Professional Documents
Culture Documents
4. Switch ON Console
System Configuration:-
1) Image Modality :- 1. Date : European Long / Short
4. Institute : Hospital Name to be Printed,
, 15. User Utility password : Default,
21. Connection : N:N if barcode is connected or keep 1:1
To create Printer
Go to All other Nodes –Select New
Host name : Fujiprinter IP address to
172.16.1.40, OK
AE name DRYPIX and Port No. 104
New: Abstract Syntax: Basic grey scale print
Roll :SCP Select 8x10, 10x14,
14x17 – OK
Request film size supported
New : Abstract Syntax :verification roll SCU
To create ru0 :select all other nodes: new host name :RU0 ip
Address: 172.16.1.10 selects FRUP
Then ok Select cassette: button
Caption RU0 ok
To Create Work station :- All other Nodes - New - Host Name : imageworks,
IP address : 172.16.1.30 - Select DICOM - OK - AE : ImageWorks, Port No.
104 - New - Abstract Syntax : CR Image Storage, Role : SCP, Acceptable
Density : ST & HQ and SH, Default : HQ/ SH, Image Processing : PROC,
LUT :Apply LUT Module for Sending/ VOI LUT, Send Annotation : YES - OK –
OK
New: Abstract Syntax :verification Roll SCP
. Switch ON RU and go to Utility pressing both key 1 and key 3 for 50 seconds during
boot up. Check and confirm the IP addresses of Reader and FTP server. Confirm PING
in between Console and RU.