Professional Documents
Culture Documents
All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edi-
ted or processed for any other purpose, nor otherwise transmitted, published or made available to a
third party without the manufacturer's express written consent.
Design details
Design
Body materials
Overview of available materials
Material Material Temperature KSB
number limit code
ASTM A216 gr. WCC 1.0619 -29 ℃ to +260 ℃ 1
ASTM A351 gr. CF 8M 1.4408 -50°C to + 260°C 6
Product benefits
▪ Extra long neck
– allows continuous heat insulation of pipe and valve
▪ Flange faces with large sealing surfaces
– allow the use of a wide range of standardised sealing
elements
▪ Patented plastomer or metal seat ring design (AMRI pat-
ent)
– Tight shut-off: the highest sealing capability on the
market, even at full pressure rating
– Long service life
– Easy to service
▪ Body seat protected against abrasion
– Long service life
▪ Two independent sealing systems at the stem passage
– The highest sealing capability on the market, even at
full pressure rating
– Long service life
– Easy to service
▪ Fire-safe or emission control graphite packing
– The valve is fire-safe in compliance with B56755-2
– The valve meets the requirements specified in TA Luft
(VDI 2440).
▪ Stem in anti-blow-out design
– Actuator can be removed safely
– Protection of persons
▪ The valve body is closed at the bottom.
– Reliable sealing to atmosphere
Related documents
Pressure/temperature ratings
1) For temperatures < -29 °C and pressures > 8 bar, please contact us.
Technical data
Kinematics
▪ The valve disc is pressed onto the seat by a double-offset
kinematics.
▪ The rotation axis is offset from the seat and from the pipe
centreline.
▪ This design eliminates friction between the seat and the
sealing surface of the valve disc as the valve disc opens
and closes.
▪ Tight shut-off is ensured even after a high number of
actuating cycles.
▪ Valve shut-off complies with the most exacting specifica-
tions and standards.
Tight shut-off
▪ The valve complies with the standards listed below.
▪ This valve is bi-directional; the preferred flow direction is
indicated by the arrow on the body (differential pressure
applied from the stem side).
Torques
2) The torque values indicated include safety factors for actuator selection.
Hydraulic characteristics
DN NPS Flow coefficient with disc fully open Zeta
Kv0 Cv0
50 2 70 80 2,04
65 2½ 110 145 2,35
80 3 180 210 2,02
100 4 330 380 1,47
125 5 560 650 1,24
150 6 910 1055 0,98
200 8 1300 1510 1,51
250 10 1800 2090 1,93
300 12 2500 2900 2,07
350 14 3400 3950 2,07
400 16 4500 5220 2,02
450 18 6500 7540 1,55
500 20 8600 10000 1,35
600 24 12000 14000 1,44
Fire-safe design
Valves with metal seat ring are fire-tested to BS 6755, Part 2,
and certified as "fire safe".
This certification covers tight shut-off (metal seat ring) and
sealing at the stem passage (fire-safe graphite packing).
The fire-safe design is recommended for the full-lug body T4
and the flanged body T7.
TA Luft-compliant design
The valves with plastomer and metal seat ring meet the re-
quirements of TA Luft (07.2002 edition) and are certified in
compliance with VDI 2440.
Tightness class at the stem: < 10 -4 mbar.l (s.m).
The valves are fitted with a special graphite packing (SUPA-
GRAPH CONTROL) certified to TA Luft [German Technical
Guidelines on Air Quality Control]. However, this packing has
no fire-safe certification.
ATEX-compliant design
(Optional) variant which meets the requirements of the ATEX
directive 94/9/EC (group II, category 2, zones 1 and 21).
