Professional Documents
Culture Documents
For decades, food and beverage processors Threadlocking hardware on fluid-filler valves,
have relied upon high-performance Loctite® mixer assemblies and conveyor systems
products from Henkel Corporation to solve daily
maintenance challenges. At Henkel, we know the
food and beverage industry and understand your
maintenance challenges – both above and below
the conveyor line.
NSF® H1
Our cutting-edge products offer a comprehensive
breadth of the most relevant agency approvals Cleaning and lubricating conveyor components
and certifications. and process critical pumps and gearboxes
1|
Maintenance Pyramid
C A N A D I A N F O O D I N S P E C T I O N AG E N C Y
Complies with There are over 150 Loctite® products reviewed by the Canadian Food
the Federal Inspection Agency (CFIA) for use in food and beverage plants.
Food, Drug, and Visit www.henkelna.com/cfia for more information.
Cosmetic Act and • Threadlockers • Floor Repair and Coatings
all applicable food • Retaining Compounds • Wearing Compounds
additive regulations. • Lubricants • Gaskets
Loctite® 2046™ Removable • Cleaners • Grouts
Threadlocker Food Compliant • Thread Sealants • Anti-slip Coatings
• Adhesives • Metal Repair
Meets the standards set for use in the manufacture of food equipment.
Loctite® Superflex® RTV Silicone Adhesive Sealant Clear
|| 22
F DA 21 C . F. R . §175.300
In today’s high speed fluid-filling lines, loose fluid-filler valve head cover bolts can cause product damage,
unscheduled line shutdowns, and even product contamination. Prevent these costly events and ensure your food
product’s quality with Loctite® 2046™ Threadlocker.
Loctite® 2046™ Threadlocker may be used as a strengthening or coupling agent for joints on food processing
equipment that may contact all types of food, in full compliance with the Federal Food, Drug, and Cosmetic Act, and
all applicable food additive regulations, including 21 C.F.R. §175.300
BREAKAWAY/
ITEM PACKAGE QUANTITY TEMPERATURE
PRODUCT NAME COLOR CHEMICAL TYPE PREVAIL
NUMBER TYPE / SIZE PER CASE RANGE
TORQUE IN./LBS.
6 dual-cartridge
2046™ Threadlocker 1186840 0.40 fl. oz. (12 ml) syringes and 3 mixing Blue (mixed) Two-part anaerobic adhesive 111 / 63 450°F (232°C)
tips per syringe
Each dual-cartridge syringe of Loctite® 2046™ Threadlocker includes 3 mixing tips. Extra mixing tips are available at an additional cost in bags of 10.
3|
3|
NSF® H1
|4
N S F ® S TA N D A R D 51
Loctite® Superflex® RTV Silicone PRODUCT NAME ITEM PACKAGE TEMPERATURE CFIA
Adhesive Sealant - Clear NUMBER TYPE / SIZE RANGE LISTED
N S F ® S TA N D A R D 6 1
Medium Strength / Oil Resistant- A general- Medium Strength - Semisolid / Blue - Patented semisolid
purpose, medium strength threadlocker with stick formula offers added convenience and portability.
improved oil tolerance. Suitable for 1/4" to 3/4" Like Loctite® 242®, this threadlocker stick is well suited
diameter (6 mm to 20 mm) fasteners. Removable for 1/4" to 3/4" (6 mm to 20 mm) fasteners and is
with hand tools. removable with hand tools. The semisolid formula also
means it won’t spill or leak.
Loctite® 290™ Threadlocker
Medium Strength / Green - A low viscosity, medium Loctite® 480™ Instant Adhesive
strength threadlocker for pre-assembled bolts
up to 1/2" (12 mm) to secure them in place. Seals
porosities in welds and metal parts. Secures Low viscosity, elastomer-modified instant
set screws and other assemblies after settings adhesive. Bonds metals and rubbers.
are completed. Seals welds and porous metal Excellent peel, impact and shear strength.
parts. Protects threads from rust and corrosion. NSF/ANSI 61 certified for potable water.
Localized heating and hand tools are needed
for disassembly.
5|
Loctite® 565™ Thread Sealant Loctite® QuickStix® 561™ Pipe Sealant
Controlled Strength - Formulated specifically for Semisolid stick form is convenient, portable and less
metal tapered pipe thread fittings, this product cures messy. Formulated for fast, reliable curing on metal,
rapidly to provide immediate low pressure sealing. tapered pipe threads and fittings. Provides high
Controlled lubricity prevents galling and protects pressure sealing and withstands continuous operating
from rust and corrosion. Can be used on fittings up temperatures of -65°F to 300°F
to 2" (50 mm) in diameter. (-54°C to 150°C).
