Professional Documents
Culture Documents
Cisco dCloud
Cisco Data Center Network Manager 11.5 for Traditional Networks v1
1
CSR-1 CSR-2
10.10.50.0/24 gi5 gi2 gi2
10.10.20.1-2/24
Web Host gi4 gi3
10.10.50.10/24
10.10.60.1-2/24
10.10.40.1-2/24 OSPF
1/5 1/5
Spine-1 Spine-2
1/1 1/1 VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/2 1/2
1/4 1/4
6
Configuring vPC Domain 200
Field Peer-1 Peer-2
vPC Domain ID 200 200
vPC Keep-alive Local IP Address 198.18.4.201 198.18.4.202
vPC Keep-alive VRF Name Management Management
Peer Link Port Channel ID 200 200
Peer Link Member Interfaces e1/1, e1/2 e1/1, e1/2
Port Channel Mode Active Active
Peer Link Port Channel Description Link to Spine-2 Link to Spine-1
1/5 1/5
Spine-1 Spine-2
1/1 1/1 VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200
1/2 1/2 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4 1/4
Configuring vPC Domain 200
Spine-1 Po 200 Spine-2
1/1 1/1 VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/2 1/2
198.18.4.201 198.18.4.202
Spine-1 Spine-2
# feature vpc # feature vpc
# feature lacp # feature lacp
# vpc domain 200 # vpc domain 200
# peer-keepalive destin 198.18.4.202 # peer-keepalive destin 198.18.4.201 source
198.18.4.202
source 198.18.2.201
# int e1/1-2 # int e1/1-2
# channel-group 200 force mode active # channel-group 200 force mode active
# no shut # no shut
# int po200 # int po200
# description Link to Spine-2 # description Link to Spine-1
# switchport mode trunk # switchport mode trunk
# vpc peer-link # vpc peer-link
# no shut # no shut
Verifying vPC Domain 200
Spine-1 Po 200 Spine-2
1/1 1/1 VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/2 1/2
198.18.4.201 198.18.4.202
Spine-1 Spine-2
# feature vpc # feature vpc
# feature lacp # feature lacp
# vpc domain 200 # vpc domain 200
# peer-keepalive destin 198.18.4.202 # peer-keepalive destin 198.18.4.201 source
198.18.4.202
source 198.18.2.201
# int e1/1-2 # int e1/1-2
# channel-group 200 force mode active # channel-group 200 force mode active
# no shut # no shut
# int po200 # int po200
# description Link to Spine-2 # description Link to Spine-1
# switchport mode trunk # switchport mode trunk
# vpc peer-link # vpc peer-link
# no shut # no shut
Configuring vPC Domain 100
Field Peer-1 Peer-2
vPC Domain ID 100 100
vPC Keep-alive Local IP Address 198.18.4.101 198.18.4.102
vPC Keep-alive VRF Name Management Management
Peer Link Port Channel ID 100 100
Peer Link Member Interfaces e1/1, e1/2 e1/1, e1/2
Port Channel Mode Active Active
Peer Link Port Channel Description Link to Leaf-2 Link to Leaf-1
1/5 1/5
Leaf-1 Leaf-2
1/1 1/1
vPC Domain 100
1/2 1/2
1/4 1/4
Configuring vPC Domain 100
Leaf-1 Po100 Leaf-2
1/1 1/1
vPC Domain 100
1/2 1/2
198.18.4.101 198.18.4.102
Leaf-1 Leaf-2
# feature vpc # feature vpc
# feature lacp # feature lacp
# vpc domain 100 # vpc domain 100
# peer-keepalive destin 198.18.4.102 # peer-keepalive destin 198.18.4.101
source 198.18.4.102
source 198.18.4.101
# int e1/1-2
# int e1/1-2
# channel-group 100 force mode active # channel-group 100 force mode active
# no shut
# no shut
# int po100 # int po100
# description Link to Leaf-1
# description Link to Leaf-2
# switchport mode trunk
# switchport mode trunk
# vpc peer-link
# vpc peer-link
# no shut # no shut
Configuring vPC Domain 100
Leaf-1 Po100 Leaf-2
1/1 1/1
vPC Domain 100
1/2 1/2
198.18.4.101 198.18.4.102
Leaf-1 Leaf-2
