Professional Documents
Culture Documents
Product data
Property FST-8020J
FST-8030 FST-8040S FST-8050S FST-8060S
Appearance Transparent
Appearance Transparent
)
Tensile strength(Mpa ≥ 9.3 9.8 9.0 8.3
Elongation at break(≥%) 950 900 800 680
Breaking set(%) 6 4 8 8
Tear strength(KN/M) 28 33 37 42
Dielectric strength(KV/mm≥) 22 22 22 22
Volume resistivity(Ω.cm≥)
Version 2.0 Fumed Silicone Rubber for Molding 2020-04 Page 1/2
浙江富士特硅材料
ZHEJIANG FUSHITE SILICON CO.,LTD
Product data
Appearance Transparent
Dielectric strength(KV/mm≥) 22 22
Volume resistivity(Ω.cm≥)
• Curing agent : C-8 (2,5-dimethyl 2,5-di(t-butyl peroxy) hexane paste ) 1.0 phr
• Curing condition : 170℃×5min
These figures are intended as a guide and should not be used in preparing specifications.
The data presented in this leaflet are in accordance with the present state of our Detailed safety information is contained in For technical, quality, or product
knowledge, but do not absolve the user from carefully checking all supplies immediately each material data safety sheet, which can safety questions, please contact:
on receipt. We reserve the right to alter product constants within the scope of technical be obtained from our sales offices.
progress or new developments. The recommendations made in this leaflet should be No. 51 Nianhua Rd, High-
checked by preliminary trials because of conditions during processing over which we Tech Industrial Park, Quzhou,Zhejiang,
have no control, especially where other companies’ raw materials arealso being used. China
The recommendations do not absolve the user from the obligation of investigating the :
Tel 0570-8357008
possibility of infringement of third parties’ rights and, if necessary, clarifying the :
Email fushite@aliyun.com
position. Recommendations for use do not constitute a warranty,either express or :
Web www.fushite.com
implied, of the fitness or suitability of the products for a particular purpose.
Version 2.0 Fumed Silicone Rubber for Molding 2020-04 Page 2/2
浙江富士特硅材料
ZHEJIANG FUSHITE SILICON CO.,LTD
Product data
Property FST-8050J
FST-8020J FST-8060J FST-8070J FST-8080J
Appearance Transparent
)
Tensile strength(Mpa ≥ 8.5 8.6 8.3 8.3
Elongation at break(≥%) 580 600 460 300
Breaking set(%) 6 8 10 8
Tear strength(KN/M) 33 33 36 28
Dielectric strength(KV/mm≥) 22 22 22 22
Volume resistivity(Ω.cm≥)
Flame retardancy FV-1 FV-1 FV-1 FV-1
*These figures are intended as a guide and should not be used in preparing specifications.
• Curing agent : C-8 (2,5-dimethyl 2,5-di(t-butyl peroxy) hexane paste ) 1.0 phr
• Curing condition : 170℃×5min
• Curing agent : C-8 (2,5-dimethyl 2,5-di(t-butyl peroxy) hexane paste ) 1.0 phr
• Curing condition : 170℃×5min
These figures are intended as a guide and should not be used in preparing specifications.
The data presented in this leaflet are in accordance with the present state of our knowledge, but Detailed safety information is contained in each For technical, quality, or product
do not absolve the user from carefully checking all supplies immediately on receipt. We reserve material data safety sheet, which can be obtained safety questions, please contact:
the right to alter product constants within the scope of technical progress or new developments. from our sales offices.
The recommendations made in this leaflet should be checked by preliminary trials because of No. 51 Nianhua Rd, High-
conditions during processing over which we have no control, especially where other companies’ Tech Industrial Park, Quzhou,Zhejiang, China
raw materials arealso being used. The recommendations do not absolve the user from the
obligation of investigating the possibility of infringement of third parties’ rights and, if necessary, :
Tel 0570-8357008
clarifying the position. Recommendations for use do not constitute a warranty,either express or :
Email fushite@aliyun.com
implied, of the fitness or suitability of the products for a particular purpose. :
Web www.fushite.com