Professional Documents
Culture Documents
CMM 26 20 31 Rev 6 Dated Jan 2019
CMM 26 20 31 Rev 6 Dated Jan 2019
HIGHLIGHTS
Pages which have been added or revised are outlined below together with the highlights of the main
revisions.
Remove the affected pages as listed and insert the replacement pages.
Complete the required actions to the Record of Revision sheet at entry REV No. 6.
26-20-31
Highlights Page 1
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
Highlights Page 2
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
PART NUMBER
BA21783-BA20789-BA22594
26-20-31
Title Page 1
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
Title Page 2
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
RECORD OF REVISIONS
Retain this record in front of manual. On receipt of revisions, insert revised pages in
manual and enter revision number, date inserted and initial.
- Nov 92
1 Jul 08
2 Sep 14
3 Jan 14
4 Nov 17
5 Jul 18
6 Jan 19
26-20-31
ROR Page 1
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
ROR Page 2
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
ROTR Page 1
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
ROTR Page 2
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
SB Page 1
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
SB Page 2
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
5 Jan 19
Check
6 Jan 19
Repair 9 Jan 19
26-20-31
LEP Page 1
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
LEP Page 2
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
TABLE OF CONTENTS
PAGE
CLEANING 5
CHECK 5
REPAIR 9
26-20-31
TOC Page 1
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
TOC Page 2
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
INTRODUCTION
1. General.
This manual has been compiled in accordance with the requirements set out in
specification ATA 100. It is intended to provide such data as is necessary for an
approved repairer to return an unserviceable Fire Extinguisher Assembly to a
serviceable condition.
2. Manufacturing.
3. Layout.
This manual contains a general description and operation followed by data for
maintenance, repair, disassembly and assembly of the Fire Extinguisher Assembly.
This followed by an Illustrated Parts List, which gives detailed information.
4. Revision Service.
26-20-31
INTRO Page 1
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
INTRO Page 2
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
A. DESCRIPTION
(1) This manual contains maintenance and overhaul instructions for Aircraft
Cabin Portable Fire Extinguishers, type numbers:
(2) BCF (Halon 1211) extinguisher vessel contains extinguishing agent BCF
(Halon 1211). The containers are pressurized with Dry Nitrogen. Actuation of
the extinguisher is accomplished by manual trigger action.
(4) Some of the Fire Extinguishers in the part number BA20789 series and
BA22594 series are fitted with a special discharge nozzle that enables the
extinguisher to be used in a flush mounted bulkhead fitting.
(5) The UK standard colour for all BCF (Halon 1211) extinguishers is green.
(6) Suffix letters to the part numbers of extinguishers are defined as follows:
(7) Refer to section 7 of this CMM, Illustrated Parts List, and Service Information
Letter, SIL 26-127, for current replacement part information.
(8) IMPORTANT
The transit pin, Illustrated Parts List item 130 and figure 1, must be removed
when installing the extinguisher into the airframe-mounting bracket. The
safety pin and label must be returned to stores for safe retention.
26-20-31
Page 1
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
NOTE: * ALL WEIGHTS NOMINAL. For ‘Check Weight’ always refer to extinguisher label and
base of container, where the check weight is repeated
26-20-31
Page 2
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
B. OPERATION.
(4) Squeeze trigger. This fractures the frangible seal on the syphon tube assembly
discharging the contents through nozzle. On releasing the trigger, the spring
forces the cylindrical piston onto the secondary seal ‘O’ ring thus interrupting
the flow of extinguishant and preventing leakage of any remaining agent in the
container.
(5) Operation of the trigger also fractures the indicator disc Fig 1 (140) REF,
causing it to eject from the discharge head assembly Fig 1 (100), thus providing
a visual indication that the extinguisher has been used.
(6) The optimum distance from the fire for effective firefighting, is between 4 and 6
feet, with the extinguisher held within 30° either side of vertical.
26-20-31
Page 3
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
Page 4
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
2. CLEANING
A. General
(1) No Special materials are required for cleaning. The outside of extinguishers
should be cleaned with cotton wipers, removing grease and dust etc.
(2) Discharge Heads should be clean and free from foreign objects.
