Professional Documents
Culture Documents
CLASS TEST
SUBJECT: MD-II (ETME-302) MAX. MARKS: 30 TIME: 1HR
SECTION T13
Draft saved
*Required
Email *
abku1994@gmail.com
Name *
ABHISHEK KUMAR
Roll No. *
00115608220
Email *
abku1994@gmail.com
Quiz Questions
1. ___________ supports the load acting perpendicular to the axis of the shaft. *
Thrust bearing
Bush bearing
Radial bearing
Bush bearing
Modulus bearing
Thrust bearing
3.Surface of shaft slide over surface of the bush resulting in friction and wear. *
A. TRUE
B. FALSE
A one
A. one
B. two
C. three
D. four
C. Cylindrical load bearing has lower load capacity as compared to deep groove ball
bearing.
A. Yes
B. No
A. TRUE
B. FALSE
(A) Minimum life that 90% of the bearings will reach or exceed
16 A deep groove ball bearing rotating at 1200 r.p.m. is subjected to radial and *
an axial force of 2000 N and 1500 N respectively. What will be the basic
dynamic capacity of bearing if 20,000 hours is the rating life?(Consider radial
factor = 0.55, Thrust factor = 2 & application factor = 1.5?
a. 69.448 kN
b. 54.498 kN
c. 50.236 kN
d. 12.726 kN
a. 3461.53 N
b. 5000 N
c. 5850 N
d. Insufficient data
a. 0.0785 kW
b. 0.0392 kW
c. 0.0526 W
d 0 0236 W
d. 0.0236 W
a) True
b) No
d) Doesn’t matter
a) 1
b) 2
c) 3
d) 4
a) 7mm
b) 8mm
c) 9mm
d) 10mm
22 Connecting rod is subjected to which type of force during buckling? *
a) Axial strain
b) Shear stress
c) Tensile force
d) Compressive force
a) Cylinder
b) Cylinder head
c) Piston
d) Crankshaft
a) XX- axis
b) YY-axis
c) ZZ-axis
d) XY-axis
25 Find the force acting on the piston when the force acting on connecting rod *
is 40N and the angle of inclination is 20°?
a) 35N
b) 30KN
c) 37.5N
d) 40KN
26 Find the cross-sectional area of the connecting rod when the thickness of *
the web is 15mm?
a) 2651mm2
b) 1265mm2
c) 2475mm2
d) 2561mm2
a) Splash system
c) Lift system
d) Feed system
28 Maximum side thrust is experienced during which stroke? *
a) Intake stroke
b) Exhaust stroke
c) Expansion stroke
d) Suction stroke
29 Calculate the empirical relationship for the length of the piston skirt when *
D=80mm?
a) 20 to 40mm
b) 35 to 70mm
c) 52 to 64mm
d) 43 to 57mm
30 Calculate the empirical relationship for the length of the piston when *
D=80mm?
a) 60 t0 90mm
b) 80 to 120mm
c) 70 to 100mm
d) 90 to 110mm
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy
Forms