Professional Documents
Culture Documents
ASSIGNMENT QUESTIONS.
SECTION A: 60 MARKS
INSTRUCTION:
This section consists of TWO (2) structured questions. Answer ALL questions.
QUESTION 1
CLO1 and Unit Impulse Function Also state how both of these function operate.
C3
Multiplier
Figure 1 / Rajah 1
[10 marks]
Figure 2
Sketch and assign the signal for:
Lakarkan dan tetapkan isyarat untuk:
(i)
(ii)
(iii)
KEMASKINI PADA 19.07.2019 3 SULIT
SULIT DEE40113: SIGNAL AND SYSTEM
ASSIGNMENT QUESTIONS.
CLO1 QUESTION 2
C3 SOALAN 2
a) A special class of system used in signals and systems exist where the system is both
Linear and Time Invariant. This is called a Linear Time-Invariant system (LTI Systems).
CLO1
C3 Demonstrate the operation of a Linear Time-Invariant system (LTI Systems).
[10 marks]
CLO1 Discrete Time signal x[n] and a linear time invariant (LTI) system with the impulse
C3 response h[n] as Figure 4 as shown below:
Figure 4
[10 marks]
c) The importance of the convolution operation in LTI systems stems from the fact that
CLO1 knowledge of the response of an LTI system to the unit impulse input allows us to find its
C3
output to any input signals. Using convolution method compute the output function of
related in figure 5.
1 1
0
KEMASKINI PADA 19.07.2019 1 40 0.5 1 SULIT
SULIT DEE40113: SIGNAL AND SYSTEM
ASSIGNMENT QUESTIONS.
SECTION B: 40 MARKS
INSTRUCTION:
This section consists of TWO (2) essay questions. Answer the question.
QUESTION 1
CLO1 Consider signal of a Linear Time Invariant signal is represented by the function of
C4
. Determine output of this particular function using integral method. Also
inspect the inverse Laplace Transform of the given function below.
[20 marks]
QUESTION 2
A filter circuit is given as in Figure 6 below. The impulse response of the system is given as:
CLO1
C5
Deduce the frequency response, and plot the magnitude and phase response of the system.
Figure 6
[20 marks]