Professional Documents
Culture Documents
Probe Products
Application Guide
Notice
Veeder-Root makes no warranty of any kind with regard to this publication, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose.
Veeder-Root shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this publication.
Veeder-Root reserves the right to change system options or features, or the information contained in this
publication.
This publication contains proprietary information which is protected by copyright. All rights reserved. No part of
this publication may be photocopied, reproduced, or translated to another language without the prior written
consent of Veeder-Root.
Example Illustrations
Illustrations used in this guide for example sensor installations may contain components that are customer
supplied and not included with the sensor. Please check with your Veeder-Root Distributor for recommended
installation accessories.
Probe Description & Aluminum Mag Plus In-Tank Probe for Monitoring Gasoline, Retail
Product Application Diesel Products & Water in both USTs and ASTs
Universal
TLS-450PLUS (8600 Sensor Module Sold Separately
Series) with TLS-XB (USM) Interface (either Factory
64 (32 with BIR) 332812-001 Up to 4 16
installed (3 max per for Probes, Installed or as a
system) Sensors, and Spare Module)
DPLLD
Min/Max
Part # & Description Float Size Cable Lengths
Probe Length
886100-XX0 Mag Plus Phase-Two Separation Float Kit 4” (10.16cm)
846400-3X0 Mag Plus Gasoline Float Kit 3” (7.62cm)
Float Installation Kits 5’ (1.5m),
846400-1X0 Mag Plus Gasoline Float Kit 2” (5.08cm) 48” (1.2m) -
10’ (3.05m),
846400-0X1 Mag Plus Diesel Float Kit 4” (10.16cm) 144” (3.66m)
20’ (6.1m)
846400-3X1 Mag Plus Diesel Float Kit 3” (7.62cm)
846400-1X1 Mag Plus Diesel Float Kit 2” (5.08cm)
312020-952 4” (10.16cm) NPT Riser Cap and Ring Kit for In-Tank Probes
Other Installation Accessories
330020-282 4” (10.16cm) Threaded NPT Riser Cap for In-Tank Probes
Specifications Product Water
Measurement Accuracy +/- 0.0300” (0.762mm) +/- 0.0300” (0.762mm)
Resolution - One Sample Reading +/- 0.002857” (0.072571mm) +/- 0.002857” (0.072571mm)
Minimum Measurement -
3.23” (8.2cm) 0.867” (2.2cm)
2” (5.08cm) Float Kits
Minimum Measurement -
3.04” (7.7cm) 0.630” (1.6cm)
3” (7.62cm) Float Kits
Minimum Measurement - 3.04” (7.7cm) / 7.0” (17.78cm) for Phase-Two
0.630” (1.6cm)
4” (10.16cm) Float Kits Float Kit
Operating (Working)
-40 to +122°F (-40 to +50°C)
Temperature Range
www.veeder.com 125 Powder Forest Drive • PO Box 2003 • Simsbury, CT 06070 • ©2019 Veeder-Root • P/N 577014-449-01 Rev. A
1.888.561.7942 All information contained in this document is subject to change without notice.
Density Mag Plus In-Tank Probe for Monitoring
Gasoline & Diesel Products in both USTs and ASTs
Probe Description & Density Mag Plus In-Tank Probe for Monitoring Gasoline &
Product Application Diesel Products in both USTs and ASTs
Universal
Sensor Module Sold Separately
TLS-450PLUS (8600 Series) -
(USM) Interface (either Factory
Minimum Software Version 5B with 64 332812-001 Up to 4 16
for Probes, Installed or as a
TLS-XB installed (3 max per system)
Sensors, and Spare Module)
DPLLD
Cable
Form # & Description Float Size Min/Max Probe Length
Lengths
Float Installation Kits 886001-1X0 Mag-D Gasoline Float Kit 2” (5.08cm) 5’ (1.5m),
48” (1.2m) -
10’ (3.05m),
886001-1X1 Mag-D Diesel Float Kit 2” (5.08cm) 144” (3.66m)
20’ (6.1m)
312020-952 4” (10.16cm) NPT Riser Cap and Ring Kit for In-Tank Probes
Other Installation Accessories
330020-282 4” (10.16cm) Threaded NPT Riser Cap for In-Tank Probes
Specifications Product Water
Measurement Accuracy +/- 0.0300” (0.762mm) +/- 0.0300” (0.762mm)
Resolution - One Sample Reading +/- 0.002857” (0.072571mm) +/- 0.002857” (0.072571mm)
Minimum Measurement -
8.00” (20.32cm) 0.87” (2.2cm)
2” (5.08cm) Float Kits
Operating (Working)
-40 to +122°F (-40 to +50°C)
Temperature Range
www.veeder.com 125 Powder Forest Drive • PO Box 2003 • Simsbury, CT 06070 • ©2019 Veeder-Root • P/N 577014-449-02 Rev. A
