Professional Documents
Culture Documents
Basic
PZ-M PZ-V
Other Functions PZ-V (Digital Type)
Sensitivity SET button
adjustment UP button Display selection
trimmer Digital monitor This switches between the distance display and ON/OFF display.
Two-point calibration
The value will be automatically set to the mid-point between when
Key-lock LR-Z
there is no workpiece and when there is a workpiece. Press and for 3 seconds or more at the same time.
Press [SET] Press [SET]
1 2 LR-T
briefly. briefly.
* When the difference is small., "----" blinks. Or the green LED turns off. CZ-V20
Blinking * Do the same to disable this function.
Orange
Max. is lit. adjust the receiver position in the same way.
A Turn the trimmer counterclockwise from Max.
Blinking Green
2 until the green LED turns off. Assume the
Orange position as Point A.
* When the difference is small., "----" blinks. Or the green LED turns off. Max.
3
A Optimal
position Green Set the trimmer at the middle point between the PX
Orange maximum sensitivity and point A.
Max.
Orange up (or turn off) even with the trimmer at the maximum
A sensitivity, use the maximum sensitivity as point A.
B
Green Set the workpiece in place, turn the trimmer
* When the difference is small., "----" blinks. 2 counterclockwise from point A until the green
Orange LED turns off. Assume the position as point B.
Or the stable operation indicator (green) turns off. A
B Optimal
position Green Set the trimmer at the middle point between
3
point A and point B.
A Orange
Manual adjustment
The setting value can be finely adjusted manually. Switching Output
1 Press or briefly. (The numerical value blinks.) Switch output by arranging the pink wire.
• Short-circuit the pink wire to DC12 - 24V: Dark-ON
2 Press or to adjust the setting value. • Short-circuit the pink wire to 0V: Light-ON