# feature vpc # feature vpc
# feature lacp # feature lacp
# vpc domain 100 # vpc domain 100
# peer-keepalive destin 198.18.4.102 # peer-keepalive destin 198.18.4.101
source 198.18.4.101 source 198.18.4.102
# int e1/1-2 # int e1/1-2
# channel-group 100 force mode active # channel-group 100 force mode active
# no shut # no shut
# int po100 # int po100
# description Link to Leaf-2 # description Link to Leaf-1
# switchport mode trunk # switchport mode trunk
# vpc peer-link # vpc peer-link
# no shut # no shut
Configure the interfaces between the Spines and the Leafs
Spine-1 Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4 1/4
Spine-1 Spine-2
# int e1/3-4 # int e1/3-4
# channel-group 20 force mode active # channel-group 20 force mode active
# no shut # no shut
# int po20 # int po20
# switchport mode trunk # switchport mode trunk
# vpc 20 # vpc 20
# no shut # no shut
Configure the interfaces between the Spines and the Leafs
Spine-1 Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4 1/4
Po20
1/5 1/5 Leaf-2
Leaf-1
Leaf-1 Leaf-2
# int e1/5-6 # int e1/5-6
# channel-group 20 force mode active # channel-group 20 force mode active
# no shut # no shut
# int po20 # int po20
# switchport mode trunk # switchport mode trunk
# vpc 20 # vpc 20
# no shut # no shut
Verify thestatus
Verify vPC Status – Leaf Switches
leaf switches
Spine-1 Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4 1/3 1/3 1/4
Leaf-1 Leaf-2
# int e1/5-6
# int e1/5-6
# channel-group 20 force mode active
# channel-group 20 force mode active
# no shut
# no shut
# int po20
# int po20
# switchport mode trunk
# switchport mode trunk
# vpc 20
no shut # vpc 20
#
# no shut
Verify the vPC Status – Spine Switches
Spine-1 Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4 1/3 1/3 1/4
Spine-1 Spine-2
# int e1/3-4 # int e1/3-4
# channel-group 20 force mode active # channel-group 20 force mode active
# no shut # no shut
# int po20 # int po20
# switchport mode trunk # switchport mode trunk
# vpc 20 # vpc 20
# no shut # no shut
2. Configuring the VLAN
Interface with HSRP
• Enable features
• Configure HSRP
Configuring the VLAN Interface 10 with HSRP
Spine-1 Spine-2
1/1 1/1 VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/2 1/2
Spine-1 Spine-2
# vlan 10, 20 # vlan 10, 20
# feature interface-vlan # feature interface-vlan
# feature hsrp # feature hsrp
# interface vlan 10 # interface vlan 10
# ip add 10.10.10.1/24 # ip add 10.10.10.2/24
# hsrp 10 # hsrp 10
# ip 10.10.10.254 # ip 10.10.10.254
# priority 50 # priority 100
# preempt # preempt
# exit # exit
# no shut # no shut
# copy run start # copy run start
Verifying interface Vlan 10 with HSRP
Spine-1 Spine-2
1/1 1/1 VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/2 1/2
Spine-1
Spine-2
Configuring the VLAN Interface 20 with HSRP
Spine-1 Spine-2
1/1 1/1 VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/2 1/2
Spine-1 Spine-2
# interface vlan 20 # interface vlan 20
# ip add 20.20.20.1/24 # ip add 20.20.20.2/24
# hsrp 20 # hsrp 20
# ip 20.20.20.254 # ip 20.20.20.254
# priority 50 # priority 100
# preempt # preempt
# exit # exit
# no shut # no shut
# copy run start # copy run start
Verifying the VLAN Interface 20 with HSRP
Spine-1 Spine-2
1/1 1/1 VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/2 1/2
Spine-1 Spine-2
3. Configuring OSPF between
CRSs and Spines
• Configure OSPF for the interfaces on Spine-1 and Spine-2 towards the CSRs
CSR-1 CSR-2
10.10.50.0/24 gi5 gi2 gi2
10.10.20.1-2/24
Web Host gi4 gi3
10.10.50.10/24