1.888.561.7942 All information contained in this document is subject to change without notice.
Density Mag Plus In-Tank Probe for Monitoring Other
Products in both USTs and ASTs
Probe Description & Density Mag Plus In-Tank Probe for Monitoring Other Products
Product Application in both USTs and ASTs
Universal Sensor
TLS-450PLUS (8600 Series)- Sold Separately
Module (USM)
Minimum Software Version (either Factory
64 (32 with BIR) 332812-001 Interface for Up to 4 16
5B with TLS-XB installed Installed or as a
Probes, Sensors,
(3 max per system) Spare Module)
and DPLLD
Part # & Description Float Size Cable Lengths Min/Max Probe Length
Resolution -
+/- 0.002857” (0.072571mm) +/- 0.002857” (0.072571mm)
One Sample Reading
Minimum Measurement-
6.367” (16.17cm) 1.495” (3.797cm)
2” (5.08cm) Float Kits
Operating (Working)
-40 to +122°F (-40 to +50°C)
Temperature Range
www.veeder.com 125 Powder Forest Drive • PO Box 2003 • Simsbury, CT 06070 • ©2019 Veeder-Root • P/N 577014-449-03 Rev. A
1.888.561.7942 All information contained in this document is subject to change without notice.
Mag Plus In-Tank Probe for Monitoring
Chemical Products in both USTs and ASTs
Probe Description & Product Mag Plus In-Tank Probe for Monitoring Chemical Products
Application in both USTs and ASTs
Monitoring Functionality
Part # & Description Approved Products
Options
Acetone
Xylene
Acetate (Ethyl, Butyl, n-Propyl)
Dichloromethane
Petroleum Naphtha
Specific Products Monitored /
Product Compatibility 846397-6XX Stainless Steel (SS) In-Tank Isopropyl Alcohol No Leak Detection /
Probe with High Grade Polymer (HGP)
Dimethyl formamide Inventory Only
Canister No Water Detection, UL
1-Butyl (butyl alcohol)
Butanol
Methyl Ethyl Ketone
Ethyl Benzene
Methyl Isobutyl Ketone
Probe Interface Modules
Maximum Probes / # of
Console Compatibility # of
Console Module Probe
Module Description Modules Availability
Part # Inputs per
per Console
Module
Min/Max
Cable Min/Max Chemical
Part # & Description Float Size Probe
Lengths Tank Diameter
Length
Float Installation Kits
5' (1.5m),
331824-XXX Chemical-ISO Probe 2" 48" (1.2m) - 42" (106.68cm) -
10' (3.05m),
Inventory Only Installation Kits (5.08cm) 144" (3.66m) 138" (350.52cm)
20' (6.1m)
Other Installation Accessories N/A
Specifications Product Water
Measurement Accuracy +/- 0.0300" (0.762mm) N/A
Resolution - One Sample Reading +/- 0.002857" (0.072571mm) N/A
Minimum Measurement - 2" (5.08cm) Float Kits 3.3" (8.382cm) N/A
Operating (Working) Temperature Range -40 to +122°F (-40 to +50°C) N/A
Third Party Evaluation / Agency Listings & Links http://www.nwglde.org/evals/veeder_root_j.html
Product Installation Guide Link https://www.veeder.com/us/technical-document-library
Example Installation
www.veeder.com 125 Powder Forest Drive • PO Box 2003 • Simsbury, CT 06070 • ©2019 Veeder-Root • P/N 577014-449-04 Rev. A