3. CHECK
A. General
(2) Discharge head and indicator disc must be removed from the extinguisher
before checking the following:
Check for smooth operation, by squeezing operating lever (trigger). If action
feels sluggish, stiff or has a tendency to stick it must be replaced in
accordance with Section 4, Maintenance and Overhaul Section 4B.
26-20-31
Page 5
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
Page 6
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
A. General
NOTE: The overall life of the Fire Extinguisher is 10 years, during that period
no hydrostatic testing of the Fire Extinguisher (pressure vessel) is
required.
NOTE: High Resolution Scales = Suitable Capacity, Measure in increments
of 0.001Kg & Currently Calibrated.
(2) The weight check must be performed with the Discharge Head Fig 1
(100) installed and the Transit Pin Fig 1 (130) removed. Any
additional labels the operator / service station may have added to the
assembly must be taken into account.
Place extinguisher on high-resolution scales and check that the
extinguisher weight is within 10 grams (0.352ozs) of that stated on
the back screen-printed label, or neck of cylinder, and/or on concave
base of container where the check weight is repeated. Extinguishers
under specified weight/tolerance must be rejected.
26-20-31
Page 7
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
B. Extinguisher Overhaul
NOTE 1: The overall life of the Fire Extinguisher is 10 years, during that period
no hydrostatic testing of the Fire Extinguisher (pressure vessel) is
required.
(1) Unscrew the discharge head assembly Fig (100) from the used
container Fig 1(10). Discard the container.
(2) Remove old indicator disc Fig 1(140) shear legs (coloured red) from
the discharge head assembly Fig 1 (100) by pushing them through
and out of the hole provided for indicator disc.
(3) Ensure old syphon tube assembly ‘pip’ is removed from inside
discharge head assembly.
(6) Install serviceable discharge head Fig 1(100) onto fully charged
container Fig 1(10). Do not overtighten discharge head.
26-20-31
Page 8
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
5. REPAIR
A. General
Repair of detailed parts is not considered practical. Parts that do not meet
inspection requirements must be replaced.
A. General
(1) Assembly of the extinguisher and bracket to the aircraft is the responsibility
of the aircraft operator or the aircraft OEM.
B. Storage
26-20-31
Page 9
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
Page 10
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
This section provides illustrations and parts breakdown of all parts of the fire
extinguisher, which can be dis-assembled, repaired, or replaced and
reassembled.
(1) Introduction.
The introduction contains all explanatory information for the individual
sections, as is necessary for the use of this IPL. The introduction also
contains a list of abbreviations used in the detailed parts list.
d) Column NOMENCLATURE
The Nomenclature column gives the name of each assembly or part.
Details of an assembly are listed immediately after the assembly and
indented one dot to the right to indicate relationship.
26-20-31
Page 11
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
C. List of Abbreviations
Including Inc. -
Paragraph Para -
Reference RF -
Revision Rev -
SUPSD by Superseded by -
26-20-31
Page 12
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
Page 13
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
26-20-31
Page 14
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
100 140
130
IMPORTANT.
Obey transit pin label
instructions when installing
the extinguisher into the
airframe mounting bracket.
Return pin and label to
stores.
FIRE EXTINGUISHER
FIGURE 1
26-20-31
Page 15
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
Units
Fig. Airline Nomenclature
Part Number Eff Code per
Item Code 1234567
assy
26-20-31
Page 16
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
Units
Fig. Airline Nomenclature
Part Number Eff Code per
Item Code 1234567
assy
26-20-31
Page 17
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
Units
Fig. Airline Nomenclature
Part Number Eff Code per
Item Code 1234567
assy
26-20-31
Page 18
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
Units
Fig. Airline Nomenclature
Part Number Eff Code per
Item Code 1234567
assy
10 BA40025-2 2.5kg Container BCF A, C, J, 1
M, W, Z,
26-20-31
Page 19
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
Unit
Fig. Airline Nomenclature s
Part Number Eff Code per
Item Code 1234567
ass
y
-70 22410-101 Transport cap 1
26-20-31
Page 20
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
10
BRACKETS
FIGURE 2
26-20-31
Page 21
Rev 6
Jan 2019
FFE Ltd.
COMPONENT MAINTENANCE MANUAL
BA21783 Series, BA20789 Series, BA22594 Series
Units
Fig. Airline Nomenclature
Part Number Eff Code per
Item Code 1234567
assy
26-20-31
Page 22
Rev 6
Jan 2019