Professional Documents
Culture Documents
I. SET A
1
29. Is the placement of products, materials, utilities and accessories that go
into the land around the house, or on the site that the house is built on? (a.
Site work b. Soil product c. Soil poisoning )
30. Polypropylene plastic (PP) - is fit to be used outdoors. (a. False b. True c. None
of the above)
31. Polymethyl methacrylate (PMMA) - Thermoplastic resin is also called organic
plastic. it has the disadvantages of poor abrasive resistance and high price. (a.
False b. True c. None of the above)
32. Polyester resin (PR) - has the properties of good bonding capacity, elasticity,
flexibility, non heat resistance and water resistance. (a. False b. True c. None of
the above)
33. Are materials in the form of powder or fluids that are added to the concrete to
give it certain characteristics not obtainable with plain concrete mixes. (a.
Admixtures b Drugs c. Medicine )
34. Polyethylene Plastic (PE) - Water non resistant and quite flexible in low
temperature(a. False b. True c. None of the above)
35. Polyvinyl chloride plastic (PVC) - has better chemical stability and aging
resistance, but best heat resistance. (a. False b. True c. None of the above)
36. Polystyrene plastic (PS) - has the merits of bad light transmittance, easy
pigmentation, better chemical stability, water resistance, light resistance, easy
processing, and low price. (a. False b. True c. None of the above)
37. may be defined as the science of artificial application of water to the land or soil
(a. Irrigation b. Concrete c.asphalt )
38. is a sticky, black and highly viscuos liquid or semi-solid that is present in most
crude petroleums and in some natural. (a. Asphalt b.Concrete c.Bituminous )
39. is a device that regulates, directs or controls the flow of a fluid (gases,iquids,
fluidized solids, or slurries) by opening, closing, or partially obstructing various
passageways deposits. (a. Valves b. Faucet c. Bibb)
40. soil material used to fill excavation (a. Backfill b.Soil c.Mud)
41. removal of material encountered above sub-grade elevations and to lines and
dimensions indicated (a. Excavation b.Soil c.Mud)
42. Speed up the hydration (hardening) of the concrete. (a. Accelerators b.
Retardants c. Retardates)
43. on-site underground pipes, conduits, ducts, and cables, as well as underground
services within buildings (a. Utilities b.technology c. Underground materials)
44. is the term given to either temporary or permanent molds into which concrete or
similar materials are poured. (a. Formwork b. Reinforced Concrete c. Pre cast)
45. Add and entrain tiny air bubbles in the concrete, which will reduce damage
during freeze-thaw cycles, thereby increasing the concrete's durability. (a. Air
entrainments b. Plasticizers c. Super Plasticizers)
46. Increase the workability of plastic or "fresh" concrete, allowing it be placed more
easily, with less consolidating effort. (a. Plasticizers b.Air entrainments c. Super
Plasticizers)
47. are used to create a bond between old and new concrete (typically a type of
polymer) (a. Bonding agents b. Plasticizers c. Super Plasticizers)
2
48. (Also called high-range water-reducers) are a class of plasticizers that have
fewer deleterious effects and can be used to increase workability more than is
practical with traditional plasticizers. (a. Super Plasticizers b.Air entrainments b.
Plasticizers)
49. The art of shaping, arranging, and uniting stone, brick and building block to form
walls and other parts of the building. .(a. Masonry b. Plain concrete c. Precast c.
Pre stressed)
50. Walls may be used by giving them special treatment to make them as smooth as
possible.(a. Masonry b. Plain concrete c. Precast c. Pre stressed) .(a. Plain
concrete b. Precast c. Pre stressed)
II. SET B
DRAW AND SKETCH a detailed section of a stair and show the parts in
English/Tagalog terms and explain its function.
(sketch on paper)
stair balusters/barandilla
stair handrail/gabay
landing/mesa pahinga
riser/senepa
thread/roskas
stair stringer/meduda