Professional Documents
Culture Documents
9696
W & O Supply, Inc. (W&O) warranties all SPACE Valve Products for a period of 12 months from the
invoice date. Warranty provides for the repair or replacement of material, if deemed defective. This
warranty applies to only SPACE valves sold directly by W&O to original purchaser, this warranty does
not apply to resellers of used or rebuilt SPACE Valves.
W&O warrants against defects and/or workmanship each product sold by them under the following
terms and conditions:
• Product was under normal use and service at all times. The product was not at any time
misused, operated beyond design capabilities or used for any purpose other than that for which it
was intended.
• There has been no modifications or changes in design or function after leaving W&O facility(ies).
• Warranty claim must be made within the one (1) year period from date of shipment from W&O to
Purchaser.
• Purchaser assumes all risk in selection of the product. It is the responsibility of the Purchaser to
have received knowledgeable advice when selecting product type, material construction, etc.
• Purchaser is obligated to notify W&O promptly of any claimed defect, and shall be responsible
for the return to W&O of all claimed defective product or parts. W&O shall have the right to
inspect the product to determine obligation, prior to any settlement of provisions herein.
• Providing that the foregoing Warranty conditions have been met, W&O’s obligation shall be
limited to either the repair of the product, f.o.b. W&O, Jacksonville, Florida or the replacement of
any part(s) with proven defective workmanship or materials.
• W&O shall not be held responsible for any consequential loss or incidental damages, personal
injury, damages for loss of use, lost profit, work, production or any other damages in connection
with this Warranty.
• If the valve has failed due to conditions other than those identified in this warranty agreement,
the cost to re-supply the new valve will then be billed to the account of original purchaser.
2 800.962.9696
www.wosupply.com 3
NRS GATE VALVE
150 LB
BRONZE TRIM
APPLICABLE STANDARDS
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
DIMENSIONS IN INCHES:
SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L Face to Face RF 7 7.5 8 8.5 9 10 10.5 11.5 13 14 15 16 17 18 20
H Height (Open) 12.9 15 15.5 17.6 18.6 22 23.2 27.6 31.35 34.5 37.6 43.75 47.3 54.4 64
W Handwheel Diam. 8 8 10 10 10 12 12 14 15.75 17.75 19.75 21.65 23.65 27 30
Weight (lbs) 49 68 87 108 119 199 243 354 534 778 1043 1310 1600 1950 2250
4 800.962.9696
NRS GATE VALVE
150 LB
CR13/HF TRIM
APPLICABLE STANDARDS
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
* All 15021C Valves provided with John Crane 1065 Stem Packing Rings
DIMENSIONS IN INCHES:
SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L Face to Face RF 7 7.5 8 8.5 9 10 10.5 11.5 13 14 15 16 17 18 20
H Height (Open) 12.9 15 15.5 17.6 18.6 22 23.2 27.6 31.35 34.5 37.6 43.75 47.3 54.4 64
W Handwheel Diam. 8 8 10 10 10 12 12 14 15.75 17.75 19.75 21.65 23.65 27 30
Weight (lbs) 49 68 87 108 119 199 243 354 534 778 1043 1310 1600 1950 2250
www.wosupply.com 5
OS&Y GATE VALVE
150 LB
BRONZE TRIM
APPLICABLE STANDARDS
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
DIMENSIONS IN INCHES:
SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L Face to Face RF 7 7.5 8 8.5 9 10 10.5 11.5 13 14 15 16 17 18 20
H Height (Open) 15.37 17.25 19 21 23 25.5 30.12 37.65 45.25 53.25 59.4 67 74.5 83.5 98.5
H Height (Closed) 13 15 15.5 17.6 18.6 22 23.75 29 34.6 40.5 45.3 51 56.3 63.25 74
W Handwheel Diam. 8 8 10 10 10 12 12 14 15.75 18 19.75 21.65 23.62 26.75 30
Weight (lbs) 44 62 79 98 108 181 221 322 485 706 948 1191 1502 1940 3109
6 800.962.9696
OS&Y GATE VALVE
150 LB
CR13/HF TRIM
APPLICABLE STANDARDS