1.888.561.7942 All information contained in this document is subject to change without notice.
Mag Plus In-Tank Probe for Monitoring Light & Heavy Oil
Products with & without Water Detection in both USTs and ASTs
Probe Description & Mag Plus In-Tank Probe for Monitoring Light & Heavy Oil Products
Product Application with & without Water Detection in both USTs and ASTs
Monitoring Functionality
Part # & Description Approved Products
Options
No Leak Detection/Inventory Only Probes with Motor Oil No Leak Detection /
Water Detection Inventory Only
Gear Oil, 90W
1. 8
46397-3XX Stainless Steel (SS) In-Tank Probe
with High Grade Polymer (HGP) Canister with Transmission Fluid
Water Detection & No Leak Detection/Inventory
Only, UL Bio Diesel (High Density)
2. 8
46391-3XX SS In-Tank Probe with Aluminum Fuel Oil #4
(AL) Canister with Water Detection & No Leak
Detection/Inventory Only, UL Toluene
Specific Products Monitored /
Product Compatibility No Leak Detection/Inventory Only Probes with No
Water Detection
1. 8
46397-6XX SS In-Tank Probe with HGP
Canister with No Water Detection & No Leak
Detection/Inventory Only, UL
2. 8
46391-6XX SS In-Tank Probe with AL Canister
with No Water Detection & No Leak Detection/
Inventory Only, UL
Universal
Sensor
Sold Separately
TLS-450PLUS (8600 Series) Module (USM)
(either Factory
with TLS-XB installed (3 max 64 332812-001 Interface Up to 4 16
Installed or as a
per system) for Probes,
Spare Module)
Sensors, and
DPLLD
Part # & Description Float Size Cable Lengths Min/Max Probe Length
846400-0X4 Mag Plus Alternative Fluids Float Kit -
4” (10.16cm)
No Water Float
846400-3X4 Mag Plus Alternative Fluids Float Kit -
3” (7.62cm)
No Water Float
Float Installation Kits 5’ (1.5m),
846400-1X4 Mag Plus Alternative Fluids Float Kit - 48” (1.2m) -
2” (5.08cm) 10’ (3.05m),
No Water Float 144” (3.66m)
20’ (6.1m)
846400-0X1 Mag Plus Diesel Float Kit 4” (10.16cm)
846400-3X1 Mag Plus Diesel Float Kit 3” (7.62cm)
846400-1X1 Mag Plus Diesel Float Kit 2” (5.08cm)
312020-952 4” NPT Riser Cap and Ring Kit for In-Tank Probes
Other Installation Accessories
330020-282 4” Threaded NPT Riser Cap for In-Tank Probes
Specifications Product Water
Measurement Accuracy +/- 0.0300” (0.762mm) +/- 0.0300” (0.762mm)
Resolution - One Sample Reading +/- 0.002857” (0.072571mm) +/- 0.002857” (0.072571mm)
Minimum Measurement - 2” (5.08cm)
3.23” (8.2cm) 0.867” (2.2cm)
Float Kits
Minimum Measurement - 3” (7.62cm)
3.04” (7.72cm) 0.630” (1.6cm)
Float Kits
Minimum Measurement - 4” (10.16cm)
3.04” (7.72cm) 0.630” (1.6cm)
Float Kits
Operating (Working)
-40 to +122°F (-40 to +50°C)
Temperature Range
Third Party Evaluation / Agency
Listings & Links
http://www.nwglde.org/evals/veeder_root_j.html
www.veeder.com 125 Powder Forest Drive • PO Box 2003 • Simsbury, CT 06070 • ©2019 Veeder-Root • P/N 577014-449-05 Rev. A
