Professional Documents
Culture Documents
By using the figure below, reproduce this by using the relative rectangular coordinate entry. You
can choose at what point you will start and what pattern you will made.
EASY MODE
EASY MODE:
Command Line. Type "L", then ENTER.
Type 0,0 then ENTER (first point of the line) (Point A)
Type @64<90, then ENTER (line AB)
Type @50<30, then ENTER (BC)
Type @50<330, then ENTER(CD)
Type @64<270, then ENTER (DE)
Type @25<210, then ENTER (EF)
Type @25<150, then ENTER (FG)
Type @25<210, then ENTER (GH)
Type @25<150, then ENTER 2 times (HA) (or type C, then ENTER to close the drawing)
Type L, then ENTER. Click point H, then type @64<90, then ENTER
Type @25<30, then ENTER
Type @25<330, then ENTER
Type @25<30, then ENTER 2 times
Type L, then ENTER. Click point G, then type @64< 90, then ENTER 2 times
Type L, then ENTER. Click point F, then type @64<90, then ENTER 2 times
Type L, then ENTER. Click point B, then type @25<330, then ENTER 2 times
MODERATE
MODERATE
Type "L", then ENTER.
Select First point
Type @6<30, then ENTER
Type @2<90, then ENTER
Type @14<150, then ENTER
Type @6<210, then ENTER
Type @2<270, then ENTER
Type @14<370, then ENTER
Type @2<90
Type @6<30, then ENTER 2 times
Command Line. Type "L", then ENTER click point X then type @14<150, then ENTER 2
times
Command Line. Type "L", then ENTER click point X then ENTER
Enter
Type @2<90, then ENTER
Type @2<150, then ENTER
Type @3<90, then ENTER
Type @4<150, then ENTER
Type @6<210, then ENTER
Type @2<270, then ENTER
Type @4<330, then ENTER
Type @4<30, then ENTER
Type @1<270, then ENTER
Type @2<330, then ENTER
Type @2<270, then ENTER
Type @2<30, then ENTER
Command Line. Type "L", then ENTER click point X then type @4<150, then ENTER
Type @6<30, then ENTER 2 times
Command Line. Type "L", then ENTER click point X then type @2<270, then ENTER 2 times
Command Line. Type "L", then ENTER click point X then type @4<30 , then ENTER 2 times
Command Line. Type "L", then ENTER click point X then type @2<30 , then ENTER 2 times