
door frame. Left handed
shown in diagram,
Right handed is the
reverse.
Installation dimensions
with mounting plate for
frame mounting on hinge
side:
Closer on hinge side of
door frame. For doors
where direct mounting is
not possible. Left handed
shown in diagram, Right
handed is the reverse.
78
DC700
Installation dimensions
Door Closer for direct standard
mounting non-hinge
Dimensional drawings side: Right handed door
for DC700 shown in diagram,
Left handed door is the
reverse.
Installation dimensions
with mounting plate
for standard mounting
non-hinge side:
For doors where
direct mounting is not
possible. Right-handed
door shown in diagram,
Left handed door is the
reverse.
Installation dimensions
when mounted directly
on to the frame hinge
side:
Closer on non-hinge
side of door frame
Right-handed door
shown in diagram,
Left handed door is the
reverse.
Installation dimensions
with mounting plate for
frame mounting non-
hinge side:
Closer on non-hinge
side of door frame.
For doors where
direct mounting is not
possible.
Right-handed door
shown in diagram,
Left handed door is the
reverse.
79
DC700
Replacement Plate
A124:
Replacement Plate
A124
80
DC700
81
Door Closer - Surface Mounted
DC700G-FT
83
DC700G-FT
Space required on
Door Closer doors for standard
mounting on hinge side
Dimensional drawings Left handed shown in
for DC700G-FT diagram,
Right handed is the
reverse.
Installation dimensions
in compliance with
EN 1154 Supplementary
Sheet 1; standard
hinge-side mounting
Left handed shown in
diagram,
Right handed is the
reverse.
Notice:
The positions of the locking components on the
guide rail and mounting plate are designed in such
a way that escape door strikes and latch bolt are
correctly aligned when installed in a flush position
(flush-fitted doors). Adjustment option on electric
strike (FaFix® ) of +/- 1 mm and latch bolt lock
of +6/-3 mm mean that smaller differences in
measurements can be compensated for.
84
DC700G-FT
Replacement Plate
DCFA03: For mounting
guide rail over existing
drill holes from other
manufacturers, for
flush-fit doors and
narrow rebate doors
with door leaf overlap
up to 8mm.
Replacement Plate
DCFA04: For mounting
guide rail over existing
drill holes from other
manufacturers. For
flush-fit doors and
narrow rebate doors
with door leaf overlap
up to 18mm.
85
DC700G-FT
86
Door Closer - Concealed
DC703
Characteristics of DC703:
Single action, with easy installation
(Non-directional body to avoid any
installation and adjustment mistakes)
• Suitable for wooden, metal and narrow profile
aluminium door
• Powder-Coated finish, provide better reliability
and better appearance
• Suitable for interior and external door application
• Optional 90˚ HO
F
• Standard colour: Silver
460
14.5
3
23
68
215
13.5
260 84
32
Required space on
Door Closer doors:
Left handed shown in
Dimensional drawings diagram,
for DC703 Right handed is the
reverse.
Installation dimensions:
Installation dimensions
EN3
88
Door Closer - Concealed
DC800
Characteristics of DC800:
Can be used for left and right-handed doors
• Maximum door opening angle 115˚
• Closing and latching speed adjustable via
regulating valves
• Thermodynamic valves for consistent
performance
• Optional hold-open unit
• Standard colour: Silver
32
3
54
200
Technical details:
Door Closer
Closing force Size 3 (DC803) Size 4 (DC804)
Technical details Door width up to 950mm 1100mm
for DC800 Fire and smoke protection Yes No
Door swing directions Non-handed
Closing speed Variable between 115°-15°
Latching speed Variable between 15°-0°
Backcheck No
Height 54mm
Depth 32mm
Length 200mm
In compliance with EN 1154
Characteristics of DC901:
Optional back-check and delayed action
functions
• Powder-Coated finish, provide better reliability
and better appearance
• Suitable for interior and exterior door application
Power adjustable EN 2-4
• Optional 90˚ HO
• Standard colour: Silver
F
460
3 19
29
59
11
16
236
306
36
Required space on
Door Closer doors:
Left handed shown in
Dimensional drawings diagram,
for DC901 Right handed is the
reverse.
