Professional Documents
Culture Documents
EED1114 IC Test2 June2020
EED1114 IC Test2 June2020
Department of Engineering
In-class Test 2
Total Marks: 50
Instructions:
1. This assessment consists of 2 questions. Answer all the questions in the space provided.
2. Once you have completed answering all the questions, ensure you submit the assessment by clicking
on the "Submit Quiz" button. Note that you can submit only once (1).
3. Ensure you complete the assessment within the given amount of time. Once the given amount of
time has expired, the system will automatically submit whatever answers you have written and close the
assessment.
4. This is a closed-book assessment. You are not allowed to refer to any sources during this assessment.
Once you start taking the assessment, you are not allowed to communicate with anyone through any
means.
5. Students caught copying, plagiarising or engaging in any form of action with the intention to cheat
will be penalised.
a) A capacitor consists of two parallel plates with a total surface area of 10 cm2. The plates are
separated by 0.5 mm of ceramic with relative permittivity of 40. By using εo = 8.85 x 10-12 F/m, given
that 10 nC charge is stored in the capacitor, determine the:
b) Three capacitors with the capacitances of 2 µF, 5µF and 8µF are connected in parallel across a
10_V supply. Determine the:
iv) capacitance that must be connected in series with the total capacitance in part (i) if the total
charge in the circuit now is 100 µC. (6 marks)
a) A 400 mm long conductor carries a current of 15 A and is at right angles to a magnetic field between
two circular pole faces. The total flux between the pole faces is 0.8 mWb. Determine the diameter
of the pole face if a 0.5 N of force is exerted on the conductor. (8 marks)
b) A mild steel ring has a mean length of 0.16 m and a cross-sectional area of 20 cm2. A coil is wound
around the ring and has 400 turns. The magnetic flux of 0.4 mWb is produced with a field intensity
of 200 At/m when the current is flowing along the coil. Given that the permeability of vacuum,
µo_=_4π x 10-7 H/m, determine the:
c) State the equation of Faraday’s Law. Then, derive the equation of inductance of a coil, L in terms
of magnetic flux, 𝜙. (6 marks)
THE END