1.888.561.7942 All information contained in this document is subject to change without notice.
Mag Plus In-Tank Probe for Monitoring LPG
Products in both USTs and ASTs
Probe Description & Mag Plus In-Tank Probe for Monitoring LPG Products
Product Application in both USTs and ASTs
Monitoring Functionality
Part # & Description Approved Products
Options
Universal Sensor
Sold Separately
Module (USM)
(either Factory
TLS-450PLUS (8600 Series) 64 332812-001 Interface for Up to 4 16
Installed or as a
Probes, Sensors,
Spare Module)
and DPLLD
Min/Max
Cable Min/Max
Part # & Description Float Size Chemical Tank
Lengths Probe Length
Diameter
Float Installation Kits 333083-XXX LPG-ISO Probe Inventory Only
1.5" (3.81cm) 5' (1.5m),
Installation Kits 48" (1.2m) - 42" (106.68cm) -
10' (3.05m),
333082-XXX LPG-ISO Probe Inventory Only 144" (3.66m) 138" (350.52cm)
2.0" (5.08cm) 20' (6.1m)
Installation Kits
Other Installation
N/A
Accessories
Specifications Product Water
Measurement Accuracy +/- 0.0300" (0.762mm) N/A
Resolution -
+/- 0.002857" (0.072571mm) N/A
One Sample Reading
Minimum Measurement -
3.25" (82.55mm) N/A
1.5" (3.81cm) Float Kits
Minimum Measurement -
3.25" (82.55mm) N/A
2.0" (5.08cm) Float Kits
Operating (Working)
-40 to +122°F (-40 to +50°C) N/A
Temperature Range
Working Pressure 375 psi N/A
Third Party Evaluation /
Agency Listings & Links
http://www.nwglde.org/evals/veeder_root_j.html
Product Installation
Guide Link
https://www.veeder.com/us/technical-document-library
Example Installation
www.veeder.com 125 Powder Forest Drive • PO Box 2003 • Simsbury, CT 06070 • ©2019 Veeder-Root • P/N 577014-449-06 Rev. A
1.888.561.7942 All information contained in this document is subject to change without notice.
Mag-FLEX In-Tank Probe for Monitoring
Gas & Diesel Products
Probe Description & Product Mag-FLEX In-Tank Probe for Monitoring Gas & Diesel
Application Products in both USTs and ASTs
Monitoring Functionality
Part # & Description Approved Products
Options
1. 8
89590-4XX Mag-FLEX probe with No Leak Detection /
Gasohol (<=15% Ethanol)
gasoline & water floats, wired, UL/cUL Inventory Only
2. 8
89590-5XX Mag-FLEX probe with Gasoline with <=7% Methanol and 8%
diesel & water floats, wired, UL/cUL TBA
3. 8
89590-6XX Mag-FLEX probe with no
water float, wired, UL/cUL Gasoline with <=15% MTBE
4. 8
89590-1XX Mag-FLEX probe with Gasoline with <=17% TAME
gasoline & water floats, wireless,
UL/cUL Leaded Gasoline
Specific Products Monitored /
Product Compatibility 5. 8
89590-2XX Mag-FLEX probe with Mineral Spirits
diesel & water floats, wireless, UL/cUL
6. 8
89590-3XX Mag-FLEX probe with no Premium Unleaded Gasoline
water float, wireless, UL/cUL
Regular Unleaded Gasoline
Gasoline with <=15% ETBE
Gasoline with <=12% TBA
Diesel (Fuel Oil #2)
Kerosene (Fuel Oil #1)
Bio Diesel (Low Density)
Probe Interface Modules
Maximum
Console Compatibility Probes / # of Probe
Module # of Modules
Console Module Part # Inputs per Availability
Description per Console
Module
Universal Sensor
Sold Separately
TLS-450PLUS (8600 Series) Module (USM)
(either Factory
with TLS-XB installed 64 332812-001 Interface for Up to 4 16
Installed or as a
(3 max per system) Probes, Sensors,
Spare Module)
and DPLLD
TLS4i (8601 Series) 4
No module required, probe input capability factory installed
TLS4c (8601 Series) 2
Sold Separately
4-Input Probe (either Factory
TLS-350/R/PLUS 16 329356-002 4 4
Interface Module Installed or as a
Spare Module)
TLS-300i 4
No module required, probe input capability factory installed
TLS-300C 2
Mag-FLEX In-Tank Probe for Monitoring
Gas & Diesel Products
Special
Form # & Description Float Size Min/Max Probe Length
Instructions
330020-776 Kit - Low Level Water Float Low level water
4” (10.16cm)
(1.9” for Gasoline) float kits require
Float Installation Kits a 4” tank opening
330020-777 Kit - Low Level Water Float
3” (7.62cm) and connect
(1.9” for Diesel) 5’ (1.5m) - 49.2’ (1.25m)
directly to the
existing water
330020-824 Kit - Low Level Water Float
2” (5.08cm) float. Wall guide
(1.9” for Bio-Diesel)
included.