Installation dimensions:
Installation dimensions
EN3
91
Door Closer - Concealed
DC860
Technical details:
Door Closer
Adjustable closing force EN1-5
Technical details Door width up to 1250mm
for DC860 Fire and smoke protection Yes
Door swing directions Left / right handed
Standard and frame installation Yes
Closing speed Variable between 120°-7°
Latching speed Variable between 7°-0°
Opening angle ca. 120º
Height 54mm
Depth 40mm
Length 290 mm
In compliance with EN1154
CE marking for building products Yes
93
DC860
Installation dimensions
Door Closer for direct standard
mounting on hinge side:
Dimensional drawings Right-handed door
for DC860 shown in diagram,
Left handed door is
the reverse.
Right-handed door
shown in diagram,
Left handed door is
the reverse.
Installation dimensions
with 8mm axis
extension:
Right-handed door
shown in diagram,
Left handed door is
the reverse.
94
DC860
95
DC860 with G880
Technical details:
Door Closer
Supply voltage 24 V DC
Technical details Rated current consumption at 24 V ca. 60 mA
for DC860 with G880 Continuous duty 100% ED
Hold-open angle (continuously adjustable) 80° - 120°
Height 30mm
Depth 26mm
Length 493mm
Fire and smoke protection Yes
In compliance with EN1155
CE marking for building products Yes
Facts for door closer Yes, see DC860
97
DC860 with G880
Installation dimensions
Door Closer: for direct standard
mounting on Hinge side:
Dimensional drawings Right-handed door
for DC860 with G880 shown in diagram,
Left handed door is the
reverse.
Installation dimensions
with 4mm axis
extension:
Right-handed door
shown in diagram,
Left handed door is the
reverse.
Installation dimensions
with 8mm axis
extension:
Right-handed door
shown in diagram,
Left handed door is the
reverse.
98
Door Closer - Surface Mounted
DC280 SRHO
460
7 446 29
375
19
60
236 38.5
Technical details:
Standard &
Various power sizes
Certification
• Suitable for wood, glass, metal and fire rated
doors
EN1154
• Available finishes - SSS, PSS and customized
CE Marked
finishes available on request
Functions:
Back-check
Hold-open
• Controlled closing speed
Thermodynamic valves
Independent hydraulic circuit
102
ASSA ABLOY Floor Springs
Features & Benefits
Torque
ensures that the force of a floor spring in
which a user needs to 01 02 03 04 05 06 07 08 09 01 00 1101 20 1301 40 1501 60 170 180
case of temperature
apply to open the door fluctuation.
Angle (Degrees)
Door closer with
Cam Motion® Technology
up to 60° must be
reduced by 40%.
103
ASSA ABLOY Floor Spring
use state-of-the-art technology
Opening
Door
Max. angle Fire Hinge
EN max. Single- Double- Dimension
Models weight of Applications (incl. BC doors distance
Size width action action L x D x H (mm)
door hold- (CE) (mm)
(mm)
open)
Heavy doors,
high traffic 1
DC475 EN3-6 950-1400 <300kg 2
36-42 345 x 78 x 82
doors, 2 1
exterior doors
Recommended
1
DC477 EN2-4 850-1100 <170kg exterior & 54-57 277 x 110 x 70
2
2 1
Interior doors
Recommended 1
DC420 EN3/4 950/1100 <100kg 2
2 - 36-46 306 x 82 x 47
for glass doors 1
Recommended
850/950
DC460 EN2/3/4 <120kg - 48-54 308 x 108 x 40
1
for light-duty 2
/1100 2 1
interior doors
Recommended
DC450 EN3/4 950/1100 <120kg for light-duty 2
2
1
- - 49-54 277 x 108 x 40
1
interior door
Recommended 1
2
AF-220F EN3 950 <120kg for light-duty 2 1 - 49-54 319 x108x 40.5
interior door
Recommended
AF-224P EN2-4 850-1100 <150kg for light-duty 2
2
1
1
- 49-54 319 x 82 x 49.5
interior door
Recommended
1
AF503 Size3 950 <105kg exterior & - - 45-50 274 x 97x 40
2
2 1
Interior doors
Recommended 1
2
DC600 Size3/4 950/1100 <150kg exterior & 2 1 - - 48-56 308 x 108x 40
Interior doors
104
ASSA ABLOY Floor Spring
DC475
Characteristics of DC475:
Closing from 175° in both door swing directions 15˚
2 1
with hydraulic control from 175° 0˚
2 1
175˚
performance
• Adjustable door speed and latching speed
through top regulating valves
Back-check
Cast Iron body
Adjustments in all directions within the cement F
box
Cement box is hot zinc plated
Cover plates and eyelets made in polished or
Satin Satinless Steel and Polished Brass
Interchangeable spindle from 0 to 30mm
Available without hold-open or with hold-open
angle 90° and 105°
Speed adjustment:
1 variable closing speed 175° - 15°
2 variable latching speed 15° - 0°
Technical details:
Floor Spring
Adjustable closing force EN3-6
DC475 Door width up to 1400mm
Door weight up to 300 kg
Max. opening angle 175°
Closing speed Variable between 175°-15°
Latching speed Variable between15°- 0°
Back-check Mechanical
Weight 7.3kg
Height 82mm
Length 345mm
Width 78mm
Body adjustment within cement box Vertical 9mm, side 6mm, front 5mm, angular 2°
DIN-direction Left/Right-handed doors or double action
Hold-open mode 90°/105°/Non hold-open
In compliance with EN1154
CE Marking for building products Yes
Fire and smoke protection Yes
Floor Spring
Dimensional
drawings for DC475
107
DC475
AC269
Floor Spring
Available in Satin
Accessories for Satinless Steel, Polished
DC475 Satinless Steel and
Polished Brass.
