Professional Documents
Culture Documents
Piping Interview Questions - Part 02
Piping Interview Questions - Part 02
Engineering ➥ Engg. Interview ➥ Science & Tech ➥ Aptitude & Reasoning ➥ G. K. ➥ Competitive Exams
Text to Search...
3. Online Quizzes
Piping Interview
4. Technical Terms
Question No. 26
Question No. 28
Automobile Engineering How Centrifugal compressors work?
1. MCQ Practice Tests Answer: High-speed impellers increase the kinetic energy of the gas, converting this energy into higher pressures in a
divergent outlet passage called a diffuser. Large volume of gas at moderate pressure.
3. Mock Test (Level I)
Question No. 29
4. Mock Test (Level II)
What are types of steam turbine and why are they popular?
Answer: Condensing and non-condensing, Popular because can convert large amounts of heat energy into
3. Online Quizzes
mechanical work very efficiently.
4. Technical Terms
Question No. 30
5. Automobile Projects Where gas turbine drive is used?
Answer: Desserts and offshore platforms where gas is available, for gas transmission, gas lift, liquid pumping, gas re-
6. Automobile Interview
injection and process compressors.
Question No. 31
Civil Engineering What are the auxiliary equipments of compressor?
Answer: Lube oil consoles, Seal oil consoles, Surface condensers, Condensate pump, Air blowers, Inlet air filters,
1. MCQ Practice Tests waste heat system, compressor suction drum, knock out pot, Pulsation dampner, volume bottles, Inter and after
coolers.
2. Mock Tests (Level I)
Question No. 34
Electrical Engineering What are the compressor housing design points?
Answer: Floor elevation, building width, building elevation, hook centerline elevation.
1. MCQ Practice Tests
Question No. 35
2. Mock Tests (Level I)
What are the types of compressor cases?
3. Mock Tests (Level II) Answer: Horizontal split case, Vertical split case.
4. Online Quizzes
Question No. 36
5. Electrical GK MCQ How to located temperature and pressure instruments?
Answer: Temperature in liquid space, at down-comer side and pressure in vapour space, in area except down-comer
6. Electrical Lab Viva
sector.
Question No. 37
Chemical Engineering What are necessary parts of inlet line of compressor?
Answer: Block Valve, Strainer, Break out flanges in both inlet and outlet to remove casing covers, Straightening vane
1. MCQ Practice Tests in inlet line if not enough straight piece in inlet line available, PSV in interstage line and in discharge line before block
valve.
2. Mock Tests (Level I)
Question No. 38
3. Mock Tests (Level II) What points to be considered for reciprocating compressor piping layout?
Answer: High pulsation, simple line as low to grade as possible for supporting, analog study, all branches close to line
4. Online Quizzes
support and on top, Isolate line support from adjacent compressor or building foundations
Question No. 39
Computer Science What are the types of compressor shelters?
Answer: On ground with no shelter, Open sided structure with a roof,
1. MCQ Practice Tests Curtain wall structure (Temperate climates), Open elevated installation, Elevated multi-compressor structure.
3. History of India
4. Books and Authors Question No. 43
What are necessary nozzles for non-pressure vessel?
5. Economics and Indian Answer: Inlet, outlet, vent, manhole, drain, overflow, agitator, temperature element, level instrument, and steam-out
Economy connection.
Question No. 47
What is preferred location for steam out nozzle on drum?
GK MCQ : Indian Railways Answer: At the end opposite to the maintenance access.
GK International MCQ Answer: Must be anywhere in the vapor space, preferable at the top section of drum