This document is a certificate of gauge inspection for a sound meter with gauge ID QBSM01 and model SL-4040. It was inspected on October 13, 2016 and is due for reinspection on October 13, 2019. The inspection checked for safety, damage, functionality, rust, labels, connections, ergonomics, and accessories. Dimension and tolerance of the master gauge were also checked against the actual gauge. Gauge repeatability and reproducibility studies were completed. The gauge was accepted with no remarks or need for rework.
This document is a certificate of gauge inspection for a sound meter with gauge ID QBSM01 and model SL-4040. It was inspected on October 13, 2016 and is due for reinspection on October 13, 2019. The inspection checked for safety, damage, functionality, rust, labels, connections, ergonomics, and accessories. Dimension and tolerance of the master gauge were also checked against the actual gauge. Gauge repeatability and reproducibility studies were completed. The gauge was accepted with no remarks or need for rework.
This document is a certificate of gauge inspection for a sound meter with gauge ID QBSM01 and model SL-4040. It was inspected on October 13, 2016 and is due for reinspection on October 13, 2019. The inspection checked for safety, damage, functionality, rust, labels, connections, ergonomics, and accessories. Dimension and tolerance of the master gauge were also checked against the actual gauge. Gauge repeatability and reproducibility studies were completed. The gauge was accepted with no remarks or need for rework.
Gauge ID QBSM01 MODEL SL-4040 DESCRIPTION Sound Meter MAKE BEE TECH
TYPE OF Gauge Digital CHARACTERISTICS 30~130dB
MPTB TO COMPLETE BELOW NAME OF THE SUPPLIER ---- GRN NO & GRN DATE ---- PURCHASE ORDER NO ---- PURCHASE ORDER DATE ---- PRODUCT PART NO ---- PRODUCT PART DATE ---- DRAWING REVISION NO ---- DRAWING REVISION DATE ---- Gauge DRAWING NO ---- Gauge DRAWING DATE ---- Gauge DRG REVISION NO ---- Gauge DRG REVISION DATE ---- INSTALLATION & COMMISSIONING DATE
CHECK POINTS (TICK a IN BOX, IF OK) REMARKS
CHECK FOR SAFETY ASPECTS OF THE GAUGE
CHECK FOR ANY DAMAGES
CHECK FOR THE MOVEMENT OF SLIDERS
CHECK FOR RUST
CHECK FOR LABELS
CHECK FOR CONNECTIONS
CHECK FOR ERGNOMICS
CHECK ALL THE ACCESSORIES AS PER THE PO
CHECK FOR ANY OTHER THINGS
GAUGE MASTER INSPECTION DETAILS
DIMENSION & MASTER Gauge ID MASTER TYPE ACTUAL SIZE REMARKS TOLERANCE
GAUGE STUDY DETAILS
ACCEPTANCE STUDY TYPE RESULT CONCLUSION CRITERIA Gauge R&R ( Parameter vies) <10% Preferred
>20% <30% can be
accepted based on case to case study
Gauge R&R ( Attribute gauges) >90%
Remarks
Refer Operating Instruction FPC-BNG-06-P-0101.
Disposition: Accepted Rework Rejected
Checked by: Approved by :
HBO DOCUMENT REVISON TRACKING SHEET
Revision Number Revision date Changes done
0 Jul-15 Initial release 01 10.01.2018 Form identification done as per new logic
Company Logo and Name changed (Hanon Bangalore Operations
02 16.07.2019 Private Limited (Formerly Known Magna Powertrain Bangalore Private Limited) Doc No FPC-BNG-21-F-0001 Rev No. 01 Rev Date: 15.7.2019 Change updated by Remarks Sunil Kumar MB-QM-QF-01