AC115
Reversible bottom
arm in steel for double
action doors, socket for
Italian squared spindle.
AC393
Reversible bottom
arm in steel for double
action doors, socket for
German rectangular
spindle.
AC8
Double action top pivot
AC375
Double action top pivot
in full steel with self
lubricating bushing
108
DC475
AC583
Floor Spring
Right and left bottom
Accessories for arm in steel for single
DC475 -action doors, 36mm
offset. Socket for Italian
squared spindle, Silver
or Black painted.
AC392
Right and left bottom
arm in steel for single
action doors, 36 mm
offset, socket for
German rectangular
spindle, Silver and Black
painted ABS covers.
AC384
Right and left top arm in
full steel, 36mm offset
with Silver or Black
painted ABS cover.
AC612
Sealing compound for
floor springs
109
DC475
Detachable spindles
Floor Spring Italian spindle - square
shape (left image)
Accessories and German spindle - flat-
order placement conical shape
information for AC340 AC341 AC342 AC343 AC344 AC345 AC346 IT (right image)
DC475 AC360 AC361 AC362 AC363 AC364 AC365 AC366 GE
Colour:
Polished Satinless Steel
Satin Satinless Steel
Polished Brass
110
ASSA ABLOY Floor Spring
DC477
Characteristics of DC477:
From 175° in both door swing directions with
hydraulic control from 150°
Two thermodynamic valves for consistent
performance
Adjustable door speed and latching speed
through top regulating valves
Back-check
Cast Iron body
Adjustments in all directions within the cement F
box
Cement box is hot zinc plated
Cover plates and eyelets made in polished or
Satin Satinless Steel and Polished Brass
• Interchangeable spindle from 0 to 30mm
• Available without hold-open or with hold-open
angle 90°, 105°
Technical details:
Floor Spring
Adjustable closing force EN2-4
DC477 Door width up to 1100mm
Door weight up to 170kg
Max. opening angle 175° (Max. 150° in case of no hold-open)
Closing speed Variable between 150°-15°
Latching speed Variable between15°- 0°
Back-check Mechanical
Weight 5.4kg
Height 70mm
Length 277mm
Width 110mm
Body adjustment within cement box Vertical 9mm, side 4mm, front 10mm, angular 4°
DIN-direction Left/Right handed double-action doors
Hold-open mode 90°/105°/Non hold-open
In compliance with EN1154
CE marking for building products Yes
Fire and smoke protection Yes
Dimensional
drawings for DC477
113
DC477
AC534
Floor Spring
Available in Satin
Satinless Steel, Polished
Accessories for
DC477 Satinless Steel and
Polished Brass.
AC115
Reversible bottom
arm in steel for double
action doors, socket for
Italian squared spindle.
AC393
Reversible bottom
arm in steel for double
action doors, socket for
German rectangular
spindle.
AC8
Double action top pivot
AC375
Double-action top pivot
in full steel with self-
lubricating bushing
114
DC477
AC583
Floor Spring
Right and left bottom
arm in steel for single
Accessories for DC477
action doors, 36mm
offset, socket for Italian
square spindle, Silver
or Black painted ABS
covers.
AC392
Right and left bottom
arm in steel for single
action doors, 36 mm
offset, socket for
German rectangular
spindle, Silver and Black
painted ABS covers.
AC384
Right and left top arm
in full steel, 36mm
offset, Silver or Black
painted ABS cover.
