Professional Documents
Culture Documents
Trafic Recognition Coding For MQB Platform
Trafic Recognition Coding For MQB Platform
Trafic Recognition Coding For MQB Platform
Long Coding 2
Byte 01 Enable Bit 0
Byte 04 Enable Bit 0
Byte 06 Enable Bits 0 and 1
Byte 07 Enable Bits according to your MIB type (Standard/High) *Note if you have ‘High’ but have issues with traffic
signs you’ll want to tick Bits 0 and 2*
Long Coding 1 (tick if below did NOT get ticked while doing Long Coding 2)
-coding_VZE (enabled)
-VZE_Cam type (MQB_MFK)
Adaptions
find in the menu ‘’function_module_road_sign_recognition’’ change to ‘activated’
find in the menu ‘VZF_country_code’ change to ‘0’
find in the menu ‘VZE_show_administrative_speed_limits’ change to ‘show_always’
find in the menu ‘VZE_show_valid_additional_signs’ change to ‘activated’
find in the menu ‘VZE_prioritize_moisture’ change to ‘not activated’
find in the menu ’VZE_sorting_valid_signs’ change to ‘174’
find in the menu ‘CCP_interface’ change to ‘not activated’
find in the menu ’VZE_sorting_alternative_signs’ change to ‘425’
Set all 6 functions related to ‘Dev_messages……’ to ‘not activated’
find in the menu ‘mask_error_reactions_for_development’ change to ‘not activated’
Set all 4 ’masked_fault_classes’ to ‘255’
find in the menu "road sign detection fusion mode" change the value to "road sign fusion"
find in the menu "display end of speed limit symbol" change the value to "active"
find in the menu "display no passing allowed" change the value to "active"
find in the menu ‘predictive route data run time’ change the value to "0 ms"
find in the menu "display valid additional signs" change the value to "100111"
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Unit 5F
Long Coding 2
Byte 24 Enable Bit 6 to make traffic signs appear
Byte 24 Enable Bit 7 for Predictive Route Data (Mandatory otherwise you'll get the error!)
Long Coding 1 (tick if below did NOT get ticked while doing Long Coding 2)
Byte_3_Country_Navigation (choose your region)
Byte_24_Navigation_System (activated)
Byte_24_VZA (activated)
Adaptions
Find ‘Vehicle configuration’ and inside look for:
-‘VZAPro’ and set to ‘ON’
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Unit 17
Long Coding 2
Byte 05 Enable Bit 2
Long Coding 1 (tick if below did NOT get ticked while doing Long Coding 2)
-traffic_sign_display_BAP (YES)
-traffic_sign_detection (YES)