Brushes on to form a smooth, corrosion-resistant Steel epoxy in stick form. Cut off a section, knead and
coating. Protects against turbulence, abrasion apply to leaking pipes or damaged equipment. Cures
and cavitation. Resists temperatures up in 10 minutes.
to 200°F (93°C).
|6
N S F ® S TA N DA R D 61 CO N T I N U E D
For use with threadlockers, thread sealants and retaining Forms a flexible, solvent-resistant seal that will not tear
compounds. Activate inactive surfaces. Speed cure times or decay. Seals to 300°F (149°C) and fills gaps to 0.050"
for faster return to service. Speed curing through larger (1.27 mm). Can be used on flexible metal assemblies,
gaps and deep threads. Substantially speed cure times including aluminum surfaces. Easy disassembly and
on cold parts. cleaning. Ideal for on-the-spot and emergency repairs,
or when a conventional gasket is out of stock.
Tip:
Primer is optional with: Active surfaces –
brass, copper, bronze, iron, soft steel, nickel.
TORQUE IN./LBS.
ITEM PACKAGE VISCOSITY TEMPERATURE CFIA
PRODUCT NAME COLOR TYPICAL USE (M10 STEEL NUTS &
NUMBER TYPE / SIZE (cP) RANGE LISTED
BOLTS) BREAK/PREVAIL
For 1/4" to 3/4" 1,300 /
-65°F to 360°F
243™ Threadlocker 1330333 1 liter bottle Blue (6 mm to 20 mm) bolts 3,000 180 / 62
(-54°C to 182°C)
with light oil contamination Thixotropic
248™ Threadlocker 37684 9 g stick
Blue
1/4" to 3/4"
Semisolid 110 / 43
-65°F to 300°F
Stick 37087 19 g stick (6 mm to 20 mm) (-54°C to 150°C)
29005 0.5 ml capsule
29021 10 ml bottle
Wicking grade for -65°F to 300°F
290 Threadlocker
™ 29031 50 ml bottle Green
pre-assembled parts
12 90 / 260
(-54°C to 150°C)
29041 250 ml bottle
29043 1 liter bottle
480™ Prism® 48040 20 g bottle
Black
Instant bonding with high
200 N/A
-65°F to 180°F
Instant Adhesive 48061 1 lb. bottle impact and peel strength (-54°C to 82°C)
22423 25 ml syringe kit
22424 300 ml syringe kit 800,000 /
For all metals, including -65°F to 300°F
518 Flange Sealant
™ 51817 6 ml tube Red
aluminum flanges
3,750,000 N/A
(-54°C to 150°C)
51831 50 ml tube Thixotropic
51845 300 ml cartridge
QuickStix® 37127 19 g stick White
General purpose,
Semisolid N/A
-65°F to 300°F
561™ Thread Sealant portable, overhead (-54°C to 150°C)
56507 6 ml tube
56531 50 ml tube
56541 250 ml tube -65°F to 300°F
565™ Thread Sealant 56571 300 ml cartridge
White Controlled strength 300,000 N/A
(-54°C to 150°C)
56543 1 liter bottle
56566 10 liter bottle
56707 6 ml tube
56747 50 ml tube
For stainless steel and -65°F to 400°F
567™ Thread Sealant 56765 250 ml tube White
all other metal fittings
540,000 N/A
(-54°C to 204°C)
33241 350 ml brush can
56790 1 liter bottle
68005 0.5 ml capsule
68015 10 ml bottle
680™ Retaining 68035 50 ml bottle Green
High strength for
1,250 N/A
-65°F to 300°F
Compound 68060 250 ml bottle
slip-fitted parts (-54°C to 150°C)
68090 1 liter bottle
19269 1.75 fl. oz. glass bottle Use with threadlockers,
Clear/
7649™ Primer 21348 4.5 oz. net wt. aerosol can
Green
thread sealants and 2 N/A N/A
19266 1 gallon can retaining compounds
Fixmaster® Metal 98853 4 oz. stick Grey Kneadable metal epoxy Paste N/A
Max Temp
Magic Steel™ 250°F (121°C)
Nordbak® Brushable 98733 2 lb. kit
Grey
Wear resistant low Brushable
TBD TBD
Ceramic 98732 6 lb. kit friction coating Liquid
7|
N S F ® N O N - FO O D CO M P O U N D S
Low Strength / Small Screw / Purple - Ideal for Medium Strength - Removable strength, general-
fastener diameters of 1/4" (6 mm) and smaller; purpose threadlocking adhesive well suited for
long engagement length fasteners; and fasteners between 1/4" to 3/4" diameter (6 mm
components requiring occasional adjustment. to 20 mm). Applied to threaded components
Apply to threaded parts before assembly. before assembly, Loctite® 242® Threadlocker
Controlled lubricity for accurate clamp loads. has controlled lubricity for accurate clamp loads.
Parts can be disassembled with hand tools. Parts can be separated using hand tools.
Medium Strength / Green- A low viscosity, Heavy Body RTV Silicone - Superior flexibility and
medium strength threadlocker for pre-assembled adhesion. Provides instant seal. Excellent fluid
bolts up to 1/2" (12 mm) to secure them in resistance. Noncorrosive, low odor, low volatility.
place. Seals porosities in welds and metal parts. Black in color.