AC612
Sealing compound for
floor springs
115
DC477
Detachable spindles:
Floor Spring Italian spindle - square
shape (left image)
Accessories and German spindle - flat-
order placement conical shape
information for AC340 AC341 AC342 AC343 AC344 AC345 AC346 IT (right image)
DC477 AC360 AC361 AC362 AC363 AC364 AC365 AC366 GE
116
ASSA ABLOY Floor Spring
DC420
Characteristics of DC420:
Same dimensions for two bodies according to fix
size EN3/EN4
Hydraulic control over 175° in both door swing
directions
Adjustable door speed and latching speed from
top regulating valves
Cast Iron body
• Adjustments in all directions within the cement
box
Cement box hot zinc plated
• Cover plates and eyelets made in Polished or
Satin Satinless Steel
• Interchangeable spindle from 0 to 30mm F
• Available without hold-open or with hold-open
angle 90°, 105°
Technical details:
Floor Spring
Fix closing force EN3/EN4
DC420 Door width up to 950mm/1100mm
Door weight up to 100kg
Max. opening angle 175°
Closing speed Variable between 175°-15°
Latching speed Variable between15°- 0°
Back-check No
Weight 3.9kg
Height 47mm
Length 306mm
Width 82mm
Body adjustment within cement box Vertical 5mm, side 10mm, front 10mm, angular 6°
DIN-direction Left/Right handed double-action doors
Hold-open mode 90°/105°/Non hold-open
In compliance with EN1154
CE marking for building products Yes
Fire and smoke protection Yes
Dimensional
drawings for DC420
119
DC420
AC307
Floor Spring
Available in Satin
Satinless Steel, Polished
Accessories for
DC420 Satinless Steel and
Polished Brass.
AC115
Reversible bottom
arm in steel for double
action doors, socket for
Italian squared spindle.
AC393
Reversible bottom
arm in steel for double
action doors, socket for
German rectangular
spindle.
AC8
Double action top pivot
AC375
Double action top pivot
in full steel with self-
lubricating bushing.
120
DC420
AC583
Floor Spring
Right and left bottom
arm in steel for single
Accessories for
DC420 action doors, 36mm
offset, socket for Italian
squared spindle, Silver
or Black painted.
AC392
Right and left bottom
arm in steel for single
action doors, 36 mm
offset, socket for
German rectangular
spindle, Silver and Black
painted ABS covers.
AC384
Right and left top arm
in full steel, 36mm
offset, Silver or Black
painted ABS cover.
AC612
Sealing compound for
floor springs.
121
DC420
Detachable spindles:
Floor Spring Italian spindle - square
shape (left image)
Accessories and German spindle - flat-
order placement conical shape
information for AC340 AC341 AC342 AC343 AC344 AC345 AC346 IT (right image)
DC420 AC360 AC361 AC362 AC363 AC364 AC365 AC366 GE
Colour:
Polished Stainless Steel
Satin Stainless Steel
Polished Brass
122
ASSA ABLOY Floor Spring
DC460
Characteristics of DC460:
Same dimensions for three bodies according
to fix size EN2/EN3/EN4
Hydraulic control over 130° in both door swing
directions
Adjustable closing speed and latching speed
through top regulating valves
Cast Iron body
• Adjustments in all directions within the cement
box
Cement box is painted black and only 40mm high
cement box
• Cover plates and eyelets are made in Polished or
Satin Satinless Steel F
• Interchangeable spindle from 0 to 30mm
• Available without hold-open or with hold-open
angle 90°, 105°
Technical details:
Floor Spring
Fix closing force EN2/EN3/EN4
DC460 Door width up to 850mm/950mm/1100mm
Door weight up to 120kg
Max. opening angle 130°
Closing speed Variable between 130°-15°
Latching speed Variable between15°- 0°
Back-check No
Weight 5kg
Height 40mm
Length 308mm
Width 108mm
Body adjustment within cement box Vertical 4mm, side 6mm, front 8mm, angular 2°
DIN-direction Left/Right handed double-action doors
Hold-open mode 90°/105°/Non hold-open
In compliance with EN1154
CE marking for building products Yes
Fire and smoke protection Yes
Floor Spring
Dimensional
drawings for DC460
125
DC460
AC616
Floor Spring
Available in Satin
Satinless Steel, Polished
Accessories for
DC460 Satinless Steel and
Polished Brass.
AC115
Reversible bottom arm
in steel for double-
action doors, socket for
Italian squared spindle.
AC393
Reversible bottom arm
in steel for double-
action doors, socket for
German rectangular
spindle.