Possible configurations
Seat type Graphite packing Certification Variant
Fire-safe TA Luft ATEX
Plastomer TA Luft (SUPAGRAPH CONTROL) No Yes Yes
Metal Fire-safe Yes No Yes
TA Luft (SUPAGRAPH CONTROL) No Yes Yes
Materials
Sectional drawing - Wafer-type body with flat faces and full-lug body
Taper pin connection between stem and valve disc for DN 600 (24")
Taper pin connection between stem and valve disc for DN 600 (24")
List of components for wafer-type body with flat faces, full-lug and flanged body
Part No. Description DN Material Temperature KSB code
56-24) Taper pin 600 Stainless steel
68-4 Washer 50-200 Stainless steel
100 Body 50-600 Steel ASTM A 216 gr. WCC/1.0619 -29 ℃ to +260 ℃ 1
Stainless steel ASTM A351 gr. CF8M / 1.4408 -50°C to + 260°C 6
Stainless steel ASTM A351 gr. CF3M Mo > 2.75 -50°C to +150°C 6m
for marine applications
210 Stem 250-600 Stainless steel ASTM A 479 gr. 431 / 1.4057 -29 ℃ to +260 ℃ 6e
Stainless steel ASTM A 479 gr. 316L/1.4404, PS -50 ℃ to +260 ℃ 6
limited to 10 bar
Stainless steel 1.4462, PS limited to 16 bar -50 ℃ to +260 ℃ 7e
213 Actuating stem 50-600 Stainless steel ASTM A 479 gr. 431 / 1.4057 -29 ℃ to +260 ℃ 6e
Stainless steel ASTM A 479 gr. 316L/1.4404, PS -50°C to + 260°C 6
limited to 10 bar
Stainless steel 1.4462, PS limited to 16 bar -50°C to + 260°C 7e
310.13) Plain bearing 50-600 Stainless steel + PTFE
310.24) Plain bearing 50-600 Stainless steel + PTFE
310.34) Plain bearing 50-600 Stainless steel + PTFE
543.1 Spacer bush 250-600 Stainless steel
543.2 Spacer bush 250-600 Stainless steel
550 Valve disc 50-600 Stainless steel ASTM A 351 gr. CF8M/1.4408 -50°C to + 260°C 6
Stainless steel ASTM A351 gr. CF3M Mo > 2.75 -50°C to + 150°C 6m
for marine applications
553.1 Thrust insert 50-200 Stainless steel
553.2 Thrust insert 50-200 Stainless steel + PTFE
553.3 Thrust insert 250-600 Stainless steel
554 Washer, flat 50-600 Stainless steel
561.1 Half round head 50-600 Stainless steel
grooved pin
561.24) Grooved pin 50-600 Stainless steel
561.34) Grooved pin 50-600 Stainless steel
901.1 Hexagon head bolt 50-600 Stainless steel class A4.70
901.24) Hexagon head bolt 600 Stainless steel class A4.70
903 Screw plug 250-600 Stainless steel class A4.70
9314) Lock washer 600 Stainless steel
970 Name plate 50-600 Stainless steel
List of components for metal seat ring, operating pressure < 25 bar
Part No. Description Material Comments KSB code
50-55) Compression ring Stainless steel
50-6 Locking ring Stainless steel
72-2 Centring flange Stainless steel
72-3 Retaining flange Stainless steel
1445) Metal seat ring Nickel
901.3 Hexagon head bolt Stainless steel class A4.70
9045) Grub screw Stainless steel class A4.70
9145) Hex. socket head cap screw Stainless steel class A4.70
932 Circlip Stainless steel class A4.70
List of components for metal seat ring, operating pressure < 50 bar
Part No. Description Material Comments KSB code
41-25) Static seal Nickel
72-2 Centring flange Stainless steel
72-3 Retaining flange Stainless steel
1445) Metal seat ring Stainless steel
901 Hexagon head bolt Stainless steel class A4.70
9045) Grub screw Stainless steel class A4.70
9145) Hex. socket head cap screw Stainless steel class A4.70
932 Circlip Stainless steel class A4.70
Dimensions
* Flat end s in Ø z or s
Dimensions in mm
DN NPS l1 h1 h2 Top flange Square stem end Flat stem end Valve disc open
