Professional Documents
Culture Documents
FABRIC REQUIREMENTS: Canvas or home dec weight fabric for the bucket and the
optional trim. Lining can be made with the same fabric or lighter weight fabric. Heavy
weight interfacing such as Pellon® Peltex 70.
SIZING: Finished bucket has a 12” base diameter and 12” tall walls. Upper diameter is wider
than base.
PRINTING: Before printing, be sure that your scaling is set to “no scaling” or “100%”.
Print page 5 first and measure the test boxes to be sure you’re printing to scale. Even
1/16” discrepancy can throw your whole pattern off.
TERMS OF USE: Purchase includes the right to sell garments made with this pattern.
However, it is illegal to copy, share, distribute, or resell the pattern, illustrations, or
instructions. Please respect the copyright and direct any requests to
www.heyjunehandmade.com.
TAPING GUIDE: Use the following chart as a guide to tape the pattern together. The small triangles
will help you line up the pages, and they also indicate where pages will be taped together. If no tri-
angle is present, that side will not be taped. To save paper you can skip pages 13 - 16 and just mea-
sure piece 4, which is a rectangle. The dimensions are 3”x26.5”. Cut two.
1 4
5
2 3
2 5
3
1 4
2 cm
5
june
c ri
HARD KN O C K
b
B UCKET
o f f a
2
SIDE
cut 1 on
fold
grain
6
7 june
HARD KNOCK BUCKET
1
BOTTOM
cut 1
grain of fabric
9
10 mark for
handle opening
11 june
HARD KNOCK BUCKET
3
TRIM
cut 1 on fold
8
june HARD KNOCK BUCKET
mark for
12
5 handle opening
HANDLE OPENING FACING
cut 2
13
june
grain of fabric
HARD KNOCK BUCKET
14
HANDLES
cut 1 on fold
15
16