AC8
Double action top pivot
AC375
Double action top pivot
in full steel with self-
lubricating bushing
126
DC460
AC583
Floor Spring
Right and left bottom
arm in steel for single
Accessories for
DC460 action doors, 36mm
offset, socket for Italian
square spindle. Silver or
Black painted.
AC392
Right and left bottom
arm in steel for single
action doors, 36 mm
offset, socket for
German rectangular
spindle. Silver and Black
painted ABS covers.
AC384
Right and left top arm
in full steel, 36mm
offset, Silver or Black
painted ABS cover.
AC612
Sealing compound for
floor springs
127
DC460
Detachable spindles
Floor Spring Italian spindle - square
shape (left image)
Accessories and German spindle - flat-
order placement conical shape
information for AC340 AC341 AC342 AC343 AC344 AC345 AC346 IT (right image)
DC460 AC360 AC361 AC362 AC363 AC364 AC365 AC366 GE
Colour:
Polished Satinless Steel
Satin Satinless Steel
128
ASSA ABLOY Floor Spring
DC450
Characteristics of DC450:
Same dimensions for two bodies according to fix
size EN3/EN4
Hydraulic control over 130° in both door swing
directions
Adjustable door speed and latching speed
through top regulating valves
Cast Iron body
• Adjustments in all directions within the cement
box
Cement box is hot zinc plated and only 40 mm high
• Cover plates and eyelets are made in Polished or
Satin Satinless Steel
• Interchangeable spindle from 0 to 30mm
• Available without hold-open or with hold-open
angle 90°, 105°
Technical details:
Floor Spring
Fix closing force EN3/EN4
DC450 Door width up to 950mm/1100mm
Door weight up to 120kg
Max. opening angle 130°
Closing speed Variable between 130°-15°
Latching speed Variable between 15°- 0°
Back-check No
Weight 3.8kg
Height 40 mm
Length 277 mm
Width 108 mm
Body adjustment within cement box Vertical 2mm, side 6mm, front 7mm, angular 4°
DIN-direction Left/Right handed or double-action
Hold-open mode 90°/105°/Non hold-open
In compliance with EN1154
130
DC450
Floor Spring
Dimensional
drawings for DC450
131
DC450
AC619
Floor Spring
Available in Satin
Accessories for Satinless Steel, Polished
DC450 Satinless Steel and
Polished Brass.
AC115
Reversible bottom
arm in steel for double
action doors, socket for
Italian squared spindle.
AC393
Reversible bottom
arm in steel for double
action doors, socket for
German rectangular
spindle.
AC8
Double-action top pivot
AC375
Double-action top pivot
in full steel with self-
lubricating bushing
132
DC450
AC583
Floor Spring
Right and left bottom
arm in steel for single
Accessories and
order placement action doors, 36mm
information for offset, socket for Italian
DC450 square spindle, Silver or
Black painted.
AC392
Right and left bottom
arm in steel for single
action doors, 36 mm
offset, socket for
German rectangular
spindle, Silver and Black
painted ABS covers.
AC384
Right and left top arm
in full steel, 36mm
offset. Silver or Black
painted ABS cover.
AC612
Sealing compound for
floor springs
133
DC450
Detachable spindles
Floor Spring Italian spindle - square
shape (left image)
Accessories and German spindle - flat-
order placement conical shape
information for AC340 AC341 AC342 AC343 AC344 AC345 AC346 IT (right image)
DC450 AC360 AC361 AC362 AC363 AC364 AC365 AC366 GE
134
Ordering matrix and replaceable
spindle calculation
The following table shows the product and accessories overview and enables to select the right accessories for ASSA ABLOY floor
springs. The table below shows how to choose the correct replaceable spindle. The distance between the door leaf and the floor can
be enlarged if needed by means of various heights of replaceable spindles.
Cover plate
DCE7293TS0 F
Floor
Spring
HAmin
30
25
20
X min X max
15
HAmax
10
HAmin
1 2 3 4 5 6
Legend:
HA = Height adjustment within the cement box
SH = Spindle Height
X = Floor clearance
Formula Example
X = HA + SH X = 34.5mm Floor Spring = DC420 HA min = 5.5 HA max = 10.5
34.5mm = (5.5mm or 10.5mm) + SH;
SH max = 29mm AC345/AC365;
SH min = 24.5mm AC344/AC364
135
Ordering Assistance
A-A 18
40
200
180
40
200
55
66
200
25
25
,5
AC583
62
15
20,5
(Italian)
10
Right and Left steel bottom arm for
3˚
21
21
18
10
Square Italian spindle.
