Professional Documents
Culture Documents
Page 1 of 8
Fechar o SIS
Tela anterior
Especificações
C7 Engines for Caterpillar Built Machines
Número de Mídia -SENR9938-20 Data de Publicação -01/01/2010 Data de Atualização -29/01/2010
i02703947
S/N - 5251-UP
S/N - 5351-UP
S/N - 5451-UP
S/N - A3R1-UP
S/N - A6P1-UP
S/N - AZP1-UP
S/N - B3T1-UP
S/N - B9D1-UP
S/N - B9G1-UP
S/N - B9M1-UP
S/N - BFC1-UP
S/N - BNW1-UP
S/N - BPW1-UP
S/N - BTK1-UP
S/N - BXW1-UP
S/N - BYS1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 2 of 8
S/N - C3N1-UP
S/N - C4H1-UP
S/N - C7K1-UP
S/N - C8L1-UP
S/N - C9M1-UP
S/N - CJX1-UP
S/N - CZF1-UP
S/N - D9G1-UP
S/N - DBH1-UP
S/N - DFP1-UP
S/N - DJF1-UP
S/N - DTZ1-UP
S/N - EAD1-UP
S/N - EBM1-UP
S/N - EDF1-UP
S/N - EJC1-UP
S/N - FAC1-UP
S/N - GBR1-UP
S/N - GPB1-UP
S/N - GTN1-UP
S/N - J5J1-UP
S/N - J6J1-UP
S/N - JAD1-UP
S/N - JAP1-UP
S/N - JAT1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 3 of 8
S/N - JBP1-UP
S/N - JGK1-UP
S/N - JHJ1-UP
S/N - JJA1-UP
S/N - JJG1-UP
S/N - JPA1-UP
S/N - JZR1-UP
S/N - K5K1-UP
S/N - K6K1-UP
S/N - KAY1-UP
S/N - KBE1-UP
S/N - KDG1-UP
S/N - KGG1-UP
S/N - LAB1-UP
S/N - M1G1-UP
S/N - M3G1-UP
S/N - M5G1-UP
S/N - MAL1-UP
S/N - MCL1-UP
S/N - MKR1-UP
S/N - MNB1-UP
S/N - MND1-UP
S/N - N1A1-UP
S/N - N4A1-UP
S/N - PAK1-UP
S/N - PAL1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 4 of 8
S/N - PBK1-UP
S/N - PKE1-UP
S/N - PYT1-UP
S/N - RJK1-UP
S/N - RSK1-UP
S/N - SCR1-UP
S/N - SCY1-UP
S/N - SRC1-UP
S/N - SYM1-UP
S/N - SZL1-UP
S/N - SZM1-UP
S/N - SZN1-UP
S/N - TPM1-UP
S/N - TRH1-UP
S/N - TSN1-UP
S/N - WDK1-UP
S/N - WLT1-UP
S/N - XDB1-UP
S/N - YFW1-UP
S/N - Z2X1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 5 of 8
Illustration 1 g01356572
(1) Exhaust valve
Note: The inlet and exhaust valve stems must be coated with clean unused engine oil prior to installation
in the cylinder head.
Note: The tips of the inlet and exhaust valves must be coated with 8T-2998 Lubricant . The lubricant
must be applied after assembly of the retainer.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 6 of 8
Note: Install the valve guide from the spring side of the cylinder head. Check the diameter of the valve
guide bore for distortion after installation into the cylinder head.
Note: The inlet valves and exhaust valves may be reused if the valve stems are not greater than the
minimum diameters.
Note: After you press the valve guide into the cylinder head, install the seal onto the top of the valve
guide.
Note: The inlet valve guides and the exhaust valve guides can be reused if the valve guide bores are not
greater than the maximum diameters.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 7 of 8
Illustration 2 g01356581
Inlet valve seat insert ... 42.000 ± 0.013 mm (1.6535 ± 0.0005 inch)
Exhaust valve seat insert ... 46.000 ± 0.013 mm (1.8110 ± 0.0005 inch)
Diameter of the bore in cylinder head for the valve seat insert
Inlet valve seat insert ... 41.931 ± 0.013 mm (1.6508 ± 0.0005 inch)
Exhaust valve seat insert ... 45.931 ± 0.013 mm (1.8083 ± 0.0005 inch)
Note: The valve seat insert must be shrunk by reduced temperature before the valve seat insert is
installed in the head.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 8 of 8
(E) Depth of the bore that is machined into the cylinder head for the valve seat insert
Inlet valve seat insert ... 9.00 ± 0.05 mm (0.354 ± 0.002 inch)
Exhaust valve seat insert ... 10.00 ± 0.05 mm (0.394 ± 0.002 inch)
(F) Angle of the valve seat that is ground into the valve seat inserts
Note: Do not reuse the valve seat inserts if the outside diameter of the valve seat is larger than the
following values.
(G) Outside diameter of the valve seat that is ground into the face of the valve seat insert
Note: The inlet valves and the exhaust valves can be reused if the valve lips are not smaller than the
minimum dimensions.
(J) Distance from the head of the valve to the face of the cylinder head
Inlet valve
Exhaust valve
Note: Ensure that the valve is fully closed in order to measure this value.
Direitos Autorais 1993 - 2018 Caterpillar Inc. Tue Feb 6 04:56:07 PST 2018
Todos os Direitos Reservados.
Rede Particular Para Licenciados SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018