Professional Documents
Culture Documents
Heavy Loads
Heavy Loads
TK
A Company
of ThyssenKrupp
Elevator
ThyssenKrupp Aufzüge
Moving heavy loads
can be light work.
Know-how and technology
from a single source.
2
ThyssenKrupp freight elevators offer enormous
benefits for all applications, which bear testimony
to your decision to invest in one of our systems.
3
The load. The strength. Your decision.
There are loads. There are powerful solutions.
You can choose between traction and hydraulic
drives.
Lifting off with the traction jack transmits the force in the
Traction or hydraulic drive - the drive. form of a torque-free pivoted
decision depends largely on the travel For greater travel heights, the precision piston rod. And
freight elevator with traction thanks to the self-adjusting
height and the structural conditions. drive is the most cost-effective seal, the maintenance-free
concept in almost all cases. design remains extremely low-
ThyssenKrupp freight elevators wearing.
are fitted as standard with fre-
quency-controlled drives. These The latest control technology.
drives are synonymous with All ThyssenKrupp freight eleva-
high energy savings and soft tors operate using controls from
acceleration and deceleration. our comprehensive family,
Our drives are also known for Thyssocontrol Multican® (TCM).
their stopping accuracy. Even The latest in IT management is
during a load change resulting applied using the CAN-bus and
from the elevator car being micro-processor technology.
loaded and unloaded, the dri- Ultimately, this means system
ves remain under precise con- advancement in terms of
trol and thus guarantee smooth optimized frequency of use and
transportation. rational capacity utilization with
short travel and wait times, high
On traction drive elevators, the availability and the associated
machine room is located above travel comfort. Combined with
the shaft. Alternative solutions application-specific software,
using diverter pulleys can also Thyssocontrol Multican® offers
be realized if required. All motors a wide range of services that
are safeguarded by watchdog are ideally suited to practically
timing and electronic motor any situation.
Shaft height section of a traction Shaft height section of a hydraulic drive
protection.
drive freight elevator freight elevator
ThyssenKrupp Teleservice,
Master short distances with ThyssenKrupp InfoSystem or
the hydraulic drive. ThyssenKrupp Monitoring are
The correct choice for shorter also available as alternative
travel heights is our hydraulic tools for utilization analysis,
drive elevator. individual adjustment and
Depending on the requirement, 24-hour remote monitoring of
two drive systems are used the elevator installation.
where hydraulic lifters move the
cars either directly or indirectly.
4
Rated load:
Traction drive elevators:
1,000 kg -5,000 kg.
(on request to max. 12,000 kg)
Hydraulic elevators:
500 kg -5,000 kg.
(on request to max. 20,000 kg)
Speed:
Protector strips from hard Reinforced, shock-proof Flush-mounted lighting. Embossed, anti-slip floor Controls embedded into
wood. steel plates. covering. the wall.
Up to 1.0 m/s (on request
higher speeds available)
depending on rated load.
Elevator cars for Rugged design concentrated or steel strips provide the car
loads. walls with additional protection. Standard dimensions
freight transporta- The supporting frame forms the The controls and light switches Elevator cars:
tion must be able basic structure of the elevator are embedded into the elevator Width: 1.00 m -3.00 m.
car. Its features: pure solidity. car wall to provide extra protec- Depth: 1.60 m -5.00 m.
to satisfy stringent The floor, an equally stable tion from potential damage. Height:2.00 m -2.50 m.
and even extreme frame structure, has a bonded Space utilization is a further im-
covering and embossed, anti- portant quality characteristic for Detailed dimensions and further
requirements at all slip coating. As an alternative, freight elevators; the clear load project planning data can be
times. the floor can also be from stain- dimensions permit this to the found in our document entitled
less steel or Mipolam covering. fullest degree. "Project Planning for Freight
The steel plates forming the Elevators".
walls are extremely shock and
distortion-proof. Wood, plastic
5
Last but not least: Doors and door safety devices.
Heavy duty and protection
especially for freight transportation.
6
Light curtain. Standard entrance
The ThyssenKrupp Aufzüge monitoring.
light curtain secures the door In order to make optimal use
opening area from the floor of the transport capacities, in
to 1.80 m. addition to the light curtain we
Any obstacle that appears is de- also offer motion detection
tected immediately and neither systems. This feature detects
function nor operating sequen- objects on the approach to the
ces may show any noticeable door area. This enables the
signs of impairment. Perfect automatic door to respond
protection also for the surfaces early and continue the journey
of all ThyssenKrupp Aufzüge without major time loss.
doors. Supplied as standard
with a top-quality powder
coating, even hollow spaces are
provided with long-term corro-
sion protection.
7
Presented by:
Reproduction, reprint and storage without consent of the
viewed as binding when confirmed expressly in writing.
The details quoted in this brochure can only be
Printed in Germany 9700 000 6720-0 07/ 04
Phone: +49 (0) 7158 12-0, Fax: +49 (0) 7158 12-2585
Email: info@tke-aufzuege-de.thyssenkrupp.com
Internet: www.thyssenkrupp-aufzuege.com