10.10.60.1-2/24
10.10.40.1-2/24 OSPF
1/5 1/5
1/5 1/5
vmnic2
vmnic1
VLAN 20
VLAN 10 - Access LACP
Non-LACP Trunk
ESXi-1 Server-3
Server-1 20.20.20.20 10.10.10.10/24
Server-2 20.20.20.50
Configuring OSPF Between CSRs and the Spines
gi2 gi2
gi4 gi3
10.10.40.1-2/24 10.10.60.1-2/24
1/5 OSPF 1/5
Spine-1 Spine-2
Spine-1 Spine-2
# feature ospf # feature ospf # int e1/6
# router ospf 100 # router ospf 100 # ip address 10.10.30.2/24
# router-id 1.1.1.1 # router-id 2.2.2.2 # mtu 1500
# int loop0 # int loop0 # ip router ospf 100 area 0
# ip add 1.1.1.1/32 # ip add 2.2.2.2/32 # ip ospf network point-to-
# ip router ospf 100 area 0 # ip router ospf 100 area 0 point
# ip ospf network point-to-point # ip ospf network point-to- # no shut
# no shut point
# no shut
# int e1/5
# ip address 10.10.40.2/24 # int e1/5
# mtu 1500 # ip address 10.10.60.2/24
# ip router ospf 100 area 0 # mtu 1500
# ip ospf network point-to-point # ip router ospf 100 area 0
# no shut # ip ospf network point-to-
point
# no shut
Configuring OSPF Between CSRs and the Spines
gi2 gi2 CSR-2
CSR-1
gi4 gi3
10.10.40.1-2/24 10.10.60.1-2/24
1/5 OSPF 1/5
Spine-1 Spine-2
CSR-1 CSR-2
# int gig3 # int gig3
# ip ospf network point-to-point # ip ospf network point-to-point
# no shut # no shut
# int gig4
# ip ospf network point-to-point
# no shut
Verification
gi2 gi2
gi4 gi3
10.10.40.1-2/24 10.10.60.1-2/24
1/5 OSPF 1/5
Spine-1 Spine-2
Spine-1 Spine-2
# show ip ospf neighbor
4. Configuring VMM
• VMM Integration with DCNM (follow dCloud indications)
• Configure OSPF for the interfaces on Spine-1 and Spine-2 towards the CSRs
CSR-1 CSR-2
10.10.50.0/24 gi5 gi2 gi2
10.10.20.1-2/24
Web Host gi4 gi3
10.10.50.10/24
10.10.60.1-2/24
10.10.40.1-2/24 OSPF
1/5 1/5
Spine-1 Spine-2
1/1 1/1 VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/2 1/2
1/4 1/4
6
1/5 / 1/6 1/5
1/5 1/5
vmnic2
vmnic1
VLAN 20
VLAN 10 - Access LACP
Non-LACP Trunk
ESXi-1 Server-3
Server-1 20.20.20.20 10.10.10.10/24
Server-2 20.20.20.50
Advertise the VLAN interface to OSPF
Spine-1 Po 200 Spine-2
1/1 1/1 VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
vPC Domain 200 VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/2 1/2
198.18.4.201 198.18.4.202
Spine-1 Spine-2
# interface vlan 20 # interface vlan 20
# ip add 20.20.20.1/24 # ip add 20.20.20.2/24
# no ip redirect # no ip redirect
# ip router ospf 100 area 0 # ip router ospf 100 area 0
# no shut # no shut
CSR-1 CSR-2
10.10.50.0/24 gi5 gi2 gi2
10.10.20.1-2/24
Web Host gi4 gi3
10.10.50.10/24
10.10.60.1-2/24
10.10.40.1-2/24 OSPF
1/5 1/5
1/5 1/5
1/5 1/5
Leaf-1 Leaf-2
# int e1/3 # int e1/4
# channel-group 55 force mode active # channel-group 55 force mode active
# no shut # no shut
# int po55 # int po55
# switchport mode trunk # switchport mode trunk
# vpc 55 # vpc 55
# no shut # no shut
Verification: vPC
Leaf-1 Leaf-2
# int e1/3 # int e1/4
# channel-group 55 force mode active # channel-group 55 force mode active
# no shut # no shut
# int po55 # int po55
# switchport mode trunk # switchport mode trunk
# vpc 55 # vpc 55
# no shut # no shut
Advertise VLAN 10 in OSPF on Spine-1 & Spine-2
CSR-1 CSR-2
10.10.50.0/24 gi5 gi2 gi2
10.10.20.1-2/24
Web Host gi4 gi3
10.10.50.10/24
10.10.60.1-2/24
10.10.40.1-2/24 OSPF
1/5 1/5
Spine-1 Spine-2
# interface vlan 10 # interface vlan 10
# ip router ospf 100 area 0 # ip router ospf 100 area 0
# no shut # no shut
Verification: Reachability from Server 3 to HSRP Gw
6
1/5 1/ 1/6 1/5
6
1/5 1/ 1/6 1/5