You are on page 1of 7

DEPARTMENT OF AVIONICS ENGINEERING

TRANSMISSION LINES & WAVEGUIDES

NAME: AYESHA SADDIQA


REG NO: 200701027
ASSIGNMENT: #1
BATCH: Ave-06
Submitted to: Dr. Amin
TASK:
1- Do impedance matching of the antenna at f = 262 MHz using single stub
matching. Find the bandwidth of the impedance-matched antenna if the
maximum reflected power should not exceed 10%.
CODE:
OUTPUT:

PLOT:
TASK2:
2-Do impedance matching of the antenna at f = 300 MHz MHz using quarter
wave transformer by finding value of ZoT (The chracteristic impedance of the
quarter wave transmission line). Find the bandwidth of the impedance matched
antenna if the maximum reflected power should not exceed 10%.
CODE:
OUTPUT:
TASK3:
3-Do impedance matching of the antenna at f = 336 MHz MHz using single
stub matching to eliminate the reactance of the antenna and using quarter
wave transformer by finding value of ZoT (The chracteristic impedance of the
quarter wave transmission line) to transform real part of the Zin (100 ohms)
to 50 ohms. Find the bandwidth of the impedance matched antenna if the
maximum reflected power should not exceed 10%.

CODE:
OUTPUT:

You might also like