Professional Documents
Culture Documents
SURFAKLEN 395
MATERIAL SAFETY DATA SHEET
Date: 06 – 04 – 2012
Replacing MSDS dt.
Page: 1 / 3
M A T E R I A L D A T A S A F E T Y S H E E T
Product details
Supplier details:
Kun-Chem Pretreatments Pvt. Ltd.,
20, Jagdish Industrial Estate,
Vartaknagar, Thane – 400 606
Maharashtra, India.
Tel: 022 25883055
Fax: 022 25365003
2. Composition/information on ingredients
3. Hazards identification
General information
Remove soiled or soaked clothing immediately
After contact with skin
In case of contact with skin wash off immediately with plenty of water
After contact with eyes
In case of contact with eyes rinse thoroughly with plenty of water and seek
medical advice
After ingestion
Avoid vomiting. Patient should drink plenty of water. Summon a doctor
immediately.
5. Fire-fighting measures
Handling
Advice on safe handling
Ensure adequate ventilation.
Avoid contact with open flame or ignition source
Take precautionary measures against electrostatic loading.
Storage
The product should be stored at a temperature of 5-40°C
Storage in closed HDPE woven lined bags
Application only in steel or stainless steel containers
Form: Powder
Colour: Pale
Odour: Slight or weak
Changes in physical state
Boiling temperature (Method: DIN 53171) Not Applicable
Flash point (Method: DIN 51758) Not Applicable
Ignition temperature: Not Applicable
Density at 20°C (Method: DIN 51757) Not Applicable
Solubility in water at 20°C: Miscible
pH value (10g/L): > 12
Viscosity dynamic: (Method: DIN 51562) Not Applicable
Thermal decomposition
Not tested.
Product
In accordance with current regulations may be taken to waste disposal site or
Incineration plant, after consultation with site operator and/or with the responsible
authority.
Road transport
Observe safety and transport rules and regulations as per central, state and local
authorities.
This information is based on our present state of knowledge. It should not therefore be construed as
guaranteeing specific properties of the products described or their suitability for a particular application.
We believe the statements, technical information and recommendations contained herein are reliable,
but they are given without warranty or guarantee of any kind, expressed or implied, and we assume no
responsibility for any loss, damage, or expense, direct or consequential, arising out of their use. The
information shall not be regarded as legally binding assurance of certain properties or suitability for a
particular application.