848100-004 - Over voltage protection device 1 per probe recommended
Other Installation Accessories
576008-708 - 2” (5.08cm) NPT Adapter for installation of Mag-FLEX AST probes (req’d 1/probe)
Specifications Product Water
Measurement Accuracy +/- 0.0800” (2.032mm) +/- 0.12” (3.048mm)
Resolution - One Sample
+/- 0.02” (0.508mm) +/- 0.02” (0.508mm)
Reading
Minimum Measurement +/- 7.3” (18.542cm) (1.5” (3.81cm) Float) +/- 5.5” (13.97cm) Std / 1.9” (4.826cm) low level
Operating (Working)
-40 to +140°F (-40 to +60°C)
Temperature Range
Product Material
Probe Canister Stainless Steel 303
Rigid Shaft sections Stainless Steel 304
Corrugated Flexible Shaft
Stainless Steel 316 Ti
& Floats
Weight Stainless Steel 303
6. Weight length
7. Dead zone
9. Grounding cable
www.veeder.com 125 Powder Forest Drive • PO Box 2003 • Simsbury, CT 06070 • ©2019 Veeder-Root • P/N 577014-449-07 Rev. A
1.888.561.7942 All information contained in this document is subject to change without notice.
Stainless Steel Mag Plus In-Tank Probe for Monitoring Alternative
Fluids with No Water Detection in both USTs and ASTs
Probe Description & Stainless Steel Mag Plus In-Tank Probe for Monitoring Alternative
Product Application Fluids with No Water Detection in both USTs and ASTs
Universal Sensor
TLS-450PLUS (8600 Sold Separately
Module (USM)
Series) with TLS-XB (either Factory
64 (32 with BIR) 332812-001 Interface for Up to 4 16
installed (3 max per Installed or as a
Probes, Sensors,
system) Spare Module)
and DPLLD
Cable Min/Max
Part # & Description Float Size
Lengths Probe Length
846400-0X4 Mag Plus Alternative Fluids Float Kit -
4” (10.16cm)
No Water Float
Float Installation Kits 5’ (1.5m),
846400-3X4 Mag Plus Alternative Fluids Float Kit - 48” (1.2m) -
3” (7.62cm) 10’ (3.05m),
No Water Float 144” (3.66m)
20’ (6.1m)
846400-1X4 Mag Plus Alternative Fluids Float Kit -
2” (5.08cm)
No Water Float
312020-952 4” (10.16cm) NPT Riser Cap and Ring Kit for In-Tank Probes
Other Installation Accessories
330020-282 4” (10.16cm) Threaded NPT Riser Cap for In-Tank Probes
Specifications Product Water
Measurement Accuracy +/- 0.0300” (0.762mm) N/A
Resolution - One Sample Reading +/- 0.002857” (0.072571mm) N/A
Minimum Measurement - 2” (5.08cm) Float Kits 3.23” (8.2cm) N/A
Minimum Measurement - 3” (7.62cm) Float Kits 3.04” (7.72cm) N/A
Minimum Measurement - 4” (10.16cm)
3.04” (7.72cm) N/A
Float Kits
Operating (Working) Temperature Range -40 to +122°F (-40 to +50°C)
UL, cUL, ATEX, IECEx
Third Party Evaluation / Agency Listings & Links
http://www.nwglde.org/evals/veeder_root_j.html
Product Installation Guide Link https://www.veeder.com/us/technical-document-library
Example Installation
www.veeder.com 125 Powder Forest Drive • PO Box 2003 • Simsbury, CT 06070 • ©2019 Veeder-Root • P/N 577014-449-08 Rev. A
