Professional Documents
Culture Documents
ASTM A182, Gr. F316L 3000# Min. 1" & Smaller Socket Weld or Threaded
Flanges: ASME CS 150, Backing Flanges, FF, 20" &
ASTM A105, per ASME B16.5 w/HDPE Smaller
Butt-Fused Flange Adapter, Bore to (HDPE)
match
ASTM A182, Gr. 316L 1" & Smaller 150# Slip-on, Socket Weld
Plate:
Valve Body: ASTM A536 20"& Smaller See Valve Notes
Joints:
Pipe joints, excluding flange joints, shall be attached using butt fusion or electrofusion couplings.
Electrofusion couplings shall be of the same material as the pipe and pressure rating equal to or greater than the pipe.
Branch Connections:
Use fabricated fittings only. (See Note 3)
PIPING SPECIFICATION SHEET 2 OF 2
PIPE SPEC: HDPE11 SPEC. NO. REV.
HDPE11 1
2220 Grant Rd PROJECT NO.
Billings, Montana 59102 308062-14308
Telephone: (406) 245-4455
Fax: (406) 245-7112
General Notes:
1. Temp °F Pressure max psig (20 yr life)
50 200
80 188
100 156
140 100
KGA-KG: 20" to 3": Clarkson Model KGA Knife Gate, 316 SS Gate, Gum Rubber Sleeves w/
Retainer Flange, & Manual Operator
KGD-KG: 20" to 2": Clarkson Model KGD Wafer Knife Gate, 316 SS Gate, Gum Rubber Sleeves w/
Manual Operator
HDPE-BF: 2" TO 20": Valve, Butterfly, Class 125, FF, CS Lug-type Body, 316. Disc, 316L SS Shaft
Replaceable BUNA-N Seat Liner and Seals. With Lever-Locking Handle. (ASTM A125 CL B or C)
Bolting Notes:
1. Verify bolting requirements at all flanged connections. Confirm bolting requirements of valve,
equipment, pipe flanges, in-line devices, etc. prior to purchase.