ISO 5211
No. h4 s h3 s ØZ h3 e1 e2 e3 e4
50 2 43 175 54 F07 16 - - 14 18 30 36 9 - -
65 2½ 46 190 67 F07 16 - - 14 18 30 49 13 13 1
80 3 50 205 74 F07 16 - - 14 18 30 62 18 38 6
100 4 54 225 90 F07 16 - - 14 18 30 81 24 64 13
125 5 59 240 131 F10 18 - - 19 25 35 100 31 87 21
150 6 59 250 148 F10 18 - - 22 28 40 130 46 115 31
200 8 73 290 183 F12 20 - - 22 28 40 174 64 158 46
250 10 83 325 217 F14 22 30 55 - - - 222 84 204 62
300 12 92 375 248 F16 26 40 75 - - - 260 96 249 81
350 14 117 405 296 F16 26 40 75 - - - 299 105 292 96
400 16 133 440 322 F25 30 50 85 - - - 350 125 340 113
450 18 149 475 355 F25 30 60 80 - - - 408 147 397 133
500 20 159 510 392 F30 34 60 80 - - - 445 160 438 150
600 24 181 585 475 F30 34 70 105 - - - 542 201 531 185
Face-to-face length
The face-to-face lengths of DANAÏS MT II Class 300 valves with wafer-type body with flat faces meet the requirements of API 609
Class 300. Exceptions:
- DN 50 and 65 comply with EN 558-16
- DN 125 (not standardised), its width is identical to DN 150 API 609 Table 2 Class 300
Full-lug body - T4
* Flat end s in Ø z or s
Dimensions in mm
DN NPS l1 h1 h2 Top flange Square stem end Flat stem end Valve disc open
ISO 5211
No. h4 s h3 s ØZ h3 e1 e2 e3 e4
50 2 43 175 76 F07 16 - - 14 18 30 36 9 - -
65 2½ 46 190 87 F07 16 - - 14 18 30 49 13 13 1
80 3 50 205 94 F07 16 - - 14 18 30 62 18 38 6
100 4 54 225 111 F07 16 - - 14 18 30 81 24 64 13
125 5 59 240 131 F10 18 - - 19 25 35 100 31 87 21
150 6 59 250 148 F10 18 - - 22 28 40 130 46 115 31
200 8 73 290 181 F12 20 - - 22 28 40 174 64 158 46
250 10 83 325 214 F14 22 30 55 - - - 222 84 204 62
300 12 92 375 248 F16 26 40 75 - - - 260 96 249 81
350 14 117 405 296 F16 26 40 75 - - - 299 105 292 96
400 16 133 440 312 F25 30 50 85 - - - 350 125 340 113
450 18 149 475 355 F25 30 60 80 - - - 408 147 397 133
500 20 159 510 392 F30 34 60 80 - - - 445 160 438 150
600 24 181 585 475 F30 34 70 105 - - - 542 201 531 185
Face-to-face length
The face-to-face lengths of DANAÏS MT II Class 300 valves with full-lug body meet the requirements of API 609 Class 300. Excep-
tions:
- DN 50 and 65 comply with EN 558-16
- DN 125 (not standardised), its width is identical to DN 150 API 609 Table 2 Class 300
Flanged body - T7
DN 50-80 and DN 125 (2"-3" and 5") DN 100 and DN 150-600 (4" and 6"-24")
* Flat end s in Ø z or s
Dimensions in mm
DN NPS l1 f h1 h2 Top flange Square stem Flat stem end Valve disc open
ISO 5211 end
No. h4 s h3 s ØZ h3 e1 e2 e3 e4
50 2 150 28,5 175 83 F07 16 - - 14 18 30 - - - -
65 2½ 170 33,5 190 95 F07 16 - - 14 18 30 - - - -
80 3 180 33,5 205 105 F07 16 - - 14 18 30 - - 18 2
100 4 190 - 225 127 F07 16 - - 14 18 30 - - 48 7
125 5 200 38,0 240 140 F10 18 - - 19 25 35 - - 75 15
150 6 210 - 250 159 F10 18 - - 22 28 40 - - 106 25
200 8 230 - 290 191 F12 20 - - 22 28 40 - - 150 39
250 10 250 - 325 222 F14 22 30 55 - - - - 198 56
300 12 270 - 375 260 F16 26 40 75 - - - 80 6 - -
350 14 290 - 405 296 F16 26 40 75 - - - 154 20 99 8
400 16 310 - 440 324 F25 30 50 85 - - - 219 36 182 24
450 18 330 - 475 356 F25 30 60 80 - - - 291 57 257 43
500 20 350 - 510 392 F30 34 60 80 - - - 329 68 293 53
600 24 390 - 585 475 F30 34 70 105 - - - 425 96 394 80
Face-to-face length
The dimensions of the DANAÏS MT II Class 300 valve with flanged body comply with ISO 5752-14 and EN 558-1-14.