1.888.561.7942 All information contained in this document is subject to change without notice.
Stainless Steel Mag Plus In-Tank Probe for Monitoring Gasoline,
Retail Diesel Products, & Water in both USTs and ASTs
Probe Description & Stainles Steel Mag Plus In-Tank Probe for Monitoring Gasoline,
Product Application Retail Diesel Products & Water in both USTs and ASTs
Universal Sensor
TLS-450PLUS (8600 Sold Separately
Module (USM)
Series) with TLS-XB Up to 4 - (either Factory
64 (32 with BIR) 332812-001 Interface for 16
installed (3 max per TLS-4XX Installed or as a
Probes, Sensors,
system) Spare Module)
and DPLLD
Min/Max
Part # & Description Float Size Cable Lengths
Probe Length
886100-XX0 Mag Plus Phase Separation Float Kit 4” (10.16cm)
846400-3X0 Mag Plus Gasoline Float Kit 3” (7.62cm)
Float Installation Kits 5’ (1.5m),
846400-1X0 Mag Plus Gasoline Float Kit 2” (5.08cm) 48” (1.2m) -
10’ (3.05m),
846400-0X1 Mag Plus Diesel Float Kit 4” (10.16cm) 144” (3.66m)
20’ (6.1m)
846400-3X1 Mag Plus Diesel Float Kit 3” (7.62cm)
846400-1X1 Mag Plus Diesel Float Kit 2” (5.08cm)
Other Installation 312020-952 4” (10.16cm) NPT Riser Cap and Ring Kit for In-Tank Probes
Accessories 330020-282 4” (10.16cm) Threaded NPT Riser Cap for In-Tank Probes
Specifications Product Water
Measurement Accuracy +/- 0.0300” (0.762mm) +/- 0.0300” (0.762mm)
Resolution -
+/- 0.002857” (0.072571mm) +/- 0.002857” (0.072571mm)
One Sample Reading
Minimum Measurement -
3.23” (8.2cm) 0.867” (2.2cm)
2” (5.08cm) Float Kits
Minimum Measurement -
3.04” (7.72cm) 0.630” (1.6cm)
3” (7.62cm) Float Kits
Minimum Measurement -
3.04” / 7.0” for Phase Sep. 0.630” (1.6cm)
4” (10.16cm) Float Kits
Operating (Working)
-40 to +122°F (-40 to +50°C)
Temperature Range
Example Installation
www.veeder.com 125 Powder Forest Drive • PO Box 2003 • Simsbury, CT 06070 • ©2019 Veeder-Root • P/N 577014-449-09 Rev. A
1.888.561.7942 All information contained in this document is subject to change without notice.
Stainless Steel Mag Plus In-Tank Probe for Monitoring Jet
Fuel Products with No Water Detection in both USTs and ASTs
Probe Description & Stainless Steel Mag Plus In-Tank Probe for Monitoring Jet Fuel
Product Application Products with No Water Detection in both USTs and ASTs
Universal Sensor
Sold Separately
Module (USM)
TLS-450PLUS (either Factory
64 332812-001 Interface for Up to 4 16
(8600 Series) Installed or as a
Probes, Sensors,
Spare Module)
and DPLLD
www.veeder.com 125 Powder Forest Drive • PO Box 2003 • Simsbury, CT 06070 • ©2019 Veeder-Root • P/N 577014-449-10 Rev. A
1.888.561.7942 All information contained in this document is subject to change without notice.
For technical support, sales or
other assistance, please visit:
www.veeder.com