Professional Documents
Culture Documents
com
Dtf-A3 Manual
Ⅰ.Production Specifications
Print
2880/1440DPI Print size A3(297*420mm)
Resolution
Ink
1 ㎡/20ml System Windows
Consumption
Color
Continuous Ink supply . Automatic
Ink Supply CMYK+WW
timely white ink stirring
Configuration
Output of
Same output of color and white ink Package Wood Crate
white ink
Machine
AC100~230V/Optional according to
Voltage/Plug L78*W32*H22cm
different country
Dimension
(1)Product introduction
Dtf printer applies to 4 color printing and the print effect can match with photo .Besides, it
is widely used in garments and various fabrics with the high temperature resistance due to
Printhead
Output of
pet film
Ink
Keys of
control panel
Intelligent
temperature
Controller
(4)Introduction to Keys
Power
Press this button to switch on and off the power
Supply
Press this button to move the printhead to the cartridge and change
location.
When inspect the status of cartridge , press this button to move the
printhead to the print position of ink
Ink
After changing the cartridge, press this button to return the print head to
the initial position.
When the ink indicator lights go out, press the button for 3 seconds to
clean the print head.
Set key
Add key
Set key
Subtract key
(3) Connect the power cable and the usb data cable . Press the power button
(4) Put a pet film into the feeder and press the button of paper shortage to
P.S. The side with matte of pet film must put on the front side.
(2) Use syringes , glue syringe needles and draw out 2-3ml ink from all ink
sarcs respectively.
P.S. Try to avoid the outflow of ink and hold the hard part of ink sac during
Website:www.punehod.com TEL:+86 13332935403
*The manual is just for reference due to irregular update.
www.punehod.com
operation
3.Driver installation
(1).Turn on the printer and plug the printer usb cable into the computer
Computer" - "Properties"
(4). Find the corresponding driver in the U disk and install it.
For the WIN10 system, add the "PartnerV9" folder to the white list in your
(3). Insert the data USB disk for software installation and install the software in
(4).Software introduction
Language change
Printer interface
(2)Select the image that you want to print and adjust the size and
position
Website:www.punehod.com TEL:+86 13332935403
*The manual is just for reference due to irregular update.
www.punehod.com
(4)Open and check the print setting , select correct print port .
(6)When the printing is done , put the pet film into powder and shake to
(7) Set the oven at 95-100°c for 200 seconds to cure the powder
(8) Set the heat press machine at 160 ° c for 40 seconds to start heat
press transfer
2. put the textile on the shielding paper .put the printed pet film on the
3. put the other shielding paper on the top and set time /temperature
4. When the heat press transfer is done , cool the pet film for a few
seconds . then tear the pet film carefully from the textile and you’ll get a
finished product
III.Maintenance
1. Work environment
The best working environment temperature 25-30 degrees,
humidity above 50%
2. The ink
Please try to use up the ink within 3 months after opening to avoid
spoilage.
right (this is to make the print head and the waste ink pump fit
closely to prevent the print head from clogging) .
Clean and suck the ink on the left side of the machine regularly
Clean the black lubricating oil on the ink car guide rail regularly,
and add new lubricating oil to keep the ink car guide rail smooth.
Clean the grating strips regularly with alcohol and dust-free cloth
to ensure the printing accuracy.