This document provides information on assembly tool number 132 for cutting and clamping 10-pole connectors. It describes the tool's design, manufacturer, part number, minimum stock level, intended use, and notes including applicable working instructions and crimp heights. A schematic sketch is also included. Revision details are provided at the bottom.
This document provides information on assembly tool number 132 for cutting and clamping 10-pole connectors. It describes the tool's design, manufacturer, part number, minimum stock level, intended use, and notes including applicable working instructions and crimp heights. A schematic sketch is also included. Revision details are provided at the bottom.
This document provides information on assembly tool number 132 for cutting and clamping 10-pole connectors. It describes the tool's design, manufacturer, part number, minimum stock level, intended use, and notes including applicable working instructions and crimp heights. A schematic sketch is also included. Revision details are provided at the bottom.
Design Supplier Hersteller: Tyco-AMP Manufacturer Produktionsmittellager Zeichnungs-Nr.: --- production equipment store Drawing No Bestell-Nr.: 0-0872043-1 (Aktuellen Preis bei PML VIB anfragen) Part No (Ask for current price PML!) Mindestbestand: (nur für PML) --- Minimum Stock Bezeichnung: Hand tool for cut and clamp connector 10polar Abisolierung: --- Name Strip length Beschreibung: Ausziehwerte: Description Pull out Force The contact carrier that has to be processed has to be pushed in from the with closed left side into the guide strip until the contact that has to be provided is insulation clamp appropriate to the locking steps exactly in front of the indenter. Push 0,22 mm² ≥ 30N [33N] cable between the holder clamps of the indenter into the insertion drill 0,35 mm² ≥ 30N [33N] hole (approx. 1mm). Consequently the cable is cut straight at the following pressure process and positioned right at the same time. Compress lever of the tongs consistently until it terminates. At the same time hold the cables as long as the holder clamps close. Let lever of the tongs glide back slowly. When releasing the lever of the tongs the indenter returns to the starting position and the contact carrier is transported by one locking step. [] = incl. Safety allowance Verwendung für welche Teile: Usage for
G 10 41 001 G 10 41 006 G 10 42 004 G 10 42 009 G 10 42 014
G 10 41 002 G 10 41 007 G 10 42 005 G 10 42 011 G 10 42 019 G 10 41 003 G 10 41 008 G 10 42 006 G 10 42 012 G 10 42 022 G 10 41 005 G 10 41 009 G 10 42 007 G 10 42 013
Bemerkungen: See working instruction AM 135
Notes Crimp heigth for 0,35 mm² = 1,50 ± 0,15, for 0,22 mm² = 1,45 ± 0,15 Attention: Damaged parts have to be renewed!
Skizze: Schematic
AMP
working instruction 12.08.04 Stadlbauer Datum Name
changed Date Name AM 135 removed/ 20.03.02 Grötzinger bearbeitet 03.08.89 Reithmaier AC 024 added 132 Done by crimp height 25.09.01 Grötzinger geprüft 13.09.04 Katzikowski changed checked Änderung Datum Name Hilfswerkzeugfreigabe 27.09.04 Ertelt Revision Date Name Assembly tools release Stand / Datum: 10 / 2000 / FP010958-A / D6 Dieses Dokument wurde mittels EDV erstellt und ist auch ohne Unterschrift gültig! This document was prepared by EDP and is also valid without signature!