BST grade WR
Min / max temps +1 / 100°C
Iniiol AP :30 mbar
ST grade RM
Filtration: 10
Residual ol 15 ppm
Fliration efficiency: 90%
Min / mox temp.: #1 / 80°C
Initial AP <50 mbar
Incl soturoted AP <120 mbar
Residual oil: 0.1 ppm / 011 mg/m
Fillration efficiency: 99.95%
Min / max temp. +1 / 80°C
Initial AP <60 mbar
Initial soturated AP <140 mbar
BST grade RA
Filtration: 0.01
Residual ofl: 0.01 ppm / 0,01 mg/m3
Filtration efficiency 99:9999%
Min / max temps +1 / 80°C
Intiol AP-<80 mbor
Initial soturoted AP <200 mbar
BST grade CA
Residual ol: 0.003 ppm / 0.008 mg/m’
Min / max temp.: +1 / 50°C
Intiol AP <250 mbar
Substitution: cool sotvroted
Filtration efficency: 99,95%
Min / max temp.: +1 / 100°C
Intiol AP-<40 mbor
Reduction of the liquid phase
Reduce the liquid phase
in the compressed ir before
prefiration with the other grades.
Prefiltration
Removes solid particles ond
condensation. Preserve the tanks
installed immediately ater the
compressors
Prefers of RB ond RA grades.
General filtration
Removes solid paricles end aero-
sols water ond ol
Appropriate for general applica
tions, can be used upstream RA and
AC grade.
High filtration efficiency
Removing the high-efficiency
solid particles and aerosols oil
Protection of instrumentation,
adsorption dryers and
filration ot the point of use
Prefer CA grade.
Reduction of smells and
oil vapor
Activated carbon smells and vapor.
Specited in food, pharmaceuticel,
electronic, applications; must be
protected upstream by the RA,
grade.
Removal of fine dust
Ideal for applications
downstream of adsorption dryers
fr process firation when flid is
dry.