Professional Documents
Culture Documents
2. Objective:
How dynamic routing is created , maintained and updated by a network administrator using
dynamic route RIP.
3. Apparatus:
4. Procedure:
Attach required devices (Switch/Router) in the packet tracer software.
Assign IP address to devices.
Assign subnet mask and default gateways of every device linked with the router.
Set up the dynamic routing between both the routers associated with the network and
next hop provided.
Select source and destination for the message (PDU) and drop packet from source
to destination.
Go to Simulation mode and click capture/Play.
Check simultaneously at the right side of the bottom most corner to check the status
of the connection as being successful or failed.