Professional Documents
Culture Documents
SOP-QAC-QA-04D 22-Apr-22 1 of 2
PURPOSE:
Observation
No. Test Item UOM Requirement Method Judgment
Min Max
- Free from scratch, crack, sink mark and damage.
1 Appearance - Visual ACCEPT ACCEPT
- Emboss content and appearance
6 Thread Outer mm 39.55 ± 0.20 39.35 39.75 Using jig go-no go OK PASS
Diameter
8 Overal Height mm 228 ± 1.20 226.80 229.20 Caliper(S/N:1154873) 228.15 228.48 PASS
REMARK:
ACCEPT
OK / Accept / Hold /
Khanh N.D Thai N.H Giang D.V
NG
Page Number
Record Format Number Report date
SOP-QAC-QA-04D 22-Apr-22 2 of 2
1 Appearance OK OK OK OK OK OK OK OK OK OK OK OK
2 Color OK OK OK OK OK OK OK OK OK OK OK OK
3 Assembly OK OK OK OK OK OK OK OK OK OK OK OK
4 Internal Check OK OK OK OK OK OK OK OK OK OK OK OK
5 Weight 57.6 57.4 57.3 56.6 56.4 56.5 56.8 57.3 57.5 57.8 57.7 58.2
Thread Outer Diameter (check
6 by jig Go-no go) OK OK OK OK OK OK OK OK OK OK OK OK
8 Overal Height 228.20 228.26 228.24 228.25 228.32 228.31 228.42 228.45 228.48 228.43 228.38 228.35
9 Width 64.42 64.38 64.45 64.48 64.52 64.55 64.58 64.62 64.58 64.65 64.72 64.75
10 Thick 111.52 111.48 111.57 111.47 111.55 111.55 111.75 111.58 111.62 111.65 111.64 111.57
1 Appearance OK OK OK OK OK OK OK OK OK OK OK OK
2 Color OK OK OK OK OK OK OK OK OK OK OK OK
3 Assembly OK OK OK OK OK OK OK OK OK OK OK OK
4 Internal Check OK OK OK OK OK OK OK OK OK OK OK OK
5 Weight 58.5 58.4 58.2 57.8 57.6 57.2 57.5 57.3 57.7 57.2 56.8 56.7
8 Overal Height 228.22 228.25 228.16 228.15 228.18 228.25 228.27 228.32 228.37 228.42 228.45 228.41
9 Width 64.75 64.72 64.68 64.65 64.63 64.48 64.42 64.47 64.55 64.58 64.62 64.65
10 Thick 111.43 111.48 111.45 111.62 111.67 111.72 111.55 111.63 111.52 111.45 111.62 111.54