Professional Documents
Culture Documents
NTB02 091
NTB02 091
SERVICE INFORMATION
• Refer to the “Essential Tool Shipment” flyer (on page 3) for additional information.
• This special tool is “Essential” and has been automatically sent to all Nissan dealers.
• Your dealership non-vehicle account will be charged $9.84 each, plus applicable taxes
and freight.
• Use this tool in place of KV31103600 shown in the applicable Service Manual.
TP020007
1/3
2002 Nissan
EG-130-02-05
The following service tools have been classified essential by Nissan North America, Inc.
J-44200-CC
CONSULT-II Converter & Cable Set
Application: 350Z
Note: This special service tool replaces your old
CONSULT-II cables for use with all CONSULT-II CONSULT-II Converter and Cable Set J-44200-CC
compatible vehicles. The Converter is required for the CONSULT-II "CAN" LED
Converter: J44200-50
CONSULT-II to communicate with the 350Z and other
DDL Port
future models equipped with a new CAN (Controller (on CONSULT-II) DLC-II Cable
(J44200-40)
Velcro strap
The cable set features a heavy duty connection
TP020328
between the new CONSULT-II pigtail and the DLC-I
or DLC-II cables. This will help prevent data transfer
interruptions and ECM/TCM damage during repro-
gramming. Please refer to NTB02-076 for further
information.
TP020359a
2/3
J-45295
TPMS Initialization Tool
Application: 350Z
Note: This Tire Pressure Monitoring System initialization
tool is required to program the pressure sensors on
the 350Z and future models equipped with a Low Tire
Pressure Warning System. It may be used with or
without the CONSULT-II to register each sensor to
the vehicle.
J-45815
A/C Disconnect Tool Set
Application: 350Z
Note: This three-piece metric A/C Line Disconnect
Tool Set is identified in the ESM for 350Z. These
tools are required to disconnect the "one touch" style
A/C line fittings on this vehicle. Previous fractional
inch sized A/C coupling tools are not compatible with
the new fittings.
J-45674
AT Line Pressure Adapter
Application: 350Z
Note: This adapter is used with essential Line
Pressure Gauge Set J-34301-C and is required to
perform oil pressure test procedures on this vehicle.
It converts NPT to M10 threads with an O-ring.
Please store the adapter with the J-34301-C Kit
when not in use.
J-38873-A
Drive Plate Installer
Application: Altima, Sentra
Note: This special service tool is required for A/C
Clutch installation per the ESM on Altima, Sentra,
and future models. It is not necessary to replace the
compressor assembly for an A/C clutch incident.
Refer to NTB02-057 for this procedure on the 2002
Altima.
These essential tools will be invoiced to your Nissan non-vehicle account at $840.24 (plus appropriate
taxes and freight) in accordance with your dealer agreement with Nissan North America, Inc.
Promotion # NI02-122
TP020359b
3/3