Professional Documents
Culture Documents
NIM : 2111521007
Kelas : A Jaringan dan Komunikasi Data
Latihan Chapter 3
1. What is different about the method used to boost a digital signal's strength, compared
with the method of boosting an analog signal's strength?
Jawab : D. A digital signal requires an amplifier, which introduces noise into the signal,
and an analog signal requires a repeater, which retransmits the signal in its original form.
2. Which of the following decimal numbers corresponds to the binary number 00001001?
Jawab : D. 9
3. A wave with which of the following frequencies would have the shortest wavelength?
Jawab : D. 100 GHz
8. You are helping to install a cable broadband system in your friend's home. She wants to
bring the signal from where the service provider's cable enters the house to a room on
another floor, which means you have to attach a new cable to the existing one. What type
of cable should this be
Jawab : A. RG-6
9. With everything else being equal, a network using which of the following UTP types
will suffer the most cross talk?
Jawab : A. CAT 3
11. Which of the following network transmission media offers the highest potential
throughput over the longest distance?
Jawab : B. SMF
12. In which of the following network links might you use MT-RJ connectors?
Jawab : D. Fiber-optic connection between a server and router.
13. Fiber-optic cable networks can span much longer distance than copper-based networks
before requiring repeaters because:
Jawab : A. They use wavelength division multiplexing
15. Which of the following is a potential drawback to using fiber-optic cable for LANs?
Jawab : A. It is expensive
16. In what part of a structured cabling system would you find user's desktop computers?
Jawab : D. Work area
17. Every user at one location on your company's WAN is unable to reach the Internet. Your
colleague on the network management team suspects a critical router is unable to connect
to the network. Because you're in the building affected by the outage, she asks you to
troubleshoot the router. You confirm that the router is not responding to any requests
over the network. Which of the following do you use to connect directly from your laptop
to the router to diagnose it?
Jawab : C. Serial cable
18. What is the maximum distance specified in the structured cabling standard for a
horizontal wiring subsystem?
Jawab : C. 100m
19. How many wire pairs can a single 110 block terminate?
Jawab : D. It depends on the type of 110 block.
20. Your campuswide WAN is experiencing slow Internet response time. When you call your
Internet service provider to ask if they can troubleshoot the problem from their end, they
warn you that their responsibilities end at the demarc. What do they mean?
Jawab : B. They will not diagnose problems beyond your organization's entrance
facilities.