10
24
67 67 15
(German)
Painted ABS covers:
36
A058300 - Silver
20
46
19
A058330 - Black
20,5
6,56
10
50 46 46 46 54 54 62
9
56
0 46 4 46
10 22 90 10
34
180 23 35 75
27
27
27
10 22 90 10
20
20
A
34 20
25
32
20.5 10
34
24
20
28
28
27
196
27
56
56
36
36 3˚
Spindle
196 33 120
35 153
132 132
Left Cover Right Cover
Type Material Steel Zamac Zamac Steel Steel Steel Brass Steel Steel Steel
Adjustment Adjust-
able
Max. Door Wt. ≤300kg ≤100kg ≤170kg ≤300kg
Square Flat- Flat-
Extension Name Art. no. Name Art. no. Spindle type Square type
type conical conical
MA0008S0
MA0118S0
MA0375S0
MA058330 - Black
MA058300 - Silver
MA039230 - Black
MA039200 - Silver
MA0002S0
MA0213S0
MA0115S0
MA0393S0
15mm AC363 MA0363S0 AC343 MA0343S0
Cover plates in
Polished Brass, Satin
Satinless Steel and
Polished Satinless
Steel:
136
Floor Spring AF-200F
Characteristics of AF-200F:
CE Mark product 15
2 1
Easy installation with thin body design 2 1
137
Floor Spring AF-200F
Technical details:
Floor Spring
Fixed closing force EN3
Door width up to 950mm
Technical details for
AF-200F Door weight up to 120 kg
Max. opening angle 120°
Closing speed Variable between 120°-15°
Latching speed Variable between15°- 0°
Back-check No
Height 40.5mm
Length 319mm
Width 108mm
Body adjustment within cement box Body adjustable inside cement box with height
up to 4mm, width up to 5mm, length up to 7mm
DIN-direction Left/Right handed doors or double action
Hold-open mode 90,° Non hold-open
In compliance with EN1154
CE Marking for building products Yes
Fire and smoke protection Yes
Characteristics of AF-224P: 4
CE Mark product 1
2
Easy installation with thin body design 2 1
139
Floor Spring AF-224P
Technical details:
Floor Spring
Adjustable closing force EN2-4
140
Floor Spring - Accessories
141
ASSA ABLOY Floor Spring
AF503 Series
Characteristics of AF503:
• Double action floor spring
• Cast iron body
• Dual valve adjusting, closing and latching speed
• Maximum opening angle in each direction of 130°
• Applicable for timber, glass and aluminum door
• Power fixed size 3 290
• Standard spindle included is 10mm 274
• Hot zinc plated steel
• Satin stainless steel (standard) - US32D
• Optional Polished stainless steel - US32
• Adjustment within cement box
97
116
274
142
ASSA ABLOY Floor Spring
AF600 Series
308
143
Patch Fittings
Door thickness:
• Glass door thickness 10mm- 12mm
32 161
145
Patch Fittings
32
51
Model no.: ATPT - 022
Patch Fitting Range
Part description: ATPT - 022 ASSA ABLOY top
Top patch to suit patch to suit transom closer (side load)
transom closer
Finish: SSS - Satin Satinless Steel - US32D
161
164
164
32 161
146
Patch Fittings
or right)
Description: ASSA ABLOY Patch for over panel, side
6
10
21 Ø15
51
8
Finish: Satin Satinless Steel - US32D
Polished Satinless Steel - US32
147
Patch Fittings
106
Finish: Satin Satinless Steel - US32D 32
52
106
Model no.: AOPC - 061
52
106
52
148
Patch Fittings
149
Patch Fittings
20
15
92
16
51
1
32
161
32 72 36
20
51
28
51
150
Patch Fittings
161
32
51
51
106
51
218
32
51
151
Patch Fittings
Typical installation
details
152
Patch Fittings
153
Patch Fittings
Typical installation
details
Note: Not to scale
154
Patch Fittings
155
Patch Fittings
156
Pull Handles
Technical details:
