Professional Documents
Culture Documents
Earthworks Computation
https://1drv.ms/u/s!AraZqUahD_bEjqQfxgHM8UW4QM2nlA?e=G6gn6k
Flow Chart
ZeonEarth
Perform any ZeonEarth computation up to a 3D model.
Autodesk Revit
Now launch Revit. Navigate to Insert ribbon. Then Select Link CAD.
Select your 3D CAD drawing to open. Set your desired setting prior to opening. Such as Layers for only
visible.
To view in 3D of Revit. Select View ribbon and 3D view button. Remember set the 3D model to Shaded
view to display.
Once the model into Revit, you can start do your Revit model in BIM. Example to insert a section.
Time
The first 3d model took 2 minutes in ZeonEarth. Revit you may need less than 5 minutes to complete
this task.
Interpretation
This is an example to demonstrate how our ZeonEarth 3D output can be used in any software that
supported 3D model such as in 3D DWG file. With our ZeonEarth full 3D model, you can use the output
of ZeonEarth in Autodesk Revit model to your further action.
www.civilstructural.com.my
DISCLAIMER
CONSIDERABLE TIME, EFFORT AND EXPENSE HAVE GONE INTO THE DEVELOPMENT AND
DOCUMENTATION OF EARTHWORKS COMPUTATION V6.0. THE PROGRAM HAS BEEN THOROUGHLY
TESTED AND USED. IN USING THE PROGRAM, HOWEVER, THE USER ACCEPTS AND UNDERSTANDS THAT
NO WARRANTY IS EXPRESSED OR IMPLIED BY THE DEVELOPERS OR THE DISTRIBUTORS ON THE ACCURACY
OR THE RELIABILITY OF THE PROGRAM.
IT IS USED BY EARTHWORKS DESIGNER WITH THE NECESSARY PREREQUISITE KNOWLEDGE AND SKILLS TO
SUPPLY APPROPRIATE DATA AND TO JUDGE THE CORRECTNESS OF THE RESULTS. THE USER MUST
EXPLICITLY UNDERSTAND THE ASSUMPTIONS OF THE PROGRAM AND MUST INDEPENDENTLY VERIFY THE
RESULTS
Additionally, this manual is deemed to hold sufficient details for the purpose of informing the user on the
usability of the software. Parts of this documentation may from time to time be updated, revised,
removed, enhanced, or edited without prior notice. Hence the user must explicitly understand the usage
of the program and must independently verify the claims of the all-said documentations.
Revit® are trademarks of AutoDesk, Inc. Microsoft®, Bricscad is commercialized by Bricsys NV. Bricsys NV
and Vondle NV are fully owned subsidiaries of Menhirs NV. and Microsoft® Windows® are trademarks of
Microsoft Corporation that may be registered in certain jurisdictions. All other products or name brands
are trademarks of their respective holders and are acknowledged.