Steel Gate Valves API 600
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
DIMENSIONS IN INCHES:
SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L Face to Face RF 7 7.5 8 8.5 9 10 10.5 11.5 13 14 15 16 17 18 20
H Height (Open) 15.37 17.25 19 21 23 25.5 30.12 37.65 45.25 53.25 59.4 67 74.5 83.5 98.5
H Height (Closed) 13 15 15.5 17.6 18.6 22 23.75 29 34.6 40.5 45.3 51 26.3 63.25 74
W Handwheel Diam. 8 8 10 10 10 12 12 14 15.75 18 19.75 21.65 23.62 26.75 30
Weight (lbs) 44 62 79 98 108 181 221 322 485 706 948 1191 1502 1940 3109
www.wosupply.com 7
OS&Y GATE VALVE
300-600-900-1500 LB
CR13/HF TRIM
APPLICABLE STANDARDS
Steel Gate Valves API 600
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14”* 16”* 18”* 20”* 24”*
L Face to Face RF 11.5 13 14 15 17 20 22 26 31 33 35 39 43 47 55
H Height (Open) 16.5 18.75 20.5 25.5 25.5 30.25 33 40.25 48.5 57 61.75 70.75 75.5 87 101.5
H Height (Closed) 14 15.75 17 21 21 24.75 26.5 32 38 44.5 61.75 70.75 75.5 87 101.5
W Handwheel Diam. 8 10 10 12 12 16 18 20 24 27 24 24 24 24 24
Weight (lbs) 90 128 195 290 290 400 560 910 1370 1960 2740 3365 4330 5390 7965
*Sizes are provided with gear operator, as seen on page 23. Dimension is valve height from center of waterway bore including operator.
900 LB DIMENSIONS IN INCHES:
8 800.962.9696
GLOBE VALVE
150 LB
BRONZE TRIM
APPLICABLE STANDARDS
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
DIMENSIONS IN INCHES:
www.wosupply.com 9
GLOBE VALVE
150 LB
CR13/HF TRIM
APPLICABLE STANDARDS
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
DIMENSIONS IN INCHES:
10 800.962.9696
GLOBE VALVE
300-600-900-1500 LB
CR13/HF TRIM
APPLICABLE STANDARDS
Steel Gate Valves API 600
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
DIMENSIONS IN INCHES:
12 800.962.9696
ANGLE VALVE
150 LB
CR13/HF TRIM
APPLICABLE STANDARDS
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
DIMENSIONS IN INCHES:
www.wosupply.com 13
ANGLE VALVE
300-600-900-1500 LB
CR13/HF TRIM
APPLICABLE STANDARDS
Steel Gate Valves API 600
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
SIZE 3” 4” 5” 6” 8” 10”
L Face to Face RF 7.5 9 11 12 14.5 16.5
H Height (Open) 30 31 35 48 55 64
W Handwheel Diam. 16 20 20 24 30 30
Weight (lbs) 255 480 785 1150 1820 3100
SIZE 2” 2-1/2” 3” 4” 5” 6” 8”
L Face to Face RF 7.25 8.25 9.25 10.75 13.25 13.87 19.5
H Height (Open) 27.5 28.5 30 38 45 53.5 64
W Handwheel Diam. 14 16 20 24 28 30 36
Weight (lbs) 210 315 410 670 1010 1240 2100
14 800.962.9696
9, 10, 11
12, 13, 14
www.wosupply.com 15
SWING CHECK VALVE
150 LB
BRONZE TRIM
APPLICABLE STANDARDS
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
DIMENSIONS IN INCHES:
SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L Face to Face RF 8 8.5 9.5 10.5 11.5 13 14 19.5 24.5 27.5 31 34 38.5 38.5 51
H Height 6 6.5 7.5 8.5 9 9.5 10.5 13 14 15 17.5 19 23 24 29
Weight (lbs) 41 53 72 92 98 138 174 305 460 620 860 990 1380 1710 2620
16 800.962.9696
SWING CHECK VALVE
150 LB
CR13/HF TRIM
APPLICABLE STANDARDS
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
DIMENSIONS IN INCHES:
SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L Face to Face RF 8 8.5 9.5 10.5 11.5 13 14 19.5 24.5 27.5 31 34 38.5 38.5 51
H Height 6 6.5 7.5 8.5 9 9.5 10.5 13 14 15 17.5 19 23 24 29
Weight (lbs) 41 53 72 92 98 138 174 305 460 620 860 990 1380 1710 2620
www.wosupply.com 17
SWING CHECK VALVE
300-600-900-1500 LB
CR13/HF TRIM
APPLICABLE STANDARDS
Steel Gate Valves API 600
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
18 800.962.9696
16, 17, 18
12, 13, 14
16, 17, 18
www.wosupply.com 19
BELLOW SEAL GATE
150 LB
CR13/HF TRIM
BELLOW MATERIALS - SS316 or Inconel
APPLICABLE STANDARDS
Steel Valves, ANSI B16.34-1977, Standard Class
Face-to-face, End-to-end, ANSI B16.10
End Flanges, ANSI B16.5
Weld Ends, ANSI B16.25
FIGURE 15011C-BS
PART MATERIALS ASTM SPEC.