Compliance to Tubular Pull Handle
BS8424:2003 Door thickness
30mm to 50mm - Timber & Metal door
10mm - 12mm - Glass door
• Spindle - 8mm x 8mm
Available length (CTC): 350 - 1500
Back-to-back bolting arrangement
Optional one side fixing
Optional extended spindle
Finish SSS - US32D, PSS - US32
*Pictured
159
Pull Handles
160
Pull Handles
Model no.: AEH - 06A & AEH - 06B & AEH - 06C
Pull Handle
Description: ASSA ABLOY D - Type offset entrance
AEH - 06 Series Handles
Back-to-back mount
Door thickness: 12mm glass
38- 50mm, Aluminium and Timber
(Please specify)
162
163
Shower Hardware
164
ASSA ABLOY Shower Hardware
Features & Benefits
165
Glass Hardware - Shower Cubicles
166
Glass Hardware - Shower Cubicles
167
Glass Hardware - Shower Cubicles
168
Glass Hardware - Shower Cubicles
169
Glass Hardware - Shower Cubicles
170
Glass Hardware - Shower Cubicles
171
Glass Hardware - Shower Cubicles
172
Glass Hardware - Shower Cubicles
173
Glass Hardware - Shower Cubicles
174
Glass Hardware - Shower Cubicles
175
Glass Hardware - Shower Cubicles
177
Glass Hardware - Shower Cubicles
178
Glass Hardware - Shower Cubicles
Model no.: A B C
ASC911-19 Ø19 Ø25 58
ASC911-22 Ø22 Ø28 58
ASC911-25 Ø25 Ø31 58
179
Glass Hardware - Shower Cubicles
Model no.: A B C
ASC912-19 Ø19 Ø25 58
ASC912-22 Ø22 Ø28 58
ASC912-25 Ø25 Ø31 58
Model no.: A B C
ASC913-19 Ø19 Ø25 58
ASC913-22 Ø22 Ø28 58
ASC913-25 Ø25 Ø31 58
Model no.: A B C
ASC914-19 Ø19 Ø25 60
ASC914-22 Ø22 Ø28 60
ASC914-25 Ø25 Ø31 60
180
Glass Hardware - Shower Cubicles
Model no.: A B C
ASC915-19 Ø19 Ø30 58
ASC915-22 Ø22 Ø33 58
ASC915-25 Ø25 Ø36 58
181
Glass Hardware - Shower Cubicles
182
Glass Hardware - Shower Cubicles
183
Glass Hardware - Shower Cubicles
184
Glass Hardware - Shower Cubicles
185
Glass Hardware - Shower Cubicles
187
General Hardware
188
ASSA ABLOY General Hardware
Features & Benefits
Technical Details:
General hardware range
Door Stops
Coat / Robe Hooks
Door Chains
Bolts
Door Viewer
Barrel Bolts
Timber and Aluminium Flush Bolts
Sliding Door Hardware
Push and Pull Plates
189
General Hardware
190
General Hardware
191
General Hardware
192
General Hardware
193
General Hardware
194
General Hardware
195
General Hardware
196
General Hardware
197
General Hardware
198
General Hardware
199
General Hardware
Technical details:
Standard &
• Lockset with RFID Proximity reader
Certification • Powered by 4xAA batteries that provide
up to 12 months normal usage
EN12209 Under voltage indication
Compliance • 500 event audit trail
• 2 alternative Stainless Steel handles
• High security mortise lockcase available in two
European versions
• Panic release function – the deadbolt and latch
are automatically retracted by inside handle for
easy egress in emergency situations
• Optional door access controller wall reader
for common access points
202
Wireless Access
Control
Access Control User friendly Software Common access points, and RFID Technology
emergency exits
ASSA ABLOY Wireless Access Control Light Commercial locking solution provides you with all the features
Features and you will need to manage your security requirements and provide peace of mind to all users. Our locking
Flexibility solutions provide total flexibility, adapting our solutions to your specific needs.