Secures set screws and other assemblies after
settings are completed. Seals welds and porous
metal parts. Protects threads from rust and
corrosion. Localized heating and hand tools are
needed for disassembly.
|8
N S F ® N O N - FO O D CO M P O U N D S CO N T I N U E D
Tip:
Primer is optional with: Active surfaces –
brass, copper, bronze, iron, soft steel, nickel.
Loctite® Food Grade Grease
Primer is required with: Inactive surfaces –
aluminum, stainless steel, magnesium, zinc,
Extreme pressure grease with temperature black oxide, cadmium, titanium, others.
resistance to 450°F (232°C). NLGI Grade 2 rated.
Protects after flush-outs and steam cleaning.
TORQUE IN./LBS.
ITEM PACKAGE TEMPERATURE CFIA
PRODUCT NAME COLOR TYPICAL USE (M10 STEEL NUTS &
NUMBER TYPE / SIZE RANGE LISTED
BOLTS) BREAK/PREVAIL
22221 10 ml bottle Small screws -65°F to 300°F
222MS™ Threadlocker 22231 50 ml bottle
Purple
under 1/4" (6 mm)
53 / 30
(-54°C to 150°C)
24205 0.5 ml capsule
24221 10 ml bottle Removable grade,
-65°F to 300°F
242® Threadlocker 24231 50 ml bottle Blue up to 1/4" to 3/4" 110 / 43
(-54°C to 150°C)
24241 250 ml bottle (6 mm to 20 mm) bolts
24243 1 liter bottle
26205 0.5 ml capsule
26221 10 ml tube
Medium to high strength locking, -65°F to 300°F
262™ Threadlocker 26231 50 ml bottle Red
up to 3/4" (20 mm) bolts
189 / 275
(-54°C to 150°C)
26241 250 ml bottle
26243 1 liter bottle
29005 0.5 ml capsule
29021 10 ml bottle
Wicking grade for -65°F to 300°F
290™ Threadlocker 29031 50 ml bottle Green
pre-assembled parts up to 1/2" (12 mm)
90 / 260
(-54°C to 150°C)
29041 250 ml bottle
29043 1 liter bottle
58730 70 ml tube
58775 300 ml cartridge Forms tough, flexible gaskets; -75°F to 500°F
587™ Blue Gasket Maker 58791 17 liter pail
Blue
fills gaps to 0.25"
N/A
(-59°C to 260°C)
40462 190 ml can
20166 300 ml cartridge
High adhesion, -65°F to 500°F
5900® Flange Sealant 20167 50 lb. pail Black
instant seal
N/A
(-59°C to 260°C)
20168 550 lb. drum
1228666 2 oz. tube
1167237 8 oz. brush-top can Protects after flush-outs
Food Grade Anti-Seize 1169241 2 lb. can
White
and steam cleaning
N/A 750°F (400°C)
1170163 40 lb. pail
Extreme pressure grease; protects
Food Grade Grease 51252 14.5 oz. cartridge White
after flush-outs and steam cleaning
N/A 450°F (232°C)
22355 15 oz. net wt. aerosol
ODC-Free Cleaner & 20162 16 fl. oz. pump spray Clear
Cleaning and degreasing surfaces
N/A N/A
Degreaser (Naphtha) 20260 1 gallon can
to be bonded with adhesives
19269 1.75 fl. oz. glass bottle
Clear/ Use with threadlockers, thread
7649™ Primer 21348 4.5 oz. net wt. aerosol can
Green sealants and retaining compounds
N/A N/A
19266 1 gallon can
9|
Reliability starts here...
At Henkel Corporation, we invent more than just quality Loctite® brand products – we
provide solutions to industries’ biggest challenges. We are dedicated to earning and
keeping the trust of our customers. Together, with your skilled tradesmen and operators
at the base component level, during installation, repair and rebuild, Henkel can help
increase the reliability of the valuable equipment in your plant.
Customized to your plant's needs, this training will review common failure causes and
prevention, product selection assistance and comprehensive training materials. Just contact
your local Loctite® product specialist at the numbers below to schedule a workshop today.
| 10
U.S.A. Canada
Henkel Corporation Henkel Canada Corporation
One Henkel Way 2515 Meadowpine Blvd.
Rocky Hill, CT 06067 Mississauga, Ontario L5N 6C3
Tel: 800.562.8483 Tel: 1.800.263.5043 (within Canada)
Tel: 860.571.5100 Tel: 905.814.6511
www.henkelna.com/food Fax: 905.814.5391
www.henkelna.com/cfia
Except as otherwise noted, all marks used are trademarks and/or registered trademarks of Henkel and/or its affiliates in the U.S. and elsewhere.
® = registered in the U.S. Patent and Trademark Office. © 2013, Henkel Corporation. All rights reserved. 10837 / LT-5086 (7/13)