Body Cast steel A216 Gr. WCB
Bonnet Cast steel A216 Gr. WCB
Yoke Cast steel A216 Gr. WCB
Wedge Cast steel A216 Gr. WCB
Wedge facing CR13 A276 TY 410
Seat ring CR13 A105/HF Overlay
Stem CR13 A276 TY 410
Yoke nut Ductile iron A439 TY D2
Yoke nut Retainer Carbon steel A216 Gr. WCB
Gland CR13 A276 TY 410
Gland flange Cast steel A216 Gr. WCB
Gland eyebolt Steel A193-B7
Gland eyebolt nut Steel A194-2H
Bonnet stud bolt Steel A193-B7
Bonnet stud bolt nut Steel A194-2H
Bonnet gasket Reinforced graphite Commercial
Stem packing Graphite Commercial
Bellows Stainless steel or Inconel Gr. 316 or Inconel
Handwheel Ductile iron A395
Handwheel nut Steel A194-2H
DIMENSIONS IN INCHES:
20 800.962.9696
MANIFOLD VALVE CHEST
SUCTION & DISCHARGE TYPE
150 LB
• Cast Steel ASTM A216 Construction
• Aluminum Bronze Trim
• 2 to 6 Valves
• All valves have same bore size, but the suction and discharge
connection may be chosen 1 or 2 sizes larger than valve bore
• Available in sizes 2” to 8”
• Fixed Disc Connection or Stop Check (SDNR)
LOCATIONS
Alabama Tampa South Carolina Washington
Mobile 1902 B 43rd St. N. Charleston Seattle
4766 Rangeline Rd. Tampa, FL 33605 1670 Drydock Ave Building #9 7745 1st Ave. S.
Mobile, AL 36619 Tel: 813.248.4139 North Charleston, SC 29405 Seattle, WA 98106
Tel: 251.433.2816 tampa.fl@wosupply.com Tel: 843.747.6347 Tel: 206.223.0584
mobile.al@wosupply.com charleston.sc@wosupply.com seattle.wa@wosupply.com
Louisiana
California New Orleans Texas Canada
San Diego 4800 River Road Houston Vancouver
VAC Jefferson, LA 70121 8000 Market Street 590 Ebury Place,
2390 Boswell Rd. Tel: 504.733.6350 Ste. 220 Unit #102
Ste. 100 neworleans.la@wosupply.com Houston, TX 77029 Delta, BC V3M 6K7
Chula Vista, CA 91914 Houma Tel: 832.386.9300 Tel: 604.525.9505
Tel: 619.656.7420 101 Capital Blvd. houston.tx@wosupply.com vancouver.bc@wosupply.com
vac@wosupply.com Houma, LA 70360 Virginia Halifax
Long Beach Tel: 985.772.7010 Norfolk 133 Ilsley Avenue, Unit LM
800 West 14th St. houma.la@wosupply.com 5901 Thurston Ave. Dartmouth, NS
Long Beach, CA 90813 Virginia Beach, VA 23455 B3B1S9
Tel: 562.435.6359 New Jersey Tel: 902.481.7333
Linden Tel: 757.217.2800
longbeach.ca@wosupply.com norfolk.va@wosupply.com halifax@wosupply.com
7 West Baltimore Ave.
Florida Linden, NJ 07036
Jacksonville - Corp. Office Tel: 908.486.5338
2677 Port Industrial Drive linden.nj@wosupply.com
Jacksonville, FL 32226
Tel: 904.354.3800 Pennsylvania
corporate@wosupply.com Philadelphia
950 Henderson Blvd.
Ft. Lauderdale Folcroft, PA 19032
3333 S.W. 2nd Ave. Tel: 610.586.8070
Ft. Lauderdale, FL 33315 philadelphia.pa@wosupply.com
Tel: 954.462.8008
ftlauderdale.fl@wosupply.com
wosupply.com
July 2015