Professional Documents
Culture Documents
Page 1 of 6
Fechar o SIS
Tela anterior
Especificações
C7 Engines for Caterpillar Built Machines
Número de Mídia -SENR9938-20 Data de Publicação -01/01/2010 Data de Atualização -29/01/2010
i03015872
Crankshaft Seals
SMCS - 1160; 1161
S/N - 5251-UP
S/N - 5351-UP
S/N - 5451-UP
S/N - B9D1-UP
S/N - B9G1-UP
S/N - B9M1-UP
S/N - D9G1-UP
S/N - DTZ1-UP
S/N - J5J1-UP
S/N - J6J1-UP
S/N - JAD1-UP
S/N - JAP1-UP
S/N - JAT1-UP
S/N - JBP1-UP
S/N - JJA1-UP
S/N - JPA1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 2 of 6
S/N - K5K1-UP
S/N - K6K1-UP
S/N - M1G1-UP
S/N - M3G1-UP
S/N - M5G1-UP
S/N - MAL1-UP
S/N - MND1-UP
S/N - N1A1-UP
S/N - N4A1-UP
S/N - PYT1-UP
S/N - SZL1-UP
S/N - SZM1-UP
S/N - SZN1-UP
S/N - YFW1-UP
Note: For the complete procedure on removing and installing the crankshaft seals, refer to Disassembly
and Assembly.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 3 of 6
Illustration 1 g01355051
Note: The front crankshaft seal and the crankshaft seal excluder are serviced separately.
(1) Install the front crankshaft seal. Ensure that the front face of the crankshaft seal is 2.5 mm (0.10
inch) from the front housing (3) .
(2) Before installing the crankshaft seal excluder onto the crankshaft , lubricate the inside diameter of
the crankshaft seal excluder sparingly with liquid soap.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 4 of 6
Illustration 2 g01133077
Note: The shipping sleeve (5) must not be removed prior to the installation of the front crankshaft seal.
If the shipping sleeve has been removed prior to installation of the front crankshaft seal, the front
crankshaft seal should not be used.
Install the front crankshaft seal (1) in the front housing. Remove the shipping sleeve (5) . Install the
crankshaft pulley (4) .
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 5 of 6
Illustration 3 g01355064
(6) Install the rear crankshaft seal into the carrier housing or the flywheel housing (7) . After installation
of the rear crankshaft seal, ensure that the rear face of the seal is 16.0 ± 0.5 mm (0.63 ± 0.02 inch) from
the rear face of the engine block (8) .
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4989 ... Page 6 of 6
Illustration 4 g01526794
(6a) Single lip seal that is used for dry applications
Note: The wear sleeve (9) must not be removed from the rear crankshaft seal at any time. If the wear
sleeve is removed from the rear crankshaft seal, the rear crankshaft seal should not be used.
Direitos Autorais 1993 - 2018 Caterpillar Inc. Tue Feb 6 05:00:10 PST 2018
Todos os Direitos Reservados.
Rede Particular Para Licenciados SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/p... 6/2/2018