Professional Documents
Culture Documents
http://www.tellhowpower.com
Altitude:≤1000m
(>1000m when the power correction to be done)
Ambient temperature: 40℃
Relative humidity:≤60%
Design standard
Equipment and accessories according with following criteria, but not limited to:
GB2423.4: Electric and electronic products of basic environmental testing instruction Db:Alternate damp &heat testing rule
GB2423.16: Electric and electronic products of basic environmental testing instruction J:Mould growth testing rule
GB12699: Power frequency generating sets for rated power, voltage and rotate speed
ZB J91 005: Internal combustion engine driven generating sets -- Limits and measuring rule tensional vibration of shaft
Page 1 of 6
2018Tellhow Sci-Tech Co., Ltd.
http://www.tellhowpower.com
Page 2 of 6
2018Tellhow Sci-Tech Co., Ltd.
http://www.tellhowpower.com
Technical Parameters
Model THLP720PL
Prime power (kW/kVA) 720
Standby power(kW/kVA) 800
speed(RPM) 1500
voltage(V) 400
current(A) 1299.08
frequency(Hz) 50
power factor 0.8
Phase number 3
Unit weight(Kg) 7600
Measurement(L×W×H) 4650×2046×2320(mm)
Performance Index
Page 3 of 6
2018Tellhow Sci-Tech Co., Ltd.
http://www.tellhowpower.com
PERKINS Engine
PERKINS
Model
4008TAG1A
Prime power(KW) 805
Four stroke
engine structure
turbocharging
Cylinder number
8/L
/arrangement
Page 4 of 6
2018Tellhow Sci-Tech Co., Ltd.
http://www.tellhowpower.com
leroy somer Alternator
Frequency (Hz) 50
±0.5% or ±1%.
Telephone influence figure (TIF) < 50, telephone harmonic figure (THF) < 2%, brushless device and high
Page 5 of 6
2018Tellhow Sci-Tech Co., Ltd.
http://www.tellhowpower.com
Tellhow TCA Series standard Control System Tellhow TCA Series Optional Control System
DSE7320 is a kind of new integrated control module for generating-set The DSE8610 MKII is an easy to use Synchronising Auto Start
manual control & auto start & auto mains fallure control Control Module suitable for use in amulti-generator loadshare
module ,DEEP SEA controller has powerful image display function, system,designed to synchronise up to 32 enerators including
with images, symbols and rectangular map operation. It can be work electronic and non-electronic engines.The DSE8610 MKII monitors
well at -30 ℃. the generator and indicates operational status and fault conditions,
【Feature】 automatically starting or stopping the engine on load demand or fault
Integrated electronic control devices(J1939 interface) condition.
Automatic / manual start and stop,Automatically transfers 【Feature】
between mains (utility) and generator for convenience. Comprehensive synchronising &loadsharing capabilities, Built
Light testing button is easy to control in governor and AVR control,Base load (kW export)
LED indicator,Multiple parameters are monitored & displayed control,Positive & negative kVAr export control
simultaneously for full visibility The maximum support of a single set of 32 generators in
Adjust parameter in the indicator directly or by connected by PC parallel
Three-phase generating-set protection,Over-voltage / Adjust parameter in the indicator directly or by connected by
under-voltage Over-frequency / low-frequency Current / PC
voltage asymmetry Over-current/over load Three-phase generating-set protection,Over-voltage /
Generating-set testing(50/60Hz):U1-U3, I1-I3, Hz, kW, kVAr, under-voltage Over-frequency / low-frequency Current /
kWh voltage asymmetry Over-current/over load
Protection select: alarm / shutdown Simulating oil pressure, Generating-set testing(50/60Hz):U1-U3, I1-I3, Hz, kW,
water temperature, oil level, battery voltage, engine speed kVAr, kWh
Configured with programmed input&output,PLC editor allows Protection select: alarm / shutdown Simulating oil pressure,
user configurable functions to meet user specific application water temperature, oil level, battery voltage, engine speed
requirements Configured with programmed input&output
Simultaneous use of RS232 andRS485 communication ports , Simultaneous use of RS232 andRS485 communication ports,
True dual mutual standby usingRS232 or RS485 for accurate True dual mutual standby usingRS232 or RS485 for accurate
engine hours balancing. engine hours balancing.
Tellhow Sci-Tech Co., Ltd.
Huiren Rd. 266, Xiaolan Industrial Park,Nanchang, Jiangxi Province,China
Tel: +86-791-85985193 Fax: +86-791-85985332
E-mail: genset@tellhowpower.com
If you have any question or inquiry, please contact Tellhow sales organization
Page 6 of 6