Variants
ACTELEC electric actuator ACTO hydraulic actuator DANAÏS HT valve
Notes on installation
Connections
The valves can be installed between flanges to EN 1092-1 PN
25, PN 40 and ASME B16.5 Class 300 (other line connections on
request).
NOTE: The line connection to ISO 7005 PN 50 is discontinued,
line connections to ASME B16.5 Class 300 should preferably be
used.
Full-lug body - T4
DN NPS EN 1092 PN 25 EN 1092-1 PN 40 ISO 7005 PN 50 ASME B 16.5 Class 300
50 2 ✔ ✔ ✔ ✔
65 2½ ✔ ✔ ✔ ✔
80 3 ✔ ✔ ✔ ✔
100 4 ✔ ✔ ✔ ✔
125 5 ✔ ✔ ✔ ✔
150 6 ✔ ✔ ✔ ✔
200 8 ✔ ✔ ✔ ✔
250 10 ✔ ✔ ✔ ✔
300 12 ✔ ✔ ✔ ✔
350 14 ☎ ☎ ✔ ✔
400 16 ✔ ✔ ✔ ✔
450 18 ✔ ✔ ☎ ☎
500 20 ☎ ☎ ✔ ✔
600 24 ☎ ☎ ✔ ✔
Description
Symbol Description
✔ Installation possible
☎ Contact KSB.
Flanged body - T7
DN NPS EN 1092 PN 25 EN 1092-1 PN 40 ISO 7005 PN 50 ASME B 16.5 Class 300
50 2 ✔ ✔ ✔ ✔
65 2½ ✔ ✔ ✔ ✔
80 3 ✔ ✔ ✔ ✔
100 4 ✔ ✔ ✔ ✔
125 5 ✔ ✔ ✔ ✔
150 6 ✔ ✔ ✔ ✔
200 8 ✔ ✔ ✔ ✔
250 10 ✔ ✔ ✔ ✔
300 12 ✔ ✔ ✔ ✔
350 14 ✔ ✔ ✔ ✔
400 16 ✔ ✔ ✔ ✔
450 18 ✔ ✔ ✔ ✔
500 20 ✔ ✔ ✔ ✔
600 24 ✔ ✔ ✔ ✔
Description
Symbol Description
✔ Installation possible
☎ Contact KSB.
Flange dimensions
The DANAÏS MT II valves can be installed between all commercial mating flanges and line connections using standard gaskets or
serrated gaskets.
