Professional Documents
Culture Documents
GENIOSIL® XT The new polymers have been optimized The resultant compound is a one-compo-
With Outstanding Characteristics so as to be low in viscosity but displaying nent curing elastomer that can be applied
a high number of silyl groups per unit in several layers by spraying, brushing or
GENIOSIL® XT grades expand your for- volume. Consequently, the new polymers rolling. Waterproofing is a major issue as
mulation capabilities with silane-terminat- build up a solid, yet elastic network as moisture damage has become so com-
ed polymers. This is derived not only from they cure. The outcome is that water- mon in most buildings. Besides traditional
their low viscosity but also by the virtue proofing membranes based on these single-ply rolled sealing membranes, liq-
that they are compatible with all other polymers attain high inner strength, remain uid waterproofing systems have become
available GENIOSIL® silane-modified poly- extremely elastic and exhibit outstanding ever popular. Polymer AL 08 will be the
mers. They can be blended at various ra- tear resistance. product of choice where high temperature
tios depending on the desired property and UV stability are imperative.
profile. Model Formulation for a High Strength
Transparent Coating
Guide Recipe WACKER® Polymer AL 08
Base polymer GENIOSIL® XT
Both Types Display: 50 Product %
• Good adhesion to diverse substrates Shore D 36 WACKER® Polymer AL 08 59,5
• Low viscosity Elongation at break [%] 250 WACKER® Plasticizer 1000 26,0
• Unmatched transparency Tensile strength [N/mm²] 8.8 WACKER® Crosslinker ME 60 4,75
• Exceptional elongation Skin formation time [mins.] 95 WACKER® Stabilizer 43 0,5
• Outstanding tear resistance Tear resistance [N/mm] 50 HDK® V15 9,0
• Extreme hardness yet elastic Water absorption < 0.5% WACKER® Catalyst 41 0,25
(after 28 days)
100,0
Individual Formulations will Yield: Viscosity 800 mPa s
• Tin-free systems if desirable
• Re-coatable coatings WACKER® Polymer AL 08 – for Silicone Mechanical Properties Transparent
• High recovery values Coatings Formulation WACKER® Polymer AL 08
Mechanical properties ISO 37 – S2
• Unparalleled performance under
WACKER® Polymer AL 08 is the polymer Tensile strenght at break
dynamic stress 1,2
(MPa)
of choice for compounding of a silicone
Elongation at break (%) 250
Combining Flexibility With Strength roofing coating. This neutral curing poly-
Modulus 100% elongation
The new GENIOSIL® XT grades are silane- mer, can be formulated swiftly and eas- 55
(MPa)
terminated polyethers. As is typical for ily using standard production equipment.
such polymers, these products crosslink It is virtually odorless and meets many Shore A hardness 30
and cure upon contact with atmospheric health and safety requirements. Skin-forming time 15 min
moisture.
Wacker Química do Brasil Ltda., Rua Municipal, 325 (antigo nº 100) - Jd. Alvorada, CEP: 06612-060 -
Jandira - SP, Brazil, Tel. +55 11 4789 8303, info@wacker.com, www.wacker.com/socialmedia
The data presented in this medium are in accordance with the present state of our knowledge but do not absolve the user from carefully checking all supplies immediately on receipt.
7740e/07.19
We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this medium should be checked by preliminary
trials because of conditions during processing over which we have no control, especially where other companies’ raw materials are also being used. The information provided by us does
not absolve the user from the obligation of investigating the possibility of infringement of third parties’ rights and, if necessary, clarifying the position. Recommendations for use do not
constitute a warranty, either express or implied, of the fitness or suitability of the product for a particular purpose.