Professional Documents
Culture Documents
Cylinder Color
· R-134a
What craft did Egyptians and Indians employ in the past to store and cool liquids?
· Freon
Which of the following statements is accurate concerning the Occupational Safety and Health
Administration's (OSHA) particular standards for electrical installations?
· Emergency STOP controls can be installed in the electrical lines for added safety
· Distribution or entrance panel shout be locked out
· Electrical power should always be shut off
ü All of these
What is the function of this tool?
· Face shield
Cylinder color
· R-410A
It's generally employed in home, commercial, and industrial air conditioning, as well as certain
commercial and industrial refrigeration.
· R-22
If a technician already has this equipment to measure a circuit's current, he or she does not
need to interrupt the circuit to insert an ammeter.
· AC Clamp-on Ammeter
Which of the following is NOT a purpose of a heat gun in diagnosing a refrigerator?
· For heating the entire room
Which of the following is the best instrument for tube bending?
· Flaring tool
You are very likely to be injured if uncontrolled electrical flow happens (for example, if you
touch two live wires).
· Electrical Hazards
What instrument should be used to combine two pieces of metal by deforming one or both to
keep them together?
· Crimping tool
Which of the following does not belong to the group?
· R-422D
He made blocks of ice. Generally, mechanical refrigeration was first designed to produce ice.
· Ferdinand Carre
Refer to this picture
· Hole saw
It is frequently used to clean air-cooled condensers and evaporators.
· Chemical
Cylinder Color
· R-402
Which of the following tools is ideal for fixing insulation and securing low-voltage wiring?
· Stapling tackers
These are typically rectangular or spherical in shape, with stainless steel or glass reflective
surfaces set on ball joints that swivel 360 degrees.
· Inspection Mirrors
This tool functions similarly to a screwdriver, but it features a socket head for hex head screws.
· Nut Drivers
He discovered that under continuous pressure, certain gases condense when they cool.
· Michael Faraday
It is concerned with the cooling of air or liquids in order to provide lower temperatures for
preserving food, cooling beverages, making ice, and a variety of other purposes.
· Refrigeration
They stored ice in deep pits that were filled with straw, weeds, and other items to provide
insulation and preserve it for a long time.
· Fire extinguisher
Refer to this picture
· Jigsaw
How do you reverse the direction of a ratchet box wrench?
· R-407C
It is classified as rotating machinery that might cause bodily harm and property damage.
· Mechanical Equipment
Which of the following is not an ODS refrigerant?
· R-22
Which of the following statements about heat is false?
· The components of this type of refrigerant will evaporate and condense together as one
This tool is useful for stripping wires.
· Wiring tool
Cylinder Color
· R-402B
A Swiss inventor who employed sulfur dioxide as a refrigerant.
· Raoul Pictet
When the flare nut cannot be pulled back far enough for a normal cutter or saw, this tool is
used to cut off the flare.
· Flaring tool
To condition the air and improve indoor air quality, it involves space cooling, heating,
humidification, dehumidification, air filtration, and ventilation.
· Air-Conditioning
Professor Rowland and Molina presented the "ozone theory" that ______ were depleting the
ozone layer.
· CFCs
When working outside, keep the windchill in mind.The wind may quickly remove heat from
your body and give you a?
· Frostbite
The process of removing heat from a location where it is undesirable and transferring that heat
to a location where it makes little or no difference.
· Ice cellars
Which of the following is not a member of the group?
· R-502
This refrigerant is mostly employed in medium and high-temperature refrigeration
applications.Manufacturing and importing were both prohibited as of January 1, 1996.
· R-12
It occurs when electricity runs through your body and has the potential to harm your heart.
· Electrical Shock
It is mostly utilized in older air-conditioning systems and certain commercial refrigeration.
· R-500
What is the KEY difference between a Walk-in cooler and Walk-in freezer?
· Room information
Client C wants to know how long the walk-in cooler pulls the product temperature. What
information to be checked with this scenario?
· Insulation information
Which of the following is NOT considered as Miscellaneous loads information?
· Dimension of the room
What is the height of a typical Walk-in Refrigerator?
· 2.4384 meter
Mr. Dinuldol is planning to purchase a whole Walk-in Freezer as an expansion for his business.
He estimated a 3,000 lbs. of products to be frozen inside the freezer. What dimensions of
freezer would you recommend for Mr. Dinuldol?
· 5x6
An 8 ft. freezer which could contain from 5,692 lbs. to 7,960 lbs. of products. What temperature
would this Freezer produce?
· -10-degree Fahrenheit
What is the two major types of ice that ice machine could produce?
· Flake
This type of ice machine produces large amount of ice but does not have a storage and
dispenser.
· 4 ice cubes
When installing ice machine, what consideration to be made to be sure that you have enough
space for adequate air flow.
· Infrared thermometer
Where does airborne yeast is commonly present?
· Impulse
Which of the following attracts more customer to buy a frozen product?
· 20 hp
Under full load, with every case and walk-in calling for refrigeration, to handle the load all four
compressors must?
· It is easy to operate
Which of the following will NOT happen if defrosting occurs?
· Costs
Direct costs – Sale price = _____.
· Gross Profit
These are usually considered the hourly pay of the technician and what the company paid for
the parts.
· Direct costs
Technicians allowance for snack, gas etc. are examples of?
· Indirect costs
Sales income – Expenses = _____.
· Net profit
Statement 1: It costs a lot more in time and money to bring in a new customer than it does to
keep an existing one. Statement 2: That is why a company should make sure its current
customers are satisfied.
· II, I, III
They are referred as the person who answers the phone to the technician who services the
equipment.
· Employees
The company owner hopes that the ______ will maintain the company image and will take the
organization to a higher level.
· Owner
How many percent is expected for a company to grow per year, if there is not much cash flow
problem?
· 10 percent
Which of the following is TRUE about hiring more employees?