203
ASSA ABLOY Wireless Access
Control Escutcheon
Technical details:
Lever Handle
Door Opening Time Open the door after pressing the
Dimension
handle, automatically locks within 5
Technical details seconds
Under Voltage Indication Early warning given for low batteries
- units will continue to operate for
approximately 50 times until such time
the batteries can be changed
Working Conditions
Anti-Static Interference >15000V
Working Humidity 20%-98%
Working Temperature -20°C - +70°
RFID Card
RFID Card Type ISO 14443A MIFARE
Frequency 13.56MHz
Induction Distance Approx. 30mm
Wireless Access
Control
Curved Handle
204
Access Management Components
205
Access Control Management
System
206
Product Reference Codes Functions
Wireless Access Computer ASSA ABLOY Desktop Client: ASSA ABLOY Server
Control Requirements: Client:
Supported Operating Windows 7, Windows Server 2003, Windows Windows 7, Windows
Computer Systems: Server 2008, Windows Server 2003, Windows
Requirements Server 2008 Server 2008, Windows
R2, Windows Vista, Windows XP Server 2008 R2,
System Memory: Minimum 2 GB Minimum 4 G
Hard Disk: 1 GB of Disk Space 4 GB of Disk Space
Processors: ASSA ABLOY Desktop Client & ASSA ABLOY Server / Client:
Minimum: AMD Opteron, AMD Athlon 64, Intel Xeon with Intel EM64T
X64:
support, Intel Pentium IV with EM64T
support (Processor Speed - 1.0 GHz or faster)
207
Electromagnetic Locking
Technical details:
• Holding forces from 250kg up to 280kg for single
leaf, 500kg up to 560kg for double leaf
• Dual voltage: site selectable 12 Vdc or 24 Vdc
• High holding force: refer to the technical data
overleaf
• Self-alignment: armature plate pivots to
accommodate door drop
209
A4 Single Leaf Electromagnetic Lock
Electromagnetic Locking:
A4 Single The Single Series Electromagnetic Locks
Electromagnetic operate with holding forces from 250kg up to
Lock 280kg. Covering a range of applications the A4
Electromagnets are ideal for applications from
cupboard doors through to high use commercial
swing doors.
With fixing options including wood, aluminium
and steel constructions as well as glass
door applications, the range caters to most
electromagnetic needs
• Aluminium doors
Applications
• Glass doors
• IT storage rooms
• Access control
• Surface mount for
inward and outward
swinging doors
210
A4 Single Leaf Electromagnetic Lock
Electromagnetic Locking:
A4 Single The Single Series Electromagnetic Lock should
Electromagnetic be constructed in an aluminium case with heavy
Lock duty electromagnet. The range only operates in
Fail Safe mode and relies on a secondary lock or
battery backup system. In some cases the Magnet
Armature Plate pivots to accommodate door
drop. The lock needs to be equipped with “smart
electronics” that have zero residual magnetism
(instantaneous release). This is crucial for correct
operation
26 26
25 25
0 0
47 47
Typical Installation
MOUNTING PLATE
Ordering Information
211
A4 Double Leaf Electromagnetic Lock
Electromagnetic Locking:
A4 Double The Electromagnetic Locks operate with holding
Electromagnetic forces from 500kg up to 560kg. Covering a
Lock range of applications these magnets are ideal
for applications from access ways through to
high use commercial swing doors. With fixing
options including wood, aluminium and steel
constructions as well as glass door applications,
the range caters to most electromagnetic needs.
• Aluminium doors
Applications
• Double swing doors
• Access control
• Surface mount for
inswing and outswing
doors
212
A4 Double Leaf Electromagnetic Lock
Electromagnetic Locking:
A4 Double The Double Series Electromagnetic Lock should be
Electromagnetic constructed in an aluminium case with heavy duty
Lock electromagnet. The range only operates in Fail Safe
mode and relies on a secondary lock or battery
backup system. The lock needs to be equipped
with “smart electronics” that have zero residual
magnetism (instantaneous release). This is crucial
for correct operation
26 26
50
0 50
0
47
47
Non Monitored Lock Monitored Lock
Typical Installation
DOOR FRAME
RUBBER WASHER
MAGNET
DOOR
ARMATURE
Ordering Information
213
Electromagnetic Lock - Accessories
Monitoring Options:
Hall-Effect monitoring or Bond Sensor
This is a monitoring output from electromagnetic
lock by detecting an armature plate and notifying
access control and/ or alarm systems that a door
is properly secured. The sensitive magnetic field
monitors the surface of the armature plate,
providing maximum assurance that the lock is
engaged. Movement in the armature’s position
beyond the set tolerance alerts the access control
system that the magnetic lock may not be
U Bracket U Bracket Plate
generating its full holding force.
214
Why are we the global leader in door opening solutions?
215
www.assaabloy.com
ASSA ABLOY India Pvt. Ltd. ASSA ABLOY India Pvt. Ltd. ASSA ABLOY India Pvt. Ltd.
#32/3, 4th Floor 3-H, GEE Emerald 16th Floor, Tower - B,
1st Main Road, New no. 312, Old no. 151 Building No. 5, DLF Epitome,
Domlur Layout, (behind Post Office) Village Road, Nungambakkam DLF Phase lll,
Bengaluru, 560038, Chennai - 600034 Gurugram - 122002
Karnataka, India Tamil Nadu, India Haryana, India
216