Professional Documents
Culture Documents
Marks Obtained
Group Member Group Member Group Member
1 2 3
NAME
REGISTRATION #
LAB REPORT
PERFORMANCE
TOTAL MARKS
________________________________________________________________________
Experiment # 04 Page 1 of 3
Electronic Circuit Design Lab
_________________________________________________________________________
PURPOSE
The purpose of this lab is to study the VI characteristics of SCR
READING
1. Power amplifier basics explained wonderfully
http://www.electronics-tutorials.ws/power/thyristor.html
2. Section 11.2 of Floyd (textbook)
3. Tutorial on SCR Operation
OBJECTIVE
REQUIRED EQUIPMENT
EXPERIMENT PROCEDURE
________________________________________________________________________
Experiment # 04 Page 2 of 3
Electronic Circuit Design Lab
_________________________________________________________________________
4. Set V2=0
5. Increase V1 to 8V.
7. What does the reading of voltmeter shows; include this in your report.
8. Now increase V2 until gate is triggered and notes the latching current from A2.
10. Now once the gate is triggered then increase V1 in steps and note A1 and V1
________________________________________________________________________
Experiment # 04 Page 3 of 3
Electronic Circuit Design Lab