You are on page 1of 133

HPL/TPNODL/KITKAT/TN-165/21-22/01 Date:- 26/02/2022

The HOG (Contracts)


Tata Power Northern Odisha Distribution Limited
Contracts & Material Management Department,
Corporate Office, Januganj,
Balasore - 756019

Sub:- Submission of Tender Fees Against T No TPNODL/OT/2021-22/165 For the Supply of


KITKAT Fuses.

Dear Sir,

We M/S HPL Electric & Power Ltd, hereby submitting Tender Fees of Rs 5,000/- (Rupees Five
Thousand Only) against T No TPNODL/OT/2021-22/165 For the Supply of KITKAT FUSES
Through NEFT (UTR No IBKL220225123926) Dated 25/02/22 from IDBI Bank Ltd.

Please consider and acknowledge.

Thanking you,
Yours faithfully

For HPL Electric & Power Ltd.

Gurjeet Singh Bhamra


AGM Utility
HPL/TPNODL/KITKAT/TN-165/21-22/02 Date:- 07/03/2022

The HOG (Contracts)


Tata Power Northern Odisha Distribution Limited
Contracts & Material Management Department,
Corporate Office, Januganj,
Balasore - 756019

Sub:- Submission of EMD Against T No TPNODL/OT/2021-22/165 For the Supply of KITKAT


Fuses.

Dear Sir,

We M/S HPL Electric & Power Ltd, hereby submitting Tender Fees of Rs 200,000/- (Rupees Two
Lakh Only) against T No TPNODL/OT/2021-22/165 For the Supply of KITKAT FUSES
Through BG (BG No 0480322BG0000182) Dated 05/03/22 from SBI Bank.

Please consider and acknowledge.

Thanking you,
Yours faithfully

For HPL Electric & Power Ltd.

Gurjeet Singh Bhamra


AGM Utility
Tender No. : TPNODL/OT/2021-22/165

ANNEXURE III Schedule of Deviations

S.No. Clause No. Required as per TPNODL specification Details of deviation with justification

Live parts of the Fuse carrier shall be


1 5.7.2 covered either by a shield for barrier of Not possible
insulating materials
Cannot be round or elliptical due to
Spring for base phosphor bronze
space constraint, but will be of FORM
2 5.9 contact(for 200A to 500A only): should
Spring in Spring steel with sheet
be round or elliptical
thickness ≥ 1 mm

The current carrying screws & washers Steel screws duly Zinc passivated will
3 5.12 (iii)
shall be of tinned brass. be provided

As per pre-bid clarification, Embossing


These 3 matters will be taken care of
to be done for Size of Fuse wire,
4 6 (4,5,6) by means of Pad printing. Embossing is
Property of "TPNODL, Balasore" & Date
practically not possible.
of manufacturing

Rated breaking As per pre-bid clarification, 6kA for 200A; Not possible to provide as asked in KITKAT
5
capacity 8kA for 400A & 10kA for 500A Fuse. It will be 4 kA for all the ratings.

For 300A & 400A it's 433V & for 500A it's
6 Rated voltage Ue 415V for 200A, 300A, 400A & 500A
630V

We confirm that there are no deviations apart from those detailed above.

Date: 07-03-22 Signature with seal of manufacturer


T. NO. TPNODL/OT/2021-22/165 RATE CONTRACT FOR THE SUPPLY OF KITKAT FUSES

DECLARATION

I, Gurjeet Singh Bhamra AGM –Utility of HPL Electric & Power Limited, with registered
office at 1/20, Asaf Ali Road, New Delhi -110002 being its authorized signatory, do
hereby declare that the company i.e HPL Electric & Power Ltd is not blacklisted in any
utility.

For HPL Electric & Power Ltd.

Gurjeet Singh Bhamra


Auth . Signatory

T. No : TPDDL/ENGG/ENQ/200001372/21-22

You might also like