Professional Documents
Culture Documents
1856-1 / 2
CE STANDARD FOR
FACTORY-MADE MODULAR CHIMNEY SYSTEMS
JEREMIAS GROUP
leading manufacturer of
modular factory made chimney
systems and Industrial
freestanding stacks for all types
of exhaust gases and ventilation
applications.
Stainless steel sheet processing,
specialised in mass production
of small/medium sized tubular
components.
Sales Network in 60
15.000 references 9 Production sites 1.500 employees
countries
Moscow, Russia
Blackpool, UK
Verona, Italy
Marietta ,USA
Germany
Wassertrüdingen 2x
Hergatz
CE MARK
EN 1856 -1 / 2
CE STANDARD FOR
FACTORY-MADE MODULAR
CHIMNEY SYSTEMS
CE MARK
WHAT DOES THE CE MARK MEAN FOR STAINLESS STEEL CHIMNEY SYSTEMS?
The CE MARK is the symbol – obligatory since April 2005
– that certifies that a stainless steel chimney is in
accordance with the EN 1856-1.
CE MARK
WHAT DOES THE CE MARK MEAN FOR STAINLESS STEEL CHIMNEY SYSTEMS?
The manufacturer is obliged to realize the complete
initial test of the chimney in a laboratory, and moreover, a
Certified Body will:
CE MARKING
CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS
1. Standard
2. Temperature Level
3. Pressure Level
4. Condensate resistance
5. Corrosion resistance
6. Flue liner material specification
7. Soot fire resistance (O: no; G:yes)
8. Other declared characteristics
9. Certificate
10. Declaration of Performance DoP
11. Compulsory product identification
and labelling
CE MARK according to EN 1856-1 / 2
CE MARKING
1- STANDARD
EN 1856-1 for vertical chimneys
EN 1856-2 for connecting pipes
2- TEMPERATURE LEVEL
Maximum working temperature.
The temperature used in the test and the resulting temperature levels achieved are as follows:
That means that to reach a Temperature level of T600 the test is conducted with 700 °C!
CE MARK according to EN 1856-1 / 2
CE MARKING
3- PRESSURE LEVEL
Admitted overpressure inside the flue, with its corresponding leakage rate
Take care of the different leakage rates H2 is not the same as H1!
Jeremias internal test for DWKL shows a pressure type of 15.000 with a leakage rate of H1
CE MARK according to EN 1856-1 / 2
CE MARKING
4- CONDENSATE RESISTANCE
Suitability of the flue for wet or dry conditions.
D: the flue is suitable only for dry conditions. It does not resist condensate.
W: the flue is suitable whether for dry and wet conditions. It resists condensate water inside.
5- CORROSION RESISTANCE
Level of corrosion resistance due to the products of combustion of the different kinds of combustibles and different working conditions (dry or wet)
– V1: Tested and approved as resistant to attack from products of combustion from gas.
– V2: Tested and approved as resistant to attack from products of combustion from light oil (sulphur content <0,2%) and natural wood in dry conditions, and
from gas in wet conditions (condensing appliances)
– V3: Tested and approved as resistant to attack from products of combustion from heavy oil (sulphur content >0,2%), solid fuels and peat in dry conditions
– Vm: Not tested. The manufacturer certifies only the material used in the inner wall by the quality certificate of the steel. For flues with this class there are
specific regulations in each country indicating what material is suitable for each installation. As general guidance the stainless steel AISI 304 is equivalent to
class V1, and the stainless steel AISI 316L is equivalent to classes V2 and V3
CE MARK according to EN 1856-1 / 2
CE MARKING
6- FLUE LINER MATERIAL SPECIFICATION
The material of the inner liner must be specified and its minimum thickness as well:
Designation
European AISI Kind of m aterial
EN 1856
L10 EN AW - 4047 A - Aluminium
L11 EN AW - 1200 A - Aluminium
L13 EN AW - 6060 - Aluminium
L20 1.4301 304 Stainless steel
L30 1.4307 304L Stainless steel
L40 1.4401 316 Stainless steel
L50 1.4571 316Ti Stainless steel
L50 1.4404 316l Stainless steel
L60 1.4432 316l Stainless steel
L70 1.4539 904l Stainless steel
L99 TBD TBD TBD
904L, is the highest quality grade and is expected to withstand the corrosion effect of multi-fuel, wood or heavy oil even in wet conditions. Light oil is less corrosive and
normally 304 (L20) has proved adequate in dry conditions, but in the increasingly common wet conditions created by high efficiency condensing boilers, the higher grade
is required. 316L. Is the most common used grade for gas and light oil in condensing conditions. After that, the minimum thickness of this inner liner is specified as follows:
– 040: 0,4mm
– 050: 0,5mm
– 060: 0,6mm
CE MARK according to EN 1856-1 / 2
CE MARKING
7- SOOT FIRE RESISTANCE (O: NO; G: YES)
It is expressed as G if the flue System has been tested, and as O if not. This classification is followed by the minimum distance (in mm) to combustible material.
– The G test is a thermal shock of 1.000ºC during 30 minutes during which the System must endure and the temperature of combustible materials placed at the
declared distance must not exceed 100ºC at an ambient temperature of 20ºC.
– The systems with O classification have not passed this test, so they cannot be used for any installation where the products of combustion contain soots (solid
fuels, multifuels...). For low temperature applications, for instance room sealed boilers, where joints are used.
The characteristics of the previous points must be indicated in all documents of CE marking
Hereinafter is a list of other characteristics that only appear in the DoP. (Declaration of Performance)
PRODUCT LABELLING
11- COMPULSORY PRODUCT IDENTIFICATION AND LABELLING
Jeremias product range includes 150 different CE certified systems covering specific
applications of the exhaust industry complemented by freestanding Industrial steel
chimneys up to 3 meter diameter.
Besides this compulsory CE Certification, Jeremias has also special certifications and
listings needed in specific countries under i.e.; BS, Hetas, Swiss, Russian or US
standards.
For further information, Jeremias can supply technical guidance on various standards
including the latest version of the European Standard 1856-1/2:2010. Please contact our
certification department.
www.jeremias-group.com
STEP AHEAD
YOUR SOLUTIONS
WITH JEREMIAS !
JEREMIAS
YOUR RELIABLE PARTNER!
www.jeremias-group.com