DN NPS Wafer-type body with flat faces - Full-lug body Flanged body - T7
T1
- T4
Ø1 Ø2 Ø3 Ø1 Ø2 Ø3 Ø1 Ø2 Ø3
50 2 93 61 73 92,1 61 73 92,1 71 73
65 2½ 117 73 91 104,8 73 91 104,8 88 91
80 3 127 90 106 127 89 106 127 100 106
100 4 157 114 128 157,2 114 128 157,2 120 128
125 5 185,7 141 148 185,7 141 148 185,7 144 148
150 6 215,9 168 173 215,9 168 173 215,9 167 173
200 8 269,9 220 226 269,9 220 226 269,9 220 226
250 10 323,8 273 273 323,8 273 273 323,8 281 273
300 12 381 327 330 381 327 330 381 324 323
350 14 412,8 382 385 412,8 382 385 412,8 382 373
400 16 470 433 438 470 433 438 470 422 423
450 18 533,4 494 498 533,4 494 498 533,4 489 487
500 20 584,2 536 538 584,2 536 538 584,2 528 526
600 24 692,2 639 640 692,2 639 640 692,2 625 622
Full-lug body - T4
Bolt length for tapped lugs A1 max = e + X + j Bolt length at stem passage
A2max = e + Y + j
The drawings do not indicate the exact product design (number of tapped lugs).
Full-lug body - T4
DN NPS d1 EN 1092-1 PN 25 EN 1092-1 PN 40 Weight
ØM Bolt A1 Bolt A2 ØM Bolt A1 Bolt A2
X Qty** Y Qty** X Qty** Y Qty** [kg]
50 2 120 M16 20 4 - - M16 20 4 - - 6,5
65 2½ 130 M16 21 8 - - M16 21 8 - - 7,5
80 3 188 M16 23 8 - - M16 23 8 - - 8,8
100 4 210 M20 26 8 - - M20 26 8 - - 11,2
125 5 246 M24 29 8 - - M24 29 8 - - 15,4
150 6 270 M24 29 8 - - M24 29 8 - - 18,5
200 8 310 M24 34 12 - - M27 34 8 - - 30
250 10 417 M27 40 12 - - M30 40 12 - - 48
300 12 478 M27 45 12 23 4 M30 45 12 23 4 70
350 14 523 - - - - - - - - - - 99,5
400 16 606 M33 53 12 41 4 M36 58 12 42 4 130
450 18 630 M33 52 16 28 4 M36 57 16 27 4 167
500 20 716 - - - - - - - - - - 237
600 24 834 - - - - - - - - - - 363
Flanged body - T 7
A2
B2 Y
OR
A3 max. = e + i + j
The drawings do not indicate the exact product design (number of tapped lugs/tapped holes/through-holes).
Flanged body - T7
DN NPS d1 E1 EN 1092-1 PN 25 EN 1092-1 PN 40 Weight
ØM Bolt A1 Bolt A2 Bolt A3 ØM Bolt A1 Bolt A2 Bolt A3
f Qty** X Qty** i Qty** f Qty** X Qty** i Qty** [kg]
50 2 152 25,6 M16 - - - - 22 4 M16 - - - - 22 4 10
65 2½ 178 28,6 M16 - - - - 25 8 M16 - - - - 25 8 13
80 3 190 31,5 M16 - - - - 27 8 M16 - - - - 27 8 16
100 4 229 35 M20 - - - - 30 8 M20 - - - - 30 8 23,5
125 5 254 38,2 M24 - - - - 35 8 M24 - - - - 35 8 27,5
150 6 279 39,8 M24 - - - - 36 8 M24 - - - - 36 8 32
200 8 343 44,3 M24 - - - - 36 12 M27 32 8 40 4 - - 52
250 10 406 51 M27 - - - - 40 12 M30 35 8 45 4 - - 73
300 12 483 54 M27 - - - - 40 16 M30 35 12 45 4 - - 115
350 14 535 58 M30 - - - - 45 16 M33 38 12 49 4 - - 147
400 16 600 60,4 M33 - - - - 49 16 M36 42 12 54 4 - - 207
450 18 635 63,7 M33 - - - - 49 20 M36 - - - - 54 20 243
500 20 700 68,3 M33 - - - - 49 20 M39 - - - - 58 20 335
600 24 826 74,7 M36 - - - - 54 20 M45 52 16 67 4 - - 463
KSB S.A.S.
4, allée des Barbanniers • 92635 Gennevilliers Cedex (France)
Tél. +33 1 41 47 75 00 • Fax +33 1 41 47 75 10 • www.ksb.com